sheet metal working used for sale (3,277)

FALCON S4020 6 kW fiber laser was built in 2025 in China by FFG CHINA CO., LTD. The machine was launched in March 2026 and has been in operation for a small number of hours. It is covered by a valid warranty until February 2031. This fibre laser belongs to the FALCON S Masterline series, developed for users seeking high performance while keeping operating costs low. The machine is designed for the precise cutting of large sheets of metal with a maximum thickness of 30 mm. Cutting is performed using a fiber optic beam generated by a high-performance ULTRON 6 kW laser source. The narrow focal spot, combined with high energy density, ensures precise material machining with minimal thermal deformation. The fibre laser technology also offers greater energy efficiency and performance compared with other cutting methods. The FALCON S4020 features a BOCHU 3D cutting head with a range of us ...

CIDAN QLA-PROFI slitting and cut-to-length line is designed for the efficient machining of sheet metal fed from a coil. It enables the slitting of material with a maximum thickness of 3 mm into strips of a specified width, as well as cut-to-length into sheets with a maximum length of 1550 mm. The combination of both cutting methods in one process enables the efficient preparation of the material for subsequent machining stages while maintaining high dimensional accuracy and repeatability. The CIDAN QLA-PROFI 1550/1,5 coil slitting line consists of machines built between 2008 and 2011, which were combined into one complete system in 2023. It includes: – 5t sheet metal decoiler – CIDAN QLA-PROFI cutting unit with straightening and feeding rolls, circular knives for slitting and a guillotine for cut-to-length – SPX-20/130-2C hydraulic table – sheet metal recoiler – scrap r ...

MTP HSH-6x3200 hydraulic guillotine shears were built in 2016 in Poland by Metal Technics Polska s.c. The machine is designed for the precise cutting of sheet metal with a maximum length of 3200 mm and a thickness of 6 mm. The cutting process is performed by cutting knives with high wear resistance, which provide accurate, repeatable results even during intensive operation. The work table is fitted with built-in balls to facilitate the positioning of the material in the working area. The MTP HSH-6x3200 also features an ESTUN E21S CNC controller with an intuitive interface and many functions designed to facilitate machine operation. All this is complemented by a robust design which, combined with a 9 kW motor, ensures reliable operation of the machine in demanding industrial conditions. The HSH 6x3200 guillotine shears weigh 7200 kg. Technical specifications of the MTP HSH-6x3200 guill ...

This 5-axis TRUMPF TruLaser Cell 7040 was manufactured in 2008. It features a powerful 6 kW fiber laser and a spacious table with dimensions of 3900 x 1500 mm. The machine is equipped with advanced Siemens 840D control for precision cutting. If you are looking to get high-quality laser cutting capabilities, consider the TRUMPF TruLaser Cell 7040 machine we have for sale. Contact us for further details.

Press brake manufactured in 2007. This Gade PS-C 3120 features a pressing force of 120 tons and a bending length of 3,000 mm. If you are looking to get high-quality bending capabilities, consider the Gade PS-C 3120 machine we have for sale. Contact us for further details.

Hydraulic shearing machine manufactured in 2008. This GASPARINI CO/2004 features a maximum cutting thickness of 6 mm for mild steel and 4 mm for stainless steel, along with a maximum cutting length of 2,000 mm. If you are looking to get high-quality shearing capabilities, consider the GASPARINI CO/2004 machine we have for sale. Contact us for further details.

5 AXIS FIBER LASER 3000w Fiber 3000 x 1300 x 600mm

3000 x 1500mm Brush Tables Automatic loading / unloading Night Train Genius 4000 w fiber

This 3-axis EXPERT SYSTEMTECHNIK cutExpert variojet was manufactured in 2016. It features a maximum material thickness capacity of 100 mm, allowing for versatile cutting applications. The machine includes an Uhde HPS 4022 high-pressure pump, designed for a discharge capacity of 2.3 l/min and a pressure of 4000 bar, enhancing its cutting efficiency. If you are looking to get high-quality waterjet cutting capabilities, consider the EXPERT SYSTEMTECHNIK cutExpert variojet machine we have for sale. Contact us for further details.

Plasma cutting machine manufactured in 2007. This MicroStep SPLR-P features a Kjellberg HiFocus 160i PLUS plasma power source, offering a cutting current range of 10A to 160A. It includes an integrated CNC operator terminal for precise control and a filtration system by Donaldson Torit DCE. If you are looking to get high-quality plasma cutting capabilities, consider the MicroStep SPLR-P machine we have for sale. Contact us for further details.

Eckold Kraftformer; motorised machine for Shrinking, Stretching, Doming, Planishing, Reforming, Flattening, StraighteningMachine equipped for tooling:FWR1307FWA 1306FWA 802TFWA 1002TLFA 120SLFA155T

: 1 Bending tools with excellent value for moneyInduction hardened, with ground working surfacesStandard lengths: 835 mm, 415 mm and 835 mm (split).For tool clamping systems such as: Amada, Promecam, Euro, Durma, Baykal, Ermaksan, Dener, Trumpf, Wila and many moreThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2025 mmplate thickness: 3.0 mmdistance between columns: 2050 mmno. of strokes: 38 Hub/mincutting angle: 1.38 ° Control: konv. total power requirement: 4.0 kWweight of the machine ca.: 1100 kgdimensions of the machine ca.: 2299 x 2000 x 1130 mm Current new price: approx. 20.000 euros From a maintenance workshop Special price available upon request Features:- Robust / high-performance electromechanical sheet metal shear- Manual material backgauge Infinitely variable adjustment range Adjustment from the rear - via handwheel Includes mm scale - 1x side stop - 3x front support arms- 1x freely movable foot switch- rear sheet metal chute- front sheet metal removal for smaller workpieces- digital piece counter - control cabinet - mounted on the front left The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Beyeler, CP 4100x10, Cutting length : 4100mm, Max. sheet thickness 10mm,

Key data: 135 t, 3050 mm

Manufacturer: DURMA Model No.: AD-R 30135 Year: 2021 Condition: Used Stock number: 9506 Compressive force: 135 t Maximum bending length: 3050 mm Axis: Y1/Y2 Machine height: 2975 mm Machine length: 4100 mm Machine width: 1900 mm Machine weight: 10500 kg

Manufacturer: PIERCE Model: RUR 2000 Year: 2016 Condition: Used Stock number: 9505 Work table length: 3000 mm Work table width: 1500 mm Maximum sheet thickness when cutting: 25 mm Plasma Source: Formica 130 Plasma can also be burned using the oxygen-fuel process up to a layer thickness of 100 mm. Equipment: Suction Kompresso Wrykrys Program

Manufacturer: Trumpf Model: TruMatic 5000 R Year: 2002 Condition: Used Stock number: 9502 Compressive force: 22 t Maximum length of sheet metal plate: 2500 mm Maximum blade width: 1250 mm Maximum sheet metal plate weight: 200 kg Machine weight: 17500 kg Equipment: Tools Refurbished tool grinder

Manufacturer: ADIGE Model No.: LT652 Year: 2001 Condition: Used Stock number: 9501 Laser ON: 68426 h Beam ON: 18365 h Laser power: 2.5 kW Tube diameter: 12-140 mm Source: Rofin Sinar DC025 In 2013, a general overhaul was carried out directly at the manufacturer's premises. Equipment: Suction Cooling system Automatic loader (6.5 m) Unloader (3.5 m) Belt unloader for short parts 2 bezels

This TRUMPF TruPunch 3000 CNC punching machine was manufactured in 2013. It features a working area of 2500 mm x 1250 mm and a maximum punching force of 180 kN. The machine is equipped with 18 tool stations and offers a maximum punching rate of 1000 strokes/min. If you are looking to get high-quality punching capabilities, consider the TRUMPF TruPunch 3000 machine we have for sale. Contact us for further details.

Slitting line Stainless Steel Strip width.. 500 mm Belt thickness... .02-3.0 mm Coil weight. 5 to. Speed 150 m/min. Minimum belt width.. 13 mm Strip number 10 Coil I Dia. 400 / 500 mm Shaft diameter.. 145 mm Control... Siemens S 5 Facility consists of: -Coil car -Uncoiler + Snubber roll - Pieler table -Paper Wrapper -Edge controll system -Pinch roll -Scrap shear - PVC coating unit -Side guide 2+2 rolls -Slitting head -Roll table -Scrap winder -Tension unit -Recoiler, separator shaft -Paper wrapper -Turnstile 2 arms -Electrical & Automation system -Camera system

Strip width... 650 mm Band thickness 0.2-3.0 mm Coil weight.. 5 tons. Coil I Diam. . 400/500/600 mm Coil A Dia. 1,500 mm Yield strength... 700 N/mm2 Strip width.. 10 - 250 mm Speed 150 m/min. Working direction.. right/ left Facility consists of: -Decoiler -Belt removal wedge -Scissor breasts 2 pcs. -Scrap wrapper -Band brake -Brake rollers 2 pcs. -Reel -Separation arm -2 control panels -Electrical control cabinets -Central hydraulics -Tools Plant dismantled in workshop

used Herburger roll forming machine, infinitely variable adjustment via Quickset system from sheet width 280 – 840 mm, : latest technology, hardened and with Drive elements in the rollers (rubber inserts) Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out. Sheet width 280 - 840 mm Sheet thickness steel 0.8 mm Sheet thickness aluminium 1.0 mm Sheet thickness stainless steel 0.6 mm Machine weight 290 kg Dimensions 1100 x 1100 x 950 mm Total power requirement 230 V Colour: grey/anthracite Profile height 25 mm Machine number A 24 15 34

Used complete line for crown cork clusures manufacturing. Including press PTC027/1996 year/ and lining machine PMC250/2001 year/. Liners profile 916. In 2015 original SACMI CVS system installed.

Key data: 2 mm

Slitting and cut-to-length line Sheet width. 1,500 mm Sheet thickness.. 0.4 - 4.0 mm Belch width 4 mm 700 mm Slitting 2.0 mm 4 pcs. Straightening rollers... 8 pcs. Coil weight 7,000 kg Facility consists of: - Bundle pallet truck -Decoiler -Loop control -Straightening machine -Strip scissors -Cross shears 1,500 x 4.0 mm - Electrical control. Line complete overhauled, new control, all defective parts replaced, part painted RA 60 11

Longitudinal cut-to-length line Strip width 1,500 mm Band thickness. 0.5 - 3.0 mm Number of cuts . 5 pcs. Straightening rollers. 7 pcs. Coil weight.. 7,000 kg Rewinder ... 7,000 kg Facility consists of: -Pressing arm -Unwinder -Belt removal wedge - Straightening machine -Strip scissors -Cross shears -Band brake -Reel -Control panel -Electrical control

Lg.Nr. 21275 Hand Folding Machine Technical data: - Max. working width 1030 mm - Max. material thickness 2 mm - Bending angle approx. 0 - 135 ° - lockable with end stop - Upper beam is operated with side hand crank - Max. stroke upper beam 120 mm - Max. adjustment bending beam 45 mm - Bending process is supported by eccentric weight - Space requirement approx. W 1750 x H 1120 x D 450 mm - Weight approx. 620 kg

Slitting and cut-to-length line Strip width... 1,500 mm Strip thickness 0.5 - 2.0 mm Cutting number... 7 strips Straightening rollers 8 pcs. Coil weight.. 7,000 kg Rewinder .. 7,000 kg

4-roll 2000x6 mm plate bending machine Davi model MAX2017 year 2004 used plate roll in working condition, Planetary dual pre-pinch Performance Capacity: Plate width 2000 mm plate thickness 6 mm pre-bend 5 mm minimum rolling diameter ID 350 mm rollers length 2050 mm Upper roll 165 mm Pinch roll 155 mm Side rolls 120 mm Power electric motor 3 kw on hydraulic unit Vac 400/50 mm Installed configuration Rollers surface hardened high strength Conical plate rolling, cone bending Hydraulic commands via leverage distributors Infinitely variable speed control Digital position readout --- Hydraulic driven motorized the central rolls Pre-pinch pressure adjustable for pre-bend Drop-end front open to unload closed shells Re-rolling system for calibration of welded shell Safety and emergency stop machine dimension 3400x1150xH 1100 mm -weight 220 ...

: neu : ca. 4 Wochen ab Auftragse : Italien : 10900 €: 209.28 €: 60 mm: 595 mm: 363 mm: 900 mm: 130 kg: 10.5 cm³: 60 x 3 mm: 2Gas x 3,91 mm: 60 x 4 mm: 60 x 2 mm: 60 x 4 mm: 60 x 4 mm: 64 x 4 mm: 64 x 4 mm: 60 x 4 mm: 50 x 4 mm: 35 mm: 60x30x4 stehend, 60x40x5 mm: 300 mm: 10 mm: 10 mm: 1,25 / 2,50 U/min: 1.5 kWdigital read out for bending anglemanual clampingmaterial spring back compensationdigital read out and zero setting for clamping point2 speedsoverload protectionmobile by rolls and handletools not includedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 8 Wochen ab Auftragse : Italien : 12460 €: 239.23 €: 60 mm: 500 mm: 760 mm: 1000 mm: 186 kg: 10 cm³: 60 x 4 mm: 2 x 3,91 mm: 60 x 4 mm: 60 x 2 mm: 60 x 3 mm: 60 x 6 mm: 64 x 6 mm: 64 x 6 mm: 63 x 4 mm: 50 x 4 mm: 35 mm: 35 x 35 mm: 60 x 20 stehend, 60 x 35 mm: 380 mm: 10 mm: 10 mm: 1,5 / 3 U/min: 1.5 kWquick-change tooling systemdigital display of bending anglematerial spring back compensationfoot pedal for hands-free operationaccurate counterbending die positioningusers manualtools not included, priced on requestThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.