Type of machinery
(Quantity: > 9)
Manufacturer:
(Category: 818)
A repairable Océ/Canon large-format monochrome plotter requiring repair is available. Print resolution: 600dpi, max. print speed: 2.74m/min, max. print width: 914mm, max. paper size: A0, max. roll length: 152m, max. output length: approx. 15m, scan resolution: 400dpi. Machine dimensions X/Y/Z: approx. 1400mm/1050mm/1300mm, weight: approx. 200kg. The mechanical system is defective. Documentation available. An on-site inspection is possible.
A Systec/ESC 2-color flatbed screen printing system is available. Processes: unwind unit, printing unit 1, intermediate module, printing unit 2, rewind unit. Unwind unit: Systec, intermediate module: Systec, rewind unit: Systec, printing units 1/2: ESC. Max. print format: 300mm/450mm, vacuum table dimensions X/Y: 400mm/600mm, vacuum surface dimensions X/Y: 345mm/465mm, max. frame dimensions X/Y: 500mm/750mm, print material thickness range: 0mm-50mm, working height: 945mm, printing speed: 500mm/s, max. cycle rate: 800pcs/h, fine adjustment: +/-10mm, squeegee angle adjustment: +/-9°, unwind roll diameter: 600mm, unwind roll spindle diameter: 3in, vacuum boxes: 3. Machine dimensions X/Y/Z: approx. 7900mm/1400mm/1950mm. Documentation available. An on-site inspection is possible.
A semi-automatic ATMA flat-bed screen printing machine is offered. Max. print size X/Y: 400mm/600mm, vacuum table dimensions X/Y: 500mm/700mm, max. screen frame size: 700mm/950mm, min./max. screen frame profile height: 25mm/54mm, max. substrate thickness: 120mm, working height: 940mm, screen frame lift: 300mm, min./max. printing speed: 125mm/s/750mm/s, control: PLC. machine dimensions X/Y/Z: 1300mm/1060mm/1600mm, weight: 485kg. Documentation available. Inspection possible by appointment. The terminology flat-bed screen printing machine, vacuum table, screen frame lift and PLC follows established industry usage.
Two Gallus rotary screen printing units for the Arsoma EM 280 with peripheral equipment are available. Printing process: rotary screen printing, roller width, max. screen printing width: 270mm, side register adjustment range: +/-5mm, max. speed: 150m/min. Including various screen rings, welding unit, bonding fixture, mounting plate and trolley. Documentation available. An on-site inspection is possible.
Offered is a single-color pad printing machine by Printing International. Cliché size: 100mm/100mm, max. workpiece size: approx. 130mm/170mm, max. print image diameter: approx. 60mm, max. pad stroke: 100mm, max. output: 1200cycles/h. The machine is pneumatically operated with an open ink well system. Viewing by appointment is possible.
Reference ID PP-59633 Category Screen Printer Manufacturer - Model S-LINE Year Built 2022 Color - Impression - Working Hours - Speed - - Max. Size - Min. Size - Condition Good Location Europe Availability Immediately Machine Description Screen Printing Carousel for Textile Printing VERSATRONIC S-lim Number of stations / pallets: 8 Number of print heads: 6 Maximum printing area: 400 x 450 mm Pallet drive: frequency-controlled AC servo gear drive Squeegee Drive System High-precision AC servo drive 4-piston POWER squeegee system Main Control Rotary arm with control panel and 7" SMART touchscreen Microprocessor with diagnostic program Printing Programs 6 standard programs High opacity MULTIFLASH program Cooling stop Test print Start / stop Screen cleaning mode Pallet stop between print heads Free running mode Accessories 8 aluminium sandwich pallets 420 x ...
Offered is a repair-needing single-color pad printing machine Tampoprint. Doctor cup diameter: 90mm, max. print image diameter: 85mm, cliché size: 100×215mm, printing force: approx. 1100N, max. pad stroke above printed material: 110-150mm, pad stroke above cliché: 40mm, max. pad installation height: 92mm. Machine weight: approx. 120kg, dimensions X/Y/Z: 600mm/1000mm/900mm. The machine is mechanically in order, but only prints in continuous operation, and the dwell time function is no longer available. Inspection possible by arrangement.
A Flashforge 3D printer including the associated filament drying and storage unit is available. 1) Industrial FFF-3D printer Flashforge Creator 4A with HT extruder, build volume dimensions X/Y/Z: 400mm/350mm/500mm, layer height range: 0.05mm-0.4mm, printing accuracy: +/-0.2mm, max. printing speed: 200mm/s, max. extruder temperature HS/HT: 360°C/320°C, machine dimensions X/Y/Z: approx. 850mm/700mm/1000mm, weight: approx. 100kg, operating hours: approx. 5600h. 2) Mobile Flashforge filament drying and storage station, max. drying temperature: 120°C, drying chamber dimensions X/Y/Z: 500mm/375mm/200mm, machine dimensions X/Y/Z: approx. 840mm/675mm/600mm, weight: approx. 70kg. Including F extruder, HS extruder, 2x HT extruders and a tool set. The mainboard was replaced at approx. 4378 operating hours. Documentation available. An on-site inspection is possible.
Reference Num.: 4447Brand: HeidelbergType: KSB Cylinder 40 x 57 cmAvailable: directlyStatus: In productionLocation: Deutschland
A repair-required Summa tangential plotter is available. Media width range: 170mm-1620mm, max. cutting width: 1575mm, max. cutting speed: 800mm/s, material thickness range: 0.05mm-0.25mm, repeatability: +/-0.1mm. Machine dimensions X/Y/Z: approx. 2300mm/550mm/1100mm, weight: approx. 75kg. The cutting head of the machine has an unknown defect. An on-site inspection is possible.
AUTO STAMPING MACHINE UNFOLD BOX FEEDER SYSTEM AUTO STAMPING MACHINE WITH UPGRADE VERSION 2.0 SPECIFICATION : Model : B'Smart 1000 - 2.0 Paper : CARTON & INNER Carton Min. Sise : 371 x 350 x 6.6 (mm) Carton Max. Size : 902 x 890 x 11.3 (mm) Inner Min. Size : 310 x 120 x 10 (mm) Inner Max. Size : 430 x 180 x 10 (mm) Structure Dimention : 2870 x 1045 x 850 (mm) Structure Material : Mild Steel Powder Coat Machine color : Blue Conveyor Speed : 40Meter / Min ( Adjustable ) Feeding Direction : Horizontal Power : 1 Phase
A screen printing system is offered. This was extensively overhauled in 2016 and has rarely been used since then.
A two-color sheet-fed gravure printing press H.C. Moog is available. Paper weight range: 80g-400g/m², max. cardboard weight: 400g/m², max. printing dimensions X/Y: 720mm/1040mm, cylinder diameter: 300mm, max. production speed: 10000sheets/h, printing units: 2, drying stations: 4, gripper fields: 13, UV power: 3×160W, power consumption: 81kW. Includes Heidelberg high-performance stream feeder, Grafix intermediate dryer, intermediate dryer heater, air flotation dryer, UV drying unit, water cooling and cylinder transport trolley. Documentation available. An on-site inspection is possible.
Cutting length: 1700mm, squeegee rubber thickness: 5-10mm, coolant consumption: approx. 0.04l/m, connection voltage: 400V, 50Hz, 3 phases, connected load: 1kW, compressed air connection: 6bar, compressed air consumption: 2.5l/min, length: 2900mm, width: 784mm, height: 1250mm, weight: 430kg. An inspection on site is possible.
5 printing presses, - 1 enamel body, - 6 UV drying (air-cooled), - Rotary stamping press, - GAP Master, - BST video train surveillance, Fully rotary 355.6 mm, Maximum track width: 340 mm, Bagnbreite min.: 120 mm, Track width max.: 340 mm, Maximum track width: 340 mm, Bag width min.: 120 mm
A total of five identical ESC screen printing machines with different years of manufacture are available. Vacuum dimensions X/Y: 405mm/600mm, max. print dimensions X/Y: 400mm/600mm, vacuum table dimensions X/Y: 500mm/700mm, max. frame dimensions X/Y: 700mm/800mm, frame profile range: 25mm-54mm, max. substrate thickness: 300mm, max. cycle output: 800p/h, machine dimensions X/Y/Z: approx. 1250mm/950mm/1600mm, weight: approx. 500kg. Documentation available. An on-site inspection is possible.
Equipments:1 x feed table, 1 x tube chain conveyor, 1 x mixer1 x water addition, 1 x extruder, 1 x supply air fan,1 x cyclone, 1 x rotary valve, 1 x distributor,1 x belt dryer, 1 x product hopper, 1 x tube chain conveyor,1 x fine grain hopper, 1 x fine grain discharge, 1 x fine grain bag,1 x supply air fan, 1 x belt dryer, 1 x rotary valve,1 x dust bag, 1 x exhaust fan, 1 x airflow rotary dryer,1 x dedusting, 1 x tumbling screen, 1 x bar removal, 1 x final packaging1 x belt unit, type: BTK 1510-0refurbished 2016
Size: Equipments:Speed: 4,300 cycles per hourFold types: Letter, Single Fold, Zigzag Fold, DoubJob Memories: 20Folding Capacity: 8 SheetsDocument Feeder Capacity: 325 SheetsMaxi Feeder: 1,200 SheetsEnvelope Capacity Hopper: 500 EnvelopesEnvelope Capacity Side Exit: 500 EnvelopesEnvelope Capacity Power Stacker: 500 EnvelopesSet Thickness: 2.5mmReverse Reading: YesCascade Feeding from all Feeders: YesHigh Capacity Power Stacker: YesDimensions: Depth: 460mm, Height: 920mm, Length: 1Dimensions: Weight: 140 Kg (6 Stations)
A textile screen printing machine Hebbecker including intermediate dryer and drying tunnel for the complete process is available. 1) Textile carousel screen printing machine Hebbecker S-Line-5-8-4040, year of manufacture: 2017, printing units: 5, stations: 8, max. print dimensions X/Y: 400mm/400mm, plate adjustment: +/-80mm, squeegee length: 410mm, machine diameter: approx. 2900mm, machine height: approx. 1900mm. 2) Infrared conveyor dryer M&R Economax D, year of manufacture: 2017, belt width: 610mm, heating chamber length: 1140mm, cooling system: CoolSkin. 3) Intermediate dryer Hebbecker Magic 25, year of manufacture: 2017. Documentation available. An on-site inspection is possible.
A continuous-flow washout machine Glunz & Jensen for washing out and simultaneous gumming of chemistry-free offset printing plates is available. Brushes: 2, max. working width: 851mm, min. plate width: 231mm, min. plate length: 300mm, max. plate length: 1100mm, plate thickness range: 0.15mm-0.3mm. Machine dimensions X/Y/Z: approx. 1400mm/700mm/1100mm, weight: approx. 130kg. The machine has been cleaned, dismantled and is stored in a dry warehouse. Documentation available. An on-site inspection is possible.
Four identical screen printing machines ESC are available. Rigid material thickness: 200mm, max. print format X/Y: 400mm/600mm, vacuum plate dimensions X/Y: 500mm/700mm, vacuum area dimensions X/Y: 405mm/600mm, max. frame dimensions X/Y: 600mm/940mm, frame profile range: 25mm-47mm, max. print material thickness: 200mm, working height: 960mm, frame lift: 270mm, printing speed range: 125mm-750mm/s, max. cycle rate: 600p/h, fine adjustment: +/-10mm, squeegee angle adjustment: +/-9°, working pressure range: 5bar-7bar. Machine dimensions X/Y/Z: approx. 1300mm/1100mm/1600mm, weight: approx. 500kg. Documentation available. An on-site inspection is possible. Individual sale possible.
A compact screen printing machine Thieme is available. Print dimensions X/Y: 750mm/1050mm, max. screen frame dimensions X/Y: 1200mm/1400mm, max. print material height: 40mm, squeegee speed: 75m/min, printing speed: 950cycles/h, machine dimensions X/Y/Z: approx. 1800mm/1700mm/1350mm, weight: approx. 700kg. An on-site inspection is possible.
Size: 360 x 360 mmEquipments:mobile envelope feederformat from 100 x 100 mm to 360 x 360 mmspeed 15000 per/hourssenor controlled for automatic speed adjustmend
Print roller, printer roller, spindle, anvil roller, pressure roller-Print roller: unfortunately no type designation-Technical dimensions: see photos-Dimensions: 295/100/H100 mm-Weight: 5.7 kg
A manual screen printing machine Eickmeyer is available. Material thickness range: 2mm-25mm, max. printing dimensions X/Y: 1700mm/700mm, machine dimensions X/Y/Z: approx. 2650mm/2100mm/1500mm. An on-site inspection is possible.
A manually operated machine for effortless mitres matrix. The machine has a metric measuring scale for easy measurment of pieces to be cut. Light weight durable construction can easily be moved from one workbench to another.
4 Ink Pumps Complete Technotrans TB 200-15/9 Ink Pump Year 2007 Capacity 200kg bins Air Pressure: 8bar
