subcategories
(3rd category level)
Manufacturer:
(Category: 107)
Key data: 80 t, 2000 mm
Inv. Num. : 7022 Type: PPEB-EQ 80/2000 Producer: LVD Created: 2008 Parameters: Control system: CADMAN CNC Compressive force: 80 t Maximum bending length: 2000 mm Stroke: 200 mm Distance between the frame walls: 1500 mm Maximum lifting speed: 130 mm/s Maximum bending speed: 11 mm/s Maximum retraction speed: 115 mm/s Total power requirement: 12.5 kW Main motor power: 7.5 kW
Max. pressing force: 200 kN Max. tool height: 100 mm Manual and automatic mode possible With Siemens program control Operating instructions
Key data: 225 mm
Sheet thickness 6 mm Knife length 225 mm Machine weight approx. 1.2 t Space requirements approx. 1.1 x 1.4 x 1.5m Total power requirement 55 kW Notching machine with fixed angle 90°
Key data: 6000 mm, 4 mm
With autom. Stacking and transport table, light barrier, cutting counter, with scrap diverter, compressed air required Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Sheet width: 6000 mm Sheet thickness steel: l 4.0 mm Sheet thickness aluminium: 6.0 mm Sheet thickness front: 2.0 mm Colour: grey Total power requirement: 11 kw/63 A Machine weight: 19,500 kg Dimensions: 6800 x 3500 x 2300 mm without cutting gap adjustment Hydraulic hold-down device Brpmi77K7Oq Column projection: 200 mm Cutting angle adjustment fixed: 1 degree Back gauge: 10 - 1000 mm Machine number: 107640
Folding bench, continuous segment 100 mm high, for U-profiles, without backgauge, Colour: blue, upper bolster stroke: 50 mm, without roller shears, bending angle: 145 degrees
for round diameters 70 - 1500 mm Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Working width: 1000 mm Sheet thickness steel: 1.5 mm Machine weight: 150 kg Dimensions/: 1200 x 800 x 1200 mm Colour: blue Projection: 350 mm Machine number: 4447
Key data: 1000 mm, 1 mm
with rebate groove and wire insertion grooves Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Sheet width: 1000 mm Sheet thickness: 1.0 mm . Colour: blue Machine weight: 45 kg Space requirement: 1200 x 400 x 1000 mm Shaft diameter: 50 mm
material width: 0380/460 mmcoil weight: 1,00 tcoil internal dia.: 340 - 440 mmcoil outside dia.: 1100 mmexpansion: mechanisch total power requirement: 1,50 kWweight of the machine ca.: 0,500 tdimensions of the machine ca.: 1,40 x 1,10 x 1,40 mwith bundle attachment arms at the back, sheet width 380 mmwithout bundle attachment arms, sheet width 460 mmhand crank3 bundle attachment armsright-left rotationtape scanning via proximity switch (start-stop) with time delayspeed control via handwheel 4-22 rpmmechanical brakeThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Specifications: Max. sheet width: 2500 mm Max. sheet thickness: 8 mm Weight, approx.: 6400 kg
stamp capacity: 2 - 63 mmthroat: 110 / 200 mmVarious Destaco punching iron, some with accessories:No. 3: Type 102-200, accessories: approx. 12 sets of punches and dies,technical data: see picture, price per piece incl. accessories: 350,-No. 6 & 7: Type 103-200, accessories: approx. 12 sets of punches and dies,technical data: see picture, price per piece incl. accessories 500,-1 Raskin punching iron type 10 JL 200, throat 210 mm, install height 238 mm, material thickness 3 mm in max. 40 kg/mm². pice 175,-- EUR1 Raskin punching iron type 15 BL 100, throat 110 mm, install height 149 mm, material thickness 3 mm in max. 40 kg/mm². pice 120,-- EURDiverse punching dies.We can also sell each of them.Machine dealer with own stock of 1600 m².The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Inv. Num. : 7935 Type: Trumatic 2000 R Producer: Trumpf Created: 2003 Parameters: Compressive force: 18 t Maximum length of sheet metal plate: 2070 mm Maximum blade width: 1270 mm Maximum sheet metal plate weight: 75 kg Max. sheet thickness: 6.4 mm Maximum punching speed: 900 1/min Machine height: 2070 mm Machine length: 6000 mm Machine width: 5600 mm Machine weight: 8000 kg
Key data: 22 t, 900 mm, 850 mm
Small Electric Press Brake C9s CoastOne - Made in Finland Pressing force: 22T Bending length: 900mm Spindles: 1x22T Control: TC15-2D Graphics Back gauge: 2 axis controlled X-R axes Bending tool holder: Type A / R1 / ES Style / AMADA Promecam 1x set of bending tools incl. 36 months warranty after installation Delivery excl.; at call Viewing under power possible at any time by appointment!
Key data: 22 t, 900 mm, 850 mm
Small Electric Press Brake C9s CoastOne - Made in Finland Pressing force: 22T Bending length: 900mm Spindles: 1x22T Control: TC15-2D Graphics Back gauge: 2 axis controlled X-R axes Bending tool holder: Type A / R1 / ES Style / AMADA Promecam 1x set of bending tools incl. 36 months warranty after installation Delivery excl.; at call Viewing under power possible at any time by appointment!
Ref.Nr. 00827 Name of the system Used Punching Laser Kombi Manufacturer: Finnpower Model LP 6 Year of manufacture 2007 Machine weight 18000 kg Punching force 300kN Max working pressure 300 Bar Operating hours = switch-on time (June 2024) 15137 h Program throughput time 21464 h Information about order confirmation at the time of purchase Working area 1500x3000mm Force 300 KN Punching force 3 clamping claws with central locking
Ref.Nr. 00791 Name of the system Blechturm Flat goods storage Manufacturer: Heitling GmbH & Co. Profil systems today Model HEI – TECHMAT - II Built in 1999 Payload/tray 34 kN Number of compartments 59 Storage capacity 2006 kN Sheet format 2000x4000mm Stacking height 55/70 Width: approx. 7,500 mm Depth: 5,000 mm tower + 5,500 mm with extended cassette Height: approx. 7,500 mm Deadline by arrangement - immediately Condition To be viewed under power Currently used next to a laser cutting system
Key data: 4000 mm
Ref.Nr. 00792 Name of the system: Used laser cutting machine Manufacturer: Bystronic Model Bystar 4020 Year of construction 2015 Power On (August 2024) 27.749 h Cutting time (August 2024) 9,665 h Power 6000 watts Control Byvision Working area 4000 x 2000mm Cutting range 170mm Interchangeable table system with 2 interchangeable tables + Extraction system + Cooler Cuttable thicknesses (max) steel 25mm Stainless steel 25mm Aluminum 15mm Footprint l x w x h 13850mm x 7300mm x 2350mm Machine weight 18000 kg Condition Technically very good condition Delivery by arrangement Immediately possible
The laser system for automatic sheet metal processing consists of two - Laser cutting machines Bystronic BySprint Fiber 3015 - Laser sources Bystronic Fiber 4000 - Laser loading/unloading systems Bystronic Bytrans 3015 - Bystronic storage systems - Suction Donaldson Max. sheet length: 3000 mm Max. sheet width: 1500 mm Cutting range: 3048 mm (x), 1524 mm (y), 70 mm (z) Max. positioning speed: 100 m/min Max. workpiece weight: 890 kg Laser power: 4000 watts Max. structural steel: 20 mm Max. stainless steel: 15 mm Max. aluminum: 15 mm Location: Zweibrücken Professional assembly and loading are included in the offer.
Key data: 3000 mm
The laser system for automatic sheet metal processing consists of two - Laser cutting machines Bystronic ByAutonom 3015 - Bystronic ByLaser 6000 laser sources - Laser loading/unloading systems Bystronic Bytrans Cross 3015 - Bystronic Bycell Cross 3015 storage systems - Suction Donaldson DFPR06-SPRK Max. sheet length: 3000 mm Max. sheet width: 1500 mm Cutting range: 3048 mm (x), 1524 mm (y), 80 mm (z) Max. positioning speed: 120 m/min Max. axle acceleration: 30 m/s² Max. workpiece weight: 890 kg Laser power: 6000 watts Wavelength: 10.6 μm Max. structural steel: 25 mm Max. stainless steel: 25 mm Max. aluminum: 15 mm Location: Zweibrücken Another identical plant is available at the site. Professional assembly and loading are included in the offer.
Inv. Num. : 7914 Type: PBM 7074 Producer: WEGENER Created: 2015 Parameters: Control system: Siemens Maximum bending angle: 90
2000mm 66 ton Y1 Y2 R1 Z1 Z2 X1 X2 Excellent condition With tooling
Table surface ... 3070x1660mm Nominal pressing force ... 18t Axis X ... 3070mm Axis Y ... 1660mm Max. sheet thickness ... 6.4mm Number of positions in the tool changer ... 22 Control Machine weight ... 14850kg L x W x H ... 7600x6700x2230mm The machine is in good condition, possible to test under power.
COLLY 1410S Press brake Bedknife Multi V-shaped clamp Capacity 140 t x 4050 mm Max. operating pressure 220 Passage between uprights 3100 mm Max stroke 7 - 250 mm Max distance between table and ram 500 mm Depth of throat 300 mm Table width 190 mm Locking speed 40 mm/sec Working speed 7 mm/sec Returning speed 50 mm/sec Dimensions 4250x1800x2995mm
TRUMPF Trumabend 125/3.1-DA24 hydraulic Press brake YOM 1994 Pressure 125 t chamfer lenght 3050 mm distance between columns 2550 mm total power requirement 15 kW column arm 350 mm ajustment speed 130 mm/sec work speed 1-10 m/min return speed 100 mm/sec back stop - adjustable 1000 mm Stroke 200 mm dayligth 400 mm Pressure power 280 bar dimensions of the machine ca. 3,6 x 2,3 x 2,8 m weight of the machine ca. 9,5 t Control unit CNC Maker of control unit DA24 4-Axis Control (y1,y2,x,r)
Inv. Num. : 7908 Type: Platino Fiber Producer: Prima Power Created: 2018 Parameters: Maximum power: 4 kW Switch-on hours: 14991 h Hours: 8209 h Work table length: 3000 mm Work table width: 1500 mm Machine weight: 10,000 kg Equipment: New cutting head
We offer for sale our Trumatic 5000R laser punching press. The machine is used and in very good condition. Basic data from the nameplate: Max cutting force: 220 kN Type 9121 No. 090038 Year of manufacture: 2001, spare parts Network: 400 V/50 Hz Connected load: 29kVA Supply voltage: 400V Ujznvnkmpx Control voltage: 24V= Necessary protection: 3x50A Compressed air connection: 7-14 bar Machine weight: 17500kg Main features of the machine: - Tool rail - 21 tools and 4 handles - Work surface 3070x1660mm - Max. sheet thickness 8mm - Axis of rotation of the tool head C1 and C2 - Form function - Thread function - Multibend function - Pneumatic press - Automatic sliding of details 500x500mm - Water-cooled servo motors Additional equipment of the machine: -Light barrier Softpunch function - Details of the slide sensor - Device for blowing out small details - Chi ...
Key data: 4 mm
Indumasch V 204 - Angle-adjustable notching machine Cutting length: 200 mm Capacity: 4 mm - Stroke adjustment with digital display - Lateral clippings ejection - Workplace lighting - Foot pedal Specifications - Cutting length: 200 mm - Cutting capacity steel: 4 mm - Cutting capacity stainless steel: 3 mm - Stroke rate: 60 /min - Cutting angle adjustment: 30 - 135 ° infinitely variable - Table dimensions: 1000 x 800 mm - Oil tank: 60 l - Motor power: 4 kW - Operating voltage: 400 V - Dimensions WxHxD: 1000 x 1480 x 1600 mm - Weight: approx. 970 kg More products, information & prices on metallmaschinen.at
For sale, we offer an Amada EML 3610NT punch-laser combination machine. The offered machine is used and in very good condition. Main features of the machine (overall): • Possibility of combining punching and laser burning • Automatic pick-up of details (suction cups for 45kg, small amount of perforation recommended) and replacement of pallets during the operation of the machine • automatic sheet feeding maximum length 3050x1500 and collection of residues after cutting, possibility of loading sheet metal during machine operation • Automatic bale boom 1500x400mm (two conveyor belts for details) • Turning station with 41 fixed and 4 rotating stations • 3 manually adjustable paws • Cutting elements on length 3020x1500 • Laser cut length 2000x1500 • Max. sheet thickness 6mm (due to brush table) • Thread function • Pneumatic low bracket Accessories for th ...
JORNS MAXI LINE 200SW folding machine was built in 2007 in Switzerland. The machine, designed for precision bending of various types of sheet metal with a maximum length of 6400 mm, is a HIGH variant, which offers a faster work speed of up to 25% compared to the standard model. During its use, the JORNS MAXI LINE 200 hydraulic folding machine has undergone regular maintenance. All moving parts and the bending bar were replaced with original manufacturer’s parts. Technical data of the JORNS MAXI LINE 200SW CNC folding machine - control system CNC 600 - maximum sheet metal length: 6400 mm - maximum sheet metal thickness: 2 mm - rear measuring table type 91 with AC servo motor - rear measuring table range: 1000 mm - roller shear SM 3 - foot switch - maximum hydraulic pressure: 250 bar - motor power: 7.5 kW - power supply: 380-420 V; 50 Hz
BLM ADIGE fiber laser Year 2010 3000x1500 3000W loading/unloading Lantek License Hours about 20 thousand sheet thickness 20 mm. Iron and 8/12 Stainless Steel
AMARON s.r.o.
