Manufacturer:
The distance indication is not possible, because your location could not be determined. Prerequisite is that your browser allows cookies and location determination.

Manufacturer:
(Category: 107-654)

AMG 1
sheet metal working / Plasma Cutting Machines
date: 22.05.2024 add to watchlist
approved
dealer
item-No.: 157985462
New in: 2013

used

check Seller: MASZYNERIA SP. Z O.O.
Location: Land-pl
Price: 30.715 € add to watchlist

AMG S820 plasma-gas cutting machine built by the Taiwanese company ASIA MACHINE GROUP in 2013, is used for precision cutting of workpieces made of carbon steel and acid-resistant steel. The machine characterised by a robust and high-quality construction has two torches – a HYPERTHERM plasma torch with THC voltage height adjustment and collision protection, and a KOIKE gas torch with functions for automatic piercing. The plasma cutting machine performs workpiece cutting processes on a large work table of surface area (L x W) 6100 x 2500 mm with an additional laser pointer to facilitate workpiece positioning on the table. In order to eliminate any contamination generated during laser and gas cutting, the usual exhaust extraction has been replaced by an waterbed table powered by water with a pressure of up to 2 bar. The water mirror in the table’s bath effectively absorbs the exhaust ...

sheet metal working / Plasma Cutting Machines
date: 22.05.2024 add to watchlist
approved
dealer
item-No.: 162329841
New in: 2023

new

check Seller: AMARON s.r.o.
Location: 60200 Brno Land-cz

add to watchlist

Inv. Num. : 6794 Type: 3015 Producer: BODOR Created: 2023 Parameters: Laser power: 12 kW Working table length: 3000 mm Working table width: 1500 mm Machine weight: 9000 kg

sheet metal working / Plasma Cutting Machines
date: 22.05.2024 add to watchlist
approved
dealer
item-No.: 164041685
New in: 1996

used

check Seller: Plum & Partner Werkzeugmaschinen GmbH
Location: Bünde bei Bielefeld

add to watchlist

cutting range for steel to: 12 mmcapacity at 100%: 8,5 KVAcutting medium: - air pressure - required: 6 barconnected load: max. 10 kWweight of the machine ca.: 64 kgdimensions of the machine ca.: 515 x 60 x 800 mmCE signed: Electric 380 Volt: Plasma cutter only used ONCE! Since the user wanted to cut foiled sheets and the foil was not separated cleanly due to the heat, the device was never used again. The system is air-cooled, mobile, and has a ground cable and plasma nozzle.Machine dealer with own stock of 1600 m².The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet metal working / Plasma Cutting Machines
date: 27.02.2024 add to watchlist
item-No.: 143246055
New in: 2007

used

Seller: Felderer AG
Location: Land-de
Price: VB 19.000 € add to watchlist

Plasma cutting machine used, little used, in very good condition. Ideal for the production of angular or round air ducts. Max sheet size: 3000x1500mm Facilities: â?¢ Sectional suction â?¢ Autom. Label â?¢ Production program "ViaDuct" (air duct production) on a separate PC â?¢ Network connection â?¢ Power source:ThermalDynamicsCutmaster A40 Suction filter available in separate display.

sheet metal working / Plasma Cutting Machines
date: 26.02.2024 add to watchlist
approved
dealer
item-No.: 161098526

used

check Seller: Sidermac machine tools srl
Location: 31046 Oderzo Land-it

add to watchlist

Plasma Cutting/Oxyfuel ESAB Numorex for sale Technical data: - Plasma source: 240/360 A - Bevel plasma torch for chamfer cutting - Vibrating suction bench for evacuating pieces - Smoke extraction system.

sheet metal working / Plasma Cutting Machines
date: 11.04.2024 add to watchlist
approved
dealer
item-No.: 163786615

used

check Seller: STOCKEUROSTOCK SRL
Location: 44100 Ferrara Land-it

add to watchlist

Plasma Flour Useful Size 6000 x 2500 Hypertherm HPR 130 Plasma Source Cutting steel from 1.5 mm to 30 mm Stainless steel cutting from 1.5 mm to 20 mm Complete cartridge fume extractor system Visible machine in operation.

sheet metal working / Plasma Cutting Machines
date: 26.02.2024 add to watchlist
approved
dealer
item-No.: 161098525

used

check Seller: Sidermac machine tools srl
Location: 31046 Oderzo Land-it

add to watchlist

Used FICEP A31 plasma cutting/oxyfuel: Features: - Drilling and punch marking center; - Smoke extraction system.

sheet metal working / Plasma Cutting Machines
date: 10.11.2023 add to watchlist
approved
dealer
item-No.: 162779993
New in: 2016

used

check Seller: Ruppert Werkzeugmaschinen GmbH & Co.KG
Location: Land-de

add to watchlist

Hezinger HAP2E Combi Plasma Cutting System, Year of construction 2016, Control ECK 872, Travel 1500 x 3000 mm, Harris oxy-fuel torch and Smart Focus 200 plasma source, Auto. gas control, Cutting current up to 200 A, Marking ron up to 50 A, Burner holder with 3 nozzles, Height control, DXF capable, 3100 on-duty hours, 323 hours of work,

sheet metal working / Plasma Cutting Machines
date: 13.05.2024 add to watchlist
item-No.: 162696790
New in: 2012

used

Seller: Czech auction s.r.o.
Location: Land-cz

add to watchlist

Hypertherm HPR260XD Torch Plasma Source Manufacturer: Hypertherm Type: HPR 260 XD Year of construction: 2012 Power: 260 A Precise cutting of mild steel from 0.5 mm to 64 mm, stainless steel and aluminum from 0.5 mm to 50 mm. Technical Specifications Cutting Capacity for Structural Steel Burrless: 32 mm Production die-cutter: 38 mm Maximum cutting capacity: 64 mm Cutting capacity for stainless steel Production die-cutter: 32 mm Maximum cutting capacity: 50 mm Cutting capacity for aluminium Production opening: 25 mm Maximum cutting capacity: 50 mm

sheet metal working / Plasma Cutting Machines
date: 22.04.2024 add to watchlist
item-No.: 163878367
New in: 2005

used

Seller: RST CONNECT UG
Location: Land-de

add to watchlist

Plasma cutting machine MESSER Metalmaster Year of manufacture: 2005/2018(Retrofit) Cutting area: 1,500 x 6,000 mm Plasma Power Source: Hypertherm HPR 130 Accessories: extra slag trays

sheet metal working / Plasma Cutting Machines
date: 11.03.2024 add to watchlist
approved
dealer
item-No.: 162937624
New in: 2005

used

check Seller: tuerer machinery brokers & consulting
Location: Land-de

add to watchlist

Ref. No. 00787 Description Plasma Cutting System with Tube Axis Manufacturer: Microstep Type HS-P 4001.20+S500 Year of construction 2005 Operating hours Only run in one shift on 3-4 days Machining area 4000mm x 2000mm Cutting pipes up to diameter 300mm and 4000mm length Plasma cutting up to 30mm thickness with 160A, tube and flat SP: 230V 50Hz Power: 2kW Condition Good condition Submission mid-April 2023

sheet metal working / Plasma Cutting Machines
date: 22.05.2024 add to watchlist
approved
dealer
item-No.: 163534401
New in: 2007

used

check Seller: AMARON s.r.o.
Location: 60200 Brno Land-cz

add to watchlist

Inv. Num. : 6599 Type: MG 12001 25PrP Producer: Microstep Created: 2007 Parameters: Plasma source: 2x Fine Focus 800 (300 A) Portal width: 2500 mm Equipment: 3 burners Cable Automatic controller Cooling unit Incidentals

sheet metal working / Plasma Cutting Machines
date: 18.04.2024 add to watchlist
item-No.: 163845971
New in: 2010

used

Seller: RST CONNECT UG
Location: Land-de

add to watchlist

Plasma Cutting Machine MicroStep MG-PrB 6001.20 + S1200 – Retrofit with drilling rig and pipe cutting system Year of construction: 2010 – Retrofit 2021 Working area: 6,000 x 3,200 mm, including 1,200 mm pipe shaft 1x pipe cutting device: 100 – 700 mm 1x Plasma Rotator Plasma Power Source: Hypertherm HPR 260XD 1x fully automatic drilling spindle: up to 30 mm drilling and up to M20 threading (8-fold tool changer) Filter system: Donaldson DFPRO 8

sheet metal working / Plasma Cutting Machines
date: 22.05.2024 add to watchlist
approved
dealer
item-No.: 162336412
New in: 2018

used

check Seller: AMARON s.r.o.
Location: Land-cz

add to watchlist

Inv. Num. : 6924 Type: Roto Mini 1100 Producer: Nessap Created: 2018 Parameters: Max. working length: 1100 mm Working diameter: 500 mm Power: 80 A Maximum cutting thickness: 8 mm Equipment: Anti-collision system Extraction of the flue gas inside the cut pipe Cover of the X-axis with protective bellows Extendable ashtray A few clues

sheet metal working / Plasma Cutting Machines
date: 28.01.2024 add to watchlist
approved
dealer
item-No.: 163233282
New in: 2005

used

check Seller: LRTT GmbH
Location: 09600 Weißenborn Land-de
Price: 15.800 € add to watchlist

For sale is: 1 Piece Used Plasma Flame Cutting Machine Manufacturer: Oxy2000 Mai Year: 2005 Weight: 5.000Kg Table: 2,000 x 3,000mm Power Source: Hypertherm plasma cutting system Max. cutting capacity Structural steel: 38mm stainless steel: 25 Aluminum: 25mm If required, we also have a Kemper extraction system on offer. However, this is not part of the offer. Machine can be viewed in our warehouse in 09599 Freiberg.

sheet metal working / Plasma Cutting Machines
date: 13.05.2024 add to watchlist
item-No.: 162681978
New in: 2014

used

Seller: Czech auction s.r.o.
Location: Land-cz

add to watchlist

Very powerful CNC plasma cutting machine Pierce a.s., Czech Republic Manufacturer: Pierce Control Automation a.s. Model: RUM 3000P HD Year of construction: 2014 Condition of the machine: very good Technical Specifications Work table length: 12,000 mm (can be shortened if required) Work table width: 2,500 mm Total cutting capacity: 200 kW Portal width: 3,000 mm Table size: 2000 x 2500 x 630 mm (6 pieces) Max. cutting range: Burrless: 0–32 mm Production die-cutter: 38 mm Maximum cutting capacity: 64 mm Accessories: Documentation Lantek Programming Software Plasma Source: Hypertherm HPR 260HD Internal suction filtration 5500m2/h - NEW unused The machine has undergone a full inspection and maintenance, including testing, by the manufacturer Pierce. We have logs available! Service and spare parts are hassle-free, Czech manufacturer! The machine is no ...

sheet metal working / Plasma Cutting Machines
date: 22.05.2024 add to watchlist
approved
dealer
item-No.: 163534400
New in: 2004

used

check Seller: AMARON s.r.o.
Location: 60200 Brno Land-cz

add to watchlist

Inv. Num. : 6144 Type: Scorpion 2000 Producer: Pierce Created: 2004 Parameters: Work table length: 3000 mm Work table width: 1500 mm Minimum sheet thickness: 2 mm Maximum sheet thickness when cutting: 15 mm Equipment: Source: Hypertherm 1650 Vacuum New Burner PC board replacement. According to GO.

sheet metal working / Plasma Cutting Machines
date: 22.05.2024 add to watchlist
approved
dealer
item-No.: 136114582
New in: 2004

used

check Seller: AMARON s.r.o.
Location: Land-cz

add to watchlist

Produced: 2004 Parameters: Table: 2x3m Max head count: 4 Gauge: 2500 mm Cutting width -1 burner: 2100 mm Cutting width -2 burners: 1970 mm Cutting width -3 burners: 1840 mm Cutting width -4 burners: 1710 mm min. Parallel cut: 90 mm Cutting speed: 50-6000 mm/min. Cuttous (standard): do 200 mm Machine width: 3150 mm Machine length: 1320 mm Machine height: 1700 mm Cutting table height: 600 mm Connection voltage: 230V/50Hz

sheet metal working / Plasma Cutting Machines
date: 22.05.2024 add to watchlist
approved
dealer
item-No.: 157718037
New in: 2013

used

check Seller: MASZYNERIA SP. Z O.O.
Location: Land-pl
Price: 29.765 € add to watchlist

The STIGAL DYNAMIC SPEED HQ 1500X3000 plasma cutter was manufactured in 2013 by the Polish company Stigal. A computer-controlled thermal cutter is designed for cutting out shapes from a sheet of metal. It is equipped with, among others in: CNC G-CODE control, CAD / CAM WRYKRYS software, CEBORA PROF 165 HQC aggregate, or a cover protecting the operator's eyesight. The cutter's cutting width is 1500 mm, length is 3000 mm and the thickness is 20 mm. The machine's torch moves at a speed of 330 mm / s and cuts metal sheets with a maximum thickness of 20 mm. The total weight of the machine is 3 tons. Technical data of the STIGAL DYNAMIC SPEED HQ 1500X3000 cutter - cutting length: 3000 mm - cutting width: 1500 mm - maximum material thickness: 20 mm - maximum cutting thickness: 20 mm - permissible table load: 150 kg / m2 - maximum travel speed: 90 m / min - type of burner height adju ...

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
Banner ad information