new
New unwinding reel with hydraulic spread: Payload 2.0 tons at 300 mm bandwidth Payload 1.8 tons at 450 mm bandwidth Payload 1.6 tons at 600 mm bandwidth Spine height 1410 mm Coil outer mennesser 1500 mm Spreading range 300-600 mm Hydraulic spread with hand pump, optional lyrify can be retrofitted ABS patent spread over 3 hydrocylinders with continuous eccentric. This reel is stocked in stock. The spreadjaws currently have a length of 600 mm. The price given here applies to : basic version but without push arm, hydro unit, manual hand pump. Delivery time: immediately from stock, intermediate sale reserved Control: Constant drive or control drive with loop control, initiator or ultrasonic for infinitely variable speed control. Additional price 3000 - 5700 â?¬, depending on the version. Delivery time for the control: 3 - 4 weeks
new
New decoiler with hydraulic spread: Capacity 3.0 Tons at 400 mm bandwidth Capacity 2.75 Tons at 650 mm bandwidth Capacity 2.75 Tons at 750 mm bandwidth Mandrel shaft height 1200 mm Coil-Outside Diamter 1500 mm Spreader range 450-600 mm Hydraulic spread with hand pump, optional electric pump. ABS patent spread over 3 hydraulic cylinders Options : pneumatic pressure arm, mouvable basement, brackets for round coil clamping The here given price is for standard version with electronic variable speed control, Ultrasonic-loop-control with selve-learning reel-calculater, Siemens SPS, drive Lenze or Siemens. The decoiler is on stock, the brackets will be produced belong to the needed bandwidth. Delivery-time is about 6 weeks
new
Decoiler double reel double lab winding reel model AHMD2.0H Manufacturer: ABS Schwabe Germany. It's a demonstration machine: Bandwidth at 1.5 t = 600 mm Bandwidth at 2.0 T = 400 mm The reel with the corresponding coil weight may be charged depending on the bandwidth. -Stable base frame in welded bolt steel - shooting wreath storage with pneumatic locking - procedures establishment with crank spindle for band-middle-centering -Hydraulic spread with hand pump, can be converted to electric hydraulic -Spreader range 350-600 mm -Thornless version for free loading with ABS-Patent-Expansion vertically from behind about 3 hydraulic cylinders with mechanical forced centering -Drive gear motors that control drive with infinitely variable speed control Dancer position control with self-learning control Siemens PLC controller Lenze, KME or Siemens
used
This winding system was planned for a material inspection by an oven. The material should run around a roller in the oven and be heated there. The winding reel pulls the belt over a very slow drive (1 m/min max.) Load 2x 1t. The system can be converted at any time or the machines can be sold individually.
used
type - UC 30-500-3.5 Year of construction 1992 Dimensions 1.9 x 0.8 x 2.2 m - High Btto 1600 kg + hydraul. Car 0,8x0,75x0,8 - 370 kg Coil outer diameter up to 1800 mm (possible, space under pressure roller) Coil width 550 mm Payload 3500 kg - hydraul. Recording - motor. Drive entire reel - pneumat. Pressure roller, adjustable - Infrared control - Documents, circuit diagrams, etc.
used
sheet width - max.: 0600 mmcoil weight: 3,00 tcoil internal dia.: 465 - 530 mmtotal power requirement: kWweight of the machine ca.: 2,45 tdimensions of the machine ca.: 2,72 x 1,70 x 2,40 mmaterial width (previously) 400 mmmandrel length 630 (655) mmmandrel – Ø (expanding range) 465 – 530 mmheight floor - middle of mandrel 1.450 mmheight upper edge decoiler construction - middle of mandrel 1.050 mmworking direction (previously) right - leftaccessories:construction 3-segment-constructiondecoiler movable on base frame hydraulicallypress arm hydraulicallypress roll not drivenexpanding process mechanicallydecoiler motor driven (via chain) power 3,0 kWno. – limiting arms 6dimension – limiting arms (l x h) 410 x 180 mmvalve components mounted at decoiler constructioncontrol unit (breaker unit) with cablehydraulic unit not availableThe data for this ad was created with ModulMWS - the ...
used
coil weight 3,0 t material width 600 mm coil inside diameter 465 - 530 mm weight of the machine 2,45 t required space approx. 2,72 x 1,70 x 2,40 m material width (previously) 400 mm mandrel diameter (expanding range) 465 – 530 mm height floor - middle of mandrel 1.450 mm height upper edge decoiler construction - middle of mandrel 1.050 mm working direction (previously) right - left accessories: construction 3-segment-construction decoiler movable on base frame hydraulically press arm hydraulically press roll not driven expanding process mechanically decoiler motor driven (via chain) power 3.0 kW no. - limiting arms 6 dimension – limiting arms (l x h) 410 x 180 mm valve components mounted at decoiler construction control unit (breaker unit) with cable hydraulic unit not available
used
Capacity - 3000 kg Band width 500 mm Coil inside diameter - 320-640 mm Outer diameter 1500 mm hydraul. Spreading Motor. Drive 1.5 kW
used
sheet width: 250 mmcoil weight: 2,5 tcoil internal dia.: 450 - 530 mmsheet thickness - max.: 4 mmcoil outside dia.: 1400 mmtotal power requirement: kWweight of the machine ca.: 1000 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Description: Maximum width 650 mm Coil weight 2 x 2500 Kg Chuck diameter 430 mm maximum coil diameter 1350 mm Hub maxi diameter 520 mmdimensions (l x w x h) approx.: 3,000 x 2,000 x 1,800 mm, weight approx.: 900 kg
used
sheet width: 300 mmcoil weight: 1,2 tcoil internal dia.: 480-550 mmdimensions of the machine ca.: BxTxH 1200x1200x2000 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
material width: 100-800 mmcoil weight: 5 tmaterial thickness: 0,4-1 mmsheet width: 100-800 mmcoil internal dia.: 450-530 mmcoil outside dia.: 600-1800 mmspeed: 2-15 m/mintotal power requirement: 4 kWweight of the machine ca.: 2,5 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Width 500 mm Load capacity 1500 kg coil outer diameter 1450 mm Spread 370- 630 mm Motor 1.1 kW Btto 400 kg
used
Coil weight... 5 to. Coil ID... 470 - 520 mm Coil AD 1,500 mm Bandwidth. 1,800 mm Band thickness. 0.5 - 2.0 mm Support arm frontal
used
Double reel 2 x 2500 kg Bandwidth - up to 350 mm
used
Load capacity 20 kN, strip width 450 mm, Coil inner diameter 445-530 mm Coil outer diameter 1400 mm Drive power 1.5 kW Rolling speed CONTROLLABLE with frequency converter Danfoss VLT 2800 Manual spreading of the reel crown Btto 600 kg
used
Capacity 20 kN, band width 500 mm, coil inner diameter 445-530 mm Coil outer diameter 1300-1400 mm Drive power 1.1 kW Rolling speed 16 U/min Manual spreading of the reel Crown with hydraulic unit complete documentation, operating instructions and manual
used
Payload 1000 - 1250 kg Band width 305 and 505 mm Spreading range - 375 -520 mm Coil outer diameter 1300 mm without cabinet and control
used
sheet width - max.: 320 mmcoil weight: 2,5 tcoil internal dia.: 380-630 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Coil inner diameter 460 - 560 mm Coil outer diameter. Max. - 1500 mm Bandwidth - 350 mm Payload 2 t without drive, adjustable. Disc brake btto - 640 kg more info on request
used
sheet width: 300 mmcoil weight: 1 tcoil internal dia.: 375-550 mmcoil outside dia.: 1600 mmweight of the machine ca.: 0,5 tdimensions of the machine ca.: 1500x1500x1900 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
sheet width: 300 mmcoil weight: 2 tcoil internal dia.: 375-550 mmcoil outside dia.: 1600 mmweight of the machine ca.: 720 kgdimensions of the machine ca.: 1500x1500x1900 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
sheet width - max.: 2100 mmcoil weight: 25 tcoil internal dia.: 470 - 630 mmcoil external diameter: 1800 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mLine speed - originally max. 80 m/min.Working direction - originally left - rightAccesories:- Reel can be moved hydraulically on the base frame- Drive motor – DC power 50 kW- Spread hydraulically- Pressure arm (2 x) with pressure roller (2 x) double constructionPressure arm and pressure rollers hydraulicUnwinding process possible from above + from below- Brake unit / disc brake pneumatic- Electrical control cabinet + control panel- Documentation partly available- Hydraulics not availableThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
capacity 25,0 to. material width 1.800 mm mandrel length 2,100 mm coil inside – Ø 478 – 630 mm coil outside – Ø max. 1,800 mm speed – originally max. 80 m/min working direction – originally left - right accessories: ● decoiler mavable on base frame hydraulically ● motor – DC power 50 kW ● expanding process hydraulically ● press arm (2 x) with press roll (2 x) double construction press arm and press roll hydraulically decoiling process from above + from below possible ● brake unit / disc brake pneumatically ● electric control cabinet + control desk ● documentation partially available ● hydraulic unit not available
used
Capacity 10 tons Maximum band width 180 cm Pressure roller, etc. Complete documentation more info on request
used
sheet width - max.: 1150 mmcoil weight: 2,00 tcoil internal dia.: 500 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: 3,65 x 1,60 x 2,15 mDECOILER with coil loading chairWorking direction (originally) left - rightHeight of transfer roller - center reel head 995 mmAccesories:decoiler mounted on subframedecoiler equipped with drive (power 3 kW)decoiler shift hydraulicSpread hydraulicallyCoil loading chair – integrated in the coiler substructure above the floorMake KRAUS / model HTS 3000Execution of scissor lift construction (hydraulic)Year of construction 2009 / load capacity 3.0 tons. / Prism length 655 mmHydraulics attached to the frame constructionThe coiler was originally integrated into a press lineThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
DECOILER with coil lifting unit coil weight 2,00 (3,00) t material width 1,150 mm inside coil diameter 500 mm required space approx. 3,65 x 1,60 x 2,15 m working direction (originally) left - right height conveyor roll - middle of mandrel 995 mm accessories: decoiler mounted on subconstruction frame decoiler equipped with motor (power 3 kW) decoiler movement hydraulically expanding process hydraulically coil lifting unit - over floor integrated in subconstruction frame manufacturer KRAUS / type HTS 3000 scissors lift construction (hydraulically) year of construction 2009 / capacity 3,0 to. / prism length 655 mm hydraulic unit mounted at frame construction decoiler was originally integrated into a press line
used
sheet width - max.: 0500 mmcoil weight: 2,00 tcoil internal dia.: mmrange of expansion ca.: 460 - 530 mmcoil outside - diam. ca.: 1400 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m- driven by an electric motor- Loop control via sensor- Selector switch right / left rotation- motor spread- New control with manual control unit- 6 pcs Band Limiting ArmsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
Technical data: -Coil weight: 3.000 kg -Strip width: 1,000 mm -hydr. Spreading -2,2 kW geared motor with controller 380 V, 50 Hz. -Loop control arm start-stop -Electrical cabinet forward / backward / stop -Steel segments -Expansion 475-525 mm -Speed 0-25 m / min. -Coil outer diameter. 1500 mm
used
Technical data: -Weight of coil: to 3. -Strip width: 600 mm -hydr. Spreading -2,2 kW geared motor with controller 380 V, 50 Hz. -Loop control arm start-stop -Electrical cabinet forward / backward / stop -Steel segments -Expansion 475-525 mm -Speed 0-25 m / min. Coil outer diameter. 1500 mm
used
DECOILER (with coil lifting unit) type HAEMH 5000/1600 capacity 5,00 to. mandrel length 1,600 mm expanding range 460 – 530 mm mandrel – Ø 508 mm mandrel – Ø with steel segments 610 mm height floor to middle of mandrel 1,220 mm coil outside – Ø 1,400 mm working direction (previously) left - right required space (L x W x H) approx. 8,000 x 2,500 x 2,200 mm weight approx. 8,10 to. accessories: ● paper coiling unit motor driven (ground erection) sleeve width max. 1,600 mm sleeve inside diameter 76 mm ● base frame with integrated gear rack (decoiler movement) ● coil lifting unit - over floor – integrated in decoiler base frame ● decoiler motor (auxiliary drive) power 1.1 kW expanding process hydraulically press arm hydraulically press roll driven (motor driven by chain) power 0.75 kW decoiler movement motor d ...
used
sheet width - max.: 0670 mmcoil weight: 5,00 tcoil internal dia.: 500 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: 3,50 x 2,50 x 2,70 mDECOILER with coil loading chairWorking direction (originally) left - rightHeight of prism OK - center reel head 870 mmAccesories:decoiler mounted on subframedecoiler equipped with drive (power kW) - disc brake pneumaticMotorized reel shift (via spindle)Spread hydraulicallyPressure arm lifting/lowering and shifting hydraulicallyPressure roller (double roller) hydraulically driven (via chain)Flanges - diameter 1,700 mmQuantity - Band Limiting Arms 2Coil loading chair – integrated in the coiler substructure above the floorHydraulic lifting/lowering / prism length 480 mmControl cabinet 5 doorsHydraulic power 22 kWControl panel on tripodThe coiler was originally integrated into a press lineDimensions (L x W x H) ...
used
DECOILER with coil lifting unit coil weight 5,0 t material width 640/670 mm coil inside diameter 500 mm working direction (originally) left - right height prism upper edge - middle of mandrel 870 mm accessories: decoiler mounted on substruction frame decoiler equipped with motor (power kW) - disc brake pneumatically decoiler movement motor driven (via spindle) expanding process hydraulically press arm lifting/lowering and movement hydraulically press roll (double roll) hydraulically driven (via chain) counter plate diameter 1.700 mm no. - limiting arms: 2 coil lifting unit - over floor integrated in decoiler subconstruction frame lifting/lowering hydraulically / prism length 480 mm control cabinet 5-doors (SIEMENS SIMATIC S5) hydraulic unit power 22 kW control desk on rack decoiler was originally integrated into a press line. dimensions (l x w x h): de ...
new
Load capacity - 1000 kg Outer diameter - max. 1200 mm Spreading range 550 - 750 mm Bandwidth max. 350 mm Spreading process - manual Reel drive - three-phase motor 400 V / 50 Hz Unwindspeed max. 30 m / min
used
• Bandwidth / strip width: 1,600 mm • Strip thickness / strip thickness: 0.4 - 2.0 mm • Coil inner / coil inner-a:390-420 mm • Coil outer / coil outer-a: 1,500 mm • Spreading/ spreading: hydraulic/hydraulic • Motor drive AC servo cooling • For invertrers • Speed: 15 m/min. • Attachment segments for 500 mm • Reel shift: 200 mm • Working method: from top and bottom • Hydraulic valves on board
used
• Bandwidth / strip width: 1,500 mm • Band thickness max/strip thickness max.: 0.4 - 2.0mm • Coil inner / coil inner-a: 508 mm • Coil outer / coil outer-a: 1,500 mm
used
sheet width - max.: 250 mmcoil weight: 150 kgcoil internal dia.: 290-550 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
sheet width - max.: 250 mmcoil weight: 150 kgcoil internal dia.: 300-500 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
sheet width - max.: 250 mmcoil weight: 250 kgcoil internal dia.: Ø 290-550 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
sheet width - max.: 300 mmcoil weight: 150 kgcoil internal dia.: 200-520 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
sheet width - max.: 335 mmcoil weight: 1,00 tcoil internal dia.: mmcoil outside - diam. ca.: 1293 mmtotal power requirement: kWweight of the machine ca.: 0,448 tdimensions of the machine ca.: 1,3 x 1,01 x 1,60 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
sheet width - max.: 0100 mmcoil weight: 0,150 tcoil internal dia.: 320 - 520 mmcoil outside - diam. ca.: 1200 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m- manually adjustable brake- Rear handguard- Restriction ring in front- Movable on frameThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
YOC 2009 Payload 1500 kg Coil inner diameter from 470 - 630 mm Coil outer diameter. 1600 mm Speed 12 rpm Frequency Dimensions - cca 1.7 x 1.4 x 1.7 m Btto - 850 kg More info on request
used
coil internal dia.: 260-600 mmcoil width: ca 150 mmOverall size: 800x1000 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Material width: 0300 mm Coil weight: 0.5 t Coil inner diameter: 270-360 mm Coil outside diameter: 1000 mm Speed: m/min Weight: 0,4 t JAWS: 200 mm extension of the diameter
used
Driven Coiler (electric) Manufacturer: OBRU Type: SAH III.ZM (67185) Max load capacity: 300 kg Coil inner diameter: 250 - 350 mm Coil outer diameter: 800 mm Max width of coil: 300 mm Voltage: 380 V
used
Description: material thickness 0.5-3mm material inner diameter 450-610 mm material outer diameter 1500 mm feeding speed 0-20 m/min feeding accuracy ±1mm/m loading trolley 10000 kg coil weight 10000 kg leveller dimensions 2300 x 2000 x 1250 mm dimensions 3200 x 1970 x 2040 mm weight approx. 2500 kg dimensions (l x w x h) approx.: 3,200 x 1,970 x 2,040 mm, weight approx.: 2,500 kg
used
max. coil weight - 2000 kg Belt width 500 mm Coil external dimension - cca 1400 mm Pneumat. Pinch roller
used
• Bandwidth / strip width: 1,500 mm • Strip thickness / strip thickness: 0.4 - 2.0 mm • Coil inner / coil inner-a: 508 mm • Coil outer / coil outer-a: 1,600 mm • Spreading hydraulic/hydraulic • With drive motor / with drive motor • Electric control new with controller (inverter)
used
coil weight 5,0 t mandrel length 650 mm mandrel diameter 400/508 mm coil diameter approx. 1.720 mm height floor - middle of mandrel approx. 850 mm speed approx. 100 m/min. power 20 kW accessories: expanding process - hydraulically type of brake - motor driven press arm press roll paper winder decoiler - movable working direction right - left hydraulic