sheet metal working used for sale (3,307)

Hydraulic press for climping hydraulic pipes, equipped with all the necessary dies for pipes from 0.5 to 50 mm, never used 0 hours and packed in a wooden crate Overall dimensions: 1000 x 1000 x 1400 mm Weight: 310 kg Auction-ID: A7-45834-228

Punch holder, die holder, notching tool, punching tool, punch, mounting pin, clamping pin, eccentric press, hydraulic press -Manufacturer: Fibro, mounting pin, clamping pin for punching tool, press tool -Type: 211 12.50.030 -Hole: Ø 50 mm / Thread M30 -Number: 3x cones available -Price: €45 per piece / complete set -Dimensions: Ø 50 x 98 mm -Weight: 1.2 kg

Punch holder, die holder, notching tool, punching tool, punch, mounting pin, clamping pin, eccentric press, hydraulic press -Mounting pin: Clamping pin for punching tool press tool -Hole: Ø 50 mm / Thread M24 -Quantity: 1x cone available -Dimensions: Ø 50 x 109 mm -Weight: 1.2 kg

: R10-R260 bending speed: 2,5 U/min: 54,0 x 2 mmSheet thickness aluminum: 54,0 x 2 mm: 42,4 x 3 mmsheet thickness for stainless steel: 42,4 x 2 mm: 30 mm: einphasig - 230 Vdrive motor: 1,5 kWweight of the machine ca.: 80 kgdimensions of the machine ca.: 363 x 900 x 595 mm‘ERCOLINA MEDI BENDER’Single-phase mandrel-less bending machine up to 42 mmFeatures:- Control system: Soft-touch control panel in 8 different languages- Number of programs: 30, each with 9 bends- Standard accessories (including foot switch, user manual)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 29200 €: 557.72 €: 3200 mm: 2 mm: 1.2 mm: 3650 mm: 1700 mm: 1300 mm: 3100 kgNC-controlled backgauge 750 mmELGO P40T touchscreenRear light barrier protectionFront finger guard coverExtendable front support bracketCutting line illuminationEquipment compliant with CE directivesOperating instructions in German or EnglishOPTIONS: Sheet support, front or rear unloading € 1.900,00 Sheet support, front andrear unloading(NC controlled) € 2.840,00 (gauging length decreases approx. 200 mm) 1000 mm servo-backgauge € 900,00 Side gauge extension to 2 m € 410,00 Sheet metal carriage with rollers (capacity 1,000 kg) € 1.040,00 Angle stop € 460,00The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : WA0147 : 890 €: 1 : 3050 mm: 105 mm: 85 mm(screwed 5x from above)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydraulic press for climping hydraulic pipes, equipped with all the necessary dies for 0 pipes. 5 to 50 mm, never used 0 hours, packed in wooden crate Overall dimensions: 1000 x 1000 x 1400 mm Weight: 310 kg Auction-ID: A7-45833-26

: neu : ca. 10 Wochen ab Auftrags : Türkei : 60600 €: 1145.34 €: 3100 mm: 10 mm: 10 mm: 8 mm: 8 mm: 6 mm: 260 mm: 260 mm: 200 mm: 1,5 / 6 m/min: 7.5 kW: 5350 mm: 1600 mm: 1550 mm: 7685 kg4 rollsTop rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan systemPinch roll and latereal rolls move with hydraulic cylindersDigital read-out for lower and side rolls positionHardened rollsConical bending deviceHydraulic load relieving of upper rollHydraulic drop-end bearing2 working speedsProtectionagainst overloadMoveable control paneAccording to CE rulesOPTIONAL EQUIPMENT:Infinitely adustable speed of rollsHydraulic side supportHydraulic top supportNC controlIMPORTANT ISSUES AT CONICAL BENDING:The max. sheet metal thickness isequivalent to 50 % of nominal capacityThe cone length can be max. 30 % oremust be more than 60 % of roll lengthHardened rolls are reco ...

Hydraulic press for climping hydraulic pipes, equipped with all the necessary dies for pipes from 0.5 to 50 mm, never used 0 hours and packed in a wooden crate Overall dimensions: 1000 x 1000 x 1400 mm Weight: 310 kg Auction-ID: A7-45833-228

: neu : ca. 10 Wochen ab Auftrags : Türkei : 13800 €: 264.96 €: 1550 mm: 4 mm: 140 mm: 3,5 m/min: 2.2 kW: 2700 mm: 750 mm: 1000 mm: 1420 kg3 rollsasymmetric rolls - prebending2 rolls driven by brakemotormanual Back Rollforward tiltable upper rollforward and reverse revsconical bending by tilt of backrollmovable control panelusers manual in ENGLISH or GERMANOPTIONS:hardened Rolls Motorised Back Roll (Power Rear Roll) Digital Read-OutThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 8 Wochen ab Auftragse : Spanien : 7570 €: 146.1 €: 50 to: 130 mm: 13/27 mm: 23 1/min: 3 kW: 1100 mm: 900 mm: 1550 mm: 355 kgportable, hydraulic punching machinetable with gaugefoot pedaluser manual in German or EnglishThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2024 : 7314 : prompt, Zwischenverkauf v : Türkei : 14800 €: 284.16 €: 1 : 2500 kg: 1300 mm: 450 mm: 550 mm: 600 mm: 80 mm: 1600 mm: 1550 mm: 2000 mm: 580 kgmotorized drivemechanical adjustable coil mandrel with 4 jawsspeed control for decoiling speed aswell as acceleration- and deceleration timesphotoelectric proximity ensor SICK for sag controlPneumatic downholderThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 62600 €: 1183.14 €: 2050 mm: 13 mm: 10 mm: 13 mm: 10 mm: 10 mm: 8 mm: 240 mm: 240 mm: 190 mm: 820 mm: 11 kW: 3830 mm: 1160 mm: 1200 mm: 5000 kg4 rollsfully hydraulic drive of upper and lower roll (from 30 mm bending capacity all four rolls) by planetary gear boxhydr. side rolls positioning with electronical synchronisationhydr. lower roll feed with mechanical synchronisationadjustable pinching pressurevariable rolling speedhardened rollsconical bending devicehydraulic drop-end bearingmoveable control paneloverload protectionuser manual in GERMAN or ENGLISHaccording to CE rulesOPTIONAL:NC controlupper and lateral supportsIMPORTANT ISSUES AT CONICAL BENDING:the max. sheet metal thickness isequivalent to 50 % of nominal capacityThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 8-axis AMADA HFBO 5020 press brake was manufactured in 1998. It features a bending length of 2090 mm and a press capacity of 500 kN. The machine includes a stroke of approximately 200 mm and an open height of around 480 mm. If you are looking to get high-quality bending capabilities, consider the AMADA HFBO 5020 press brake we have for sale. Contact us for further details.

This 3-axis HGTECH Marvel 6000-3015 fiber laser cutting machine was manufactured in 2022. It features a working area of 3000 x 1500 mm and a powerful 6000 W laser source for efficient cutting. The machine is equipped with a Siemens SINUMERIK 840D SL CNC control and an automatic pallet changer for enhanced productivity. If you are looking to get high-quality cutting capabilities, consider the HGTECH Marvel 6000-3015 machine we have for sale. Contact us for further details.

This 5-axis TRUMPF TruBend 5170 was manufactured in 2016. It features a maximum press force of 1700 kN and a stroke length of 445 mm, making it suitable for various bending applications. The machine has a weight of 12,200 kg and operates at a maximum pressure of 300 bar. If you are looking to get high-quality bending capabilities, consider the TRUMPF TruBend 5170 press brake we have for sale. Contact us for further details.

Hydraulic shearing machine manufactured in 2003. This GASPARINI CO 3006 features a maximum cutting capacity of 6 – 8 mm and an installed power of 11 kW. Weighing 9.0 t, it operates at a minimum pneumatic pressure of 6 bar. If you are looking to get high-quality shearing capabilities, consider the GASPARINI CO 3006 machine we have for sale. Contact us for further details.

Key data: 2040 mm, 1 mm

with steel rollers for rounding, Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out. Working length: 2040 mm Sheet thickness steel: 1.0 mm Sheet thickness aluminium: 1.5 mm Sheet thickness front: 0.6 mm Colour: grey Dimensions: 2630 x 660 x 1155 mm Machine weight: 700 kg Upper beam stroke: 100 mm without cutting device for cutting to length Bending angle (max.): 145 degrees Machine number 9189

Inv. Num. : 9078 Type: LC 3015 F1 NT Producer: AMADA Generated: Parameters: Work table length: 3000 mm Work table width: 1500 mm Feed length X-axis: 3070 mm Y-axis feed length: 1550 mm Feed length Z-axis: 100 mm

LARA DEMAE-10000/100/1400-D feeder/unwinder/straightener – Year 2018. Reviewed, ready for production. Complete feeder from coil, integrating unwinding, straightening and servo-driven feeding in a single compact unit. Designed to work continuously on cutting, stamping or drawing lines, with high precision and reliability. Robust equipment, ideal for carbon steel, stainless steel and aluminum. Composed of: Motorized hydraulic winder, combined straightener-feeder and integrated electrical and hydraulic system. Main technical data: -Maximum strap width: 1,400 mm -Sheet thickness: up to 3 mm (carbon steel/aluminum) up to 1.5 mm (stainless steel) -Power supply: 400 V / 50 Hz -Hydraulic pressure: up to 130 bar

LARA SHEAR CDCH-1400 (year 2018) With a tow table. Hydraulic shear designed for the cross-cutting of strip and management of sheet metal surplus in coil feeding lines. It is supplied together with a feed table, allowing a comfortable and safe evacuation of the cut material and maintaining a clean and continuous production process. Robust equipment, of heavy industrial construction, especially suitable as auxiliary equipment in cutting, stamping or coil feeding lines. Work materials -Carbon steel -Stainless steel -Aluminum and light alloys Main technical data - Maximum working width: up to 1,400 mm -Drive type: hydraulic -Working pressure: 4–6 bar (pneumatic control system) -Power supply: 400 V / 50 Hz  

TIMAC TZZ-1604 circular disc shear/cutter with automatic double station stacker. Year 2018 Reviewed, ready for production. Automatic circular cutter for disc production from coil or strip, equipped with a double station automatic stacker that allows continuous work without stops. Especially suitable for the manufacture of bottoms and lids, circular pieces and blanks for drawing or stamping processes. Key features -Circular cutting using adjustable blades -Diameter adjustment system for different disc formats -Automatic double station stacker -Suction cup arm for collecting each disc -Possibility to remove entire stacks without stopping production -Doors with latches and safety interlocks -Integrated electrical and pneumatic system -Independent electrical panel -PLC control -Safety in accordance with CE regulations Main technical data -Sheet thickness: -Up to 3mm (car ...

Key data: 170 t

Trumpf Press Brake Trumabend V170, 1700KN, Stroke: 365,. L-530cm, W- 240cm, H-300cm, Weight: 18to,

: neu : ca. 4 Wochen ab Auftragse : Italien : 15330 €: 294.34 €: 22 to: 200 mm: 150 x 10 mm: 1100 x 630 mm: 120 mm: 55 mm: 4,6 - 8 mm/s: 70 mm/s: 45 l: 1.5 kW: 925 mm: 1200 mm: 900 mm: 1050 mm: 630 kg2 holder pins, height 110 mm (higher ones on request)Manual stop 500 mm with millimeter scaleAdjustable speed2 handwheels for adjusting the stroke and retraction pointPrecise hydraulic stroke adjustment, even under pressureTwo-hand operationHuge range of tools, prices on requestALTERNATIVE:Version with CNC controlThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Deutschland : 6400 mm: 1.75 mm: 2 mm: 6 : 1000 mmfully automatic bending in two ways without the need to rotate the sheethydraulic driveBMS MULTI-Touch with automatic depth stoppowered rotary shearadditional rail on the bending beammaterial support2x foot pedalsafety equipment accoring to the control rules BG Germany3 year warranty on stands and tension arms.Quality Made in Germany.FURTHER MODELS FROM3 UP TO12 M LENGTH AND FROM 1,25 MM UP TO 2,00 MM BENDING CAPACITY ON REQUEST.OPTIONS: Preserving material support made out of synthetics price on request Hydraulic radius adjustment (air gap adjustment)the bending capacitiy of aluminium rises up to 2,5mm price on request Extended depth 20 - 1.250 mm price on request Conical depth stop to bend conical profiles andnarrow/wide bendings for easy intermateing price on request Fully automatic gripper system wi ...

: gebraucht : WA0032 : 228 €: 1 : 835 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : WA0041 : 790 €: 1 : 835 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : WA0042 : 950 €: 1 : 835 mmmint conditionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 4-axis VOORTMAN VACAM VCS Thermo was manufactured in 2013. It features a working length of 3000 mm and a working width of 1500 mm, equipped with a Kjellberg HiFocus 280i plasma cutting unit capable of cutting up to 70 mm thickness. The machine offers a cutting speed range of approximately 0 – 5200 mm/min. If you are looking to get high-quality plasma cutting capabilities, consider the VOORTMAN VACAM VCS Thermo machine we have for sale. Contact us for further details.

This 3-axis Flow Kent Mach 2 C was manufactured in 2014. It features a working area of 3000 x 2000 mm and operates with a maximum pressure of 60,000 PSI. The machine is equipped with a powerful 75 kW pump and utilizes abrasive waterjet cutting technology. If you are looking to get high-quality cutting capabilities, consider the Flow Kent Mach 2 C CNC waterjet cutting system we have for sale. Contact us for further details.