subcategories
(3rd category level)
Manufacturer:
(Category: 107)
sheet width: 3000 mmplate thickness: 16 mmpre-bending: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 2550 mmplate thickness: 10.0 mm STpre-bending: 8.0 mm STdiameter of upper rolls: ~ 205 mmside roll diameter: ~ 195 mmControl: konv. oil volume: 80.0 Litervoltage: 380 Vtotal power requirement: 7.5 kWweight: 4500 kgrange L-W-H: 5000 x 1500 x 1300 mmFeatures:- Robust electro-hydraulic 3-roll bending machine- 3-roll concept offers a wide range of bending and rounding options- Pivoting control unit at the front Operation - Control of all rolls and machine axes Digital position display Manual operation via joysticks- Diameters of up to 1.1 times the top roll diameter are possible- Forged and hardened rolls with a hardness of 53-55 HRC- Low-maintenance, stable machine design- Sturdy welded steel construction- Electro-hydraulic folding bearing for easy pipe removal- Pressure gauge / pressure indicator for the rolls- Safety device (safety lanyard with switch unit)- Operating instruc ...
Punching force: 300 kN For example, punches a 20 mm hole in 12 mm steel Stroke release via foot switch Support table Range of tools is included in the price
Key data: 165 kN, 6 mm, 1250 mm
The machine was purchased directly from Trumpf in 2015. It was a demonstration machine from 2012, which had previously been used in the Trumpf training workshop (there only a few operating hours). Later, it was used in single-shift operation in the housing production of welding machines. Therefore, only 15700 operating hours. Exclusively in the sheet metal sector, especially sheet steel 1.25 and 2.0mm, occasionally 3mm. No stronger material. No known defects, machine is currently still in use, available from May 26. Reason for sale: Discontinuation of production. The "Compact Edition" of the TP1000 is optimized for a part size of 1250x1250. Larger formats can be done with the "Reset" function, additional tables are necessary. The outstanding advantage of the "Compact" machine is the small space requirement of only 4.13 x 5.84 m. The machine is equipped with almost all availab ...
Diosgyörer, OLG12-3050, Hydraulic, up to 12mm, Cutting length: 3050, Weight: 15to, L-350, W-220, H-240cm
Profile steel shears, 80/110, Mas. No. 4423251690035 See photos
weight max.: 1200 kgtable turning speeds: 80 - 1600 mm/min.roll diameter: 200 x 50 mmworkpiece diameter: 20 - 800 mmrange L-W-H: 520 x 470 x 390 mm Antriebrange L-W-H: dito mm Mitläufervoltage: 230 V / 50 Hzweight: 56.0 kg current new price approx. 3,000 euros special price on requestProduct description:- For processing cylindrical workpieces- Flat frame- Swivel castors with polyurethane coating- Clearly arranged operating elements- Infinitely variable speed- The control electronics are protected by a robust and. enclosed housing- With foot switch for start/stop- Drive with DC electric motors and gearboxThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 2020 mmplate thickness: 1,5 mm: 135 °: 100 mmtotal power requirement: 1 kWweight of the machine ca.: 965 kgdimensions of the machine ca.: 2680 x 640 x 1100 mmNEW PRICE: 9,990 EURODescription:- Foot operation enables positioning of the sheet metal with both hands- Workpiece clamping and bending process are motorized via a chain drive- Manual adjustment of the bending angle, reading of the angle on a scale ring- Many bending options with segmented upper beam- Precise movement of the bending beam via large flat guides- Heavy, robust welded constructionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: WA0136 : 3150 €: 1 : 8 mm: 3 x 1.000 & 1 x 1.050 mmcomplete 30°The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 48000 €: 916.8 €: 6 mm: 4 mm: 70 mm: 4000 mm: 550 mm: 8.75 kW: 4250 mm: 720 mm: 2000 mm: 2015 kgEasy operation with mobile control panel with push buttonsBuilt according to EC Safety Directives and has CE MarkOne set of flanging rolls included. Radius can be selected.One set of cutting blades includedMin. cutting diameter: 600 mm (with adapter for small diameter 400 mm)Min. flanging diameter: 550 mm (with adapter for small diameter 350 mm)Rotating speed 70 rpm with adjustable max. torqueTop and bottom flanging rolls powered in rotation with planetary reducersHydraulically adjustable bottom head for both, flat and crowned dish flangingBoth cutting and flanging operation on the same headUsers ManualOptional devices as fix or variable angle japanese hat attachement, rolls for stainless steel or high speed, small diameter attachement... on re ...
: neu : ca. 6 Monate ab Auftragse : Taiwan : 42100 €: 804.11 €: 2035 mm: 3.5 mm: Hydraulisch : 135 °: 3000 mm: 1100 mm: 1750 mm: 2450 kghydraulic drivenNC control for bending anglemanual back gauge 600 mmsharp rail 45° (in one piece)front angle beam 75 mmmechanical stop adjustment of upper beamclamping force adjustment of upper beamaccording to CE rules(sample photo)ALTERNATIVELY:versionAMH-K,withSECTIONEDsharp rail 45° OPTION:2 axes NC control with 7", touchscreen incl. motorized back gauge 800 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: gebraucht : 1988 : 090151 : prompt, Zwischenverkauf v : Italien : 12800 €: 1 : 42 mm: 4665 mm: 800 mm: 1160 mm: 1470 kg: 42 x 2,5 mm: 40 x 1,2 mm: 30 x 40 x 1,7 mm: 40 x 30 x 1,3 mm: 255 mm: 22 mm: 180 °: 90 °/s : 5,5 kW: 120 lCapacity specifications refer to 400 N/mm²Maximum bending radius with pipe guide rollers: 255 mmMaximum bending radius with pipe guide slide: 175 mmMinimum bending angle: 4°Maximum usable length without positioning device: 3900 mmMaximum usable length with positioning device: 3370 mmAdjustable mandrel extension travel from 8 mmOpening and closing travel of the counter-clamping jaws: 0-45 mmOpening and closing travel of the rollers or slides: 12-22-42 mmOperating manual in GermanMachine does not comply with AMVO or UVV regulationsTools not includedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : 2025 : 090089 : prompt, Zwischenverkauf v : Türkei : 8900 €: 171.77 €: 1 : 20 to: 185 mm: 200 x 12 mm: 480 x 1060 mm: 200 mm: 80 mm: 10 mm/s: 10 mm/s: 2.2 kW: 930 mm: 1150 mm: 480 mm: 1200 mm: 530 kgProgrammable stroke and retraction pointAdjustable speed and pressureManual jog operation and automatic operating modeHolding pins and tools hardened and ground3 holder pinsBending toolManual stop 400 mmFoot pedalOPTIONS:Cutting-, punching- or pipe bending tools on requestThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 12 Wochen ab Auftrags : Türkei : 12950 €: 248.64 €: 0.4 - 2 mm: 300 mm: 300 mm²: 63 mm: 150 m/min: 10 m/s²FESTO pneumatic systemSIEMENS servo drive and control system7’ colour touch screen SIEMENS2 feed rollersOption:Handwheel and Simlinx remote maintenance module € 4.290,--The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 12 - 14 Wochen ab Auf : Deutschland : 4010 mm: 1.5 mm: 2 mm: 1.5 - 2 mm: 3 : 3 : 1000 mmFully automatic bending in two ways without the need to rotate the sheetHydraulic driveBMS MULTI-Touch with automatic depth stopPowered rotary shearAdditional rail on the bending beamMaterial support2x foot pedalSafety equipment accoring to the control rules BG Germany3 year warranty on stands and tension arms.Quality Made in Germany.FURTHER MODELS FROM3 UP TO12 M LENGTH AND FROM 1,25 MM UP TO 2,00 MM BENDING CAPACITY ON REQUEST.OPTIONS: Preserving material support made out of synthetics price on request Hydraulic radius adjustment (air gap adjustment)the bending capacitiy of aluminium rises up to 2,5mm price on request Extended depth 20 - 1.250 mm price on request Conical depth stop to bend conical profiles andnarrow/wide bendings for easy intermateing price on request Fully automatic gr ...
: neu : ca. 12 Wochen ab Auftrags : Türkei : 16100 €: 309.12 €: 2050 mm: 3 mm: 35 1/min: 1.5 °: 750 mm: 3 kW: 800 mm: 520 mm: 2720 mm: 1575 mm: 1230 mm: 1900 kgThe machines feature a robust, welded steel frame for maximum cutting precisionMotorized back gauge 750 mm, ball screw spindles, NC control2 cutting edges on the upper blade and 2 cutting edges on the lower blade800 mm squaring arm with scale2 support armsMechanical downholderManual cutting gap adjustment on the frontCutting line illuminationFoot pedalEmergency stop buttonOperating manual with EC declaration of conformity.INCLUDES THE FOLLOWING OPTIONAL EQUIPMENT:Blades suitable for cutting stainless steelRear light barrier protectionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 12 Wochen ab Auftrags : Italien : 2000 mm: 6 mm: 6 mm: 4 mm: 5 mm: 4.5 mmHardened and polished rollersNumerical control Siemens PGS-Classic with touchscreenCone bending with electronic control and inclination of the bottom rolleroil coolerSimultaneous rotation and roller movementSimultaneous roller and support movementPossibility to bend variable radii (ovals, ellipses, etc.)Hydraulic micro-positioning by the PLC for higher accuracyInfinitely variable speed for roller movementInfinitely variable speed for rotationPrepared for retrofitting supports (up to 5 axes)Prepared for retrofitting loading/unloading stationsPrepared for retrofitting CNC controlsExtra large, double hinged drop endElectronic parallelism system for the synchronization of the rollersHydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more)Double linear guide for the movement o ...
: gebraucht : 2023 : 5542 : prompt, Zwischenverkauf v : Italien : 11600 €: 1 : 1300 mm: 150 mm: 150 mm: 250x350 mm: 945 mm: 0.75 kW: 1400 mm: 1000 mm: 1450 mm: 300 kgDemo machine / mint conditionNet price (price for new machine € 13.600,00)Easy T is a manually operated deburring machine suitable for various metalworking processes such as grinding, deburring, edge rounding and polishing for various types of materials - stainless steel, steel, copper, brass and aluminum.The grinding head with two rotating tools (grinding wheel or brush) is mounted on a swivel arm.The Easy T is equipped with a freely adjustable speed and a vacuum system, so that workpieces are fixed on the table. It is a cost effective and effective solution for conventional grinding and deburring. All edges of the workpiece are machined from all angles and directions. The grinding head can be swiveled through 180 ° an ...
: gebraucht : 1992 : 090174 : März 2026, Zwischenverkau : Belgien : 17800 €: 1 : 3050 mm: 6 mm: 11 - 25 1/min: 0.5 - 3 °: 18 : 750 mm: 11 kW: 3850 mm: 1750 mm: 1720 mm: 4600 kg: 770 mmSC 5 control for:- Sheet thickness input- Automatic cutting angle and gap adjustment- Cutting length limitation- Programmable backgauge lengthMotorized backgauge 750 mmDownholder protection guardFoot pedalTable supports with ball bearings1 side fence 1000 mmOperating manual in GermanMachine does not comply with German accident prevention regulations (UVV) or Austrian AMVONEW BLADESThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Stroke: 15 mmpressure: 3 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Offer 26084 Technical data: - Max. working width 2040 mm - max. material thickness at 40 kg / mm² strength 4 mm - Bending angle adjustment electronically pre-selectable 0 - 135 ° - Automatic follow-up control for a complete workflow - Largest opening width / stroke of the upper beam 350 mm - Height adjustability - bending beam 100 mm - The lower beam 100 mm - Upper bolster drive 400 V / 4 kW - Bending beam drive 400 V / 4 kW - Bending beam adjustment - Backgauge adjustable with handwheel - E-foot button - Space requirement with back gauge - approx. W 3200 x H 1650 x D 2100 mm - Weight approx. 4500 kg
Key data: 1250 mm, 4 mm
Max. cutting length: 1250 mm Max. sheet thickness: 4 mm steel Controlled backgauge Side stop and table extensions Cutting length limitation Cut edge lighting Light barrier to protect the rear area Knife sharpened Weight approx. 2800 kg
Key data: 3000 mm, 4 mm
Hydraulic Swivel Bending Machine -Heavy welded construction -centrally driven bending beam -Hydraulic drives -Standard stroke 400 mm -Cybelec control screen retrofitted Machine is fully functional Year of construction 2000 With honeysuckle foot splints 100 mm and various accessories Viewing possible by appointment LxWxH approx. 5000 mm 2500 mm 2700 mm Weight approx. 8500 Kg
Guillotine Shears - Safan Darley M-Shear 310-6 TS200 – BJ 2020
: neu : ca. 10 Wochen ab Auftrags : Türkei : 111500 €: 2107.35 €: 3100 mm: 20 mm: 20 mm: 16 mm: 16 mm: 12 mm: 350 mm: 350 mm: 260 mm: 1,5-5 m/min: 22 kW: 6000 mm: 2200 mm: 1900 mm: 15000 kg4 rollsfullhydraulic drive of upper roll and lower rollhydraulic infeed of lower and side rolldigital read-out of lower and side rolls positionhardened rollsconical bending devicehydraulic load relieving of upper rollhydraulic drop-end bearing2 working speedscentral lubrication systemprotectionagainst overloadmoveable control paneaccording to CE rulesOPTIONAL EQUIPMENT:infinitely adustable speed of rollshydraulic side supporthydraulic top supportNC controlIMPORTANT ISSUES AT CONICAL BENDING:the max. sheet metal thickness isequivalent to 50 % of nominal capacitythe cone length can be max. 30 % oremust be more than 60 % of roll lengthhardened rolls are recommendedThe data for this ad was created wit ...
: gebraucht : WA0102 : 292 €: 1 : 835 mm: 80 mm: 25 mmmint conditionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
…the one with the continuously adjustable working speed.Depending on the workpiece or other job requirements the operator of the ECKOLD Kraftformer KF 340 can easily adjust the working speed between 220 and 600 strokes per minute. The powerful machine can form sheet metal and profiles up to 3.0 mm (m.s.) material thickness.The KF 340 Kraftformer is one of the medium-sized motor driven machines. The steplessly adjustable lifting speed ensures optimal working. A slow speed is selected to form thicker material, for flattening, straightening or very precise finish forming. A high number of strokes facilitates and speeds up stretching, doming (dishing), planishing and planing.Like with all other ECKOLD Kraftformer machines the large number of tools available makes the KF 340 power hammer the perfect “all-rounder” in the sheet shop.Co ...
