Manufacturer:
The distance indication is not possible, because your location could not be determined. Prerequisite is that your browser allows cookies and location determination.

Manufacturer:
(Category: 107-593)

EHT 1
RAS 2
WMW 1
sheet metal working / Sheet Metal Bending Machines
date: 19.04.2024 add to watchlist
approved
dealer
item-No.: 157447569

new

check Seller: Bästlein Gebrauchtmaschinenhandel GmbH
Location: Werk Land-de

add to watchlist

sheet width: 2100 mmplate thickness: 6 mmpre-bending: 4 mmupper roll diameter: 160 mmlower roll diameter: 140 mmside roll diameter: 120 mmtotal power requirement: 2,2 kWAccessories / equipment:- Conical bending device- induction hardened rolls- digital display for side rollers- Machine made of steel construction- Separate control panel- two speeds- all rollers on ball bearings- Folding and support bearing from the top roller is actuated from the control panel.When the folding bearing is opened, the roller moves automatically upwards.- Conical adjustment of the rollers via control panel- Central rollers are via hydraulic motor and rotary reduction geardriven. (Top and bottom rollers)- CalibrationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet metal working / Sheet Metal Bending Machines
date: 19.04.2024 add to watchlist
approved
dealer
item-No.: 156326779

new

check Seller: Bästlein Gebrauchtmaschinenhandel GmbH
Location: Werk Land-de

add to watchlist

sheet width: 2100 mmplate thickness: 8 mmpre-bending: 6 mmupper roll diameter: 190 mmlower roll diameter: 170 mmside roll diameter: 150 mmtotal power requirement: 3 kWweight of the machine ca.: 3.450 kgMachine dimensions approx.: 4040x1380x1255 mmAccessories / equipment:- Conical bending device- induction hardened rolls- digital display for side rollers- Machine made of steel construction- Separate control panel- two speeds- all rollers on ball bearings- Folding and support bearing from the top roller is actuated from the control panel.When the folding bearing is opened, the roller moves automatically upwards.- Conical adjustment of the rollers via control panel- Central rollers are via hydraulic motor and rotary reduction geardriven. (Top and bottom rollers)- CalibrationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet metal working / Sheet Metal Bending Machines
date: 19.04.2024 add to watchlist
approved
dealer
item-No.: 156326581

used

check Seller: Bästlein Gebrauchtmaschinenhandel GmbH
Location: Werk Land-de

add to watchlist

sheet width: 2600 mmplate thickness: 10 mmpre-bending: 8 mmupper roll diameter: 230 mmlower roll diameter: 190 mmside roll diameter: 210 mmtotal power requirement: 7,5 kWweight of the machine ca.: 5.560 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet metal working / Sheet Metal Bending Machines
date: 19.04.2024 add to watchlist
approved
dealer
item-No.: 157447563

new

check Seller: Bästlein Gebrauchtmaschinenhandel GmbH
Location: Werk Land-de

add to watchlist

sheet width: 3100 mmplate thickness: 6 mmpre-bending: 4 mmupper roll diameter: 210 mmlower roll diameter: 190 mmside roll diameter: 170 mmtotal power requirement: 7,5 kWOverall size: 5200x1400x1300 mmmachine weight ab.: 5.400 kgAccessories / equipment:- Conical bending device- induction hardened rolls- digital display for side rollers- Machine made of steel construction- Separate control panel- two speeds- all rollers on ball bearings- Folding and support bearing from the top roller is actuated from the control panel.When the folding bearing is opened, the roller moves automatically upwards.- Conical adjustment of the rollers via control panel- Central rollers are via hydraulic motor and rotary reduction geardriven. (Top and bottom rollers)- CalibrationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet metal working / Sheet Metal Bending Machines
date: 19.04.2024 add to watchlist
approved
dealer
item-No.: 156326879

used

check Seller: Bästlein Gebrauchtmaschinenhandel GmbH
Location: Werk Land-de

add to watchlist

sheet width: 3100 mmplate thickness: 10 mmpre-bending: 8 mmupper roll diameter: 270 mmlower roll diameter: 250 mmside roll diameter: 210 mmtotal power requirement: 11 kWweight of the machine ca.: 7750 kgOverall size: 5600x1450x1600 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet metal working / Sheet Metal Bending Machines
date: 19.04.2024 add to watchlist
approved
dealer
item-No.: 159287027

new

check Seller: Bästlein Gebrauchtmaschinenhandel GmbH
Location: Günzburg Land-de

add to watchlist

sheet width: 3100 mmplate thickness: 16 mmpre-bending: 13 mmupper roll diameter: 330 mmlower roll diameter: 300 mmside roll diameter: 240 mmtotal power requirement: 11 kWOverall size: 5600x1650x1900 mmweight of the machine ca.: 10.600 kgAccessories / equipment:- Conical bending device- induction hardened rolls- digital display for side rollers- Machine made of steel construction- Separate control panel- two speeds- all rollers on ball bearings- Folding and support bearing from the top roller is actuated from the control panel.When the folding bearing is opened, the roller moves automatically upwards.- Conical adjustment of the rollers via control panel- Central rollers are via hydraulic motor and rotary reduction geardriven. (Top and bottom rollers)- CalibrationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet metal working / Sheet Metal Bending Machines
date: 19.04.2024 add to watchlist
approved
dealer
item-No.: 156326783

new

check Seller: Bästlein Gebrauchtmaschinenhandel GmbH
Location: Werk Land-de

add to watchlist

sheet width: 3100 mmplate thickness: 25 mmpre-bending: 20 mmupper roll diameter: 390 mmlower roll diameter: 360 mmside roll diameter: 300 mmtotal power requirement: 18,5 kWweight of the machine ca.: 17.100 kgMachine dimensions approx.: 5800x2100x2000 mmAccessories / equipment:- Conical bending device- induction hardened rolls- digital display for side rollers- Machine made of steel construction- Separate control panel- two speeds- all rollers on ball bearings- Folding and support bearing from the top roller is actuated from the control panel.When the folding bearing is opened, the roller moves automatically upwards.- Conical adjustment of the rollers via control panel- Central rollers are via hydraulic motor and rotary reduction geardriven. (Top and bottom rollers)- CalibrationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet metal working / Sheet Metal Bending Machines
date: 19.04.2024 add to watchlist
approved
dealer
item-No.: 156326644

new

check Seller: Bästlein Gebrauchtmaschinenhandel GmbH
Location: Werk Land-de

add to watchlist

sheet width: 4100 mmplate thickness: 35 mmpre-bending: 28 mmupper roll diameter: 540 mmlower roll diameter: 541 mmside roll diameter: 440 mmtotal power requirement: 37 kWweight of the machine ca.: 48.100 kgMachine dimensions approx.: 7670x3000x2930 mmAccessories / equipment:- Conical bending device- induction hardened rolls- digital display for side rollers- Machine made of steel construction- Separate control panel- two speeds- all rollers on ball bearings- Folding and support bearing from the top roller is actuated from the control panel.When the folding bearing is opened, the roller moves automatically upwards.- Conical adjustment of the rollers via control panel- Central rollers are via hydraulic motor and rotary reduction geardriven. (Top and bottom rollers)- CalibrationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet metal working / Sheet Metal Bending Machines
date: 19.04.2024 add to watchlist
approved
dealer
item-No.: 160095347

new

check Seller: Bästlein Gebrauchtmaschinenhandel GmbH
Location: Günzburg Land-de

add to watchlist

sheet width: 1050 mmplate thickness: 1,8 mmpre-bending: 1,5 upper roll diameter: 70 mmmin. dia.: 105 mmtotal power requirement: 1,1 kWweight of the machine ca.: 320 kgdimensions of the machine ca.: 1700x700x1100 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet metal working / Sheet Metal Bending Machines
date: 19.04.2024 add to watchlist
approved
dealer
item-No.: 156205351

new

check Seller: Knops Werkzeugmaschinen
Location: Türkei Land-de

add to watchlist

sheet width: 3100 mmplate thickness: 40 mmpre-bending: 32 diameter of upper rolls: 460 mmdiameter of lower rolls: 420 mmside roll diameter: 360 mmpower capacity: 30 kWmin. bending diameter: 1380 mmweight of the machine ca.: 30,1 tdimensions of the machine ca.: 6,3 x 2,3 x 2,6 m4 Rolls Hydraulic Bending MachineStandard Features:- hardened and polished rolls- complete body made of ST-52 steel- hydraulically opened/closed drop end controlled from control panel - digital readout for side rolls- top and bottom rolls are driven by hydraulic and gearbox. Bottom rolls vertical movements are hydraulic powered- separate control panel- oil cooler - conic bending- in accordance to CE-normOptional Accessories:- variable speed of rotation (5.325 Euro)- material feeding table (3.896 Euro)- center support (12.058 Euro)- 2 x side supports (11.258 Euro)The data for this ad was created with ModulMWS - the  ...

sheet metal working / Sheet Metal Bending Machines
date: 19.04.2024 add to watchlist
approved
dealer
item-No.: 155981446

new

check Seller: Knops Werkzeugmaschinen
Location: Türkei Land-de

add to watchlist

sheet width: 3100 mmplate thickness: 100 mmpre-bending: 86 diameter of upper rolls: 750 mmdiameter of lower rolls: 700 mmside roll diameter: 600 mmpower capacity: 132 kWmin. bending diameter: 825 / 2750 mmweight of the machine ca.: 80 tdimensions of the machine ca.: 8,0 x 3,1 x 4,1 m4 Rolls Hydraulic Bending MachineStandard Features:- hardened and polished rolls- complete body made of ST-52 steel- hydraulic powered cover for easy material extracting- 2-axis digital readout for side rolls- top and bottom rolls are driven by hydraulic and gearbox. Bottom rolls vertical movements are hydraulic powered- separate control panel- oil cooler - conic bending- in accordance to CE-normOptional Accessories:- variable speed of rotation (9.261 Euro)- material feeding table 1000 x 2000 (4.608 Euro)- center support (25.459 Euro)- 2 x side supports (15.796 Euro)The data for this ad was created with Modul ...

sheet metal working / Sheet Metal Bending Machines
date: 19.04.2024 add to watchlist
approved
dealer
item-No.: 163367302
New in: 2010

used

check Seller: Bästlein Gebrauchtmaschinenhandel GmbH
Location: Standort Land-de

add to watchlist

sheet width: 2050 mmplate thickness: 4 mmpre-bending: 3,5 mmroll diameter: 150 mmengine output: 2,2 kWmachine weight ab.: 1.550 kgdimensions: 3300 x 1100 x 1000 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet metal working / Sheet Metal Bending Machines
date: 07.03.2024 add to watchlist
item-No.: 163526760
New in: 2018

used

Seller: Maschinenhandel Nord
Location: 17034 Neubrandenburg Land-de
Price: VB 44.900 € add to watchlist

Key data: 3100 mm, 2 mm, 10 mm

Swivel bending machine Cidan Type: K25-30 YOC 2018 Top Condition At call The CIDAN K25-30 is a quick and easy-to-use bending bench consisting of a robust, fully welded steel construction with cast iron side frames. The K25 is designed for continuous operation under the most demanding conditions. With its dual drive, this machine covers a wide range of different applications in the manufacturing industry. Folding Length: 122" (3100mm) Folding Capacity Steel: 2.00 Folding capacity stainless steel: 1.20 Folding Capacity Aluminum: 3.00 Opening height – tension beam: 135 mm Motor – tension beam: 1.5 kW Motor – folding beam: 1.5 kW Dimensions: 4190 mm x 1600 mm x 1700 mm Weight: 3.685 kg The machine can be viewed and tested at any time.

sheet metal working / Sheet Metal Bending Machines
date: 04.03.2024 add to watchlist
approved
dealer
item-No.: 163504460
New in: 1997

used

check Seller: tuerer machinery brokers & consulting
Location: 61352 Bad Homburg Land-de

add to watchlist

Key data: 3550 mm

Ref.-No.00804 Description Hydraulic Press Brake Tools included Manufacturer: EHT Type EHT VarioPress 320 Year of construction 1997 1997 Pressure infinitely adjustable: 3200 kN 320 tons max. working width: 3550 mm 3550mm Working width between uprights: 3050 mm Stand projection: 350 mm Table height: 900 mm Plunger stroke: 270 mm Plunger bevel adjustment: 15 mm With crowning device and quick-clamping device for upper tools Lifting speed: empty 100 mm/s, under load: 10 mm/s, retraction: 100 mm/s Control: DNC 80 PC ( DNC 84 PS= 4 axes

sheet metal working / Sheet Metal Bending Machines
date: 19.04.2024 add to watchlist
approved
dealer
item-No.: 163452329
New in: 1992

used

Location: Land-de

add to watchlist

sheet width: 2050 mmplate thickness: 6,00 mmpre-bending: band thickness stainless steel: 4,00 mmtotal power requirement: kWweight of the machine ca.: 8,00 tdimensions of the machine ca.: 3,85 x 1,10 x 1,25 m• Mobile control panel• Top roller 185 mm• Lower roller 170 mm• Conical bending deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet metal working / Sheet Metal Bending Machines
date: 19.04.2024 add to watchlist
approved
dealer
item-No.: 163665468

used

check Seller: Bästlein Gebrauchtmaschinenhandel GmbH
Location: Günzburg

add to watchlist

sheet width: 3040 mmplate thickness: 6 mmvoltage: 380 Vvoltage: 220 Vfrequency: 50 Hzweight of the machine ca.: 5200 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet metal working / Sheet Metal Bending Machines
date: 12.03.2024 add to watchlist
approved
dealer
item-No.: 160256891
New in: 1997

used

check Seller: Evelin of America Corporation
Location: Land-vn

add to watchlist

4-roll plate bending machine Mod. VRM NG HY 3000x40 Country of manufacture: Switzerland YOM: 1997 Brand: HAEUSLER AG Roll diameter 560/540/400 mm Roll thickness 40mm Roll length 3000mm Motor motor Power:55kW System: Hydraulic Voltage: 380V/3 phase Weight 45 000kg The quality of the machine is still very good.

sheet metal working / Sheet Metal Bending Machines
date: 30.01.2024 add to watchlist
approved
dealer
item-No.: 161945123
New in: 1991

used

check Seller: tuerer machinery brokers & consulting
Location: Land-de

add to watchlist

Ref.nr. 00766 Description of the plant Used press brake Manufacturer: Hämmerle M+S Brugg AG Model AP 100 – 2100 Year of construction: 1991 Max. pressing force 1000KN Max working length 2100mm Max. stroke 400mm Projection 300mm Mass Weight 11500kg Operating voltage 380V 50Hz Control voltage 24V Total connection 23 KW Nominal current of the back-up fuse 63 A

sheet metal working / Sheet Metal Bending Machines
date: 19.04.2024 add to watchlist
approved
dealer
item-No.: 163176515
New in: 2001

used

Location: Land-de

add to watchlist

sheet width: 4000 mmplate thickness: 40,00 mmpre-bending: total power requirement: kWweight of the machine ca.: 78 tdimensions of the machine ca.: mAdjustable rollers 3The rollers are adjusted hydraulicallyTop roller diameter 710 mmBottom roller diameter 640 mmSide roller diameter 520 mmWorking speed 2+4 m/min (up to 8m/min)Additional equipmentElectronic synchronizationAir-cooled oil coolerUpper support deviceLateral cylinder support device (10t)Infeed table (20t)hydr. Bladder storageCone bending deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet metal working / Sheet Metal Bending Machines
date: 19.04.2024 add to watchlist
approved
dealer
item-No.: 162866841

new

check Seller: WMT GmbH & Co. KG
Location: Deutschland Land-de

add to watchlist

sheet width: 1570 mmplate thickness: 10 mmpre-bending: 8 total power requirement: 7 kWweight of the machine ca.: 4,5 tdimensions of the machine ca.: 3,5 x 1,5 x 1,55 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet metal working / Sheet Metal Bending Machines
date: 19.04.2024 add to watchlist
approved
dealer
item-No.: 163680458

used

check Seller: Bästlein Gebrauchtmaschinenhandel GmbH
Location: Standort

add to watchlist

sheet width: 2040 mmplate thickness: 1,5 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet metal working / Sheet Metal Bending Machines
date: 19.04.2024 add to watchlist
approved
dealer
item-No.: 163623141

used

check Seller: Bästlein Gebrauchtmaschinenhandel GmbH
Location: Standort

add to watchlist

sheet width: 2500 mmplate thickness: 2 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet metal working / Sheet Metal Bending Machines
date: 19.04.2024 add to watchlist
approved
dealer
item-No.: 163332696

used

check Seller: Bästlein Gebrauchtmaschinenhandel GmbH
Location: Günzburg Land-de

add to watchlist

sheet width: 1050 mmplate thickness: 3,3 mmpre-bending: 3 volt: 400 Vfrequency: 50 Hz0: 90 mmmin. dia.: 130 mmtotal power requirement: 1,1 kWweight of the machine ca.: 490 kgdimensions of the machine ca.: 1650x1200x700 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet metal working / Sheet Metal Bending Machines
date: 19.04.2024 add to watchlist
approved
dealer
item-No.: 163414658

new

check Seller: Bästlein Gebrauchtmaschinenhandel GmbH
Location: Günzburg Land-de

add to watchlist

sheet width: 1256 mmplate thickness: 3 mmpre-bending: 2,5 frequency: 50 Hzvolt: 400 V0: 90 mmmin. dia.: 130 mmtotal power requirement: 1.1 kWweight of the machine ca.: 545 kgdimensions of the machine ca.: 1.1 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet metal working / Sheet Metal Bending Machines
date: 19.04.2024 add to watchlist
approved
dealer
item-No.: 163332697

new

check Seller: Bästlein Gebrauchtmaschinenhandel GmbH
Location: Günzburg Land-de

add to watchlist

sheet width: 2050 mmplate thickness: 4.5 mmpre-bending: 4.0 volt: 400 Vfrequency range: 50 Hzmin. dia.: 210 mm0: 140 mmtotal power requirement: 2.2 kWweight of the machine ca.: 1565 kgdimensions of the machine ca.: 3240x1200x900 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet metal working / Sheet Metal Bending Machines
date: 26.10.2023 add to watchlist
approved
dealer
item-No.: 160815514
New in: 2006

used

Location: Land-nl

add to watchlist

Working length: 2050 mm Round bending: 5 mm Bending: 4 mm Top roller: Ø 150 mm Under-roll: Ø 225 mm Equipped with: - Profile iron bending device - Sentences Profielrollen -Operating instructions Motor power: 3 kW Machine LxWxH: 3300 x 1050 x 700 mm Machine weight: 2000 kg

sheet metal working / Sheet Metal Bending Machines
date: 17.01.2023 add to watchlist
approved
dealer
item-No.: 159467311
New in: 2007

used

check Seller: TDMW.PL Igor Kaliniec
Location: Land-pl

add to watchlist

Salvagnini P4 Year of manuf. 2007 Configuration: HPT201516 MZR Machine consists of: 1. Automatic plates feeder 2. Automatic bending unit 3. Automatic bend products receiver Max sheet thickness: mild steel 410 N/mm2: min. 0,5mm - max 2mm stainless steel 600 N/m2: min. 0,5mm - max 1,25mm aluminium 265 N/mm2: min. 0,5mm - max. 3mm Min and maximum dimensions of sheet material: L min./max.: 405 / 2000 mm W min./max.: 190 / 1524 mm max diameter 2150 mm centring dim. 2000mm Machine including bending tools

sheet metal working / Sheet Metal Bending Machines
date: 19.04.2024 add to watchlist
approved
dealer
item-No.: 158353474
New in: 1987

used

check Seller: ATMH werkzeugmaschinen-Handel GmbH
Location: Ennepetal Land-de

add to watchlist

pressure: / tstroke: / mmtable-size: / mmweight of the machine ca.: 65000 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet metal working / Sheet Metal Bending Machines
date: 26.10.2023 add to watchlist
approved
dealer
item-No.: 160810020

used

Location: Land-nl

add to watchlist

Projection: 880 mm Wheels: Ø 60 x 160 mm Toproll adjustment: 300 mm Machine LxWxH: 1300 x 700 x 1800 mm Machine weight: 300 kg

sheet metal working / Sheet Metal Bending Machines
date: 15.04.2024 add to watchlist
approved
dealer
item-No.: 137942059
New in: 1970

used

checkTOP Seller: ZOMA Maschinenhandel
Location: 04838 Eilenburg, Walther-Rathenau-Str. 2 Land-de

add to watchlist

Three-roll sheet bending machine, used three-rollers -plate -bending m/c, used Type: UBBD 2.5 x 2000 Manufacturer / make: WMW Built/ new: 1970 Working range: sheet width max. / max. working length: 2000 mm Sheet thickness range / sheet thickn.: max. 2.7 mm Bending rollers / bending rollers: top: 1 piece , bottom: 2 pieces Driven / driven: 2 sub-rollers/ bottom rollers Upper roller diameter / diameter of top roller: 112 mm Bending speed. / speed bending: 7m /min Minimum bending radius / min. bending radius: 130 mm Weight / weight: 700 kg Connection value / loaded power: 4 kW

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
Banner ad information