subcategories
(3rd category level)
Manufacturer:
(Category: 107)
tube diameter: 48 mmbending radius max.: 90 °total power requirement: 1,5 kWweight of the machine ca.: 0,5 tdimensions of the machine ca.: 1,8 x 0,8 x 1,2 mElectro-hydraulic mandrel tube bending machine with- four-position bending angle pre-selection- bending tools: 48.3, 42.4, 33.7, 1/2- mandrel length: 4500 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Punching force: 500 kN Stroke: 32 mm Stroke adjustable: 10 - 32 mm Stroke rate: 35 /min Normal punching device: 31 Ø in 12 mm with punching table: 24 Ø in 16 mm with special punching device: 58 Ø in 7, 65 Ø in 6, 90 Ø in 4 and 130 Ø in 3 mm Hydraulic drive: 380 V, 4 kW Weight: 1400 kg Space requirement: 1200 x 1100 x 1680 mm The machine has only 303 operating hours!
Key data: 44 t, 1600 mm, 1530 mm
Electric Press Brake C15 - IRIS+ Angle Measuring System CoastOne - Made in Finland Year of manufacture: 2025 - Project machine Pressing force: 44T Bending Length: 1600mm Spindles: 2x22T Control: TC15-2D Graphics Light barrier: Lazersafe IRIS+ angle measuring system Back gauge: 5 axis controlled X-R-Z1-Z2-Dx axles Bending tool holder: Type manual WILA / TRUMPF / Type B Light working area front and rear Front support table - height adjustable Double foot pedal for opening and closing the Y-axis 1x set of bending tools incl. 36 months warranty after installation Delivery excl.; available immediately Viewing under power possible at any time by appointment!
Stock No.: 4051 TIN SHISS Manufacturer: DURMA, Type: SB 3006 Serial No.: 6076064556, Year of manufacture: 2006 Specifications: Size scissor length 3100 mm Size sheet thickness 6 mm Total power 15 kW Hydraulic. Programmatically controlled backgauge. 800 Dimensions: Length: 3100 mm, Height: 1950 mm, Width: 3850 mm, Weight: 6900 kg
Key data: 44 t, 1600 mm, 1530 mm
Electric Press Brake C15 - IRIS+ Angle Measuring System CoastOne - Made in Finland Year of manufacture: 2025 - Project machine Pressing force: 44T Bending Length: 1600mm Spindles: 2x22T Control: TC15-2D Graphics Light barrier: Lazersafe IRIS+ angle measuring system Back gauge: 5 axis controlled X-R-Z1-Z2-Dx axles Bending tool holder: Type manual WILA / TRUMPF / Type B Light working area front and rear Front support table - height adjustable Double foot pedal for opening and closing the Y-axis 1x set of bending tools incl. Ibjbmlszymb Seurhasb 36 months warranty after installation Delivery excl.; available immediately Viewing under power possible at any time by appointment!
CNC punching machine manufactured in 1995. This TRUMPF Trumatic 500 features a maximum punching force of 220 kN, accommodating workpieces up to 150 kg. It offers a working range of 2500 mm along the X-axis and 1250 mm along the Y-axis, allowing for efficient processing of various sheet sizes. If you are looking to get high-quality punching capabilities, consider the TRUMPF Trumatic 500 machine we have for sale. Contact us for further details regarding this machine.
This 6-axis ERMAKSAN Speed-Bend Pro 1270x60 was manufactured in 2021. It features a bending force of 60 t and a bending length of 1270 mm. The CNC-controlled backgauge includes X-axis travel of 500 mm and R-axis travel of 250 mm, ensuring precise operations. If you are looking to get high-quality bending capabilities, consider the ERMAKSAN Speed-Bend Pro 1270x60 press brake we have for sale. Contact us for further details.
Three-roll bending machine, three-roll sheet metal bending machine, bending machine, sheet metal bending machine, 3-roll bending machine, profile bending machine, three-roll sheet metal rolling machine, manual bending machine -Manufacturer: Carl Kneusel, 3-roll bending machine, hand-operated -Max. sheet width: 1020 mm -Max. sheet thickness: mm -Roller diameter: 55 mm -Dimensions: 1670/580/H1150 mm -Weight: 156 kg
3000 x 1500mm CG 4000w FIBER Night Train Genius Robot part stacking 20 station servo electric
Bystronic BySprint Fiber 4020 - Laser Cutting Machine - Bystronic ByVision CNC control - 15" TFT-LCD control panel - Operating hours: 25076 h - Cutting hours: 10728 h - Year of construction 2015 Technical data - Laser Source: Fiber Laser - Laser power: 6000 W - Working range: 4064 × 2024 × 70 mm - X-travel: approx. 4000 mm - Y-travel: approx. 2000 mm - Z-range: 70 mm - Maximum sheet thickness steel: 25 mm - Maximum sheet thickness stainless steel: 30 mm - Maximum sheet thickness aluminium: 30 mm - Maximum sheet thickness copper: 12 mm - Maximum sheet thickness brass: 12 mm - Electrical connected load: 22.7 kVA - Machine dimensions WxHxD: 13700 x 2565 x 6670 mm - Machine weight: approx. 15000 kg
Manufacturer: Spiro Model: Florett 3000 V3 Year: 2016 Condition: Used Stock Number: 9522 Work table length: 4000 mm Work table width: 2100 mm Table height: 1450 mm Dimensions of the sheet: 3000 x 1500 mm Maximum sheet thickness when cutting: 6 mm Plasma Source: Hypertherm Powermax 65
STIGAL VXstandard plasma-gas cutting machine was built in 2013 in Poland by STIGAL Marcin Stępień. The machine is used for the precise cutting of large-size sheet metal with a maximum length of 7 metres and a width of 2 metres. The use of both a gas and a plasma torch allows the cutting method to be adapted to current production requirements. The plasma arc is generated by a high-performance CEBORA PLASMA PROF 254 source, which minimises spatter during operation and reduces the need for additional machining of the finished parts. These features make the STIGAL VXstandard suitable for the production of precise steel components used across various industrial sectors. The machine features a stable, open design that provides free access to the work area from all sides. Outside the main work area is a attachment designed for tube machining. All process parameters are programmed using an ...
BAIWEI BW-G3015 1,5 kW fiber laser was built in 2019 in China by ZHENGZHOU BAIWEI CNC MACHINERY SHARES CO., LTD. The machine, designed for the precise cutting of sheet metal with a maximum thickness of 14 mm is ideal for both unit and series production. Cutting is performed using a stable fiber beam generated by a RAYCUS 1,5 kW laser source. The fiber laser technology offers greater energy efficiency and higher performance compared to other cutting methods. The BAIWEI BW-G3015 is equipped with a RAYTOOLS cutting head with a range of useful features. The autofocus automatically adjusts the focal position to the thickness of the material being machined. An anti-collision system detects obstacles, reducing the risk of the head colliding with the workpiece. These solutions enable efficient cutting while maintaining a high level of machining accuracy. All process parameters are programm ...
This AMADA AC2510 NT + MP 250 was manufactured in 2009. It features a 51-station turret and can handle sheet sizes up to 1270 × 5000 mm, with a maximum thickness of 3.2 mm for mild steel. The machine includes a loading system MP 250, enhancing its efficiency. Consider the opportunity to buy this AMADA AC2510 NT + MP 250 CNC punching machine. Contact us for more information.
Press brake, bending machine, swing bending machine, die bending machine -Swivel bending machine: with opening upper jaw for completely closed bent sheet metal profiles -Manufacturer: LOTZE Type HZ 2500/3 -Drive: mechanical, cam control semi-automatic / bending angle preselection -Max. working width: 2500 mm -Max. sheet thickness: 3 mm -Max. intermediate dimension: 470 mm -Connected load: 6 kW Accessories: incl. bending tools/stops, see photos -Dimensions: 4150/1110/H1970 mm -Weight: 5040 kg
Key data: 3050 mm, 20 mm, 800 mm
Hydraulic Sheet Metal Shear / Hydraulic Guillotine Shear Make: Steiner Type: HTS 30/20 Year of manufacture 1978 -Cutting length: 3050 mm -Cutting thickness: 20 mm -Back gauge: 800 mm, via handwheel - Motor power: approx. 30 Kw -Spare blade Basic machine: 4650 mm long, 2610 mm wide, 3200 mm high Weight: approx. 27,000 kg -Mechanical, in good condition- -Optical, in good condition- Hydraulics leak slightly no guarantee, no return, no warranty Machine is still in commercial use and can be viewed by appointment. Transport from the hall and removal is carried out by the buyer and at his expense
Hydraulic press brake Make: Steiner Type: 25/40c Weight: approx. 26 tons. Year of Make: 1984 Technical data: -Compressive force: 2600 KN = 260 tons. -Edge length: 4050 mm -Stand passage: 3050 mm -Table width: 300 mm -Table height: 850 mm -Projection: 300 mm with controlled rear stop with wiring diagram – hydraulics with wiring diagram – electrics Die length: 4050 mm Bending bar: 4050 mm in different lengths Stroke: 240 mm -Drive power: 22 kW -Hydraulic cylinder: Ø 240 mm Press brake is not used much, but is fully functional and in operation -optically good condition- -technich good condition- Hydraulic press brake with CNC control -Make: Cybelec - Type: PC-80/800 -was installed in 2005 -Control is fully functional and in operation no guarantee, no return, no warranty Machine is still in commercial use and can be vi ...
Swing cut shears Make: Simat Type: SST 3010 Year of Make: 1990 Cutting length: 3010 mm Sheet thickness: 10 mm -Cutting line lighting -Adjustable cutting gap - Motor power: approx. 19 kW -Backgauge Length: 3750 mm Width: 1700 mm Height: 1530 mm Weight approx. 8700 kg Return stroke by nitrogen cylinder Nitrogen cylinder: resealed in 2024 no guarantee, no return, no warranty Machine is still in commercial use and can be viewed by appointment. Transport from the hall and removal is carried out by the buyer and at his expense.
Manufacturer: Trumpf Model: TruLaser 3030 Year: 2021 Condition: Used Stock number: 9520 Laser ON: 36160 h Beam ON: 23760 h Laser power: 6 kW Work table length: 3000 mm Work table width: 1500 mm Source: TruDisk 6001
Key data: 100 t
Hydraulic flat, bar. Profile and angle steel shears with notching device and hole punch Make: Muhr + Bender (Mubea) Model No.: HIW 1000 Year of Make: 1990 -Punching force: 1000 KN = 100 tons. -Hole punch: Ø 40 mm in 22 mm material -Angle steel shears 90°: 160 x 16 mm -Flat steel shears: 600 x 15 mm -Notching device: sheets 13 mm Weight: 2550 kg Visually good condition Technical good condition Accessories: Punches and matrices see photo no guarantee, no return, no warranty Machine is still in commercial use and can be viewed by appointment. Transport from the hall and removal is carried out by the buyer and at his expense
Punching force: 300 kN Projection: 610 mm Quick-change device Support table with stop and folding cam Range of tools is included in the price Weight: 1,300 kg
table width: 3000 mmtable length: 1500 mmburner heads: 1 Control: CNC feed: 20.000 mm/mintotal power requirement: 15 kVAdimensions of the machine ca.: 4,5 x 2,5 m Heavy machine bed with precision guides for quiet movementmachine A ball bearing cross carriage for height adjustment with 400mm verticalHub Thermal separation of the drive and cutting areas ensures the highestprecision Automatic height finding and torch height control during cutting Torch holder with collision protection and automatic shutdown in the event of a collision Installation or implementation of the machine using the plug & play method with a forklift,Ant or crane possible 3-sided accessibility to cutting area through boom designSATOTEC suction table:The SATOTEC table system is characterized by a stable table constructionmax. cutting thickness of 150 mm. For cutting a workpiece thickness of 150mm, oxyfuel cutting tech ...
pressure: 80.0 tchamfer lenght: 2570 mmdistance between columns: 2125 mmcolumn arm: 420 mmtable width: 60.0 mmajustment speed: 100 mm/secworking feed: 10.0 mm/secreturn speed: 100 mm/secstroke: 200 mmdayligth: 470 mmtable height: 960 mmNumber of working hours: ~ 33.100 hoil volume: 90.0 ltotal power requirement: 9.0 KWweight of the machine ca.: 5750 kg.range L-W-H: 3630 x 2450 x 2550 mm- in checked conditions - machinevideo - https://www.youtube.com/watch?v=SskqZJdQxsQhttps://www.youtube.com/wat ch?v=KcKjibwWAKIEquipment:- AMADA CNC control, model OPERATEUR II Manual control for fine adjustment of the axes- CNC control OPERATEUR 2 in 8 axes (X1 X2,Y1 Y2,R1 R2,Z1 Z2)- CNC-controlled backgauge adjustment (X1 X2)- CNC-controlled vertical adjustment of the fence fingers (R1 R2)- CNC-controlled adjustment of the stop fingers left-right (Z1 Z2)- Swivel operation, front left- 1x freely movable ...
: gebraucht : 080242 : prompt, Zwischenverkauf v : Italien : 1890 €: 1 Oberwerkzeug 1033/28°/R 0,6/8 mm 4 x 835mmUnterwerkzeug 3000/U 8 mm 3 x 835 mm + 1 x 400 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Tank Head Manufacturing Dishing and Flanging machine up to 12 mm in 260 Nm/mm2Forming roll optional for sale Radius 50 / 70 / 100 / 150 / 200 / 250 / 300Fully hydraulic machineField off aplication heads, bottoms for vessel, tanks, beverage manufacturing tanks, beer tanksTorispherical headsEllipsoidal headsSpherical bottomsDished bottem tank constructionFlat bottemsSperical dished bottomsCones
Deburring machine manufactured in 2006. This TIMESAVERS 41-SERIE-900-WW features a working width of 900 mm and a maximum grinding height of 60 mm. It includes an abrasive belt dimension of 1900 × 930 mm and a rotating disc diameter of 1220 mm. If you are looking to get high-quality deburring capabilities, consider the TIMESAVERS 41-SERIE-900-WW machine we have for sale. Contact us for further details.
This 3-axis AMADA LC2415 Alpha 5 was manufactured in 2017. It features a maximum processing area of 5,040 × 1,550 mm and a powerful 3,500 W CO₂ laser, capable of cutting mild steel and stainless steel up to 10 mm thick. The machine has a maximum simultaneous feed rate of 114 m/min and can handle workpieces weighing up to 330 kg. If you are looking to get high-quality cutting capabilities, consider the AMADA LC2415 Alpha 5 CO₂ laser cutting machine. Contact us for further details.
: gebraucht : 9313B : prompt, Zwischenverkauf v : 1300 €: 1 : 4080 mmMINT CONDITIONwith manual crowning with single adjustmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
