subcategories
(3rd category level)
Manufacturer:
(Category: 107)
Qty. 1 Second-hand overhauled 4-Hi cold rolling mill Mfc.: SUECO (Member of IHI Group) Material of rolling Series 5000 & 6000 The rolling mill has been bought in 2023 and total overhauled. All revamped and painted of mill housing, coiler, gear box, roll chock, and backup rolls etc. Installed new electrical controls, hydraulic system, work rolls and other essential components. Please note that the new owner invested USD 2.1 Million in 2023. Strip width: 400 – 600 mm (650 mm) Thickness: 0.05 – 2.0 mm Rolling speed: 300 m/min. Gear type: 3.5:1 ID 508 mm OD 1500 mm Coil weight: 5000 kg Work roll dia.: 200 mm (200 – 180 mm) Length: 740 mm Back-up roll dia.: 650 mm (650 – 630 mm) Length: 720 mm Work roll drive Main mill drive power: 300 kW, 0-600/1800 RPM R/Tension reel power: 110 kW, 0-600/1800 RPM L/Tension reel power: 90 kW, 0-600/1800 RPM
1. Qty. 1 Second-hand 2-Hi reversing cold rolling mill – still in operation! Manufacturer: ACHENBACH Built: 1958 Moved to present location and revamped in 2021. All electrical cabinet with necessary component renewed in 2021. There is no PLC system. The machine controlled by Relay Control System. All bearings and some mechanical parts have been replaced. Status: Still in operation Material: Alu - Alloy 1XXX, 3XXX, 8XXX Strip Width: max. 750 mm Thickness: 0.1 mm ≈ 5.5 mm Main Motor: 380 kW, AC controlled by resistive cascade system Rolling Speed: 100 m/min Coil Weight: max. 2000 kg
Qty. 1 Second-hand slitter – still on foundation Mfc.: TBA Removed to new location: 2000 Stopped: 2022 Input coil characteristics: Strip thickness: 0.1 - 3.6 mm Cut strip width: max 600 mm Internal coil dia.: ø 290 - 650 mm Maxi. external coil dia.: 1100 mm Max. coil weight: 3000 kg Output coil characteristics: Internal coil dia.: ø 400 mm Number of strip cuts 7 times at thickness 3.5 mm Min. width of cut tape: 10 mm Tolerance of tape cutting width 0.2 mm
NOXON Schroeder + Bauer DPH 1400 Double Pallet Decoiler – Year 2001 Technical Specifications: Model: DPH 1400 Year of Manufacture: 2001 Serial Number: 167041 Tabe diameter: 1400 mm Max load: 3000 kg. Voltage: 400 V Frequency: 50 Hz Power Consumption: 0,75 kW Current: 14.2 A Weight: 1000 kg Strip pulling motor Loop control sensor Original documentation in English and schematics CE Certified Manufactured in Germany General Description: The DPH 1400 is designed for reliable coil unwinding from pallets, particularly suitable for large and heavy coils. With its robust construction and 1400 mm table diameter, it is perfect for demanding applications in metal forming, stamping lines, and automated feeding systems. Condition: Used, Fully functional Ready for immediate use German origin, well-maintained We can assist with international shipping and loading.
tube diameter: ? mmwall strength: ? mmbending radius min.: ? mmroll diameter: div. ca. 100 - 240 mmroll diameter - bore: 60 mmShipping weight: 950 kgPacking: 1,20,80,6 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Inv. Num. : 7215 Type: ENSIS 3015 AJ Producer: AMADA Created: 2021 Parameters: Laser ON: 9348 h Beam ON: 7276 h Laser power: 6 kW Feed length X-axis: 3000 mm Y-axis feed length: 1500 mm Feed length Z-axis: 100 mm Machine weight: 9500 kg
DURMA MS 2504 mechanical guillotine shears were built in 2014 in Turkey by DURMAZLAR MAKİNA SANAYİ ve TİCARET A.Ş. The machine, designed for precision cutting of workpieces with a maximum thickness of 4 mm, offers high reliability, precision and efficiency. Sheets made of among others stainless steel, copper or aluminium, are machined using high-quality cutting knives with adjustable gap between blades. Daily operation of the machine, on the other hand, is facilitated by the convenient foot switch and intuitive NC control. The DURMA guillotine shears weight 3230 kg. Technical specifications of the DURMA MS 2504 guillotine shears - NC control - maximum sheet metal length: 2550 mm - maximum sheet metal thickness: 4 mm - cutting angle: 1°30′ - number of strokes: 42/min - back stop stroke: 1000 mm - foot switch control - motor power: 7.5 kW - power supply: 3x 400 V; 50 Hz ...
ERMAK GMR 2600 X 4 mechanical guillotine shears were built in 2007 in Turkey by ERMAKSAN MAKINA SANAYI TIC. LTD. ŞTI. The machine, designed for precision cutting of workpieces with a maximum thickness of 4 mm, offers high reliability, precision and efficiency. The machining process is performed by high alloy steel cutting knives with adjustable gap between blades. Automatic hold-down system, in turn, prevent the sheet metal from sliding during machining, ensuring uninterrupted production of repeatable parts. Moreover, the operator’s daily work is facilitated by the convenient foot switch control and the intuitive NC control, which allows the creation of machining programmes in just a few steps. The GMR 2600 X 4 guillotine shears weighs 3750 kg. Technical specifications of the ERMAK GMR 2600 X 4 guillotine shears - NC control - maximum workpiece length: 2600 mm - maximum workpiec ...
sheet width: 2100 mmplate thickness: 2,0 mmdistance between columns: 2150 mmroll diameter: 90 mmtotal power requirement: 1,5 KWweight of the machine ca.: 0,7 tdimensions of the machine ca.: 2,5 x 0,7 x 1,3 mmSheet metal bending machine 3 rollers- 2 driven rollers- Foot switch- Emergency stop deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 30 mm: 30 mmflat steel: 50 x 10 mmL-beam: mmAxis diameter: 30 mmwork speed: 6,0 U/minroll diameter -toolpieces: 132 mmtotal power requirement: 0,75 kWweight of the machine ca.: 0,25 Kgdimensions of the machine ca.: 0,6 x 0,8 x 1,3 mProfile bending machine with:- 1 set of standard rollers- 2 rollers are driven- Horizontal or vertical operationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
ADIRA BB 3515 servo electric press brake was built in 2018 in Portugal by ADIRA – Metal Forming Solutions, S.A. The offered machine, apart from passing the start-up tests, has not worked in production and is like new. The ADIRA BB3515 CNC press brake is the perfect choice for precision machining of workpieces with a maximum length of 1500 mm. The machine is distinguished by the use of many state-of-the-art technical solutions, thanks to which it will meet all, even the most intensive challenges of modern business. The powerful electric drive developed in Bluedrive technology, is free of any filters, seals and hydraulic oil compared to a standard hydraulic system. This solution makes the machine much faster, quieter and more environmentally friendly than other presses available on the market. The electric drive also eliminates the occurrence of the so-called deflection arrow and its ...
BYSTRONIC ByStar 4400 laser cutting machine was built in 2006 by the Swiss brand BYSTRONIC. The machine, designed for precision cutting and engraving of sheet metal, is an excellent choice for any industrial plant. The machining process is performed using a stable 4.4 kW laser beam, which is generated by a resonator of the highest energy efficiency. As a result, the edges of the machined workpieces stand out for their unprecedented smoothness and lack of unevenness. ByStar 4400 laser cutting machine is offered with a range of equipment, including among others an intelligent CNC control and a KELLER industrial dust collector. The machine has undergone regular inspections and is ready for further use. BYSTRONIC laser weighs 13500 kg. Technical specifications of the BYSTRONIC ByStar 4400 laser cutting machine - CNC controller: BYSTRONIC ByVision - laser power: 4.4 kW (4400 W) - max ...
An EHT hydraulic guillotine shear refurbished in 2023 is available. Cutting length: 3000mm, max. sheet thickness steel/VA: 4mm/2mm, backgauge: 10mm-1000mm, adjustment speed: 180mm/s, stroke rate: 18-31 strokes/min, oil volume: 160l. Machine dimensions X/Y/Z: approx. 3700mm/2100mm/2150mm, weight: approx. 4800kg, operating hours: 44024h. The cylinders, blades and hoses were overhauled in 2023. On-site inspection is possible.
Useful cutting length 4,000mm Cutting thickness 4/7mm Adjustable blade spacing motorized backgauge with 1,000mm stroke programmer Adjustable cutting angle 250mm recess machine in good general condition visible in operation at our headquarters!
used
Cutting lenght 6000 mm Cutting thickness 13 mm
sheet width: 1050 mmplate thickness: 3,00 mmdistance between columns: mmtotal power requirement: kWweight of the machine ca.: 1,40 tdimensions of the machine ca.: m- Shear angle adjustment- Motorized backgauge up to 1000 mm with fine adjustment via handwheel- Sharpened blades- Operating instructionsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
INTERMAC PRIMUS 184 3D waterjet cutting machine was built in 2022 in Italy. This extremely powerful machine is designed for precise 3D machining of any type of glass. The process is performed by a 5-axis cutting head, which offers unlimited machining capabilities. It allows, among others, the cutting of complex patterns and the cutting of holes of any size with extreme ease. In order to guarantee excellent stability during even the most intensive challenges, the machine design is made of stress-relieved stainless steel. The movement of the X and Y axes is performed on hardened and ground tooth guides of high precision. On the other hand, the Z-axis moves via a prismatic recirculating ball screw. All the table’s travel components are protected by leak-proof covers. The offered PRIMUS 184 WaterJet also features an extensive equipment, which includes e.g. intuitive CAD/CAM software, ...
Automatic feed via E555 control with Windows operating system For mounting on any Elumatec single-head saw (right) Max. feed length: 6,000 mm
Two similar Stanley riveting punches are available. Both machines include rivet dispensers ERF 23 and 23.1. An on-site inspection is possible.
sheet width: 1350 mmplate thickness: 3 mmcutting angle: 1° 30 no. of strokes: 35 Hub/mintable height: 850 mmrear stop: 450 weight of the machine ca.: 1200 kgdimensions: ca. 1700 x 1650 x 2000 mmmanually operated back gauge 450 mmworking lifght includedsafety gate includedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
round bar steel: 28 mmsquare edge steel: 25 mmL-beam: 80 x 8 mmnotching cap. mild steel max.: 7 mmcutting capacity of the vertical shear: 350 kNPunch power: 190 kNshear: flat material: 100 x 11 mmshear: length of knifes: ca. 175 mmtotal power requirement: 1,5 kWweight of the machine ca.: 0,5 tdimensions of machine L x W x H: 1,0 x 0,5 x 1,5 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
tube diameter: 28 mmwall strength: 2 mmbending radius min.: 90 °Control: 3D TubeSoft Slim total power requirement: 3,5 kWweight of the machine ca.: - kgdimensions of the machine ca.: - mmDescription:Round tube steel (S235): 60.0 x 6.0 mmRound tube stainless steel (S 355): 60.0 x 4.0 mmSquare tube steel: 50 x 50 x 4.0 mmRectangular tube steel: 60 x 40 x 2.0 mmmax. usable length: 3048 mmBending speed: 10°/secincluding tools (see photos)Mandrel is no longer available, can be retrofittedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
plate thickness: 1,2 mmroll diameter: 62 mmthroat: 100 mmweight of the machine ca.: 50 kgdimensions of the machine ca.: 560 x 220 x 500 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 3100 mmplate thickness: 40 mmpre-bending: 32 diameter of upper rolls: 460 mmdiameter of lower rolls: 420 mmside roll diameter: 360 mmpower capacity: 30 kWmin. bending diameter: 1380 mmweight of the machine ca.: 30,1 tdimensions of the machine ca.: 6,3 x 2,3 x 2,6 m4 Rolls Hydraulic Bending MachineStandard Features:- hardened and polished rolls- complete body made of ST-52 steel- hydraulically opened/closed drop end controlled from control panel - digital readout for side rolls- top and bottom rolls are driven by hydraulic and gearbox. Bottom rolls vertical movements are hydraulic powered- separate control panel- oil cooler - conic bending- in accordance to CE-norm- Warranty 12 monthsOptional Accessories:- variable speed of rotation (5.858,00 Euro)- material feeding table (5.100,00 Euro)- center support (18.750,00 Euro)- 2 x side supports (15.000,00 Euro)The data for this ad ...
plate thickness: 0,8 mmthroat: 180 mmroll diameter: mmweight of the machine ca.: 22 Kgdimensions of the machine ca.: 500 x 450 x 160 mmFlanging machine is equipped with:- Emergency switch- Footswitch- 7 pcs. Roll setsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
plate thickness: 4 mmroll diameter: 125 mmthroat: 200 mmtotal power requirement: 2,2 kWweight of the machine ca.: 0,48 tdimensions of the machine ca.: 1,6 x 0,6 x 1,2 mm• 5 speeds• With foot control• With brake motor• With emergency stop• With hydraulic roller adjustment• With 4 roller setsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 1070 mmplate thickness: 2,0 mmdistance between columns: 1100 mmdiameter of upper rolls: 76 mmtotal power requirement: Handbetrieben weight of the machine ca.: 0,22 tdimensions of the machine ca.: 1,8 x 0,8 x 1,3 mmSheet bending machine with:- Capacity 1050 x 2 mm- High strength wrought iron rollers with SAE 1050 certificate.- Footswitch- conical bending- Swiveling top roller- Safety device emergency leash- Documentation- 400 volts- CE certificateThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max.: 1000 kgworkpiece diameter: 20-800 mmconnected load frequency: 230 Vspeed: 100 - 1000 mm/mintotal power requirement: 0,1 kWweight of the machine ca.: 65 kgdimensions of the machine ca.: 520x470x390 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max.: 5 tworkpiece diameter: 250 - 2500 mmdrum diameter: 250 x 100 mmfeed: 100 - 1000 mm/mintotal power requirement: 0,75 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 1070 mmplate thickness: 3,0 mmdistance between columns: 1100 mmdiameter of upper rolls: 95 mmtotal power requirement: 1,1 KWweight of the machine ca.: 420 Kgdimensions of the machine ca.: 1600 x 800 x 1200 mmMotorized sheet metal bending machine with:- Foot switch for left / right- manually adjustable rear roller- Hardened rollers- Conical bending- Swiveling top roller- Safety device emergency leash- Documentation currently only in English- 400V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
