subcategories
(3rd category level)
Manufacturer:
(Category: 704)
for dosing sauerkraut or red cabbage into flow packs (without flow pack machine),, Dosage 250 g to 500 g Speed of the screw dosing frequency controlled,, 40 beats per minute possible,, different programs can be saved., power: up to 40 cycles / min
L-Elevator with water connection in the inlet, Blue plastic link belt with carriers Usable width: approx. 1,000 mm,, straight section: approx. 1,600 mm (usable), Elevating conveyor: Usable length: approx. 2,400 mm, Basin dimensions: LxWxH: approx. 2,900 x 1,400 x 1,100 mm or, height measured from the belt approx. 370 mm, Discharge height: approx. 2,350 mm, Carrier height: approx. 100 mm, Distance between the drivers approx. 200 mm, From the manufacturer’s :, The PREP-WASH pre-wash tank is used for washing fresh fruit. In the first part of the tank, a water stream conveys the fruit onto a modular PU conveyor belt, which also collects non-floating fruit. The rinsing tank is equipped with a circulation pump and a water filter. The belt speed can be controlled using a frequency converter in the machines control cabinet. Two openings on either side of the tank allow for easy cleaning after ...
The treatment tank is designed to prevent fruit oxidation and is ideal for processing apples, pears, pineapples, melons, oranges and other types of whole and cut fruits., Blue plastic link belt with attached carriers,, Usable width: approx. 1,100 mm,, Usable length: straight section: approx. 1,700 mm, rising section: approx. 1,250 mm,, Driver height: approx. 80 mm, distance between the drivers: approx. 150 mm,, Feed height: approx. 1,070 mm,, Discharge height: approx. 1,120 mm,, Fan in the outlet,, With side-mounted dosing system (screw) Overall dimensions: approx. 4.5 x 1.8 m., From the manufacturer’s :, Thanks to the optional conductivity regulator and dosing system, the tank is an excellent ally in fruit processing. Combined with your preferred fruit preservation liquid, excellent results can be achieved, including protecting flavors and avoiding the risk of oxidation. The system ha ...
Stephan PrimeCut12 Universal Machine Two speeds: 1440/2880rpm Stainless steel kettle removable transparent plastic lid Crank for actuating the mixing blade Machine has considerable signs of use, the lid is covered with hairline cracks due to cleaning in the dishwasher, which do not impair the function, but are unsightly. Just like the stirring blade in the lid. The machine is equipped with a knife insert and a mixing insert and should always be thoroughly cleaned before use. Video about the test run available on YouTube
The machine can be loaded by one or two people., The cabbage head is placed sideways into the pot, with the stalk facing vertically upwards., The receiving pots mounted on the hinged belt chain transport the cabbage heads to the drilling position., The pneumatic lifting cylinder lowers the drill until the initiator is triggered when the preset, drilling depth is addressed., The drill is moved upwards., With the next work cycle, the drilled products are transferred to the deflection side, subsequent machine or into a provided container., Belt drive: SEW, 0.55 kW, Drilling motors: ABB, 1.1 kW, Selection: Right/left rotation of the drill is possible, White cabbage/red cabbage:, In the case of red cabbage, the stalk must be completely drilled out due to a high concentration of hydrogen cyanide., The stalk parts required for sauerkraut fermentation, however, remain in the white cabbage., Dime ...
used to cut cabbage heads for sauerkraut production,, diameter of the cutting discs: 800 mm,
Disc cutting machine,, With 2V-shaped feed belts,, Product passage opening 70 mm,, with brake motor,, Capacity depending on product type, slice thickness and feed speed 1,300-2,800 kg/hour., Slice thickness depending on the pitch of the knife head, number of knives within the pitch, the knife angle and the product properties, it is missing:, control cabinet,, knife wheel,, hold-down device,, Enclosure via hold-down device,, Magnetic limit switch on the housing, no CE marking, power: up to max. 2.8 tons / hour
Tilting frying pan 150L with stirrer, - Agitator with Teflon wiper, - Heating with thermal oil 240 C°, - Temperature query heating thermal oil PT 100, - Lid operation manually, - Cover seal profile seal, - Control: Aditec microprocessor controller, Electrical values, - Power: 26 KW Voltage: 400V Frequency: 50 HZ Phase: 3 N/PE TN-S
Gears, hubs, bushings, chain pinions, round and chopping knife shafts, rotor shaft, scraper comb,, Chopping shaft with 6 knives (cubes with 15 mm blade length),, Knife head for Herbort Schneider 26C,, for cutting machine 122 N:, Circular knife shaft complete with 91 knives - 2.8 mm cut,, Flat knife - holder without knife for 2.8 mm cut,, Round knife - shaft with nut, without knife,, Mincer shaft pitch 28 for 10 mm cubes - without knife, Complete list on request
Stainless steel machine for industrial filling of thin liquid products by gravity, Solenoid valve dispensers are specially designed for filling thin-liquid products. Partial dosing or full filling (cold or hot filling) can be used. in cans, jars and bottles take place., By using an interchangeable star and a manual height adjustment, a short-term changeover to a different can, jar, or bottle size. The dosing range can be expanded as required using time-controlled valves., 4-digit in-line filler for dosing liquids,, was used for brine for sausages in jars,, Diameter of the filling elements: approx. 20 mm,, power: up to 80 fillings / minute, Dimensions / weight: 2350 mm x 1250 mm x 2200 mm
Tilting frying pan 150L with stirrer, - Agitator with Teflon wiper, - Heating with thermal oil 240 C°, - Temperature query heating thermal oil PT 100, - Lid operation manually, - Cover seal profile seal, - Control: Aditec microprocessor controller, Electrical values, - Power: 26 KW Voltage: 400V Frequency: 50 HZ Phase: 3 N/PE TN-S
Filling and packaging plant for vinegar/oil in plastic bottles:, equipped for 0.75 ltr vinegar bottle,, Capacity: up to 4,000 bottles per hour, Consisting of:, 1. Bunker for empty plastic bottles, approx. 6 m long, capacity: approx. 400-600 containers, 2.Kamman bottle sorting system type K23F, The machine ensures that the bottles to be filled are conveyed out of the machine vertically, with the mouth facing upwards, Sorting capacity: approx. 3,000-6,000 pieces/h, 3. Conveyor belts, 4. Lightweight vacuum filler, make Cobert type Olimpia20/95, With 20 filling stations, Dimensions: LxWxH: 1,520x1,250x2,330 mm, Possible bottle diameters: 55-120 mm, Cost 117,000 DM in 1989, 6. Inkjet coder, make REA-JET, year of manufacture 2008, For applying the batch marking or MHD coding to the filled and sealed bottle, 5. Closer for plastic closures, make Zalkin type CA3/320NG, A closing station, Closures ...
suitable for liquids as well as viscous pastes,, pneumatic working method, Filling volume up to 500 ml easily adjustable,, Filling speed: 5-25 fillings per minute,, with filling funnel, approx. 30 l content.
The used Safeline Mettler Toledo metal detector is designed for use with wide-neck jars (500 and 1,000 ml) containing delicatessen products. This metal detector ensures the detection and removal of metal contamination in food products, thereby ensuring the highest quality standards are met. Thanks to its robust construction and proven technology, the metal detector offers excellent sensitivity and stability. It is easy to use and maintain, making it ideal for use in demanding production environments. This detector is particularly suitable for manufacturers who value product safety and integrity. With its efficiency and precision, the Safeline Mettler Toledo metal detector makes a significant contribution to increasing product safety and minimizing production downtime. This makes it a reliable investment for any company that places the highest demands on the quality assurance of its delic ...
In this case, the containers to be labelled are fed in by hand. The system was used for cylindrical jars with a low height. They are first given a base label from below, turned by 180° using a turning basket, and then given a security seal label from above. The labelled jars then run onto a storage table, offset by 90°.
Product: Mung bean seedlings, Entry temperature product: 10 – 15° C, Initial product temperature: 80 – 85° C, Perfomance: 1,000kg/hour, Determination: Blancheur is for the process of thermal treatment of vegetables, and fruit definitely, Working principle:, The product is fed in by the operator. The operator ensures an even, Distribution on the band. Blanching is done by spraying with warm water, Connection of the required belt speed. To maintain and improve the, To ensure the quality of the water, the circulating water is permanently cleaned using a stainless steel filter sieve., Technical specifications:, Total length: approx. 5,000 mm, Height: approximately 2,500 mm, Width: approx. 1,500 mm, Band width: 800 mm, Performance: up to 1 000 kg / h, Drive: 1.5 kW, Steam consumption: approx. 150 - 250 kg/t product, Blancheur consists of the following components:, · modular transportin ...
The rapid steam generator is installed in a 20 ́High Qube container including a Weißhaupt Monarch heating oil burner, economizer, stainless steel feed water tank, water treatment, blowdown vessel, chimney, etc, Power: 1,118 kW, Perm. Operating pressure: 12 bar, All documentation and test book are available., The return to service and the associated acceptance and repairs are the responsibility of the buyer; the container is sold without any guarantee or return claims; this is taken into account in the offer price.
Slitting device for Ferrum Entsteinmaschine, type EA,, equipped with 25 new circular knives,, suitable for plates with 50 holes, e.g. 34/20 (plums), With this device, the fruits, which are still divided during pitting, are cut on the underside by the scoring knives. As a result, the fruits are not injured when the stone is ejected.
pitting plate for cherries 21-12,, Original Ferrum plate,, 108 holes,, outer diameter: 21 mm,, inner diameter: 12 mm,, very good condition.
pitting plate for cherries 21-12,, Original Ferrum plate,, 50 holes,, outer diameter: 29 mm,, inner diameter: 20 mm,, very good condition.
41 pitting plates for plums 34-20,, Original Ferrum plates,, 50 holes,, outer diameter: 34 mm,, inner diameter: 20 mm,, very good condition.
Slitting device for Ferrum Entsteinmaschine, type EA,, equipped with 25 new circular knives,, suitable for plates with 50 holes, e.g. 34/20 (plums), With this device, the fruits, which are still divided during pitting, are cut on the underside by the scoring knives. As a result, the fruits are not injured when the stone is ejected.
De-stemming machine, make Engler, type Supra E 10, overhauled, for removing stems or stalks, e.g. for cherries, mirabelles, plums and various berries, peeling pearl onions, removing petals from gherkins,, Capacity: depending on the raw material up to approx. 1 t/h, power: up to approx. 1 tonne / h, Dimensions / weight: L x W x H: approx. 2.5 x 1.2 x 1.7, approx. 450 kg
Trade fair and exhibition machine, available immediately, Dynamic checkweigher to avoid underfilling and overfilling, reducing rejects and costs., IFS - fair production control,, Gross weighing range: 3,750 g, Running direction: L->R, Conveyor belt height: 985 - 1,085 mm (adjustment range), Throughput: approx. 200 pcs/min. depending on weight and packaging dimensions, Degree of protection: IP 65, Power supply: 230V 50Hz, Total length: approx. 1,660 mm, Infeed belt 1: side press belt 600 x 50 mm with central adjustment, Infeed conveyor 2: 300 x 150 mm, Weighing belt: 250 x 150 mm, Outfeed conveyor: 600 x 250 mm, knife-edge, Execution: 3, Emergency stop (electrical/, Pneumatics): 1, Wire identification: yes, 3 Color Light: Yes, Ethernet interface: yes, Line synchronization: yes, Sorting: High Speed Rejection Curve (towards the operator), Sorting table on site, load cell:, - part number 700 ...
Linear runner for applying sign or wrap-around labels (wet glue) to cylindrical containers., Perfomance:, approx. 25-100 labelings/min freely adjustable via frequency converter, Design type:, Left-hand machine (The overlapping direction of the wrap-around labels depends on this), gluing:, 210 mm brass glue roller with quick change device with one pitch, from 19 to 3 mm (horizontal stripe gluing over the entire length of the label), label magazine:, Up to 3,500 labels with a length of 80-380mm, Working height of the conveyor belt:, 1,000mm, adjustable +-50mm, Carrier:, 80.5mm chain, length approx. 3m/ with snail, glue supply:, pleumatic glue pump with heating, Paintwork:, light gray Ral 7042, unless stainless steel, Electrical equipment according to VDE regulation: 400 volts, 3 phases, 50 Hz, control voltage 24, Volts / PLC Siemens, Degree of protection: IP-54, Connection value: approx. 0 ...
Cup filler, make Schutten, year of manufacture 2005 with lifting and tilting device, - 2-lane rotary conveyor with matching lifting and tilting device for standard trolley 200 l, - Suitable for filling chunky masses (e.g. delicatessen salads), pasty products (e.g. mayonnaise, spreads), - Stations: unstacking cups, filling, sealing, ejecting, - Sealing foil from roll, sealing tool with integrated cutter, - Format set for butchers cups (112 x 86 cm), - Filling capacity: 15 – 35 cycles per minute (corresponds to 30 – 70 cups), power: approx. 19 bars / min (= 38 cups)
used for filling sliced and blanched mushrooms,, consisting of:, MURZAN - pump, type MUS-10, drip tape, LEONHARDT - filling machine, type AG1 DPE 150, year 1997, with a filling station, FURUKAWA, Old - Rivers - Pre-made Bag Packing Line, Ty FVV-8-275E, takes pre-made bags from a magazine, opens them, is filled via the Leonhardt,, a slight vacuum is drawn and the pouch sealed., Functionality:, The product is pumped with the Murzan pump from a storage tank onto a drip belt., The water is fed back into the tub via hoses because it is needed for pumping., The drip belt is designed in such a way that up to 4 employees can stand on the right and left, for example to be able to carry out sorting work., The product then falls into the funnel of the Leonhardt filler. Here there is another possibility to let the residual water run off before dosing., The product is conveyed forwards via the integr ...
Agitator tank, make Schwarte - Milfor, year 2015, unused, for oil and other liquids,, stands on load cells,, Content: 1,000 liters, Inside diameter: 1,000 mm,, cyl. height: 1,250 mm,, outlet height: 500 mm,, single-walled/uninsulated on the top floor,, double-walled / insulated on the cylindrical shell and underbody,, with pressure-resistant heating/cooling system, Jacket space: 30 liters,, Permissible operating temperature: up to max. 85°C.
Florin GmbH
