used Worm gear and screws for sale

Twin-shaft pre-press screw Type: DDA:VP-370:A270 Trough: approx. 3,000 x 660 mm, screw diameter approx. 370 mm Drive via geared motor

Meyer dosing screw with built-up suction filter in stainless steel, incl. side channel blower

Recycling machine trade AGICOM- Pedergnana OG: Screw conveyor demonstration device - for the transport of granules. Construction: Metal construction with drive and transmission gear. The discharge height can be adjusted by adjusting the legs. electric motor 1.1 kW; Length 2.5 m

Cooling screw trough screw double-walled heated or coolable used Manufacturer: BARL Maschinenbau GmbH Type: KT0803F17T50 Built: 2015 Total dimensions of the trough screw approx. 9.5 x 1.3 x 1.6 m Trough length approx. 8000 mm Trough width outside approx. 450 mm Trough depth approx. 600 mm Conveyor length approx. 7000 mm partly double-walled and can be heated or cooled with water Steel screw with cooled shaft Spiral thickness approx. 8 mm Diameter approx. 400 mm Spiral height approx. 100 mm Slope approx. 160 mm Shaft approx. 200 mm geared motor 1.5 kW 6.8 rpm 220/380 V substructure Steel construction approx. 11 x 2.5 x 0.2 m Total dimensions: approx. 11 x 2.5 x 2 m Subject to changes and errors in the technical data, dates and prices as well as intermediate sale.

Pipe screw conveyor screw used inclined conveyors Changes can be made by our own special machine construction according to your wishes. Pipe diameter approx. 380 mm Pipe length approx. 6000 mm Inlet/outlet-diameter approx. 350 mm Screw and tube made of stainless steel Gearmotor Sew 1.1kW 10 rpm 380 V Total dimensions approx. 8000 x 600 x 1300 mm

Length approx. 4.5 m Diameter approx. 200 mm 2.2 kW drive

1 x NEZTSCH NE80 1 x NETZSCH NU50B, 1 x PCM 100/10 1 x Manufacturer unknown

Comm.: 63006828 Y.O.m.: 2012 Capacity: 8m3/h at 372 rpm 1.2m3/h at 63 rpm LWH: 1500 x 200 x 300 mm Weight: approx. 80 kg on request with spare parts (rotor, stator, etc.)

No.: 469543 Comm.: 63008879 Y.O.m.: 2014 Capacity: 3m3/h at 145 rpm 3.5m3/h at 177 rpm Pressure: 6 bar, Temp. 95°C LWH: 1500 x 200 x 300 mm Weight: approx. 80 kg on request with spare parts (rotor, stator, etc.)

No.: 469544 Comm.: 63008879 Y.O.m.: 2014 Capacity: 3m3/h at 145 rpm 3.5m3/h at 177 rpm Pressure: 6 bar, Temp. 95°C LWH: 1500 x 200 x 300 mm Weight: approx. 80 kg on request with spare parts (rotor, stator, etc.)

Machine: eccentric screw pump Manufacturer: Netzsch Type: 3 NE 08 Machine number: 253173 Year of construction: 1994 Capacity: approx. 300 l / h Engine: Dietz Drezhal: 1390 RPM KW: 0.55 Voltage: 400V Connection suction side: 3/4 inch Connection pressure side: 3/4 inch Length: 800 mm

Attachment: eccentric screw pump Manufacturer: Netzsch Type: NE 69 A Machine number: 253233 Year of construction: 1994 Capacity: 25m 3/h Engine: Dietz KW: 5.5 Voltage: 400V Connection suction side: DN 100 Port side: DN 100 Length: 2300 mm

Attachment: eccentric screw pump Manufacturer: Netzsch Type: NE 30B Machine number: 235197 Year of construction: 1992 Power: 0.2-1.4 m3/h Pressure: 0-6 BAR Motor: Stöber 1.1 kW, 400 V Inlet connection: DN 50 Port side: DN 50 Length: 1500 mm Miscellaneous: electrical Verstellgetrieb with ventilation Condition: used, ready

Attachment: eccentric screw pump Manufacturer: Netzsch Type: NM031BY Machine number: 321637 Year of construction: 2001 Power: 90-1500 l / h Speed: 24-400 rpm. Pressure: 0-16 BAR Motor: 1,5 kW, 400 V North, Connection suction side: DN 70 Port side: DN 70 Length: 1700 mm Condition: used, ready

Attachment: eccentric screw pump Manufacturer: Seepex Type: BN 1-12 Machine number: 176411 Year of construction: 2005 Capacity: 150-2200 l / h Pressure: 2 bar Speed: 1400 RPM Inlet connection: DN 50 Port side: DN 50 Length: 1200 mm Condition: used, ready

Attachment: eccentric screw pump Manufacturer: Netzsch Type: NM031BY02512B Machine number: 409232 Year of manufacture: 2009 Output: 200-300-350 l / h Pressure: 4-6-8 bar Motor: Lenze Speed: 1410 RPM. Inlet connection: DN 50 Port side: DN 50 Length: 1200 mm Condition: used, ready for operation (new stator)

Attachment: eccentric screw pump Manufacturer: Allweiler Type: SLBP 720-1 Machine number: 7640010 Year of construction: 1989 Power: 67-484 l / min Speed gear: 50-280 RPM. Engine: Bauknecht Power: 5.5 kW, 380 V Speed: 1440 RPM Connection suction side: DN 100 Port side: DN 100 Length: 1800 mm Condition: used, ready

Attachment: eccentric screw pump Manufacturer: Netzsch Type: 2 NE 60A Machine number: 221234 Year of construction: 1990 Power: 47 m3/h Pressure: 4-8 bar Speed: 1450 RPM. Engine: North Power: 15 kW, 400 V Connection suction side: DN 100 Port side: DN 100 Length: approx. 2800 mm Other: with an electric variable speed gears Condition: used, ready

Attachment: eccentric screw pump Manufacturer: Netsch Type: A 60B Machine number: 263381 Year of construction: 1995 Performance: 19 m3/h at 2 bar Pressure: 1--8 bar Motor: 4 KW, 400V, speed 1445 RPM Connection suction side: DN 100 Port side: DN 100 Length: approx. 2000 mm Condition: used, ready

Attachment: eccentric screw pump Manufacturer: Netsch Type: NE 20 B Machine number: 263384 Year of construction: 1995 Power: 1,3 m3/h Pressure: 12 bar Engine: HEW, 0.37 KW, 400 V, 1380 RPM Connection suction side: DN 40 Port side: DN 40 Length: 1200 mm Condition: used, ready for operation, with variable speed gears

Attachment: eccentric screw pump Manufacturer: Seepex Type: BN 35-12 Machine number: 176490 Year of construction: 2005 Power: 2-40 m3/h Pressure: 1--8 bar Speed: 1450 RPM. Connection suction side: DN 150 Port side: DN 125 Length: 2400 mm Condition: used, ready

Attachment: eccentric screw pump Manufacturer: Seepex Type: BN 15-6LT Commission no.: 96373 Year of construction: 1997 Flow rate: 14 m ³/h Pressure in the pressure port: 2.00 bar Speed: 344 rpm Motor: kW 2.24 Inlet: DN 80 PN 16 DIN 2533 Pressure connection: DN 65 PN 16 DIN 2533 Material: Main body GG25 Shaft: 1.4021 Stator: NBR Buna Rotor: 1.2436

Attachment: eccentric screw pump Manufacturer: Allweiler Type: AE1E 550/10 / 11 Dr Machine number: 7218305 Year of construction: 1993 Performance: Q 70 / 417 l/min, n 60/330 1/min Engine: 5.5 KW katt Voltage: 380 V Connection suction side: DN 100 Port side: DN 100 Length: 1900 mm Condition: used, ready

Attachment: eccentric screw pump Manufacturer: Allweiler Type: BN 2-24 Machine number: 160450 Year of construction: 2003 Output: 50-2500 l / h Speed: 35-360 1/min Pressure: 1-15 BAR Engine: Nord, 3 kW Voltage: 400 V Connection suction side: DN 65 Port side: DN 50 Length: 1500 mm Other: with ventilation F100 Condition: used, ready

Attachment: eccentric screw pump Manufacturer: Allweiler Type: On BP 6.2 E21 P01 Machine number: 7612455 Year of construction: 1998 Performance: 1.67 8.3 l / h Speed: 120-600 1 / min Engine: Nord, type SK Voltage: 400 V Length: approx. 900 mm Condition: used, ready

REWA R35-2 Product no.: RE-HU-2015-0901-PEC2 System: eccentric screw pump Manufacturer: REWA Type: R35-2 Year: 2014 Flow rate: 8 m ³/h Pressure: 12 bar Speed: 960 rpm Motor: 4 kW / adjustable Other: hopper Material: Main body steel Shaft: Stainless steel Stator: Stainless steel Rotor: Stainless steel Shaft seal: Rubber

System: eccentric screw pump Manufacturer: REWA Type: R20-2 Year: 2014 Flow rate: 0.8 m ³/h Pressure: 12 bar Speed: 960 rpm Motor: 1.5 kW / adjustable Other: hopper Material: Main body steel Shaft: Stainless steel Stator: Stainless steel Rotor: Stainless steel Shaft seal: Rubber Condition: The pump has no hours of operation and is as good as new

Attachment: eccentric screw pump used Manufacturer: Allweiler Series: AED 1E 4250 Year of construction: 2000 Working temp.: approx. 20 ° C Viscosity at tA: approx. 500 mpa.s Density at tA: approx. 1.0 kg / m³ Pressure in the pressure connection: 2-6 bar Speed: 62-310 1/min Flow rate: 30-180 m, m³/h Engine capacity: 45.0 kW

System: Used trough screw conveyors Coil height: 280 mm Spiral distance: 290 mm Trough height: 325 mm Trough length: 5500 mm Width: 440 mm Overall length: 6700 mm Engine: Greifenberger 5,5 kW Other: Center bearing

System: Used screw conveyor Type: W-DA100LR-D Performance: 1415 r/min Shaft diameter: 90 mm Shaft size: 280 mm Coil height: 300 mm Spiral distance: 180 mm Trough height: 320 mm Trough length: 4200 mm Width: 450 mm Total width of the drive: 910 mm Motor: 3.0 kW Other: product-contacting parts stainless steel

Attachment: eccentric screw pump used Manufacturer: Allweiler Type: SNP 25.1 Version: H1P01 Machine number: 7655566/2 Year of construction: 1982 Capacity: 10L / min Speed: 230 RPM

Attachment: eccentric screw pump used Manufacturer: Netsch Type: NE 30 A Commissions No.: 305699 Machine number: 115945 Year of construction: 1980 Capacity: 2, 1 m³/h at 6 bar Speed: 355 1/min

Mild steel, length. 10.20 m Diameter: 420 mm, spout: 300 X 300 mm,. Drive: gear motor 7,5 kW Max. 135 RPM

Normal steel, length. 9.00 m, Diameter: 420 mm, outlet: round D = 300 mm Drive: Gear motor 4.0 kW with max. 100 UPM

Ex Center screw pump stainless steel Manufacturer: CSF inox Getirebe: Lenze Germany Type: 11.331.31.25.4 / 8829 N1-n2 = 107-556 min-1 No: 8/1206/519 Engine type: 180 M / 4 K2465 380 V, 50 Hz Power: 18.5 kW 1460 RPM Stator diameter: 170 mm Stator length: 790 mm Dimensions: LWH = 2900 x 460 x 1000 mm Weight: 600 kg

Ex Center screw pump stainless steel Manufacturer: CSF inox Transmission: Motovario Type: TK 100 N1-n2 = 190-1000 min-1 Motor: ASEA Power: 9 kW 380 V Stator diameter: 140 mm Stator length: 600 mm good condition Dimensions: LWH = 2500 x 460 x 660mm Weight: approx. 400 kg

Ex Center screw pump in stainless steel Manufacturer: CSF inox Transmission: Motovario (speed controlled) Type: TK 100 Engine: Leroy Somer 380 V, 50 Hz, power: 9kW n = 144 min-1 Stator diameter: 160 mm Stator length: 390 mm good condition Dimensions: LWH = 2600 x 450 x 600 mm Weight: approx. 500 kg

Ex Center screw pump stainless steel Manufacturer: CSF inox Statordurchmesser: 140 mm Statorlänge: 290 mm Transmission: Motovario (Italy) No.: 8816900 Type: TK 100 190-1000 min-1 Engine: Ercole Marelli (Italy) 380 V, 50 Hz, 7.5 kW Dimensions: LWH = 2300 x 460 x 600 mm Weight: approx. 400 kg Condition very good

Ex Center screw pump stainless steel Manufacturer: CSF inox Stator: Diameter 120 mm Statorlänge: 240 mm Transmission: Motovario No.: 88232123 Type: MKM/4 / 50 40-210 min-1 Engine: ABB motors LKeistung: 4 kW 1000 kg / h Dimensions: LWH = 1800 x 400 x 500 mm Weight: 300 kg good condition

Solid stainless steel case Transmission: Motovario speed controlled 190/1000 min-1 Type: TKR/100 Engine: Ercole Marelli Power: 7.5 kW, approx. 5 t / h 380 V good condition Dimensions: LWH = 2000 x 400 x 550 mm Weight: approx. 4100 kg

Eria Pompe Pacco Type: One 80-2/AA.T34 No.: 5930 Transmission: Spaggiari Transmissioni Type: RM 100/1 No.: 101730/99 Macdonald: Ercole Marelli Power: 9.2 kW Condition very good Dimensions: LWH = 2200 x 400 x 570 mm

Make: Allweiler Type: SEBP 200.1 E11 P01 No.: 7610156/1 Year of construction: 1998 N1-n2 = 50-155 min-1 Q = 10-60 l / min, 600-3600 l / h Stöber gear, to regulate speed Type: R47-2092-200-4 Engine Siemens in EEx e II Power: 2 kW Damaged stator Dimensions: LWH = 1450 x 400 x 430 mm Weight: approx. 80 kg Productsas variable in-let Out: DN 80 flange

Manufacturer: Allweiler Type: SEBP 200.1 E11 P01 No.: 7610156/2 Year of construction: 1998 N1-n2 = 50-155 min-1 Q = 10-60 l / min, 600-3600 l / h Drive North, speed control Motor North Power: 2kW in EEx e II Stator with traces of use Dimensions: LWH = 1400 x 200 x 600 mm Per Dukein outlet: Flange DN 80 Weight: approx. 80 kg

Mixing hopper with 2 paddle mixers Feed screw down Pump speed control Type: NM045SP02512B Com.: 35300131 MaschNr.: 289249 Year of construction: 1997 Condition very good Pump motor Flender in ex e II Performance: 3.6 kW, 1440 min-1 Transmission Lenze speed controlled 1 Paddle mixer: speed controlled N1-n2 = 28-143 min-1 Browse gear : KW 1.35 in Exx 2. Paddle mixer: 120 min-1, 1.35 kW in Exx Dimensions: LWH = 2800x500x700mm Weight: 600 kg Mixing and pumping of viscous products with solids

Type: NL 20 A Com.: 70 50 17 02 MaschNr.: 271872 Year of construction: 1996 unused Engine water cooled (0.75 kW) speed controlled transmission Pharmaausfuehrung Dimensions: LWH = 1400x300x450mm Weight: approx. 70 kg

Type: NUP 60 Machine number.: 218338 Com.: 205639 Year of construction: 1990 with screw feeder and paddle mixers Stöber gear Type R76-1027-750-4 No.: 874256 Rpm: 136-680 RPM Drive motor: DIETZ No.: 3807028 403195 B5/300 Power: 7,5 kW Paddle mixer power: 1,5 kW Mixing trough attachment approximately 150 l stainless steel Dimensions: LWH = 2400x630x1150mm with switchgear Weight: 600 kg

Type: SNZP 380.1 HX1P11 Year of construction: 1998 No. 7610158 Q = 30/167 l / min N = 60/220 l / min Drive North in EEx II Capacity: 3.3 kW, 400V Drive North N1-n2 = 33-258 min-1 Type: SK 33-R1960-112 M / 4 ED Dimensions: LWH = 2300x420x500mm Weight: 250 kg

Make: Netzsch Type: NES 30A No.: 40500562 / 01 Machinenr.: 255281 Year of construction: 1994 very good condition Gear: Stöber Type: C002N-0041-D90 L4 No.: 1088609 n = 330 min-1 Engine make: DIEZ Power: 1, 5kW Dimensions: LWH = 1300x250x270mm Weight: approx. 80 kg 2. Pump: identical, but with an off switch and adapter onto screw approx. 50 l Total height: 900 with funnel

Make: Allweiler Type: SZBP 100.1 E 11 P01 No.: 7602467 Q = 5-25 l / min = 300-1500 l / h n = 40-140 min-1 Year of construction: 1995 Condition very good Spare parts: 1 stator speed-controlled drive North Type: SK255F AL-R1500-100 L / 4E Dimensions: LWH = 1400x300x650mm Weight: approx. 120 kg

Used eccentric screw pump Nemo pump unit 4NE15A Built: 1997 Design: IMB3 Power: 0.75 KW Voltage: 230/400 V Speed: 624 rpm Machine No.: 284285 Direction of rotation: to the left, seen on drive shaft