veneer machines used for sale

- Gold anodized heating plates 2.5 x 1.1 m - Safety ripcord Hints: According to the owner, the heating plates were recently replaced, but there is oil loss on 2 cylinders The sale is made on behalf of the owner from the current location

Plate dimensions: 3.000 x 1.250 mmDaylight opening: 400 mmNumber of daylights: 1 St.Heating: elektrisch Specific pressure: 3,1 kg/cm²Total pressure: 115 toMotor output: 2,2 kWweight of the machine ca.: ca. 5 kgsafety device: Notausleine The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Continuous press Manufacturer: Wemhöner Model: VSF Year of construction: 1972 Panel dimensions: 3600 x 2200mm Heating medium: Oil Feeding Destacking Total length approx.: 12.000mm

Working width: 800mm, nominal current: 2A.

Joining saw and fine-cutting saw with joining unit and veneer stop table A video of the running machine can be sent on request. For tear-free and joint-tight cutting of veneer, including heavy-cut veneer Cutting length max. 3100mm The sawing unit and joining unit are combined in one unit, so that only one unit has to be moved. Easy-to-guide sawing unit, runs on ground and hardened shafts. The function of the joining blade with two diamond cutting edges is comparable to that of a planing head. Rear side table with penetrating finger stop, adjustable from 2 - 50cm, with pneumatic clamping and digital display Pneumatic workpiece clamping Fuernier pad made of low-wear hard plastic Drive motor 2.2kW HM-tipped fine-cut blade Joining sheet PCD-tipped Practical front veneer support Angle stop left Suction connection 80mm with adapter to 100mm Emergency stop switch CE mark O ...

Cutting length: 2330mm, insertion height: 80mm, length: 3410mm, width: 1650mm, height: 1570mm, weight: 2.4t.

AUTOMATIC HYDRAULIC GUILLOTINE type MONGUZZI TRA 2600 Second hand machine Volt. 380/50 Working conditions : good Technical details : max. useful cutting length mm. 2650 max. useful cutting heigth mm. 100 max. useful cutting width mm. 1000 min. useful cutting width mm. 40 hydraulic motor power Hp 5,5 net weigth kgs. 2600 CE mark : NO

Panel length: 3200mm, panel width: 1000mm, max. workpiece thickness: 38mm, min. infeed length: 500mm.

with heating plates, 3 levels, each approx. 2,500x1,300 mm

HOT PRESS MODEL PL 90s 3000x1300 mm PS VBO TECHNICAL CHARACTERISTICS Platens dimensions 3000x1300 mm Stroke 400 mm Type of stroke Upstroke design (from bottom to top) Type of platen Assembled platens with coil and aluminum covering Total thrust 90 ton on 80% of the surface Pressing Cylinders N° 6 cylinders ø70 mm Specific Pressure 2.05 kg/cm2 on 100% of the surface 2.56 kg/cm2 on 80% of the surface Loading and Unloading Side3000 mm side Type of Heating system Oil boiler ? maximum temperature = 120°C Heating system specificationsElectric boiler 18 kW Opening Automatic by timer Control Board Standard Power supply 400V, 50Hz, 3ph Security device  ...

Roller dryer Babcock Veneer dryer type: RD III 460 / 6 m - K.1 s "1" year of manufacture: 1991 Working width 4600 mm Heated length 6000 mm 1 m cooling field 3 floors each field is 2 m long Fans 2-stage 3.5 kW/ 12 kW Steam power 800 kW Feed speed infinitely variable 0 – 28 m/min.

Veneer jointing guillotine, hydraulic Brand: Casati Type: TO/CC 3600 New machine Technical data: Cutting length: 3.600 mm Daylight opening of the clamping beam: 100 mm Max. rear feed width 800 mm Min. rear feed width 25 mm Hydraulic unit motor power 10 PS Rear feed motor power 0,5 PS Equipped with: - Motordriven feed of the back fence - Cutting edge light - Millimeter counter - Manual and automatic working cycle. The operator can choose between: manual working cycle (separated controls for each phase of the working cycle) or automatic working cycle (one only push-button control for the whole cycle) - hydraulic control valve of speed and pressure of knife beam and clamping beam - central system of lubrication - knife made with special steel - angular fence - Photocells and guards as per EC rules Options for an extra charge - Photo cells and guards ...

Veneer scissors Hymmenia Type: AS 2600 Cutting length 2600 mm Two-hand gearbox Insertion height 80 mm Maximum cutting width at rip fence 800 mm Minimum cutting width approx. 20 mm Motors 4/6 and 2.2 kW Weight approx. 2,600 kg Dimensions 3500 mm x 1900 mm x H 1750 mm

Basic machine complete with: - with automatic feed - circular saw unit 2,2 kW (3 hp) with pneumatic height adjustment - Axial mechanical adjustment of the saw, adjustment field stepless from 0 to 2 mm - high-precision double ball bearing slides for the moving parts - pressure beam controlled by two lateral pneumatic cylinders, equipped with torsion bar - plastic cable chain - connecting piece Ø 120 mm - HM- saw blade Ø 180 mm - Lubrication unit with filter complete with gearbox and pressure gauge on the air line - service tools - safety devices type: FILA 31 Usable cutting length 3.100 mm type: FILA 37 Usable cutting length 3.700mm type: FILA 43 Usable cutting length 4.300mm

Veneer peeling plant RFR – Keller - Centering basement GZB - Peeling machine RFR Type 9 PA 23 max. clamping length 2300 mm Clamping diameter up to max. 1000 mm, peels down to 95 mm Right telescopic spindle new in 1986/1987 for 100,000 DM including waste gutter with extra intermediate trestles for shorter parts 55 kW DC motor infinitely variable Powered by diesel generator 69 kW Consumes less than 200 ltr./week at 8 hours a day/ 5 days a week - Automatic rewinding with magazine from cellar to width 1350 mm - Automatic processing cellar - Scanner length 2400 mm - Veneer clipper Keller working length 2400 mm - Self-made stacking Dimensions of the entire line: 26 m long x 4 m wide

Splicing machine with glue thread Make: Casati Type: Z 1000 New machine Technical details: Arm length: 1.000 mm Veneer thickness: 0,4 - 1,5 mm Feed speed: 8 - 18 m/min. Overall dimensions: 1.350 x 500 x 1.300 mm Equipped with: - Key pad of the electronic control device for the heating temperature setting - Electronic digital read-out for an accurate monitoring of the heating temperature - Handwheel of the motor speed control for the stepless adjustment of feed speed - Knob of the motor speed electronic control for the stepless adjustment of oscillation angular speed of the heating arm independent of the linear feeding speed (zig-zag pitch) - Glue thread heater by electric resistance - Electronic adjustment of the heating temperature of the thread with accuracy ± 1°C - Electronic unit with stored control program - Separating fence with pressure wing - Holder of t ...

Veneer peeling line RFR Clamping length max. 2300 mm with manual winding and unwinding with scanner with veneer clipper cellar with MAN diesel engine approx. 130 hp

Splicing machine with glue thread Make: Casati Type: Z 2000 technical details: arm length: 1.200 mm veneer thickness: 0,4 - 2 mm feed speed: approx. 5 - 40 m/min. noise measurement: 73,5 dB compressed air consumption: 0,05 l/min working pressure: 6-8 bar overall dimensions: 2.050 x 600 x 1.400 mm This model is specially designed for the users requiring high production and considerable working speed also when using difficult materials. - stepless change of heater oscillation angular speed, independent of the linear feeding speed - accurate adjustment of the feeding friction pressure - adjustment of the starting point and stop point - thread heating by electric resistance - amperometer on the control panel for an accurate adjustment of the heating temperature - zig-zag height adjustment - automatic breaking of the thread - all functions are operated on the con ...

veneer assembler Modsell FW/M 630 year 95

Manufacturer: Josting , Type: EFS, Year: 1968, Control: hand, Longitudinal cutting guillotine: yes, Pressbalkenöffung mm: 60, Cutting lenght mm: 2800, Schnittbreite min-max mm: 500, Working hight mm: 30, Alignment light: yes, Digital readout lineal guide: yes, Motor-driven kinfe beam: yes, Motorized stop adjustment mm: yes, Knife drive: Elektro, Year :1968

Veneer assembly machine model FW 1100,

Manufacturer: Friz , Type: Profi PWP 120/42, Year: 2006, Control: yes, Suitable for veneer and paper: 2D Folie, Film width mm: 450, Gluing system Pu: PUR, Feeding speed min-max m/min: 6 - 40, Feeding speed continous adjustable: yes, roller diameter mm: 152, Work piece width min-max mm: 10 - 450, Min.-max. workpiece length in mm: min 2500, Min.-max. workpiece height in mm: 6 - 150, Overhauled on: 35 Betriebsstunden, Year :2006

Veneer assembly machine model FWL 1200, Joining, gluing, thread and white gluing

Manufacturer: Bürkle, Type: EFA 800, Year: 1984, Working width mm: 600, Veneer thickness min mm: 0,15, Veneer thickness max. min: 0,7, Feeding speed max m/min: 8 - 35, Feeding speed continous adjustable: yes, Year :1984

Proven veneer assembling machine, veneer sewing machine from Kuper FWJ920 Veneer thickness approx. 0.3 - 2mm Feed speed approx. 15 m/min Projection 920mm Power connection 380V / 0.45kW Automatic start via contact brush, interruption via foot pedal 1 spool of glue thread Threader Release Operating instructions The machine is set. You can get started right away. Original paint, only a few paint spots touched. Pressure reducer and V-belt renewed New jetty New nozzle tip and thread guide Rubberized ejection roller new Dimensions approx. 1350 x 500 x 1750mm (LxWxH). Weight approx. 185kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "other offers of this supplier".

Manufacturer: Jsting , Type: PFS 1800, Year: 1964, Longitudinal cutting guillotine: yes, Pressbalkenöffung mm: ca.80, Cutting lenght mm: 1800, Schnittbreite min-max mm: 850, Working hight mm: ca.40, Alignment light: yes, Digital readout lineal guide: yes, Motor-driven kinfe beam: yes, Motorized stop adjustment mm: yes, Year :1964

Veneer gluer Kuper FWD 900 Machine is FUNCTIONAL and ready for demonstration from PENSION/Handicraft business From the carpentry site, as seen NET € 800.00

Manufacturer: Scheer Funiersäge, Cutting lenght mm: 2800, Working hight mm: ca.30, Main engine kW: ca.1,5, Pressure beam: yes,

Crimping area 3.6 x 1.35 m, electrically heated, 23 KW, n= 1400

Manufacturer: Langzauner, Type: FPS Hydromatik, Control: yes, Longitudinal cutting guillotine: yes, Cutting lenght mm: 3100, Schnittbreite min-max mm: 600, Working hight mm: 50, Required space L x W x H mm: 3900x1170x1500, Wight approx. kg: 3200,