subcategories
(3rd category level)
Manufacturer:
(Category: 107)
Machine is in good technical condition, a visit and a test run are possible by prior arrangement.
Max. punching and shearing capacity: 800 kN For example, punches 25 mm holes in 20 mm steel Shears on the flat steel shear on 350 mm to 15 mm steel Further technical data on request With an assortment of stamps and dies as desired
A cylinder roll punching machine Adolf Illig is available. Pass-through width: approx. 850mm, pass-through height: approx. 120mm, roll diameter: approx. 190mm, table dimensions X/Y/Z: 2x approx. 1200mm/1200mm, working height: approx. 800mm, machine dimensions X/Y/Z: approx. 2700mm/1350mm/1550mm, weight: approx. 900kg. An on-site inspection is possible.
Sheet thickness iron: 0.75mm, sheet thickness steel: 0.5mm, working width: 780mm, stroke rate: 135/min. An on-site inspection is possible.
Lg.Nr. 25062 Specifications: - with pressure joining pliers ECKOLD, type MZ + hole punching device - Working pressure infinitely adjustable max. up to 500 bar - Compressive force joining pliers 25 Kn - Single cycle or continuous cycle - Cycle rate infinitely adjustable - Hose package unit – pliers approx. 4 m - Hydraulic oil capacity 15 ltr - Drive 400 V / 3 kW - Space requirement approx. W 550 x H 850 x D 650 mm - Weight approx. 150 kg
Qty. 1 Second-hand lathe CNC machine Manufacturer: VERNET BEHRINGER Machine type: FG 2005 CNC Definition: Sheet metal drilling line Year of construction: 2012 Voltage supply: 380 V, 3 ph., 50 Hz, Ground Control voltage: 24 V DC Installed power: 90 kVA Hydraulic unit: 15 l/min Central motor power: 4 kW Medium pressure: 130 bar Oil volume: ≈120 liters Limits of sheet metal dimensions to be machined Min. section: 100 x 100 x 5 mm Max. section: 2000 x 1000 x 40 mm & 1340 x 1000 x 60 mm
4-rolls Kramatorsk plate bending machine Ultimate tensile strength of material: 500 MPa (50 kg/mm²) Yield strength – cold bending: 250 MPa (25 kg/mm²) Yield strength – hot bending (primary): 100 MPa (10 kg/mm²) Yield strength – hot forming (secondary heating): 45 MPa (4.5 kg/mm²) Elongation at cold state: ±18% Maximum sheet width: 4000 mm Max sheet thickness – cold, without pre-bend: 71 mm Max sheet thickness – cold, with pre-bending: 63 mm Max sheet thickness – hot forming: 150 mm Minimum bending radius – cold: 560 mm Minimum bending radius – hot: 600 mm Maximum radius for closed bending (curled edge): 1000 mm Main motor: 160 kW Weight: 730 tons
Key data: 350 mm, 2 t, 1500 mm
Double decoiler Load - 2 x 1500 kg Belt width 350 mm Coil outer diameter - up to 1600 mm Coil inner diameter - 360-530 mm Manualle hydraul. Spread Pneumat. Pinch roller mechanical brake Dimensions - approx. 2 x 2 x 2.2 m WxDx H Bto - 1000 kg
Belt width 350 mm Number of straightening rollers - 11 pcs Diameter 60 mm Capacity 350 x 2.5 mm Motor 4 kW Speed adjustable by variator drive
STROJARNE PIESOK NTC 2500/4 guillotine shears were built in 1985 in Czechoslovakia. The machine, distinguished by its extremely sturdy design, is used for cutting sheet metal with a maximum thickness of 4 mm. The machining process is performed by high-quality cutting blades with an electrically adjustable gap between the blades. The NTC 2500/4 guillotine shears weighs approximately 3800 kg. Technical specifications of the STROJARNE PIESOK NTC 2500/4 guillotine shears - maximum sheet metal thickness (Rm=450 MPa): 4 mm - minimum sheet metal thickness: 0.6 mm - maximum sheet metal length: 2500 mm - cutting angle: 1°33′ - reach: 200 mm - back stop stroke: 4-750 mm - back stop drive: electric - back stop motor power: 0,25 kW - main motor power: 4 kW - installed power: 6.5 kVA - power supply: 3x 380 V; 50 Hz - dimensions (L x W x H): 3100 x 1600 x 1500 mm - weight of the mac ...
Key data: 40 t, 2000 mm
Inv. Num. : 8524 Type: PPM 20040 Producer: HACO Created: 2015 Parameters: Compressive force: 40 t Maximum bending length: 2000 mm
useful stroke: 1.700 mmworkpiece weight: 2,20 trotation: +/- 190 °stroke speed: 1,00 / 0,50 m/minRotating speeds: 0,50 U/mincomponent measurement max.: 6.000 x 2.550 x 1.400 mmControl: SIEMENS HMI total power requirement: 8,00 kWweight of the machine ca.: 8,00 tdimensions of the machine ca.: 6,00 x 4,00 x H4,00 mHYWEMA lifting and turning device.The product is used as a work aid to lift loads for ergonomically favorable assembly- or welding work.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Inv. Num. : 8519 Type: MicroCut 3001.15P Producer: MicroStep Created: 2007, GO 2017 Parameters: Software: AsperWin Basic (2007) Work table length: 3000 mm Work table width: 1500 mm Maximum sheet thickness when cutting: 40 mm Maximum sheet thickness when cutting (stainless steel): 40 mm Maximum sheet thickness (brass): 12 mm Maximum sheet thickness (copper): 12 mm Plasma Source: Formica ForCut 163W Burner: MT120
Inv. Num. : 8517 Type: DS 6001.20PrkBk AF M Producer: MicroStep Created: 2018 Parameters: Control System: iMSNC Software: AsperWin Basic (2018) Switch-on hours: 12800 h Operating hours: 3400 h Work table length: 6000 mm Work table width: 2000 mm Maximum sheet thickness when cutting: 50 mm Maximum sheet thickness when cutting (stainless steel): 6 mm Maximum sheet thickness when cutting (aluminium): 6 mm Plasma Source: XPR300/A Core Machine height: 2630 mm Machine length: 16735 mm Machine width: 9260 mm Machine weight: 22180 kg Equipment: Technical documentation Drilling unit Wittur DSF 4-19.3-20I. R3-GBL (26 kW) Filtration DFPRO-8 ART501 (11 kW) Automatic loader with suction cups Positioning gripper on the X-side Roller conveyors at the inlet and outlet Conveyor belt at the small parts outlet Automatic calibration of tool geometry for rota ...
Inv. Num. : 8515 Type: HS 3001 Producer: MicroStep Created: 2007 Parameters: Software: Asper 5.0 - Basic Switch-on hours: 16300 h Operating hours: 4400 h Work table length: 3000 mm Work table width: 2000 mm Maximum sheet thickness when cutting: 25 mm Maximum sheet thickness when cutting (stainless steel): 20 mm Maximum sheet thickness when cutting (aluminium): 20 mm Plasma Source: Hypertherm HPR 130/A Equipment: Technical documentation Filtration Vanterm PL-8000 (7.5 kW) New PC (2022) with Windows 10
AMADA VIPROS 2510 KING CNC punching machine was built in 1998 in Japan by AMADA CO., LTD. The machine, distinguished by its extensive machining capabilities, is an excellent choice for the production of precise parts with the highest quality. It is capable of punching holes in sheet metal made of, among others stainless steel and aluminium, with a maximum thickness of 6.4 mm. The machining process is performed on a large brush table, which prevents scratches and scrapes on the sheet surface, and also significantly reduces noise level. All this is completed by an intelligent FANUC CNC control in which the most advanced machining programmes are created in just a few steps. The AMADA VIPROS 2510K punching machine weighs 11000 kg. Technical specifications of the AMADA VIPROS 2510 KING punching machine - CNC control: FANUC Series 18-P - maximum press force: 20 t (196 kN) - feed in the X ...
AMADA EUROPE 255 CNC punching machine was built in 2004 in France by AMADA EUROPE S.A.. The machine, designed for machining thin sheet metal of a maximum thickness of 3 mm, is distinguished by its high efficiency and reliability. In order to obtain the highest precision of the produced parts, all the machining processes are performed on a large brush table. This table, thanks to its design, prevents scratches and nicks on the sheet metal during the material feed, and also significantly reduces the noise level. The EUROPE 255 punching machine is also offered with extensive equipment, including e.g. a cooling unit, light curtains and an advanced GE FANUC CNC control. The total weight of the machine is 11000 kg. Technical specifications of the AMADA EUROPE 255 punching machine - maximum press force: 20 t (200 kN) - feed in the X/Y axis: 1280/1320 mm - feed rate in the X,Y axis: 82 m/m ...
Very few working hours: approx. 200 h Technical and visual condition: very good+ Pictures attached Price: 16.000 EUR net ExW Heavy welded steel construction Horizontal and vertical work possibility All three rollers driven by hydraulic motor and planetary gear Hardened rolls Hydraulic delivery via two lower rollers Lateral mechanical straightening rollers, infinitely adjustable Separate control panel with foot control and 2 digital displays Bending performances profile type optional Explanations for bending performance, profile type optional The performance data apply to material with a max. Yield strength of 24kg / mm². Bending power at VA: factor 0.7 Bending performances profile type standard Square material dimensions [1] 45 mm Square material min. bending Ø [1] 500 mm Square material dimensions [2] 15 mm Square material min. bending Ø [2] 380 mm Flat material l ...
Ref.Nr 00880 Name of the 3D FIBER laser tube cutting machine Manufacturer Bystronic TTM Model TTM FL170 Year of construction April2018 Laser Lessons 22630 h Options: System for 3D cutting 8500mm Pipe Payload - Rear Pipe single loader from the front 8500mm Condition Good condition Specifications: Smallest pipe length in automatic feeding 3100mm Largest pipe length in loading 8500mm Max. pipe weight 25kg/m Cross-sections Round, square, rectangular, oval, etc Dimensions round cross-section (min./max) 12mm 168mm Dimension square cross-section (min./max) 15x15mm 120x120mm Rectangular cross-section (min/max) All rectangles that fit into a circle of 168mm Travel distances laser cutting head Y = 375 mm Z = 390mm Max. linear speed of the mandrels 130m/min Speed of axis of the cutting head Y = 100 m /min Z = 100 m/min Rotary movement of the Mandrels M ...
FOR SALE – AMADA PROMECAM HYDRAULIC PRESS BRAKE Model: ITPS – Length 2000 mm – Force 50 Tons With DELEM DA-65R numerical control ⚙️ TECHNICAL FEATURES: Brand: AMADA PROMECAM Model: ITPS Folding length: 2000 mm Maximum force: 500 kN (i.e. 50 tons) Maximum stroke: 105 mm CNC : DELEM DA-65R Date of manufacture: 03/02/1999 Voltage: 380 V / 50 Hz – Tri Current rating: 125 A Installed power: 11 kW Machine weight: 3450 kg Condition: Good working condition Comes with complete bending tools Photos available: General condition, numerical control, nameplate. Asking price: 12.500 € HT] ✅ Truck-mounted loading capability ✅ Ready-to-work machine
FOR SALE: AMADA PROMECAM GS 1230 Hydraulic Guillotine Shears – 3050 mm / Up to 15 mm Steel Precision industrial machine – Very little used – Former training centre Pristine condition – Works flawlessly – Ready to use ✅ Technical characteristics: • Model: AMADA PROMECAM GS 1230 •Type: Hydraulic Guillotine Shear • Useful cutting length: 3050 mm • Maximum thickness: 12 mm standard steel, up to 15 mm on steel sheet • Motorized backgauge (numerically controlled) • Cutting angle and blade spacing adjustment • Integrated ball table for moving sheet metal • Hydraulic front holding cylinders • Power: 15 kW / 20 HP – Three phase • Power supply: 400/415 V – 32 A – 50 Hz • Cutting force: 361 kN • Blade stroke: 190 mm •Year: 1999 •Made in Europe – AMADA reference brand Applications: Perfect for industrial boilermaking, shee ...
Inv. Num. : 8487 Type: ENSIS 3015 AJ Producer: AMADA Created: 2019 Parameters: Maximum power: 6 kW Switch-on hours: 19,588 h Operating hours: 10,631 h Work table length: 3000 mm Work table width: 1500 mm Feed length X-axis: 3000 mm Y-axis feed length: 1500 mm Feed length Z-axis: 100 mm Machine weight: 9500 kg
ERMAK RPP 1270X30 punching machine was built in 2013 in Turkey by ERMAKSAN MAKINA SANAYI VE TIC. AŞ. The machine, which is distinguished by its high productivity and precision, is used in the machining of thin sheet metal with a maximum thickness of 6.35 mm. All machining processes are performed on a large brush table by a reliable working head, which operates with a maximum force of 30 tonnes. The brush table prevents scratches and nicks on the sheet metal surface during material feed, and also significantly reduces noise level. All this is complemented by a FANUC CNC control with an intuitive interface that allows advanced machining programmes to be created in just a few steps. The ERMAK RPP 12730 CNC punching machine weighs 11000 kg. It is also possible to purchase Metalix CAD/CAM software at an additional cost of 10500 EUR net. Technical specifications of the ERMAK RPP 1270X30 ...
Bending Machine FEMAS PI 30.45 - 3000 x 45 t. - NC ESA 400, Information about technical data are not binding., Machine available subject to prior sale., Capacity: 450 Kn, Bending lenght: 3050 mm, Distance between shoulders: 2550 mm, Throath depth: 350 mm, Approach speed: 50 mm/s, Bending speed %smm/s: 10 mm/s, Return speed: 68 mm/s, Backgauge type: Motorized, Backgauge travel: 500 mm + R, Cn: ESA TRIA KLT 400 (3 axes), Main motor power: Kw 5,5, Weight: 5.500 Kg, Accessories: Tool set
punching pressure: 16 tplate thickness: 8 mmplate length max.: 1250 mmsheet width - max.: 1000 mmengine output: 13 kWcontrol: Cadman CNC voltage: 400 Vweight of the machine ca.: 8,3 tdimensions of the machine ca.: 3600 x 2300 x 2000 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Laser capacity 3kw Laser type fiber Band width from 10 to 130 mm. Number of axes 8
Qty. 1 Second-hand overhauled 4-Hi cold rolling mill Mfc.: SUECO (Member of IHI Group) Material of rolling Series 5000 & 6000 The rolling mill has been bought in 2023 and total overhauled. All revamped and painted of mill housing, coiler, gear box, roll chock, and backup rolls etc. Installed new electrical controls, hydraulic system, work rolls and other essential components. Please note that the new owner invested USD 2.1 Million in 2023. Strip width: 400 – 600 mm (650 mm) Thickness: 0.05 – 2.0 mm Rolling speed: 300 m/min. Gear type: 3.5:1 ID 508 mm OD 1500 mm Coil weight: 5000 kg Work roll dia.: 200 mm (200 – 180 mm) Length: 740 mm Back-up roll dia.: 650 mm (650 – 630 mm) Length: 720 mm Work roll drive Main mill drive power: 300 kW, 0-600/1800 RPM R/Tension reel power: 110 kW, 0-600/1800 RPM L/Tension reel power: 90 kW, 0-600/1800 RPM
1. Qty. 1 Second-hand 2-Hi reversing cold rolling mill – still in operation! Manufacturer: ACHENBACH Built: 1958 Moved to present location and revamped in 2021. All electrical cabinet with necessary component renewed in 2021. There is no PLC system. The machine controlled by Relay Control System. All bearings and some mechanical parts have been replaced. Status: Still in operation Material: Alu - Alloy 1XXX, 3XXX, 8XXX Strip Width: max. 750 mm Thickness: 0.1 mm ≈ 5.5 mm Main Motor: 380 kW, AC controlled by resistive cascade system Rolling Speed: 100 m/min Coil Weight: max. 2000 kg
Qty. 1 Second-hand slitter – still on foundation Mfc.: TBA Removed to new location: 2000 Stopped: 2022 Input coil characteristics: Strip thickness: 0.1 - 3.6 mm Cut strip width: max 600 mm Internal coil dia.: ø 290 - 650 mm Maxi. external coil dia.: 1100 mm Max. coil weight: 3000 kg Output coil characteristics: Internal coil dia.: ø 400 mm Number of strip cuts 7 times at thickness 3.5 mm Min. width of cut tape: 10 mm Tolerance of tape cutting width 0.2 mm
