subcategories
(3rd category level)
Manufacturer:
(Category: 107)
Inv. Num. : 8707 Type: TrumaBend V170 Producer: Trumpf Created: 2003 Parameters: Compressive force: 170 t Maximum bending length: 4080 mm Distance between frame walls: 3680 mm Stroke: 365 mm Machine weight: 18000 kg
Max. punching capacity: 800 kN Max. shear capacity: 1100 kN Punches 27 mm holes in 20 mm steel Shears on the flat steel shear to 500 mm up to material thickness of 18 mm steel Further technical data on request With an assortment of stamps and dies as desired
TBF controller card Trumpf bending machine suitable for Trumpf bending machine year 1998-2004
DM01 control module for Trumpf Suitable for Trumpf built between 1998 and 2004
DM05 control module for Trumpf Suitable for Trumpf built between 1998 and 2004
Trumpf Motherboard Control Board DELEM DA 65/69 SNA 4891 Control Motherboard Board DA 65/69 Trumpf bending machine built 2001-2004 including flat screen and front control panel
DM02 control module to Trumpf. Suitable for Trumpf built between 1998 and 2004
Safety control for Trumpf. Suitable for V50 to V200 without Bendguart.
4000w IPG Loading 8500mm Unloading 6500mm 3D HEAD Under power and can be inspected upon request
plate thickness: 8 mmpressure: 60 tnotching: width x thickness: 310-310-8 mm mmweight of the machine ca.: 3,5 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 2000 mmplate thickness: 3 mmrear stop: von Hand, 750 mmnumber of support arms: 2 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Max. sheet thickness: 16mm, max. cutting length: 3000mm, weight: approx. 15t. The machine is in good condition. An on-site inspection is possible.
gebr. Guillotine shears, Helmut Lotze, type 205.3000x16, built 1992 Working width: 3040mm Max. sheet thickness: 16mm Stand width: 3040mm Throat: 200mm Stroke width: 1000mm Motor power: 45kW Stroke rate: 22/min.
gebr. CNC punching press Finn-Power, type F6 SV, year 2005 Press force: 300kN Max. workpiece width: 4061mm Max. workpiece length: 1528mm Max. workpiece thickness: 8mm Max. workpiece weight: 200kg Fast feed X/Y: 80m/min/60m/min Tower head seats: 20 Tower head speed: 30rpm Travel speed: 100m/min Oil tank capacity: 330l Max. operating pressure: 300bar Dimensions X/Y/Z: approx. 5900mm, 6300mm, 2500mm Weight: approx. 13500kg Control: Siemens Sinumerik 840D Table of the machine has been extended. (Without machine housing)
gebr. CNC press brake Darley, type EHP 200, built in 1989 Press force: 2000kN Working width: 5200mm Power: 15kW Oil capacity: 160l Weight: approx. 20,000kg Tools & Accessories Included
Make: TRUMPF Type: TRUMATIC 2000R Year of Make: 2001 Working area: 1270 x 1270 mm Punching force: 18 tons Max. sheet thickness: 6.4 mm Max. workpiece weight: 75 kg Max. punching diameter: 76 mm Max. speeds: 90/60/108 m/min Accuracy: +/- 0.1 mm Length: 5100 mm Width: 5800 mm Height: 2070 mm Weight: 9200 kg Accessories: TOPS 2000 CAM software, tool holder, Very good condition, only thin sheets
gebr. hydr. Guillotine shears, Fabr. LVD, Type MVN 25 / 4, built in 1984 Capacity 2500 x 4 mm with backgauge with documentation Other accessories: - Conveyor table - Lift table
Mandrel tube bending machine Fabr. LONG Type EL 45 Specifications: for pipe diameters 45 x 2 mm Mandrel holder length 2,000 mm Bending speed for 90° approx. 3 s electr. Connection 380 V, 2.2 kW Weight approx. 1000 kg with tools: 16 x R 76 22 x R 76 28 x R 75 35 x R 105
Key data: 2000 mm, 6 mm
Köllschen AM 2000 × 6, built in 1970: Working width: 2,000 mm Max. sheet thickness: 6 mm Motor power: 12.5 kW
Type : Peddy Year of manufacture : 1974 Specifications: Cutting capacity 100 x 10 mm Round steel 25 mm Square steel 22 mm Weight 400 kg
Punching force: 300 kN For example, punches a 20 mm hole in 12 mm steel Stroke release via foot switch Range of tools is included in the price
Available for Immediate Relocation - Contact for Quote (1995) FJELLMAN Trimming Press Manufacturer: Fjellman Year of Manufacture: 1995 Press Force: 750 kN Opening Height: 1600 mm Number of Cylinders: 1 - Stroke Length: 1300mm - Diameter: 220/125 mm
Waterjet machine Flow Incl. new maintenance kit pump incl. documentation Year of Make: 2006 Manufacturer: FLOW Europe GmbH Manufactured Date: 11/05 Working area: (L x W x H): 3600 x 2000 mm Continuous working pressure: 3,800 bar High Pressure Pump: FLOW – Hyplex Pump Model HyPlex 50 Hours: 4342 hours Maintenance intervals: Regular according to maintenance schedule Last service at: 4102 hours (major pump maintenance) Software: Flow-Master PC Software Flow PATH Module, Version 6.0 Flow CUT Module, Version 6.0 Flow Master 6.0 Professional (FlowNest) Hardware clamping and clamping device, Flow, set-up and positioning aids with laser pointer, Devices 1x Sand Silo 1x Sand mixer unit Flow 1x Water Softening (WTS) 1x collision sensor defective Documentation package, Various spare parts, all pre-pipes and cables
4000w IPG / 3D Head / 8500mm bundle loader / 8500mm single bar loader / 6500mm unloader
CONTROLS PLC SIEMENS S7 OVERALL SPECIFICATIONS (COIL LINES) sheet width max.: 260 mm sheet thickness max.: 6.5 mm coil weight max.: 3 to feed velocity max.: 20 m/min feedstock transport direction: right to left COIL CHAIR coil weight max.: 3 toDECOILER design: single reel, traversable sheet width max.: 260 mm coil weight max.: 3 to mandrel expansion range from: 460 mm mandrel expansion range up to: 530 mmLEVELLER UNIT sheet thickness max.: 6.5 mm material cross section max. (450 N/mm2): 1500 mm² number of leveller rolls: 21 diameter of leveller rolls: 50 mm loop controls: yes decoiler KOHLER, type 3000.1 with coil-chairstraightening machine KOHLER, type KRM 50.260/2transfer bridge 6970 mm, hydraulic operated
sheet width: 1020 mmplate thickness: 1,5 mmdaylight opening: max. 85 mmweight of the machine ca.: 240 kgdimensions of the machine ca.: mSmallest bending width factor 10 x sheet thickness s Smallest inner radius factor 1.5-2 x sheet thickness sLowering capability of the lower and bending beams 20 mmOn this swing-beam bending machine, the beams and side stands are reinforced with particularly strong ribbing. The cross-sections are designed to be strong enough to bend even narrow offsets. On the AML 1000 model, the bending beam is balanced by a gas pressure spring.The opening width of the upper beam and the lowerability of the lower and bending beams are generously dimensioned.The machine is being sold as defective because the connection between the lower frame and the right side stand is broken (see photo taken from behind)!The data for this ad was created with ModulMWS - the software sol ...
blade length: oben 211/unten 180 mmplate thickness: max. 6 mmround bar steel: max. 13 mmweight: ca. 19 kgSturdy shears body of quenched and tempered steel. Moving blade guides free of play (with low friction losses), blades of special tool steel, specially hardened and ground. Lever arm with counterweight spring for protection in the event of accidents, all pivot pins adjustable, all models with steplessly adjustable clamping arm.With compound action. Cuts sheet metals and round steel bar.Colour: Red-brownThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 8000 mm, 3 mm
Machine is in stabillier welded construction with 9 columns, 9 clamping cylinders and 36 coupling joints K38 mounted on a base frame The machine has the following equipment: CNC 8000 Control with Touch Screen TFT Color Display 17 Inch Attachment rail, brush table, upper beam with water seam groove Oil filling, fastening and levelling material, emergency stop rail via the Full length of the machine, integrated emergency stop operation in the foot pedal for upper and lower Bending beam, 2nd foot pedal for 2-man operation, upper bolster protection 2 short-part clamping fingers Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Working length: 8000 mm Sheet thickness max. steel: 3.0 mm Sheet thickness max. aluminium: 4.0 mm Sheet thickness max. VA: 2.0 mm Back gauge (max:.) 1150 mm Back gauge (min.): 150 mm Colo ...
