Manufacturer:
(Category: 502)
Bollegraaf HBC 120 baler, built in 2021, very good condition Specifications: Manufacturer: Bollegraaf Type: HBC 120 Year of Make: 2021 Pressing force: 120 t Drive power: 90 kW Total power: 141 kW Capacity at 30 kg/m³: 16.2 t/h 50 kg/m³: 25 t/h 100 kg/m³: 47 t/h Bale size: 1100 x 720 mm (WxH), length variable Bale weight: 550-880 kg Binding: 5-fold vertical Dimensions: approx. 11750 x 2500 x 4590 mm (LxWxH) Weight: approx. 31,600 kg Materials: paper, cardboard, foil, PET, beverage cans, textiles. The press is in very good condition. It is still in operation for about 4 months and can be visited under operating conditions on request. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offers are subject to change, subject to prior sale and can be revoked at any ti ...
Vertical baler HSM V-Press 1160 eco, built in 2017 Specifications: Manufacturer: HSM Type: V-Press 1160 plus Year of Make: 2017 Hours: Press force: 55 t Drive power: 4 kW Idle cycle time: 25 s Filling height: 1115 mm Filling opening: 1195 x 650 mm Bale size: 1200 x 1100 x max. 1200 mm Bale weight: 550 kg Dimensions: 1780 x 1388 x 2200 mm (WxDxH) Weight: 2200 kg Materials: paper, cardboard, foil Remark: The press is in very good condition. The operating instructions including circuit and hydraulic diagram are available. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offers are subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale ...
In the inlet: Presto CC 40 M baler with lift-tilt device Specifications: Manufacturer: Presto Type: CC 40 M Year of Make: 2017 Press force: 40 t Cycle time: 34 s Drive power: 15 kW Filling opening: 1080 x 1100 mm Filling volume: 0.85 m³ Binding: 4-ply, polyester strap, manual Throughput at bulk density of 35 kg/m³ - 1.8 t/h 60 kg/m³ - 2.5 t(h 100 kg/m³ - 3.1 t/h Bale dimensions: 750 x 1100 mm Bale weight: 400 kg Dimensions: 3650 x 1590 x 2010 mm (LxWxH) Machine weight: approx. 3800 kg Materials: paper, cardboard, foil Remark: Fully automatic regulating channel outlet, lift-tilt device for MGB 660, 770 and 1100 L empty containers. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is subject to change, subject to prior sale and can be revoked at any tim ...
Strautmann baler, type BaleTainer, press force 60 t, year of manufacture 2022, in the pipeline. More pictures will follow. Specifications: Manufacturer: Strautmann Umwelttechnik Type: BaleTainer Year of Make: 2022 Pressing force 60 t Total connected load 9.2 kW Filling opening height 1370 mm Filling opening width 1069 mm Bale dimensions 1,100 x 1,100 x 800 mm (W x D x H), 3 discs Bale weight up to 400 kg (3 discs) Binding 4-fold vertical Machine dimensions with feed: 6,355 x 2,056 x 2,756 mm (L x W x H) Weight approx. 7,500 kg Materials: paper, cardboard, PET bottles, foil Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale against ...
Just arrived: Presto HPK 50 HS baler, built in 2015 Manufacturer: Presto Type: HPK 50 HS Year of Make: 2015 Drive: 30 KW Press force: 50 t Hours: 7145 Filling opening: 1600 x 650 mm (LxW) Channel cross-section: 700 x 950 mm Filling volume, max. 1.06 m³ Cycle time: 20 s Binding: 4-fold throughput at 35 kg/cbm: 5.5 t/h 60 kg/cbm: 8.8 t/h 100 kg/cbm: 12.7 t/h Bale weight: up to 500 kg Machine dimensions: 8420 x 1900 x 2400 mm (LxWxH) Machine weight: approx. 10,500 kg Materials: paper, cardboard, foil, PET bottles Remark: The press has just arrived at our warehouse. More photos will follow. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The ...
Vertical baler HSM V-Press 1160 plus, built in 2016 Specifications: Manufacturer: HSM Type: V-Press 1160 plus Stock No.: 9960 Year of Make: 2016 Press force: 55 t Drive power: 4 kW Idle cycle time: 25 s Filling height: 1115 mm Filling opening: 1195 x 650 mm Bale size: 1200 x 1100 x max. 1200 mm Bale weight: 550 kg Dimensions: 1700 x 1800 x 2200 mm (WxDxH) Weight: 2430 kg Materials: paper, cardboard, foil The instruction manual is available. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offers are subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale is made ex location, without guarantee and guarantee. Our payment term is 100% prepay ...
Presona LP 85 VH2 cross-tying baler, built in 2018 Specifications: Manufacturer: Presona Sweden Type LP 85 VH2 Year of manufacture 2018 Drive power 2 x 45 kW Operating hours 40,350 Effective operating hours approx. 22,000 Press force pre-press 28 t Press force main press 85 t Insertion shaft 1500 x 1100 mm Bale dimensions 750 x 1100 mm Bale weight 450 - 650 kg Theoretical volume: 1200 cbm/h Throughput at 30-100 kg/cbm: 13-30 t/h Tying 5-fold vertical, 3-fold horizontal Oil tank capacity 2000 L Transport dimensions press 10400 x 2400 x 2800 mm (LxWxH) Weight approx. 27000 kg The press was dismantled from ongoing operations. A spare parts package is included. The technical documentation is available. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is subje ...
Baler Paal Konti 200 D, built in 2000, optionally with matching conveyor belt Paal KEM-1400 Specifications: Manufacturer: Paal Type Paal Konti 200 D Year of construction 2000 Hours: 28155 Pressing force 60 t Drive power 45 kW Total connection 60 kW Filling opening 1020 x 1400 mm Bale dimensions 750 x 1100 mm, length variable 4-fold automatic tying Throughput at 35 kg/m³ approx. 9.5 t/h 60 kg/m³ approx. 16.5 t/h 100 kg/m³ approx. 26 t/h Bale weight 450 to 650 kg Transport dimensions approx. 10123 x 2152 x 2720 mm (LxWxH) Machine weight approx. 15,000 kg Materials: paper, cardboard, foil The press was dismantled from ongoing operations. The conveyor belt shown in the pictures is not part of the scope of services. The complete documentation is available. Please note: All technical data refer to the manufacturer's specifications. We assume no liabili ...
Presto CC 13 V baler, built in 2003, in the pipeline Specifications: Manufacturer: Presto Type: CC 13 V Year of Make: 2003 Pressing force: 13 t Cycle time: 24 s Drive power: 4 kW Filling opening: 780 x 750 mm Filling volume: 0.39 m³ Binding: 3-fold, automatic Throughput at bulk density of 35 kg/m³ - 1.7 t 60 kg/m³ - 2.5 t 100 kg/m³ - 3.8 t Bale dimensions: 700 x 750 mm Bale weight: up to 250 kg Dimensions: 2800 x 1050 x 1830 mm (LxWxH) Machine weight: approx. 1900 kg Materials: paper, cardboard, foil Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale against advance payment is made ex works, without warranty or guarantee.
: neu : ca. 10 Wochen ab Auftrags : Italien : 50 to: 3.5 mm: 800 mm: 450 mm: 22 - 110 mm: 60 - 100 1/min: 70 mm: 8 : 70 mm: 235 mm: 290 mm: 5.5 kW: 1330 mm: 1000 mm: 2650 mm: 4500 kgtouch screen controlsemi automatic stroke adjustmentdie space adjustment with mechanical display decimal resolutionadjustable motor speedoverload protectordouble bolster plateoil circular lubricationdynamic brakesafety light guard KeyenceAutomation and control of press parameters by PLC, alarms and informations displayd on human machine interface touch screen.Standard monitoring:- press speed view and adjustment- programmable piece counter and maintenance piece counter- die space adjustment with brake motor- Semi automatic or automatic stroke adjustment- die safety control- alarms view- overload protectorThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Technical data baler:Manufacturer according to type plate BRAMIDAN (original manufacturer Presto GmbH & Co. KG) Type HC 50 (corresponds to the Presto HPK 50)Year of manufacture 2007Operating hours 13,209 hours, as of MarchNumber of bales pressed: 23,379 balesPressing force 50 tonnesSpecific pressing force 650 kN/m²Feed chute dimensions 1250 x 1050 mm (L x W)Filling volume 0.96 cm³Theoretical cycle time 32 secondsTheoretical throughput capacity 108 m³/hourBale dimensions 1100 x 700 mm (w x h) length variableDrive power 15 kWPower consumption, total in 50 ATying 4-fold vertical, fully automaticThroughput rates with abulk density of 30 kg/cbm approx. 3.1 t/hourBulk weight of 60 kg/cbm approx. 4.5 tonnes/hourBulk weight of 100 kg/cbm approx. 7.2 tonnes/hourBale weights with a bale length of approx. 1.2 m up to 500 kg, depending on materialHydraulic oil tank capacity 400 litresPLC control ...
Technical data baler:Manufacturer Riko Ekos d.o.o Type S-60K (5)Year of construction 2019Operating hours 673 hours, as of August 24Number of pressed bales 1,127 bales, as of August 24Pressing force main press 60 tonnesDimensions of feed chute 1,100 x 1,400 mmFilling volume / pressing cycle 2.1 m³Bale dimensions 720 x 1,100 mm (W x H), the length is variableDrive power 37 kWConnected load, total 47 kWTying 4-fold horizontal, fully automaticThroughput capacity with abulk density of 30 kg/cbm approx. 5 - 6 tonnes/hourBulk weight of 50 kg/cbm approx. 9 - 11 tonnes/hourBulk weight of 100 kg/cbm approx. 15 - 19 tonnes/hourFilling volume of hydraulic oil tank 800 litresPLC control Siemens SIMATIC S7-1200Siemens SIMATIC HMI control panel Press dimensions assembled without hopper and chute 12,220 x 3,654 x 2,685 mm (L x W x H)Effective transport dimensions excluding press, with dismantled tying ...
Technical data baler:Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, GermanyType AVOS 1410-45/80Year of construction 2009Operation hours 20,536 hours, as of September 2024Press power main press 80kNSpecific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mmTheoretic cycle time 12 secTheoretic throughput capacity 300 m³/hBale size 1,100 x 750 (w x h), the length is variableDrive power 45 kWConnected load 75 kWTying system 4-fold, vertical, fully automaticThroughput capacity at abulk weight of 30 kg/cbm approx. 6,0 t/hbulk weight of 50 kg/cbm approx. 10,5 t/hbulk weight of 100 kg/cbm approx. 17,5 t/hBale weight with a bale length of approx. 1.2 m up to 600 kg, depends on materialSPS controller Siemens S7-300Operating panel pulsotronicBaler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h)Transport weight baler approx. 16 tSpecial equipment:Wear-resistant floor made of HA ...
Technical data on the EPS (Polystyrene) press:Manufacturer FZ-Recycling GmbH & Co. KG, GermanyType FZR 320Year of construction 12/2022Drive power shredder 4 kWDrive power of compactor screw 7.5 kWDrive power hydraulic unit for the holding clamp in the press channel 1.1 kWTotal connected load 12.6 kWCurrent consumption 32 ACompaction ratio of the compacted blocks to the original product approx. 50:1 (depending on material)Block weight after compaction approx. 300kg/m³ (depending on material)Block dimensions 320 x 320 mm, variable lengthThroughput approx. 100 kg/hour, depending on materialAchievable density approx. 250 - 300 kg/m³The pressed blocks are stacked approx. 1400 mm high on pallets and stretch-wrapped.Machine dimensions approx. 4,600 x 1,400 x 1,980 mm (l x w x h)Transport weight press 1,325 kgCondition of the baler:The press was only used sporadically, is in very good conditio ...
For sale is a used baling press system consisting of a chain belt conveyor for underfloor operation, with a feed hopper, a hydraulic pre-compactor with whirlulator, a MACPRESSE 111A baling press, two complete wire drawing frames with 5 wire reel stands each, without wire.Technical data baler:Manufacturer MACPRESSE EUROPA S.R.L.Typ 111AYear of construction 1996, refurbished in 10/2024Press power main press 170 tonsSpecific press capacity 14 kg/cm²Feed channel 1,800 x 1,020 mmFilling volume 2,5 cm³Theoretic throughput rate 750 m³/hBale size 1,100 x 1,100 mm, length variableDriving motor 2 x 55 kWTying system 5-fold horizontal, full automaticThroughput rate at a approx. 30 up to 35 tons/h, depends on materialVolume hydraulic oil tank 3,000 lTransport dimensions of press with new machine feets 113,700 x 2,300 x 2,900 mm (l x w x h)Machine weight baler approx. 40 tonsComments:The baler was ...
For sale is a overhauled baler, with 100 tonnes pressing force, large format 1100 x 1100 mm, 75 kW drive power and 10-fold cross bindingTechnical data baler:Manufacturer BollegraafTyp HBC 110 K / 75 kWYear of construction 2007Press power main press 100 tonsPress power of pre-press 50 tonsOperating hours 22,605 hoursFeed channel 1,600 x 1,100 mmCapacity per cycle time 3,15 m³Theoretic cycle time 19 sec.Bale size 1,100 x 1,100 mmDriving motor 75 kWConnected load 126 kWFull load current 238 ATying system 5-fold vertical, 5-fold horizontal, fully automatedThroughput rate at abulk weight of 30 kg/cbm approx.16 tons/hbulk weight of 50 kg/cbm approx. 25 tons/hbulk weight of 100 kg/cbm approx. 47 tons/hBale weight up to 1400 kg, depends on material and bale lenghtVolume oil tank approx. 1,300 lSPS controller Telemecanique TSX MicroOperating panel Schneider MAGELIS TouchBaler dimensions built up ...
Technical data baler:Manufacturer BollegraafType HBC 140Year of construction 2017Working hours 13,284, as of October 2025Press power main press 140 tons (max. 153,5 tons)Press power of pre-press 70 tonsFeed channel 1,600 x 1,100 mm (l x w)Capacity per cycle time 4,34 cbmTheoretic cycle time 16 sec.Bale size 1,100 x 1,100 mm (w x h), length adjustableDriving motor 2 x 75 kWConnected load 209 kWTying system 5-fold vertical, fully automatedThroughput rate at abulk weight of 30 kg/cbm approx. 30 tons/hbulk weight of 50 kg/cbm approx. 46 tons/hbulk weight of 100 kg/cbm approx. 82 tons/hBale weight 850 up to 1.500 kgHydraulicoil 2.600 l Univis N46Baler dimensions with conveyor built up with hopper approx.13,200 x 24,200 x 7,333 mm (l x w x h)Transport dimensions only baler approx.13,200 x 2,884 x 3,539 mm (l x w x h)Machine weight baler approx. 51,810 tonsTechnical data feeding and elevating c ...
Technical data baler:Manufacturer HSM GmbH + Co. KG, GermanyType VK 8818 R-FUYear of construction 2012Total operating hours: 12,078 hours, as of September 2025Pump operating hours 6,616 hours (effective pump running time)Number of bales pressed: 65,792 bales, as of September 2025Main press force 880 kNSpecific pressing force 120 N/cm²Pressing force cutting edges free rammer 120 kN Dimensions of feed chute 970 x 1,800 mm Theoretical cycle time in idle mode 8.3 secondsTheoretical throughput capacity 643 m³/hourBale dimensions 1,100 x 750 mm, the length is variable 600 up to 2000 mmDrive power 2 x 45 kW frequency-controlledConnected load 98 kWTotal current consumption 192 AFuse protection 250 A slow-blow5-fold horizontal tying, fully automaticThroughput rates with abulk density of 20 kg/cbm 12.86 t/hourBulk weight of 50 kg/cbm 32.15 t/hourBale weights with a bale length of approx. 1.2 m 6 ...
Technical information baler:Manufacturer HSM GmbH + Co. KGTyp VK 4812 Year of construction 2014Hours of operation 5,612 hours, stand August 2025Press power main press 48 tonsSpecific press capacity 58,2 N/cm²Feed channel 1,250 x 1,020 mmTheoretic cycle time 11.2 sec.Theoretic throughput rate 332 m³/hourBale size 1,100 x 750 x 600 up to 1,200 mmDriving motor 30 kWConnected load 32 kWRated current 59 ATying system 4-fold horizontal, fully automaticThroughput rate at abulk weight of 20 kg/cbm up to 6 tons/hourbulk weight of 50 kg/cbm up to 13 tons/hourBale weight up to 550 kg, depends on materialSPS controller Siemens SIMATIC S7-200Operating panel Siemens HMI Touch PanelFilling quantity hydraulic oil tank 300 LOil type HVI 46Machine installation dimensions with bale chute 10,046 x 4,387 x 2,705 mm (l x w x h)Transport dimensions baler 8,500 x 2,500 x 2,750 mm (l x w x h)Machine weight p ...
Technical data baler:Manufacturer BOAType 2040.S. 4V (6) 71.30Year of manufacture 2002Operating hours approx. 66,568 hours, as of October 2025Effective pump running time 13,614 hours, as of October 2025Number of bales pressed 139,167, as of October 2025Pressing force main press 71 tSpecific pressing pressure 9.0 kg/cm²Operating pressure 280 barDimensions of feed chute 1,620 x 1,080 mmBale dimensions 1,100 x 1,100 mm, length variably adjustable 800 up to 1,600 mmDrive power 45 kWTying system 4-fold vertical, fully automaticThroughput rates for quality:Bulk density 20?30 kg/m³, throughput capacity up to 9 tonnes/hourBulk density 40?60 kg/m³, throughput capacity up to 16 t/hourBulk density 80?100 kg/m³, throughput capacity up to 21 t/hourBulk density 100?150 kg/m³, throughput capacity up to 28 t/hourBale weight up to 600 kg/bale, depending on materialHydraulic oil tank capacity 800 lTr ...
Technical data baler:Manufacturer PaalTyp Konti 275 EYear of construction 2006Hours of operation in total 54,050 hoursPress power main press 80 tons at 300 barSpecific press capacity 9,7 kg/cm²Feed channel 1,600 x 1.020 mm (l x w)Throughput capacity under operating conditions 350 m³/hourBale size 750 x 1,100 mm, length variableDriving motor 75 kWConnected load 94 kWRated current 180 ATying system 4-fold vertical, fully automaticBale weight up to 750 kg, depends on materialVolume hydraulic oil tank 2,100 lSPS controller (manuf., type) Siemens Simatic S7-300Operating panel (manuf., type) Siemens Multi PanelTransport dimensions only baler 11,152 x 2,152 x 3,000 mm (l x w x h)Machine weight baler approx. 21 tonsCondition of the baler:The press and conveyor belt are in satisfactory working condition, see photo documentation. Further technical data and dimensions for the conveyor belt are no ...
Technical data baler:Manufacturer BollegraafTyp HBK 100Year of construction 2004Hours of operation 34,480 hoursPress power main press 100 tonsPress power of pre-press max. 42 tonsFeed channel 1,600 x 1,100 mmFilling volume 3.15 m³Theoretic cycle time 22 sec.Theoretic throughput capacity up to 450 m³/hourBale size 1,100 x 720 mm, lenght variableDriving motor 45 kWConnected load 60 kWTying system 5-fold vertical, fully automaticThroughput rate at abulk weight of 30 kg/cbm approx. 13 tons/hourbulk weight of 50 kg/cbm approx. 20 tons/hourbulk weight of 100 kg/cbm approx. 30 tons/hourThroughput rate with ruffler approx. 20 tons/hourBale weight 550 up to 750 kg, depends on materialVolume hydraulic oil tank 750 lSPS controller Telemecanique TSX MicroTransport dimensions only baler 10,900 x 2,320 x 3,300 mm (l x w x h)Machine weight baler approx. 19 tonsComments:Unlike the standard HBC pre ...
Technical data baler:Manufacturer Presona ABTyp LP 80 VHK 1Year of construction 2012Total machine operating hours 25,895 hours, as of July 2025Pump operating hours, effective 14,135 hours, as of July 2025Number of bales pressed 235,597 pieces, as of July 2025Press power main press 78,5 tonsSpecific press capacity 95 N/cm² Press power of pre-press 28 tonsVolume of pressing chamber 2,7 m³Feed channel1,500 x 1,100 mmTheoretic throughput rate 930 m³/hThroughput rate under operating conditions 410 m³/hBale size 750 x 1,100 mmDriving motor 55 kWTying system 5 fold vertical, 3-fold horizontal, full automaticThroughput rate with a bulk density of30 kg/m³ approx. 9 to 12 tonnes/hour, depending on material50 kg/m³ approx. 14 to 17 tonnes/hour, depending on material100 kg/m³ approx. 16 to 25 tonnes/hour, depending on materialThroughput capacity with MSW (Municipal Solid Waste) approx. 20 ...
Technical data baler:Manufacturer Presona AB, SwedenType LP 60 VH1Year of construction 2015Total operating hours, 30,143 hours, as of July 2025Effective pump running time onl 6,527 hours, as of July 2025Number of pressed bales 115,193 bales, as of July 2025Press force pre press 25 tMain press force 60 tonnesSpecific pressing force 73N/cm²Dimensions of feed chute 1,500 x 1,100 mmFilling volume / pressing cycle 2.7 m³Theoretical throughput capacity 800 m³/hourThroughput capacity under operating conditions 350 m³/hourBale dimensions 1,100 x 750 mmDrive power 37 kWTying 5-fold vertical, fully automaticThroughput capacity with aBulk weight of 50 kg/cbm 11 to 14 tonnes/hourBale weights 420 to 570 kg, depending on materialHydraulic oil tank volume 600 litresBaler dimensions assembled with hopper 10,100 x 3,750 x 4,310 mm (l x w x h)Transport dimensions excluding press 10,100 x 2,400 x 3,00 ...
For sale is a complete baling system consisting of conveyor technology, baling press and wire stations.Technical data baler:Manufacturer Bollegraaf Recycling Machinery B.V.Typ HBC 60AYear of construction 2000Hours of operation 32,169 hours, stand November 2024Press power main press 60 tonsPress power of pre-press max. 25 tonsFeed channel 1,320 x 1,100 mmTheoretic cycle time 18 sec.Bale size 1,100 x 720 mm, lenght variableDriving motor 45 kWConnected load 60 kWTying system 5-fold verticalThroughput rate at abulk weight of 30 kg/cbm approx. 5,5 tons/hourbulk weight of 50 kg/cbm approx. 10 tons/hourbulk weight of 100 kg/cbm approx. 16 tons/hourBale weight 400 up to 750 kg, depends on materialSPS controller Telemecanique TSX MicroMachine weight baler approx. 24 tonsScope of delivery:1 piece chain belt conveyor1 Bollegraaf HBC 60A baler with whirling unit1 maintenance platform with access lad ...
Technical data baler:Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, GermanyType AVOS 1410 BS-22/50Year of construction 2023Pump operation hours 1,851 hours, as of July 24Press power main press 70 t (a 70 tonne hydraulic cylinder is installed, special equipment)Specific press force 90,9 N/cm² (a 70 tonne hydraulic cylinder is installed, special equipment)Feed channel 1,400 x 1,000 mmTheoretic cycle time 13 secTheoretic throughput capacity 266 m³/hBale size 1,100 x 750 (w x h), the length is variableDrive power 22 kWConnected load 65 kWTying system 4-fold, vertical, fully automaticThroughput capacity at abulk weight of 30 kg/cbm approx. 5,5 t/hbulk weight of 50 kg/cbm approx. 7,5 t/hbulk weight of 100 kg/cbm approx. 9,7 t/hBale weight with a bale length of approx. 1.2 m up to 500 kg, depends on materialSPS controller Siemens S7-1500Operating panel Schneider HarmonyBaler dimensions ...
Technical data baler:Manufacturer Presona ABType LP 50 EH1Year of construction 2005Operating hours 30,408 hours, as of April Number of pressed bales 198,059 as of AprilPressing force main press 50 tonnes Specific pressing force 63 N/cm² Theoretical throughput capacity 530 m³/hourThroughput capacity under operating conditions 260 m³/hourDimensions of feed chute 1,250 x 1,100 mmBale chamber volume 2.2 m³Bale dimensions 1,100 x 720 mm, variable lengthDrive power 22 kWTying 5-fold vertical, fully automaticThroughput rates with abulk density of 30 kg/cbm 6 up to 7 tonnes/hourBulk weight of 50 kg/cbm 7 up to 9 tonnes/hourBulk weight of 100 kg/cbm 11 up to 14 tonnes/hourBale density (paper/newspapers) 400 to 550 kg/m³ Hydraulic oil tank capacity 600 litresPLC control Telemecanique TSX Micro Schneider Magelis control panelEffective transport dimensions excl. baler 8,125 x 2,300 x 3,000 mm ...
Technical data baler:Manufacturer Presto GmbH & Co. KGTyp CC 36 MYear of construction 2010Hours of operation 3,641 hPress power main press 36 tSpecific press capacity 467 N/cm²Feed channel 1.080 x 1100 mm (l x w)Cycle time 34 sec.Capacity per cycle time 0,85 m³Theoretic throughput rate 90 m³/hThroughput rate under operating conditions with a material bulk density of 35 kg/m³ approx. 51 m³/hourBale size 1100 x 750 mm (w x h), length variableDriving motor 15 kWTying 4-fold vertical, semi-automatic, with polyester synthetic yarnThroughput rate at abulk weight of 35 kg/cbm 1,8 to/hbulk weight of 60 kg/cbm 2,5 to/hbulk weight of 100 kg/cbm 3,1 to/hTransport dimensions only baler 4.200 x 1.640 x 2.200 mmMachine weight baler approx. 4 toComments:The press was checked for function in our workshop, then stored and is therefore available at short notice. The machine documentation (operating ...
Technical data baler:Manufacturer BOA Recycling Systems B.V.Type M75-45-A-5-1.6 EcolineYear of construction 2021Hours of operation 2,658 hours (as of May 2024)Number of pressed bales 42,212 pieces (as of May 2024)Press power main press 71,2 kN (71 t)Specific press capacity 9 kg/cm²Operating pressure 280 barCylinder stroke 2,200 mmFeed channel 1,620 x 1,000 mmCapacity per cycle time 2,4 m³Theoretic cycle time 21 secondsTheoretic throughput rate 450 m³/hourBale size 1,100 x 720 mm, length variably adjustable up to 1,400 mmDriving motor 45 kWConnected load 100 kWCurrent consumption 200 ATying system 5-fold vertical, fully automatic, the press stamp is prepared for an additional 3-fold horizontal bindingThroughput rate at abulk weight of 30 kg/cbm approx. 13,6 tons/hourbulk weight of 50 kg/cbm approx. 24,2 tons/hourbulk weight of 100 kg/cbm approx. 36,4 tons/hourbulk weight of 150 kg/cb ...
Technical data baler:Manufacturer Riko Ekos d.o.o Type S-60K (6)Year of construction 2019Operating hours 2,320 hours, as of August 24Number of pressed bales 4,359 bales, as of August 24Pressing force main press 60 tonnesDimensions of feed chute 1,100 x 1,400 mmFilling volume / pressing cycle 2.1 m³Bale dimensions 720 x 1,100 mm (W x H), the length is variableDrive power 37 kWConnected load, total 47 kWTying 4-fold horizontal, fully automaticThroughput capacity with abulk density of 30 kg/cbm approx. 5 - 6 tonnes/hourBulk weight of 50 kg/cbm approx. 9 - 11 tonnes/hourBulk weight of 100 kg/cbm approx. 15 - 19 tonnes/hourFilling volume of hydraulic oil tank 800 litresPLC control Siemens SIMATIC S7-1200Siemens SIMATIC HMI control panel Press dimensions assembled without hopper and chute 12,220 x 3,654 x 2,685 mm (L x W x H)Effective transport dimensions excluding press, with dismantled tyin ...
RDA Recycling Machinery GmbH 
