subcategories
(3rd category level)
Manufacturer:
(Category: 107)
: neu : ca. 10 Wochen ab Auftrags : Türkei : 5500 €: 106.15 €: 2.5 mm: 160 mm: 250 nm: 4 Stk.: 96 mm: 13 1/min: 1475 mm: 550 mm: 1200 mm: 320 kgreduction motor with brake systemmovement of rolls with foot pedaladjustable idle rollsteel shafts with bronze bushings4 set of rollscomplete with standuser manual in GERMAN or ENGLISHaccording to CE rulesALTERNATIVE (PRICE ON REQUEST):HIBKS 2,5 with hydraulic upper roll feedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Container rotator, boiler rotator, welding rotator, welding rotator, welding device, welding turntable, welding rotator -Manufacturer: Deuma Heitze, Container rotating device, Welding rotating device type H 02.5 -Load capacity: kg -Roller spacing: 600 - 1670 mm -Rollers: Ø 320 x 950 mm -Rolling speed: 0.15 to 1.35 m/min Right/Left rotation -Control unit: with manual control -Individual components: see photos -Transport dimensions: 1150/1105/H550 mm / 1100/600/H550 mm -Weight: 607 kg / 365 kg
sheet width: 4050 mmplate thickness: 10 mmweight of the machine ca.: 18 tdistance between columns: mmtotal power requirement: kWdimensions of the machine ca.: mDelem DAC-362 NC-controlprogrammable limit stopautomatic cutting crack adjustmentautomatic cutting angle adjustmentThe machine has only 800 working hoursTechnische Daten / technical details:Schnittlänge / max. cutting length 4050 mmSchnittleistung / cutting capacity 10 mmAusladung / overhang 210 mmHinteranschlag / limit stop 1000 mmAntriebsleistung Motor/ drive capacity motor 15 kWGewicht der Maschine ca. / weight 18000 kgTechnische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -Technical data, accessories and description of the machine are not binding.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 3050 mmplate thickness: 13.0 mmthickness at Niro-steel: 8.0 mmcutting angle: 0.5 - 2.5 °no. of strokes: 8 - 25 Hub/minback stop - adjustable: max. 1.000 mmControl: SIEMENS Number of downholders: 13 Stk.oil volume: 300 ltr.engine output: 21.0 kWweight: 8700 kg.range L-W-H: 3950 x 2200 x 1900 mmFeatures:- Robust electro-hydraulic sheet metal shear Design: Circuit-guided- NC electro-motorized backgauge with SIEMENS NC control unit OP 7 Input of target and actual position values- NC electro-hydraulic cutting angle adjustment- Manual cutting gap adjustment, from the front via handwheel- Recessed grips in the front support table- Front finger guard- 1x long side fence- 1x long support arm- 1x freely movable foot switch- Original operating instructions (NL) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
working width: 1350 mmworkpiece width - max.: 160 mmweight of the machine ca.: 4000 kgIncluded:- Wet vacuum attachment- Replacement brushes- User manualThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: gebraucht : WA0007 : 217 €: 1 : 835 mmmint conditionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
This 3-axis AMADA LC-2415αIII was manufactured in 2000. It features a laser power of 2 kW and a maximum sheet format of 1,500 x 5,000 mm. The machine has been regularly maintained by Amada Switzerland and includes a newly installed turbo-blower in 2024. If you are looking to get high-quality laser cutting capabilities, consider the AMADA LC-2415αIII CO2 laser cutting machine we have for sale. Contact us for further details.
This 3-axis GILARDI EFESTO 3.6 was manufactured in 2022. It features a working area of 3,000 × 1,500 mm and a powerful 6 kW laser source for efficient cutting. If you are looking to get high-quality fiber laser cutting capabilities, consider the GILARDI EFESTO 3.6 machine we have for sale. Contact us for further details.
Key data: 80 t, 2600 mm
Inv. Num. : 9319 Type: CNC HAP 2680 Producer: Ermak Created: 2006 Parameters: Control system: CYBELEC Compressive force: 80 t Maximum bending length: 2600 mm Machine height: 2750 mm Machine length: 3750 mm Machine width: 1950 mm Machine weight: 6000 kg
Trumpf TruLaser 3040Year of manuf. : 2021 Movement X/Y/Z : 4000/2000/116 mmPower : 4 kW____________Description:Standard equipmentWorking area:4000 × 2000 mmControl cabinets:IntegratedDrive technology:Gantry combined with linear direct drivesWaste removal:Longitudinal conveyor beltPositioning laser diode:IncludedSpray system:IncludedAutomatic nozzle cleaning:IncludedFeatures:- NitroLine:- AdjustLine:- ControlLine:- FlyLine:- FocusLine:- FastLine:- PierceLine:- Brass cutting set:- Copper cutting setLaser TruDisk 4001:- Power 4 kW:- BrightLine Fiber:- High-Speed Cutting Package:- Power Package for Fusion CuttingAdditional machine functions:- Drop&Cut:- Integrated camera 1 for process monitoringAdditional cutting packages:- High-speed Eco cutting package:- Pneumatic cuttingTechnical specificationsSimultaneous operation:170 m/minAverage positioning deviation (Ps):0.03 mmPositioning dev ...
: 1 Bending tools with excellent value for moneyInduction hardened, with ground working surfacesStandard lengths: 835 mm, 415 mm and 835 mm (split).For tool clamping systems such as: Amada, Promecam, Euro, Durma, Baykal, Ermaksan, Dener and many moreThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting range for steel to: 25 mmworking range: 3000 x 1500 mm: 120 mmmachine weight ab.: 900 kgOverall size: 3560x1960x1000 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 12 Wochen ab Auftrags : Türkei : 10800 €: 207.36 €: 35 mm: 137 mm: 137 mm: 3 : 1.1 kW: 7 m/min: 35x8 mm / 300 mm : 50x12 mm / 400 mm : 18x18 mm / 250 mm : Ø 22 mm / 200 mm : Ø 40x1,5 mm / 500 mm : 30x15x2,5 mm / 500 mm : 25x25x2 mm / 450 mm : 35x35x5 mm / 400 mm : 30x30x4 mm / 550 mm : 1050 mm: 500 mm: 1250 mm: 350 kg3 mech. driven rolls (brake motor)hardened and ground shaftslower rolls hydraulic adjustablehorizontal and vertical operationstandard set of rollsfoot pedal forfor- and backward drive2 digital readoutscontrol panelmachine and equipment accordingto the CE regulationsuser manual in GERMAN and ENGLISHWE HAVE MORE THAN 210 REFERENCES!The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Plate rolling machine manufactured in 2000. This FASTI 136-20-4.5 features a capacity of 2040 x 4.5 mm at 400 N/mm² tensile strength and weighs 2110 kg. It is equipped with a Fasti-Matik 5 R control unit and operates at 400 V. If you are looking to get high-quality plate rolling capabilities, consider the FASTI 136-20-4.5 machine we have for sale. Contact us for further details.
Offer 25475 Man. Double unwinding & uncoiling reel Technical data: - Coil weight left + right up to approx. 1 t - Coil width up to approx. 300 mm - Coil inner diameter of approx. 380 to 500 mm - Coil outer diameter up to approx. 1250 mm - Mandrel height approx. 750 mm - Space requirement approx. W 1250 x D 900 x H 1300 mm - Weight approx. 200 kg
Combined hole punching, profile steel shears, notching machine, sheet metal cutting machine Manufacturer: Peddinghaus Type Peddimaster 60/100 Cuts: Round steel 45 mm Square steel 40 mm Angle steel 120 x 13 mm Flat steel 500 x 12 mm Projection 510 mm Cutting area 500 x 12 or 400 x 16 mm Punching diameter 27 in 17 mm Punching diameter 39 in 12 mm Machine weight approx. 2,400kg
A Haeusler CNC large-format 4-roll plate bending machine is available. Number of rolls: 4, Roll width: 3050mm, Max. prebending plate width: 3000mm, Max. prebending plate thickness: 60mm, Max. rolling capacity at max. plate width and 3500mm bending diameter: 70mm, Roll diameter top/bottom/side: 620mm/600mm/500mm, Max. top roll load: 12000kN, Operating speed: 4m/min, Connected load: 132kW, Weight: approx. 85t. Including cone bending device. Documentation available. An on-site inspection is possible.
Offered is a RAS guillotine shear. Cutting length: 4040mm, max. steel sheet thickness: 5mm, backgauge range: approx. 5mm-1000mm, cutting angle: approx. 1.0°, stroke rate: approx. 28-46strokes/min, control system: RAS System 2005, weight: approx. 9200kg. Inspection by appointment possible.
CONTROLS conventional DECOILER sheet width max.: 1050 mm coil weight max.: 5 toLEVELLER UNIT sheet width max.: 1000 mm sheet thickness max.: 5 mm sheet thickness min.: 0.4 mmSTRIP-FEEDER feeder type: roll feeder SCHLEICHER H-5 coil unwinder, max. load 5 t, power 3.92 kW, strip width 1,050 mm, with lifting table;SCHLEICHER RM8-70 EW 160 straightening machine, year of manufacture 1979, 38,712 operating hours, power 7.62 kW, strip width 1,000 mm, strip thickness 0.4 - 5 mm, 4 straightening rollers each on top and bottom,SCHLEICHER feeder
Stroke: 15 mmpressure: 3 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
plate thickness: 6 mmblade length: 200 mmangle adjustable from - to: fest 90 Gradtable surface area: 750 x 500 mmpressure: ttotal power requirement: 3,0 kWweight of the machine ca.: 0,62 tdimensions: 1,2 x 0,8 x 1,2 mCombination machine: edging and notching- foot switch- Emergency stop switch- DocumentationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
punching pressure: 60.0 tpunching cross-cut in cmm: 31 in 15 mmsquare edge steel: 40.0 mmL-beam: 160 x 80 mmflat steel: 400 x 16 mmthroat: 400 mmround bar steel: 40.0 mmtotal power requirement: 5.5 kWweight of the machine ca.: 1.950 kgdimensions of the machine ca.: 1700 x 1050 x 1980 mm good / well-maintained condition () Features:- Stop / support table at the punching station- Support table at the notching station - Flat steel blade, 375 mm long, with four cutting edges, - also for cutting angle iron at 45°- Material support table with stop bar on the flat steel shears- Section steel blade for cutting 90° angle steel as well as round and square steel- Scraper, swiveling- Square notching device with stop table- 2 foot switches and electrical controls- Connector for external engagement- Integrated hydraulic power unit- Three-phase motor, 400 volts, 50 Hz- Various insert tools such as ...
sheet width: 1550 mmplate thickness: 4.5 mmpre-bending: 4.0 mmroll length: 1550 mmmin. dia.: ca. 190 mmroll diam. toproll: 140 mmbending speed: 3.0 m/minengine output: 2.2 kWweight: 1420 kgrange L-W-H: 2700 x 750 x 1000 mmEquipment:- robust electro-mechanical round bending machine- 2x central rollers driven by electric motor (upper & lower roller)- upper roller can be swiveled out manually, with folding bearing- including conical bending device- freely movable control panel- lower roller can be adjusted manually, using a handwheel- asymmetrical roller arrangement- self-braking main motor- safety device (safety line with switch unit)- CE mark/declaration of conformitySpecial equipment included in the price:- hardened rollers- motorized side roller adjustment- digital position display for motorized adjustable side rollerThe data for this ad was created with ModulMWS - the software solution ...
: neu : ca. 4 Wochen ab Auftragse : Italien : 9340 €: 180.26 €: 48 mm: 570 mm: 410 mm: 1000 mm: 110 kg: 6 cm³: 48 x 3,5 mm: 11/2 x 3.68 mm: 54 x 1,5 mm: 50 x 4 mm: 48 x 2 mm: 48 x 2 mm: 60 x 3 mm: 64 x 2 mm: 64 x 2 mm: 60 x 2 mm: 50 x 4 mm: 32 mm: 45 x 16 stehend, 45 x 25 mm: 300 mm: 10 mm: 10 mm: 2/3 U/min: 1.5 kW3 phasedigital display of bendmaterial spring back compensationquick-change tooling system2 hexagonal tool holdersaccurate counterbending die positioningportable with base wheelsfootswitchusers manualALTERNATIVELY ALSO AVAILABLE AS FOLOWING MODEL (PRICE ON REQUEST):SB 48M (single phase, 2 r/min) Model with TCPlus control on requestMACHINE-KIT WITH TOOLS (PRICES ON REQUEST):Art.Nr.maschinetuberadiusSB 48M K2DSB 48MGas inch2 x ØSB 48T K2DSB 48TGas inch 2 x Øtools:Ø 1/2", (21,3 mm), R46Ø 3/4", (26,9 mm), R56Ø 1", (33,7 mm), R67Ø 1", 1/4 (42,25 mm), R90 ...
: neu : ca. 6 Monate ab Auftragse : Taiwan : 42100 €: 804.11 €: 2035 mm: 3.5 mm: Hydraulisch : 135 °: 3000 mm: 1100 mm: 1750 mm: 2450 kghydraulic drivenNC control for bending anglemanual back gauge 600 mmsharp rail 45° (in one piece)front angle beam 75 mmmechanical stop adjustment of upper beamclamping force adjustment of upper beamaccording to CE rules(sample photo)ALTERNATIVELY:versionAMH-K,withSECTIONEDsharp rail 45° OPTION:2 axes NC control with 7", touchscreen incl. motorized back gauge 800 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Punching Laser Machine Trumpf TruMatic 7000 Year of construction 2010 Rexroth IndraMotion MTX Controller Laser type: TruFlow 4000 Laser power: 4000 W Working Area:: Punching operation without repositioning: X 3,050 mm Punching operation: Y 1,550 mm Laser operation: X 3,050 mm Laser operation: Y 1,550 mm Combined operation: X 2,500 mm Combined operation: Y 1,550 mm Sheet thickness: max. 8 mm Workpiece weight: max. 280 kg Punching force: 220 kN X-axis speed: max. 100 m/min. Y-axis speed: max. 60 m/min. Simultaneous speed: max. 116 m/min. Maximum stroke rate:: Punching (E = 1 mm): max. 1,200 1/min. High Light: max. 3,000 1/min. Tools:: MultiTool tool change time: 0.3 sec. Number of tools/clamps: 21 /4 pieces Parts removal:: Workpiece size at the part removal flap (punching operation): 500 x 500 mm Workpiece size at the part rem ...
Key data: 220 kN, 8 mm, 3050 mm
Punching Laser Machine Trumpf TruMatic 7000 Year of construction 2010 Rexroth IndraMotion MTX Controller Laser type: TruFlow 4000 Laser power: 4000 W Working Area:: Punching operation without repositioning: X 3,050 mm Punching operation: Y 1,550 mm Laser operation: X 3,050 mm Laser operation: Y 1,550 mm Combined operation: X 2,500 mm Combined operation: Y 1,550 mm Sheet thickness: max. 8 mm Workpiece weight: max. 280 kg Punching force: 220 kN X-axis speed: max. 100 m/min. Y-axis speed: max. 60 m/min. Simultaneous speed: max. 116 m/min. Maximum stroke rate:: Punching (E = 1 mm): max. 1,200 1/min. High Light: max. 3,000 1/min. Tools:: MultiTool tool change time: 0.3 sec. Number of tools/clamps: 21 /4 pieces Parts removal:: Workpiece size at the part removal flap (punching operation): 500 x 500 mm Workpiece size at the part rem ...
Punching Laser Machine Trumpf TruMatic 7000 Year of construction 2010 Rexroth IndraMotion MTX Controller Laser type: TruFlow 4000 Laser power: 4000 W Working Area:: Punching operation without repositioning: X 3,050 mm Punching operation: Y 1,550 mm Laser operation: X 3,050 mm Laser operation: Y 1,550 mm Combined operation: X 2,500 mm Combined operation: Y 1,550 mm Sheet thickness: max. 8 mm Workpiece weight: max. 280 kg Punching force: 220 kN X-axis speed: max. 100 m/min. Y-axis speed: max. 60 m/min. Simultaneous speed: max. 116 m/min. Maximum stroke rate:: Punching (E = 1 mm): max. 1,200 1/min. High Light: max. 3,000 1/min. Tools:: MultiTool tool change time: 0.3 sec. Number of tools/clamps: 21 /4 pieces Parts removal:: Workpiece size at the part removal flap (punching operation): 500 x 500 mm Workpiece size at the part rem ...
Punching Laser Machine Trumpf TruMatic 7000 Year of construction 2010 Rexroth IndraMotion MTX Controller Laser type: TruFlow 4000 Laser power: 4000 W Working Area:: Punching operation without repositioning: X 3,050 mm Punching operation: Y 1,550 mm Laser operation: X 3,050 mm Laser operation: Y 1,550 mm Combined operation: X 2,500 mm Combined operation: Y 1,550 mm Sheet thickness: max. 8 mm Workpiece weight: max. 280 kg Punching force: 220 kN X-axis speed: max. 100 m/min. Y-axis speed: max. 60 m/min. Simultaneous speed: max. 116 m/min. Maximum stroke rate:: Punching (E = 1 mm): max. 1,200 1/min. High Light: max. 3,000 1/min. Tools:: MultiTool tool change time: 0.3 sec. Number of tools/clamps: 21 /4 pieces Parts removal:: Workpiece size at the part removal flap (punching operation): 500 x 500 mm Workpiece size at the part rem ...
Offer 26172 Technical data: - Brush diameter approx. 250 mm - Brush width up to approx. 55 mm - 2 Disc speed - Drive 400 V - Working height approx. 850 mm - Space requirement approx. W 650 x H 1300 x D 500 mm - Weight approx. 85 kg
