subcategories
(3rd category level)
Manufacturer:
(Category: 107)
: neu : ca. 12 - 14 Wochen ab Auf : Italien : 4010 mm: 2 mm: 2 mm: 1.5 - 2 mm: 5 : 5 : 1000 mmfully automatic bending in two ways without the need to rotate the sheethydraulic driveBMS MULTI-Touch with automatic depth stoppowered rotary shearadditional rail on the bending beammaterial support2x foot pedalsafety equipment accoring to the control rules BG Germany3 year warranty on stands and tension arms.Quality Made in Germany.FURTHER MODELS FROM3 UP TO12 M LENGTH AND FROM 1,25 MM UP TO 2,00 MM BENDING CAPACITY ON REQUEST.OPTIONS: Preserving material support made out of synthetics price on request Hydraulic radius adjustment (air gap adjustment)the bending capacitiy of aluminium rises up to 2,5mm price on request Extended depth 20 - 1.250 mm price on request Conical depth stop to bend conical profiles andnarrow/wide bendings for easy intermateing price on request Fully automatic gripper ...
: neu : ca. 8 Wochen ab Auftragse : Spanien : 24800 €: 476.16 €: 60 to: 500 mm: 5 : 2 : 40x11 mm: 32 1/min: 350x10 mm: 120x10 mm: 45/40 mm: 100x10 mm: 150x10 mm: 5.5 kW: 2100 mm: 1400 mm: 2060 mm: 1750 kg5 workstationsfoot pedal triggerhydr. driveflat steel shears incl. Device for reducing the deformationangle iron scissors with round and square bar openingtriangle clawpunching and bending device for flat irontable at the flat steel and notching stationuser manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 12 - 14 Wochen ab Auf : Deutschland : 6400 mm: 1.75 mm: 2 mm: 6 : 1000 mmfully automatic bending in two ways without the need to rotate the sheethydraulic driveBMS MULTI-Touch with automatic depth stoppowered rotary shearadditional rail on the bending beammaterial support2x foot pedalsafety equipment accoring to the control rules BG Germany3 year warranty on stands and tension arms.Quality Made in Germany.FURTHER MODELS FROM3 UP TO12 M LENGTH AND FROM 1,25 MM UP TO 2,00 MM BENDING CAPACITY ON REQUEST.OPTIONS: Preserving material support made out of synthetics price on request Hydraulic radius adjustment (air gap adjustment)the bending capacitiy of aluminium rises up to 2,5mm price on request Extended depth 20 - 1.250 mm price on request Conical depth stop to bend conical profiles andnarrow/wide bendings for easy intermateing price on request Fully automatic gripper system wi ...
: neu : ca. 12 Wochen ab Auftrags : Türkei : 43000 €: 821.3 €: 2050 mm: 10 mm: 10 mm: 8 mm: 10 mm: 8 mm: 8 mm: 6 mm: 200 mm: 200 mm: 180 mm: 6 m/min: 3850 mm: 1350 mm: 1290 mm: 3750 kgmotorized roller driveupper and lower roller drivenhydraulic side roll feed3 digital displayshydraulic folding bearingshardened rollersconical bending deviceuser manual in GERMAN or ENGLISHOPTIONAL EQUIPMENT (PRICES ON REQUEST):overhead craneside supportsNC controlvariable speedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 12 Wochen ab Auftrags : Türkei : Wechseltisch Laser sources from 3 - 30 kWTable dimensions:3 x 1,5 / 4 x 2 / 6 x 2 / 6 x 2,5 mThe shuttle table is positioned longitudinally, which results in the best possible accessibility for optional loading and unloading systems.The system consists of the following components:Shuttle table system in longitudinal direction for simultaneous loading/unloading and cutting to reduce non-productive production timesEncapsulated cutting room with protective glazingCNC graphics control Siemens Sinumerik 840DLaser source Brilase or IPGCutting head with automatic focus adjustment, Durma or PrecitecCooling unit for cutting head and laser sourceCAD/CAM software LANTEK for programming including autonestingPositioning laserSheet check system (automatic detection of sheet position and dimensions)Automatic nozzle cleaningCentral lubricationSlug boxWorking ...
: neu : 2025 : 090131 : prompt, Zwischenverkauf v : Türkei : 4700 €: 109.71 €: 1 : 50 mm: 155 mm: 2 : 1.5 kW: 4,5 m/min: 60x10 mm / 500 mm, 40x10 : 100x15 mm / 450 mm, 60 x : 35x35 mm / 900 mm, 20x20 : Ø 35 mm / 600 mm, Ø 30 mm : Ø 70x2 mm / 1.000 mm, Ø 3 : 70x30x2 mm / 1.200 mm, 50 : 50x50x3 mm / 1.700 mm, 40 : 50x50x5 mm / 800 mm, 40x4 : 50x50x6 mm / 1.000 mm, 30 : 1050 mm: 750 mm: 1450 mm: 390 kg2 mech. driven rollsstrong cast steel constructionshafts made of special steel,hardened and groundtop roll manual adjustablehardened universal rollslateral rolls adjustable in 1 axishorizontal and vertical operationdouble foot pedal forfor- and backward drivemachine and equipment accordingto the CE regulationsuser manual in GERMAN and ENGLISHWE HAVE MORE THAN 210 REFERENCES!The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 12 Wochen ab Auftrags : Türkei : 11800 €: 226.56 €: 60 mm: 215 mm: 215 mm: 3 : 1.5 kW: 4 m/min: 80x20 mm / 1200 mm, 40x10 : 120x25 mm / 600 mm, 50 x : 50x50 mm / 800 mm, 20x20 : Ø 50 mm / 800 mm, Ø 20 mm : Ø 100x2 mm / 1600 mm, Ø 6 : 80x40x3 mm / 1400 mm, 40x : 70x3 mm / 1600 mm, 40x2 m : 70x70x7 mm / 1000 mm, 40x : 70x70x7 mm / 1200 mm, 40x : 1000 mm: 1400 mm: 1650 mm: 950 kg3 mech. driven rolls (brake motor)hardened shafts top roll hydraulic adjustablehardened universal rollslateral rolls adjustable in 1 axishorizontal and vertical operationdouble foot pedal forfor- and backward drivemachine and equipment accordingto the CE regulationsuser manual in GERMAN and ENGLISHWE HAVE MORE THAN 260 REFERENCES!The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: gebraucht : 2012 : 9690F : prompt, Zwischenverkauf v : China : 690 €: 1 : 100 mm: 3 mm: 90 °: 90 kgAdjustable stops on both sidesFinger guardThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 4 Monate ab Auftragse : 1530 mm: 16 mm: 12 mm: 7 1/min: 3 °: 8 : 500 mm: 22.5 kW: 250 l: 950 mm: 2350 mm: 1400 mm: 2000 mm: 5200 kghydr. drive unit, completely integrated in the machine bodyoverload safety, hydraulic and electricaladjusting of the cutting angleadjusting of the cutting gapblank holder pressure, adjustablesupport arm with angle stop and scale up to 600 mm4 rotating knives for VA steelmovable pedal switch with solenoid valvesMotorised backgaugeCentral lubricationexchangeable machine table supportsection area lightingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 4 Monate ab Auftragse : 1280 mm: 16 mm: 12 mm: 8 1/min: 3 °: 7 : 500 mm: 22.5 kW: 250 l: 950 mm: 2100 mm: 1400 mm: 2000 mm: 5000 kghydr. drive unit, completely integrated in the machine bodyoverload safety, hydraulic and electricaladjusting of the cutting angleadjusting of the cutting gapblank holder pressure, adjustablesupport arm with angle stop and scale up to 600 mm4 rotating knives for VA steelmovable pedal switch with solenoid valvesMotorised backgaugeCentral lubricationexchangeable machine table supportsection area lightingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 10 Wochen ab Auftrags : Türkei : 59900 €: 1132.11 €: 2050 mm: 3 mm: 2 mm: 4 mm: Motorisch : 3350 mm: 2200 mm: 1900 mm: 3800 kg: 1000 mmCNC control with tabular programming- 15,6", touchscreen controller on swivel arm- tabular programming by entering the axes values- open or drop hemming function- multi radius bending function as by pressing or by bending- programming of material quality, thickness, spring back, bending correction and creating a data base for every type of material, thickness and length- piece counter- autorisiation with password- 128GB HDD allows almost unlimited data storage- remote service connection via WLAN- detailled alarm, tool and paramter pageMotorized drive (servo motors) of the upper and bending beam (Z and Y axes)Motorized back stop (X axis) with servo drive, 1000 mm, rectangular configuration,with ball rollers in the sheet metal insertsUp ...
Key data: 100 t, 2600 mm
Manufacturer: ERMAKSAN Model: Speed-Bend Pro 2600×100 Year: 2022 Condition: Used Stock number: 9340 Control system: Delem DA-66T Press force: 100 t Maximum bending dimension: 2600 mm Motor power: 11 kW Machine height: 2550 mm Machine length: 4350 mm Machine width: 2500 mm Machine weight: 6273 kg Equipments: Back stop Front Support Arms Foot control Safety Covers Bending fixtures
Tube & profiles bending machine ,Tauring Slalom 60-3A 8 rollers for left and right hand bending sense Operation in manual and automatic programmable axis with digital screen readout One-pass bending programmable in different planes manipulator programmable tube turner” 12 mtrs length tube feeder Complete with several set of rolls for tube from 14 to 60 mm - 8 pcs each set = total 140 rolls. Power rotation 3 kw voltage Vac 400/50 power hydraulic bending 2,2 Kw
: neu : 2023 : 8286 : prompt, Zwischenverkauf v : Türkei : 2990 €: 1 : 2040 mm: 0.8 mm: 70 °: 2400 mm: 750 mm: 850 mm: 290 kgstraight upper toolmoveablemanual cutting deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 10 Wochen ab Auftrags : Türkei : 31600 €: 603.56 €: 2050 mm: 6 mm: 6 mm: 4 mm: 4 mm: 3 mm: 150 mm: 150 mm: 130 mm: 1,5 / 6 m/min: 4 kW: 4250 mm: 960 mm: 1100 mm: 2800 kg4 rollsTop rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan systemPinch roll and latereal rolls move with hydraulic cylindersDigital read-out for lower and side rolls positionHardened rollsConical bending deviceHydraulic load relieving of upper rollHydraulic drop-end bearing2 working speedsProtectionagainst overloadMoveable control paneAccording to CE rulesOPTIONAL EQUIPMENT:Infinitely adustable speed of rollsHydraulic side supportHydraulic top supportNC controlIMPORTANT ISSUES AT CONICAL BENDING:The max. sheet metal thickness isequivalent to 50 % of nominal capacityThe cone length can be max. 30 % oremust be more than 60 % of roll lengthHardened rolls are recommende ...
: neu : ca. 8 Wochen ab Auftragse : Türkei : 29990 €: 572.81 €: 0.4 - 3.5 mm: 200 mm: 700 mm²: 80 mm: 75 m/min: 10 m/s²: 10 Nmhelical gear boxWATTDRIVE (Made in Austria)FESTO pneumatic equipmentservo drive and control SIEMENS7", colour touchscreen SIEMENS2 driven rollsOPTIONAL EQUIPMENTHandrwheel and Simlinx remote control € 4.290,--The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 6 Monate ab Auftragse : Taiwan : 56100 €: 1060.29 €: 2540 mm: 3.5 mm: Hydraulisch : 135 °: 3 kW: 3850 mm: 1700 mm: 1860 mm: 3700 kgNC control for bending anglemanual back gauge 600 mmhydraulic drivenvertical movement of upper beamsegmented bladesegmented goose neck rail 30°, 110 mm with quick tool change systemone piece flat bottom bar 30 mmaccording to CE rules(sample photo showing model V-AMH 2535 2 axes NC control)OPTION:2 axes NC control with touchscreen incl. motorized back gauge 800 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : 2024 : 9739 : prompt, Zwischenverkauf v : Türkei : 22300 €: 428.16 €: 1 : 1 : 2030 mm: 6 mm: 6 mm: 5 mm: 170 mm: 4 kW: 3600 mm: 1020 mm: 1120 mm: 2400 kg3 rollsAsymmetrical rolls arrangement - with pre-bending2 driven rollsMotorized adjustment of lateral and clamping rollDigital read-out for lateral and clamping rollSwiveling top roll to the frontForward/reverse runHardened rollsMoveable control panelUser manual in GERMAN and ENGLISH(sample photo)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 2 - 4 Wochen ab Auftr : Niederlande : 5932 €: 114.49 €: 3/4 26,9 mm, 1 33,7 mm, mm: 5 mm: 3 mm: 93 kgThe motor driven AL 1-2U can be used to notch pipes with an external diameter of 27.9 mm 26.9 mm (3/4",), 33.7 mm (1",), 42.4 mm (1 1/4",), 48.3 mm (1 1/2",) and 60.3 mm (2",)and notch pipes with an external diameterof 22 mm to 76 mm for sink outflows.Do you often have to notch pipes? If so, the motor-driven AL1-2U equipped with a 2.2 kW electric motor is the ideal solution!The motor forms one unit with the special eccentric shaft that drives the notching tool. The motor is also equipped with an on/off switch with a zero voltage protection and guard.All the benefits in a nutshell: high productivity, low investments, simple and rapid operation, a number of diameters are readily available, ideal for double corner joints.The data for this ad was created ...
new
: neu : ca. 10 Wochen ab Auftrags : Türkei : 31620 €: 603.94 €: 0.4 - 2 mm: 600 mm: 1200 mm²: 80 mm: 75 m/min: 10 m/s²: 10 Nmhelical gear boxWATTDRIVE (Made in Austria)FESTO pneumatic equipmentservo drive and control SIEMENS7", colour touchscreen SIEMENS2 driven rollsOPTIONAL EQUIPMENTHandrwheel and Simlinx remote control € 4.290,--The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
: neu : ca. 8 Wochen ab Auftragse : Türkei : 31080 €: 593.63 €: 0.4 - 3 mm: 400 mm: 1200 mm²: 80 mm: 75 m/min: 10 m/s²: 10 Nmhelical gear boxWATTDRIVE (Made in Austria)FESTO pneumatic equipmentservo drive and control SIEMENS7", colour touchscreen SIEMENS2 driven rollsOPTIONAL EQUIPMENTHandrwheel and Simlinx remote control € 4.290,--The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : 2025 : 090130 : prompt, Zwischenverkauf v : Türkei : 3400 €: 1 : 30 mm: 148 mm: 118 mm: 2 : 0,75 kW: 2 m/min: 50x10 mm / 800 mm, 20x6 m : 80x15 mm / 700 mm, 30 x 6 : 30x30 mm / 900 mm, 10x10 : Ø 30 mm / 900 mm, Ø 10 mm : Ø 60x1,5 mm / 1.000 mm, Ø : 50x30x3 mm / 1.200 mm, 40 : 40x40x3 mm / 1.200 mm, 30 : 40x40x5 mm / 600 mm, 30x3 : 35x35x5 mm / 600 mm, 30x3 : 600 mm: 800 mm: 1450 mm: 220 kg2 mech. driven rollsstrong cast steel constructionshafts made of special steel,hardened and groundtop roll manual adjustablehardened universal rollslateral rolls adjustable in 1 axishorizontal and vertical operationdouble foot pedal forfor- and backward drivemachine and equipment accordingto the CE regulationsuser manual in GERMAN or ENGLISHWE HAVE MORE THAN 210 REFERENCES!The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 10 Wochen ab Auftrags : Türkei : 29000 €: 553.9 €: 2050 mm: 4 mm: 42 1/min: 750 mm: 7.5 kW: 800 mm: 450 mm: 2700 mm: 2300 mm: 1350 mm: 2800 kgmotorizedback gauge atrecirculating ballscrew with Control DT5hold down with rubber padsSide Lay with T-Slot2 Sheet support armsball in the tabletape measuretilting stoplight barriers on the back of the machinecutting line illuminationuser manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 10 Wochen ab Auftrags : Türkei : 57000 €: 1077.3 €: 2550 mm: 13 mm: 13 mm: 10 mm: 10 mm: 8 mm: 260 mm: 260 mm: 200 mm: 1,5 / 6 m/min: 7.5 kW: 4800 mm: 1600 mm: 1550 mm: 6800 kg4 rollsTop rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan systemPinch roll and latereal rolls move with hydraulic cylindersDigital read-out for lower and side rolls positionHardened rollsConical bending deviceHydraulic load relieving of upper rollHydraulic drop-end bearing2 working speedsProtectionagainst overloadMoveable control paneAccording to CE rulesOPTIONAL EQUIPMENT:Infinitely adustable speed of rollsHydraulic side supportHydraulic top supportNC controlIMPORTANT ISSUES AT CONICAL BENDING:The max. sheet metal thickness isequivalent to 50 % of nominal capacityThe cone length can be max. 30 % oremust be more than 60 % of roll lengthHardened rolls are rec ...
: gebraucht : WA0012 : 292 €: 1 : 835 mm: 80 mm: 12 mmmint conditionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Pipe Bending and Notching Machine Set – JD2 Model 32 + JD2 Notch Master Description Complete pipe processing set consisting of a JD2 Model 32 pipe bending machine and a JD2 Notch Master pipe notching machine. The system enables the complete fabrication of pipe structures – from bending to precise joint preparation. Technical Specifications Manufacturer: JD Squared (USA) Tube Bending Machine – Model 32 • Mechanical drive (ratchet system) • Maximum bending angle: 180° • Tube diameter: approx. Ø12 – Ø63 mm • Robust industrial design Tools included: • Dies for 22 mm and 25 mm tubes Other die sizes are available for this model Pipe notcher – Notch Master • Hole saw cutting system • Adjustable angle: 0–50° • Tube diameter: approx. Ø19 – Ø76 mm • Precision bearing construction Features • Complete system: Bending + connection preparatio ...
: gebraucht : WA0011 : 292 €: 1 : 835 mm: 80 mm: 12 mmmint conditionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: gebraucht : WA0066 : 860 €: 1 : 550 mm: 220 mmmint conditiondividedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
: neu : ca. 10 Wochen ab Auftrags : Türkei : 4900 €: 109.71 €: 1050 mm: 3 mm: 2 mm: 90 mm: 2080 mm: 700 mm: 1250 mm: 410 kg3 rollsasymmetric rolls - prebending2 rolls driven by handwheellateral roll adjustable by handwheellongitudinal grooves in lower and lateral rolltiltable upper rollconical rolling deviceuser manual in GERMANThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: gebraucht : WA0067 : 860 €: 1 : 515 mm: 220 mmmint conditiondividedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
450 € 
