used Sheet Metal Machining Centres for sale

x-travel: 1200 mmy-travel: 600 mmz-travel: 600 mmControl: Heidenhain iTNC 530 spindle speed:: 6000 1/min.spindle taper: CAT 40 spindle drive: 7,5/11 kWtable surface area: 1300 x 600 mmtable load: 1200 kgfeed speeds: 1-10000 mm/minrapid travel x/y/z: 20/20/15 m/mindistance table - lower edge spindle: 125-725 mmtotal power requirement: 25 kVAweight of the machine ca.: 7,5 tdimensions of machine: 3600 x 2300 x 3000 mmEquipment.CNC control Heidenhain iTNC 530Tool changer 24-pos., double arm changerMax. tool diameter 80/150 mmMax. tool length 250 mmMax. tool weight 8 kgPreparation for hydraulic machine vicePreparation for 3-D measuring probesChip conveyorCoolant systemMachine documentationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 2 Number of axles: 4 St.tool taper: HSK 63 toll turrets: 60 weight: 9600 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 635 mmy-travel: 510 mmz-travel: 460 mmspindle turning speed - stepless: 20-14000 U/minweight of the machine ca.: 4 tdimensions of the machine ca.: 5 x 3.5 x 2.7 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 835 mmy-travel: 510 mmz-travel: 510 mmControl: HEIDENHAIN iTNC 530 spindle turning speed range: 20 - 10000 U/mintool taper: SK 40 table-size: 1000 x 560 mmtable load: 0,8 tfeed speeds infinitely variable: 20000 mm/minrapid traverse: 25 m/minpower capacity: 9 kWno. of tools in the magazine: 30 Stückworkpiece diameter at full load: 80 mmwotkpiece diameter with 2 vacant positions: 130 mmtool length - max.: 300 mmweight of tools max.: 6 kgDimensions (LxWxH): 3,5 x 2,3 x 2,4 mweight of the machine ca.: 4,25 tdimensions of the machine ca.: 5,2 x 6,5 x 2,7 m CNC control HEIDENHAIN iTNC 530 3-D measuring probe TS649 30-position ATC Internal coolant supply through the work spindle, 20 bar Coolant system with belt filter system Chip conveyor DocumentationThe machine wild be sold without tool holders.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 1607 Type: CB90VZB SL 6600 Producer: DYNOBEND B.V. Created: 2011 Parameters: 3 CNC-controlled axes Programmable speed Network Connection Windows Novell and Linux Software for work preparation Standard Specifications: Bending angle max: 200° Adjustment accuracy: 1/10° Tube torsion: 360° Booster power: 70kN Software IGES Centerline without marking Pipe length max. 6.3m Tube pre- and post-carriage 300mm Max. tube diameter 90mm Crushed tubes twisted 100 x 12 x 1 5 Min. radius over rolling process with or without mandrel > 1000mm Smallest radius with fixed tool not running and not torsional > 1 5D Repeat accuracy of machine 0.1mm 3-D bends

Max plate size 1600x3000 mm Drilling heads 1 Drilling tools per head 6 Max drilling diameter 40 mm Max drilling thickness 130 mm Spindle speed 3000 rpm Plasma torches 1

x-travel: 560 mmy-travel: 410 mmz-travel: 510 mmControl: PC-Fusion-CNC 640M table surface area: 900 x 410 mmworkpiece weight max.: 500 kgtool taper: SK 40 spindle turning speed range: 12000 U/minfeed range: 1 - 8000 mm/mintotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mUsed in 1-shift operation (prototyping).Operating hours: 15000 h- CNC control Mazatrol PC-Fusion-CNC 640M- 30-station ATC- Air blow device on the spindle- Niagara cooling / flushing system 100 L / min.- Cooling through the spindle 15 bar- Coolant tank: 200 L- Chip conveyor- 3 lamps to indicate machining status- Automatic switch on/off including warm-up function- CNC option package Performance EIA/ ISO- Synchronous tapping, spiral interpolation, Mazak TornadoTapping, etc.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

control: SIEMENS 828 D for axes: 4 x-travel: 1800 mmy-travel: 800 mmz-travel: 700 mmtable surface area: 1960x750 mmtool magazin:: numbers of tools: 24 max. tool diameter: 110 mmmax. tool length: 300 mmmax. tool weight: 15 kgspindle taper ISO: 50 spindle turning speed - stepless: 0-6000 U/minspindle drive: 18.5 kWfeeds -stepless-: 0-10000 mm/minrapid motion -longitudinal/cross/vertical: 10 m/minvoltage: 400 Vdimensions of machine: 5000x3630x3295 mmweight: 16 trotary table:: GSA+ CNC-320R tail stock: TS-B21 Coolant through spindle: pressure: 20 Bar3D measuring tracer: RENISHAW OMP-60 Coolant installation: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

with CNC-path-control: HEIDENHAIN type: TNC620 HSCI FS for axes: 3 x-travel: 1020 mmy-travel: 560 mmz-travel: 600 mmtable surface area: 1000x560 mmtable load: 1.35 ttool magazin:: numbers of tools: 40 max. tool diameter: 76 mmmax. tool-dia with free toolbox: 125 mmmax. tool length: 305 mmmax. tool weight: 7 kgmilling head: spindle taper:: SK40 spindle turning speed - stepless: 100-16000 U/minPower: 14.75 KWfeeds -stepless-: 16000 mm/minrapid motion -longitudinal/cross/vertical: 40 m/mindimensions of the machine ca.: 3x2.3x2.6 mweight of the machine ca.: 6.8 tCoolant through spindle: pressure: 18 3D measuring tracer: RENISHAW OMP40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1600 mmy-travel: 900 mmz-travel: 800 mmcontrol: HEIDENHAIN iTNC 530 for axes: 3 table surface area: 1700x850 mmtool magazin:: 30 spindle taper:: SK 40 spindle turning speed - stepless: 100-10000 U/minfeeds infinitely variable to rapid traverse: 2-20000 mm/minvoltage: 400 Vdimensions of the machine ca.: 385x420x325 cmweight of the machine ca.: 18.6 tCoolant through spindle: pressure: 18 bar3D measuring tracer: RENISHAW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 6978 Type: P4-2220 Producer: Salvagnini Created: 2003 Parameters: Switch-on hours: 66,600 h Compressive force: 220 t Maximum bending length: 2250 mm Max. bending height: 203 mm Maximum sheet thickness (mild steel): 2 mm Maximum sheet thickness (stainless steel): 1.2 mm Maximum sheet thickness (aluminum): 3 mm Equipment: Tools 2023 New hydraulic motor on ADP New valves on ADP New temperature sensor ADP Customization RIP Customization Adjusting the stop on the X and Z axes 2020 Replacement of the lower bending knife on P4 2220 Pressure test and replacement of 3 x oscillating cylinders Pressure test Upper bending of oscillating cylinders Regulation of the upper bending blade Adjustment of the lower bending blade Replacement of the cables on the left side of the valves and on the right side 3A1-AH 6 2019 Rotator Adjustment Replace ...

Inv. Num. : 6489 Type: P4X - 2725 Producer: Salvagnini Created: 2010 Parameters: Switch-on hours: 48 267 h Hours: 47 894 h Maximum bending length: 2700 mm Maximum bending height: 260 mm Power consumption: 34 kW Dimensions: 15,000 x 9,000 mm Equipment: Clipping function

x-travel: 2000 mmy-travel: 550 mmz-travel: 560 mmweight of the machine ca.: 10 tdimensions of the machine ca.: 5.5 x 3.2 x 3.1 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.