sheet metal working used for sale (3,277)

: neu : ca. 8 Wochen ab Auftragse : Spanien : 25700 €: 490.87 €: 80 to: 500 mm: 5 : 40/14 bzw. 24/24 mm: 70 mm: 40 1/min: 450x15 / 300x20 mm: 130x130x13 mm: 45 mm: 12x52x90 mm: 9 kW: 2310 mm: 1200 mm: 2050 mm: 2400 kg2 foot pedals for independent work at 2 stationshydr. driveflat bar shearangle bar shear with minimum deformation by diagonal moving of the bladeround and square bar shearrectangular notching unitpunching unit up to diam. 40 mmfast hydraulic, centring deviceoilfillingtable at the punching station with gaugetable at the notching unit with gaugetable at the flat bar shearuser manual in GERMAN and ENGLISHOPTION:Kit € 970,00length stop 1000 mm with contact switch, for angle, flat or bar stationmagnetic machine lamp10 set round punches and dies: 8, 10, 12, 14, 16, 18, 20, 22, 24 and 26 mmThe data for this ad was created with ModulMWS - the software solution of LogoTec ...

: neu : ca. 6 Monate ab Auftragse : Taiwan : 52800 €: 997.92 €: 4010 mm: 2 mm: Hydraulisch : 135 °: 5600 mm: 1750 mm: 2050 mm: 4600 kghydraulic drivenNC control for bending anglemanual back gauge 600 mmsharp rail 45° (in one piece)front angle beam 75 mmmechanical stop adjustment of upper beamclamping force adjustment of upper beamaccording to CE rulesALTERNATIVELY:versionAMH-K,withSECTIONEDsharp rail 45° OPTION:2 axes NC control Schneider7", touchscreen incl. motorized back gauge 800 mm (sample photos)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 28 t, 1000 mm

Hydr. CNC Press Brake BOSCHERT Type Profi 28 CNC with various bending tools Weight approx. 3000 kg

Key data: 3200 mm, 1 mm

with motor depth stop 1000 mm, with CNC graphic touch control POS2000 on the swivel arm, with offset bending beam Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Working length: 3200 mm Sheet thickness steel: 1.5 mm Sheet thickness aluminum: 2.0 mm Sheet thickness front: 1.0 mm Max. back gauge: 1000 mm Colour: blue/grey Dimensions: 4450 x 2000 x 1850 mm Machine weight: 2700 kg Upper beam stroke: 150 mm without roller scissors Opening width: 150 mm Bending angle (max.): 160 degrees Machine number: 8500110

Pipe winding machine with compression device, pipe winding machine, for metallic pipes, ventilation construction, Duct Winding Machine -Pipe winding machine: Manufacturer HAFLEX Type HSW 992 A -Band thickness: 0.05-0.12 mm -Pipe diameter: Ø 50 - Ø 650 mm -Number of tools: 14 pieces, see pictures -Transport dimensions: 3.3 loading meters -Weight: 570 kg

electromechanical sheet metal shears brand RAS type 83.20. Year of manufacture 1994.Cutting length 2040mm up to 3mm thickness Digital measurement of the rear stop 790mm. Sheet metal holder along the entire length - repair (adjustment) required.Rear pneumatic supports.Power 5.5 KW weight 2050kg.

: neu : 2026 : 090180 : Februar 2026, Zwischenver : Türkei : 8300 €: 160.19 €: 50 mm: 152 mm: 162 mm: 3 : 1.1 kW: 4,5 m/min: 60x10 mm / 600 mm, 20x10 : 100x15 mm / 600 mm, 50 x : 35x35 mm / 600 mm, 15x15 : 35 mm / 600 mm, Dm. 20 mm : 70x2 mm / 1200 mm, Dm. 25 : 70x30x3 mm / 1500 mm, 30x : 50x50x3 mm / 1600 mm, 20x : 50x50x6 mm / 600 mm, 30x3 : 50x50x6 mm / 900 mm, 30x3 : 810 mm: 950 mm: 1500 mm: 500 kg3 mech. driven rolls (brake motor)hardened shafts top roll hydraulic adjustablehardened universal rollslateral rolls adjustable in 1 axishorizontal and vertical operationdouble foot pedal forfor- and backward drivemachine and equipment accordingto the CE regulationsuser manual in GERMAN and ENGLISHWE HAVE MORE THAN 210 REFERENCES!The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 8940 Type: AD-R 60220 Producer: Durma Created: 2021 Parameters: Hours: 6762 h Number of bends: 390253 Compressive force: 220 t Maximum bending length: 6050 mm Maximum ram stroke: 265 mm Machine height: 3250 mm Machine length: 7100 mm Machine width: 2360 mm Machine weight: 21760 kg Equipment: Basic equipment toolbox

Max. bending length: 3240 mm Max. sheet thickness: 2 mm steel Manual and automatic bending process possible Bending angle adjustable via potentiometer Lifting height of the upper beam and material thickness can be preselected via dip switch Bending rail and machine in top condition Weight: approx. 3000 kg

DURMA TP9 turret punch press was built in 2007 in Turkey by DURMAZLAR MAKİNA SANAYİ ve TİCARET A.Ş. The machine, distinguished by its high efficiency, is an excellent choice for precision machining of sheet metal with a maximum thickness of 6 mm. The machining process is performed fully automatically by means of a reliable work head operating with a maximum force of 20 tonnes. A 27-station turret cooperates with the head, capable of storing a large number of tools of all sizes and types. The material feed, on the other hand, is carried out on a large brush table, which prevents scratches and scrapes on the workpiece surface and significantly reduces noise levels. The table is also equipped with clamps, responsible for holding the material securely during machining. All this is complemented by an advanced SIEMENS CNC controller with many useful functions. The DURMA TP9 CNC punching ma ...

YAWEI NISSHINBO HPI 3048 turret punch press was built in 2011 in China by Jiangsu Yawei Machine Tool Co., Ltd. The machine is designed for precision machining of sheet metal with a maximum thickness of 6.35 mm. The machining process is carried out using a reliable work head, operating with a maximum force of 30 tonnes. The material feed, on the other hand, is carried out on a large brush table, which prevents scratches and nicks on the workpiece surface and significantly reduces noise levels. This is complemented by an intelligent SIEMENS CNC control with many useful functions. The HPI-3048-36LA2 CNC punching machine weighs 18000 kg. Technical specifications of the YAWEI NISSHINBO HPI 3048 turret punching machine - CNC control: SIEMENS SINUMERIK 802D - number of axes: 5 (X,Y,T,C,Z) - maximum punching force: 30 t - maximum sheet metal thickness: 6.35 mm - maximum sheet metal dimen ...

ECKERT Opal WaterJet CNC waterjet cutting machine was built in 2019 in Poland by ECKERT AS Sp. z o.o. The machine is designed for precision machining of a wide range of materials, i.e. metal, stone, wood and plastics. Workpieces with a maximum thickness of 150 mm are machined by means of a reliable cutting head with anti-collision and tool height sensor. During cutting, only water is used, making the process free of harmful fumes and safe for the environment. The ECKERT Opal WaterJet is distinguished by its robust water table with a double WEMA grating system. The design made of closed steel profiles ensures high stability during even the most intensive challenges. All travel components, in turn, are protected by bellows covers. This solution guarantees uninterrupted operation of the machine for many years of use. The ECKERT WaterJet is operated via a state-of-the-art industrial co ...

sheet width: 1650 mmplate thickness: 3 mmcutting thickness max.: 3 mmcutting length: 1650 mmvoltage: 380 Vweight of the machine ca.: 0,5 tdimensions of the machine ca.: LBH 2,6 x 1,6 x 1,3 mWell-maintained pneumatic/mechanical guillotine shearwith foot switchThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3240 mmplate thickness: 2,00 mmdistance between columns: mmtotal power requirement: kWweight of the machine ca.: 3,00 tdimensions of the machine ca.: mManual and automatic bending operation possibleBending angle adjustable via potentiometerUpper beam stroke height and material thickness selectable via DIP switchesBending rail and machine in excellent conditionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3050 mmplate thickness: 6 mmrear stop: 10-1000 mmcutting angle: 0,5 - 2,5 °down holder: 20 Stkno. of strokes: 14 - 23 Hub/minwork height max.: 900 mmoil volume: 140 ltotal power requirement: 11 kWdimensions of the machine ca.: 4000 x 2150 x 1900 mmweight: 7800 kgEquipment:- ELGO control unit type P50- Automatic cutting angle adjustment- Automatic cutting gap adjustment- electric back gauge- Pneumatic sheet holding device- Light barrier behind the machine- 4 support arms- front finger guard- foot switch- Angle stop 0 - 180- Operating instructionsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Deutschland : 1.25 mm: 2 mm: 1.25 - 1.5 mm: 5 : 5 : 1130 mm: 180 mm: 915 mm: 2,2 kW: 5550 mm: 6200 mm: 1435 mm: 1460 mmstandard controladditional rail on the bending beam2x foot pedalremoveable material supportsafety equipment accoring to the control rules BG GermanyStands and tension arms are made of high quality ductile cast iron eliminating any possibility of cracking, breaking, twisting, warping or other distortions.3 year warranty on stands and tension arms.Quality Made in Germany.Further models on request.SeriesBM from3 up to12 meter lengthe and max. thicknessfrom1 up to1,5 mm steel.OPTIONAL EQUIPMENT: manual rotary shear price on request Powered rotary shear St/Al 1,25/1,5 mm price on request Powered rotary shear with cutting head ",S", St/Al 1,5/2,0 mm price on requestCONTROLBM 10 7-inch display, presetting of up to 10 different angles ...

round bar steel: 34 mmsquare edge steel: 30 x 30 mmL-beam: 100 x 10 mmflat steel: 100 x 14...160 x 11 mmblade length: 175 mmT-beam: 100 x 10 mmnotching: l + T material: 10 mmhole punhing press: pressure: 45 tthroat: 305 mmtotal power requirement: 3 kWweight of the machine ca.: 1,2 tdimensions of the machine ca.: 1,4 x 0,8 x 1,5 m 5-fold combinated profile steel shear incl. flat steel shear profile steel shear bar steel shear notcher hole punch 2 foot switches contact limit stop various punching saddles The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

older Gebr. Lever shears on base frame Technical data Knife length 500 mm Cutting range approx. 3-4 mm Dimensions 800 x 170 x 1300 mm dto. incl. base frame 1300 x 600 x 1780 mm Remarks / Accessories: Underframe, small damage to the knife Maschinenladen Oeben GmbH Krahnendonk 116 D-41066 Mönchengladbach Phone: + 49 2161 662701 maschinenladen.de InfoMachine Shop

Offer 26046 Technical data: - 2 mot. Driven rollers - Manual. Lining of the upper roller - Shaft diameter 30 mm - Shaft rotation 6 rpm - Roller diameter 88 - 108 mm - Bending capacity approx. - Flat steel 50 x 8 mm - Square 20 mm - Round tube 42 mm - Drive 380 V / 0.55 kW - with: - Right / left – run - Tube roller set approx. 16 mm - Weight approx. 150 kg - Space requirement approx. W 650 x H 1300 x D 950 mm

Details: - Sheet width: 6020 mm - Sheet thickness: 6 mm - Back gauge (adjustable): max. 1000 mm - Stroke rate: 5 - 10 stroke/min. - Control: SC 100 T - Engine power: 11.0 kW - Machine weight: approx. 27,000 kg - Machine dimensions: 7650 x 2400 x 2885 mm

The machine is in good technical condition, testing possible after prior agreement. Force (kN) 250 Bending length (mm) 1200 Distance between verticals (mm) 1250 Stroke (mm) 200 Entry without tools (mm) 440 Throat (mm) 120 Consumption (kVA) 9.4 Approach speed (mm/s) 120 Working speed (mm/s) 10 Return speed (mm/s) 150 Stroke - X axis of the back gauge (mm) 625 Speed - X axis of the back gauge (mm/s) 600 Stroke - R axis of the back gauge (mm) 200 Speed - R axis of the back gauge (mm/s) 200 Standard dimensions (L x W x H) (mm) 2200 x 1600 x 2320 Weight (kg) 3450

: neu : ca. 12 Wochen ab Auftrags : Türkei : 25200 €: 481.32 €: 1050 mm: 2.5 mm: 2.5 mm: 2 mm: 90 mm: 4,5 m/min: 2.2 kW: 2250 mm: 1000 mm: 1500 mm: 900 kgFOR ROUND AND ELEPTIC SHAPES FOR MASS PRODUCTION (CYCLE UP TO ONLY 20 SEC POSSIBLE)4 rollsNC control with touchscreenTop roll driven by hydromotor and plantary gearboxHydraulic drop endMobile control panelHardened rollsOperating manual in English or GermanOPTION:Feeding table price on requestThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 10800 €: 207.36 €: 35 mm: 137 mm: 137 mm: 3 : 1.1 kW: 7 m/min: 35x8 mm / 300 mm : 50x12 mm / 400 mm : 18x18 mm / 250 mm : Ø 22 mm / 200 mm : Ø 40x1,5 mm / 500 mm : 30x15x2,5 mm / 500 mm : 25x25x2 mm / 450 mm : 35x35x5 mm / 400 mm : 30x30x4 mm / 550 mm : 1050 mm: 500 mm: 1250 mm: 350 kg3 mech. driven rolls (brake motor)hardened and ground shaftslower rolls hydraulic adjustablehorizontal and vertical operationstandard set of rollsfoot pedal forfor- and backward drive2 digital readoutscontrol panelmachine and equipment accordingto the CE regulationsuser manual in GERMAN and ENGLISHWE HAVE MORE THAN 210 REFERENCES!The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 8 Wochen ab Auftragse : Spanien : 22400 €: 430.08 €: 1 : 60 to: 250 mm: 5 : 40 x 11 mm: 32 1/min: 350 x 15 mm: 120 x 10 mm: 45 / 40 mm: 10 mm: max. 150x10 mm: 5.5 kW: 1850 mm: 1300 mm: 2100 mm: 1390 kgwith bending station5 working stationsflat steel shear with device to reduce deformationangle iron shear with round- and squarebars openingtriangle notcherpunching stationpress brake device for flat steeltable at flat steel stationtable at notching stationlength stop 1000 mm with contact switch, for angle, flat or bar stationhydraulic drive2 foot releaseuser manual in GERMAN and ENGLISHWE HAVE MORE THAN 700 REFERENCES!The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Italien : 74000 €: 1398.6 €: 1350 mm: 0,5 - 170 mm: 1370 x 2200 mm: 4000 m³/h: 200 mm: 6 bar: 78 (+/-2) dB: 1750 mm: 2100 mm: 2180 mm: 2000 kgWITH 2 WORKING STATIONS: 1 X GRINDING BELT UND 1 X BRUSH UNIT ON TOPMachine made of stress-free welded steel construction for stable and rigid structure.Work table with motorised height adjustment via 4 synchronised spindles.Independent drive motors for each work group.Bonnets for extraction inside the machine, one per station.Touch screen for-Automatic star-delta connection of the main motors- Analogue ammeter for each group- Digital display for sheet thickness with decimal point tolerance- Material thickness adjustment (+/- 0.1 mm)- Machine condition monitoring with alarm messagesFEEDING SYSTEMRobust steel structure, wear-resistant surface.Vacuum conveyor belt on requestVariable feed speed via frequency co ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 35000 €: 668.5 €: 2550 mm: 1.5 mm: 1 mm: 2 mm: Motorisch : 155 °: 110 mm: 3800 mm: 2100 mm: 1650 mm: 2500 kg: 750 mm: 300 mm/s: 0.1 +/- mm: 0-20 mm: 100 °/sek: 90 mm/sCNC CONTROL WITH TABULAR PROGRAMMING- 15,6", touchscreen controller on swivel arm- tabular programming by entering the axes values- open or drop hemming function- multi radius bending function as by pressing or by bending- programming of material quality, thickness, spring back, bending correction and creating a data base for every type of material, thickness and length- piece counter- autorisiation with password- 128GB HDD allows almost unlimited data storage- remote service connection via WLAN- detailled alarm, tool and paramter pageBACK GAUGE 750 MM with servo drive, pull back sliders to create space for down flanges at the back of the bottom tool, ball castersupper ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 63900 €: 1207.71 €: 4200 mm: 1.5 mm: 1 mm: 2 mm: Motorisch : 5450 mm: 2200 mm: 1900 mm: 5350 kg: 1000 mmCNC control with tabular programming- 15,6", touchscreen controller on swivel arm- tabular programming by entering the axes values- open or drop hemming function- multi radius bending function as by pressing or by bending- programming of material quality, thickness, spring back, bending correction and creating a data base for every type of material, thickness and length- piece counter- autorisiation with password- 128GB HDD allows almost unlimited data storage- remote service connection via WLAN- detailled alarm, tool and paramter pageMotorized drive (servo motors) of the upper and bending beam (Z and Y axes)Motorized back stop (X axis) with servo drive, 1000 mm, rectangular configuration,with ball rollers in the sheet metal inserts ...

sheet width: 2540 mmplate thickness: 2,50 mmdistance between columns: mmtotal power requirement: kWweight of the machine ca.: 1,70 tdimensions of the machine ca.: mManual and automatic bending modes availableBending angle adjustment via potentiometerBending rail groundThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 135 tchamfer lenght: 3100 mmdistance between columns: 2600 mmcolumn arm: 410 mmram stroke speed: 180 mm/secwork speed: 10.0 mm/secreturn speed: 135 mm/secwork stroke: 275 mmdayligth: 550 mmtable height: 900 mmtable width: 90.0 mmcontrol: ModEva 12S oil volume: 200 ltr.voltage: 400 Volttotal power requirement: 11.0 kWweight: 8800 kgrange L-W-H: 4250 x 2150 x 2800 mm current new price approx. 80.000 euros special price on request- in checked conditions - machinevideo - https://www.youtube.com/watch?v=ALo1SpWfnTk--------------------------- ------------------------------SPEED BEND electro-hydraulic press brake with : increased installation height increased cylinder stroke increased throat depth---------------------------------------------------------Equipmen t:- CNC electro-hydraulic press brake- CYBELEC ModEva 12S CNC control unit High-resolution screen Clear, concise menus in the ...

plate thickness: 6.5 mmthickness at Niro-steel: 5.0 mmangle adjustable from - to: 30 - 140 Gradno. of strokes: ca. 50 Hub/mintable:: 950 x 1030 mmblade length: 220 x 220 mmtotal power requirement: 4.0 kWweight: 800 kgrange L-W-H: 1100 x 950 x 1280 mm current new price approx. 20.000 euros good condition () special price on requestEquipment:- electro-hydraulic notching machine- multi-function machine with 2x work stations 1x notching, 1x unit for radius rounding including radius punching tools- manual angle adjustment 30 - 140 degrees 2x handwheels for angle adjustment- large / stable work table- 2x new angle stop, adjustable- automatic cutting gap adjustment- 1x freely movable foot switch- connection cable + 16A plug- cutting performance: 6.5 mm to 60° ST 5.0 mm to 60° VA 4.0 mm to 30° ST 3.0 mm to 30° VAThe data for this ad was created with ModulMWS - the software solution of LogoTe ...