The distance indication is not possible, because your location could not be determined. Prerequisite is that your browser allows cookies and location determination.
sheet metal working / Straighteners
date: 21.12.2023 add to watchlist
approved
dealer
item-No.: 162992534

used

check Seller: Ramsauer Maschinen AG
Location: 5452 Oberrohrdorf Land-ch

add to watchlist

Ref. No.: 850162 Item No.: 40219 F. Nr: 193 Connection: 380 V /50 Hz

sheet metal working / Straighteners
date: 02.03.2024 add to watchlist
approved
dealer
item-No.: 156872999

used

check Seller: Ambold Pressen GmbH
Location: Schmölln Land-de

add to watchlist

material width: 250 mmmaterial thickness: 2 - 4 mmno. of straightening rolls: 7 run-in height: 1250 mm mmstrip intake tiltable, positiv: 25 °strip intake tiltable, negativ: 30 °total power requirement: 3 kWweight of the machine ca.: 800 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet metal working / Straighteners
date: 01.03.2024 add to watchlist
approved
dealer
item-No.: 163483052
New in: 2020

used

checkTOP Seller: Surplex GmbH
Location: Eschenburg-Wissenbach Land-de

add to watchlist

Description: .DIMECO R 693 J+ sheet metal straightening machine y.o.m 2020! - Number of straightening rollers 17 - Number of pull rollers 2 - Pull rollers diameter 180 mm - Number of support rollers 147 - Largest roller distance 200 mm The machine is equipped with: - Control cabinet with drive outlets for height adjustment on the inlet/outlet side of the straightening cassette as well as for the two main drives connected in parallel - Hydraulic unit for the hydr. Movements of the infeed table and the delivery of the infeed driver - Support rollers firmly installed at the top and bottom - Documentation, digital only! - Additional, unused straightening roll cassettes with 17 straightening rolls and intermediate rolls at the top and bottom. The machine was until lately integrated into a fully automatic punching line, therefore it is necessary to complete the control system. There is alr ...

sheet metal working / Straighteners
date: 02.03.2024 add to watchlist
approved
dealer
item-No.: 159270803
New in: 1990

used

check Seller: Hans-Jürgen Geiger Maschinen-Vertrieb GmbH
Location: Metzingen Land-de

add to watchlist

material width: 3000 mmmaterial thickness: 0 mmno. of straightening rolls: 0 total power requirement: 22 kWweight of the machine ca.: 14,5 tdimensions of the machine ca.: 7,5 x 2,5 x 2,9 mD U N K E SHydraulic Straightening System for Flat material and Section Material With Straightening Press ( C-Frame ) Model HR 63/TR 25/ HRW 25Year 1990 ( H 89-1960 )____________________________________________________________Consistin g of:Straightening C-Frame Press, Model HR 63, Pressure 63 to, Stroke ofPiston 160 mm, Straightening speed up/down 25/75 mm/s, Daylight 550 mm,Distance to column 620 mm, sensitive Straightening stroke via handlever withturret-stop, Measuring device for accurate straitening via a lightbarHorizontal Straightening Device Model HRW 25, Pressure 25 tons attached on right hand side of vertical Press, straightening stroke 160 mm, straightening speed fwd/bwd57/10 mm/s, ...

sheet metal working / Straighteners
date: 02.03.2024 add to watchlist
approved
dealer
item-No.: 162762372
New in: 2009

used

check Seller: Maschinen Schwartpaul GmbH
Location: Lager Plettenberg-Siesel Land-de

add to watchlist

material width: 320 mmmaterial thickness: 8 mmno. of straightening rolls: 9 material cross-cut: 2000 mm²weight of the machine ca.: 4,2 tdimensions of the machine ca.: 2000x2000x2400 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet metal working / Straighteners
date: 02.03.2024 add to watchlist
approved
dealer
item-No.: 162762368

used

check Seller: Maschinen Schwartpaul GmbH
Location: Lager Plettenberg-Siesel Land-de

add to watchlist

material width: 500 mmmaterial thickness: 0 mmno. of straightening rolls: 9 weight of the machine ca.: 2 tdimensions of the machine ca.: BxTxH 2000x1500x2500 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet metal working / Straighteners
date: 20.12.2023 add to watchlist
approved
dealer
item-No.: 162160060
New in: 1986

used

check Seller: Reinhold Schmitt GmbH
Location: Land-de

add to watchlist

execution: PART LEVELER year of construction 1986/2014 material width 1.250 mm material thickness 0,80 - 20,0 mm no. - leveling rolls: 19 leveling roll diameter 80 mm infeed height approx. 1.000 mm connection power 81 kW speed 2 - 20 m/min. roller conveyors (each on infeed and run out side) approx. 1.800 mm (driven) dimensions: part leveler: approx. 2.800 x 1.850 x 2.120 mm (without roller conveyor) control cabinet: approx. 1.000 x 400 x 1.900 mm hydraulic unit: approx. 2.400 x 1.250 x 1.800 mm

sheet metal working / Straighteners
date: 20.12.2023 add to watchlist
approved
dealer
item-No.: 162234722
New in: 1995

used

check Seller: Reinhold Schmitt GmbH
Location: Land-de

add to watchlist

6HI LEVELER year of construction 1995 / 2023 CHECK material width 1,000 mm material thickness 0,50 - 3,00 mm no. - leveling rolls: 21 leveling roll diameter 30 mm distance between stands 1,050 mm total power requirement 13 kW speed 14 m/min. machine weight approx. 7,0 t required space approx. 2,70 x 2,40 x 2,20 m drive motor 7,50 kW working direction right - left leveling roll needle bearings intermediate rolls rolling mill adjustment vertically 12 mm rolling mill adjustment motor driven measuring device digital measuring display metric conveyor belt at infeed and run out side quick change device hydraulically circulating oil lubrication of leveling roll bearing rails and drive shafts SIEMENS S5 PLC control LENZE frequency converter drive motor = brake motor The leveler is under power and can be tested with clean material.

sheet metal working / Straighteners
date: 01.03.2024 add to watchlist
approved
dealer
item-No.: 157477975
New in: 2014

used

check Seller: AMARON s.r.o.
Location: Land-cz

add to watchlist

Inv. Num. : 5652 Type: MD6-RE60.1300 Producer: LC CATTANEO Created: 2014 Parameters: Maximum sheet metal plate width: 1300 mm Maximum sheet thickness (ordinary steel): 0.8-3 mm speed: 60 m/min Height adjustment from the ground: 990-1360 mm

sheet metal working / Straighteners
date: 24.01.2024 add to watchlist
approved
dealer
item-No.: 161381106
New in: 1999

used

check Seller: FORMEX SK s.r.o.
Location: Land-sk
VS

add to watchlist

1/ Straightener RSTM-SU-W 60/7/700 NIR Built in 1999, producer. PBK Automation GmbH Vöhringen, DE Direction of work - from left to right Passage width - 720 mm Belt width from 50-700 mm Strip thickness from 0.4-3.0 mm Strip cross-section max. 1750 mm2 Feed roller diameter - 80 mm Straightening and correction roll diameter. 60 mm Feed speed - max. 30 m/ min Feed rollers - 2 Straightening rollers 7 Correction roller - 1 Drive power 3 kW Colour RAL 6011 - lime green - Upper straightening head half can be folded up pneumatically in a V-shape for cleaning purposes - Infeed of the upper feed roller is also pneumatic - Adjustment of the straightening block is done via socket wrench Drive - via three-phase geared motor with frequency converter - Single-axis positioning control incremental CPS 20 Freely programmable CNC positioning control - Simodrive 611 Te ...

sheet metal working / Straighteners
date: 04.09.2023 add to watchlist
approved
dealer
item-No.: 126885003

new

check Seller: FORMEX SK s.r.o.
Location: Land-sk
Price: 2.500 € add to watchlist

Band width - 280 mm Thickness 3 mm Setting rollers suit 5-reel 2, all diameter 60 mm Control actuator, band storage adjustable from 0, 5 s â 15 s video available Dimensions 80 x 60 x 140 cm more info on request

sheet metal working / Straighteners
date: 02.03.2024 add to watchlist
approved
dealer
item-No.: 162762367
New in: 1984

used

check Seller: Maschinen Schwartpaul GmbH
Location: Land-de

add to watchlist

material width: 250 mmmaterial thickness: 2 mmno. of straightening rolls: 19 weight of the machine ca.: 1,5 tdimensions of the machine ca.: BxTxH 1500x1500x2400 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet metal working / Straighteners
date: 02.03.2024 add to watchlist
approved
dealer
item-No.: 160990801
New in: 1989

used

check Seller: Maschinen Schwartpaul GmbH
Location: Lager Plettenberg-Siesel Land-de

add to watchlist

material width: 150 mmmaterial thickness: 3 mmno. of straightening rolls: 7 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet metal working / Straighteners
date: 02.03.2024 add to watchlist
approved
dealer
item-No.: 162762366
New in: 1993

used

check Seller: Maschinen Schwartpaul GmbH
Location: Lager Plettenberg-Siesel Land-de

add to watchlist

material width: 300 mmmaterial thickness: 3 mmno. of straightening rolls: 7 weight of the machine ca.: 0,5 tdimensions of the machine ca.: BxTxH mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet metal working / Straighteners
date: 20.12.2023 add to watchlist
approved
dealer
item-No.: 160777137

used

check Seller: Reinhold Schmitt GmbH
Location: Land-de

add to watchlist

material width 1.650 mm material thickness 0,50 - 2,00 mm no. - leveling rolls: 23 leveling roll diameter 53,6 mm required space approx. 6,00 x 3,00 x 2,90 m machine weight approx. 19,60 t daylight width 1.750 mm roll lenght 1.820 mm no. - support blocks 14 (7 x above / 7 x below) with support rolls no. - support rolls 175 (84 x above / 91 x below) support roll diameter approx. 112 mm power - main motor 55 kW height adjustment -motor driven tilting adjustment - motor driven support block adjustment (below) mechanically/manually and individually adjustable 1 set of leveling rolls (spare parts) diameter 53,68 mm central grease lubrication of bearing rails circulating oil lubrication of drive and drive shafts control unit - not available all motors: main motor (NEW), swivel motor, motor for height adjustment and oil pump are provisionally equipped with a connection cab ...

sheet metal working / Straighteners
date: 20.12.2023 add to watchlist
approved
dealer
item-No.: 157729987

used

check Seller: Reinhold Schmitt GmbH
Location: Land-de

add to watchlist

LEVELER WITH DRIVE material width 400 mm material thickness 0.40 - 4.00 mm number of leveling rolls: 17 leveling roll diameter 68 (69) mm distance between stands 580 mm adjustment: mechanically tilting: mechanically support: 1 x mechanically number of support rolls: 18 (9 x above / 9 x below) support roll diameter: 130 mm pneumatical ventible length measuring roll mounted on frame construction electrical drive power: 20 kW accessories: toggle lever shear as cut to length shear knife length: 680 mm control cabinet control element mounted on frame construction

sheet metal working / Straighteners
date: 28.08.2023 add to watchlist
approved
dealer
item-No.: 148628062

used

check Seller: Schweizer Service
Location: Land-de

add to watchlist

Specifications of the straightening machine RM2300/8/9 Engine power in KW: 22KW Straightening machine width: 2300 mm Max directional width 2200 mm Straightening rollers Number: 9 pieces Straightening roll diameter: 95 mm Support rollers Number: 22 pieces Support rollers below: 12 pieces Support rollers on top: 10 pieces Sheet thickness max: 8 mm

sheet metal working / Straighteners
date: 12.07.2023 add to watchlist
approved
dealer
item-No.: 126917016
New in: 1985

used

check Seller: FORMEX SK s.r.o.
Location: Land-sk
Price: 500 € add to watchlist

Band width 250 mm, stuffenlos adjustable speed Btto 600 kg

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
Banner ad information