subcategories
(3rd category level)
Manufacturer:
(Category: 107)
: neu : ca. 10 Wochen ab Auftrags : Türkei : 51600 €: 975.24 €: 3080 mm: 6 mm: 4 mm: 350 mm: 20 1/min: 0.5 - 2 °: 16 : 20 to: 1000 mm: 200 mm/s: 11 kW: 125 l: 3 Stk.: 820 mm: 494 mm: 3280 mm: 4100 mm: 2050 mm: 3650 mm: 1950 mm: 7980 kglinear guidedCNC touch screen D-touch 7back gauge,cutting angle,cutting gap,cutting length, quantityUSB portcutting line illuminationfoldable ball screws for back gaugeballs in tablefoldable finger protection, 1.000 mmside lay with T-slot, tilting cam and scale3 support arms wit T-slotsoilfillinglight barrier on the back of the machineuser manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
This 3-axis Mazak Optiplex 3015 was manufactured in 2012. It features a powerful 4 kW resonator and can accommodate a maximum sheet size of 3000 x 1500 mm. If you are looking to get high-quality laser cutting capabilities, consider the Mazak Optiplex 3015 CO2 laser cutting machine we have for sale. Contact us for further details.
This 3-axis CMS Smartline 2040 waterjet cutting machine was manufactured in 2023. It features an impressive X-axis stroke of 4,000 mm, Y-axis stroke of 2,000 mm, and a maximum cutting thickness of up to 220 mm. The machine includes a robust worktable size of approximately 4,150 × 2,080 mm and is equipped with a high-pressure intensifier pump. If you are looking to get high-quality cutting capabilities, consider the CMS Smartline 2040 machine we have for sale. Contact us for further details.
Max. knife length: 200 mm Max. sheet thickness: 4 mm steel Adjustable angle between 30° and 135° Selectable between hand and foot control Weight: approx. 1000 kg
Offer 26174 Technical data: - Bending performance - Tube at 45 kg / mm² Ø 6 - 48 mm - Wall thickness up to 3.25 mm - Max. bending radius 180 mm - Bending speed 20 °/sec. - Drive 400 V / 2.4 kW - Space requirement approx. W 6200 x H 1200 x D 1000 mm - Weight approx. 1100 kg - Operating hours read 972 h -with - Digital bending angle display + bending angle fine adjustment - With control SIEMENS SIMATEC Touch Panel - Mandrel bending device 4.5 m. with hydr. Withdrawal - Sawing unit - Deburring unit for internal and external deburring - Pipe positioning system - Bending tools without mandrels - 6 ,8 , 10 , 12 , 16 , 20 , 22 , 28 , 30 mm , - Partly possibly incomplete
A roll forming line by Instytut Obróbki Plastycznej (Poland) for plastic metal forming is available. Roll stations: 12, shaft diameter: 50mm, max. profile width: 300mm, max. profile thickness: 2mm, overall system dimensions X/Y: approx. 20m/4m. Including an automatic cut-off unit with an incremental length measuring system and a payoff reel. An on-site inspection is possible.
A hydraulic 4-roll plate rolling machine Promau (Prümau) is available. Working width: 3000mm, bending capacity: 13mm, pre-bending capacity: 10mm, rolls: 4. An on-site inspection is possible.
This 3-axis punch press for profiles PARS HMP SIRIUS PLUS -3000/3-L1 was manufactured in 2015. It features a maximum section dimension of 110 x 110 mm and can handle wall thicknesses up to 8 mm. The machine offers a punching speed of 1 hole/s and is capable of punching 2 sections simultaneously with its 2-row design. If you are looking to get high-quality punching capabilities, consider the PARS HMP SIRIUS PLUS -3000/3-L1 punch press for profiles we have for sale. Contact us for further details.
This 3-axis Baykal BPS 2004 CNC Plasma Cutting Machine was manufactured in 2019. It features a cutting table size of 2000 x 4000 mm and is equipped with a Hypertherm XPR300 cutting system, ensuring high-quality cutting capabilities. The machine includes advanced features such as automatic torch height control and True Hole technology. If you are looking to get high-quality cutting capabilities, consider the Baykal BPS 2004 machine we have for sale. Contact us for further details.
CNC punch press manufactured in 2008. This Muratec Motorum 2548 features a punching force of 25 t and a maximum sheet thickness of 6.35 mm. It offers an impressive X-axis travel of 2550 mm and Y-axis travel of 1600 mm, accommodating sheets up to 1250 x 5000 mm with repositioning. If you are looking to get high-quality punching capabilities, consider the Muratec Motorum 2548 machine we have for sale. Contact us for further details.
This 7-axis Mazak 3D Fabri Gear 150 was manufactured in 2005. It features an impressive X-axis travel of 8750 mm, Y-axis travel of 1270 mm, and Z-axis travel of 375 mm. The machine is equipped with a powerful 2.5 kW resonator, providing efficient cutting capabilities. If you are looking to get high-quality tube cutting capabilities, consider the Mazak 3D Fabri Gear 150 machine we have for sale. Contact us for further details.
Container rotator, boiler rotator, welding rotator, welding rotator, welding device, welding turntable, welding rotator -Manufacturer: Deuma Heaters, Container Rotating Device, Welding Rotating Device -Drive motor: -Load capacity: 14,000 kg -Roller spacing: 440 - 1800 mm -Rollers: Ø 400 mm / 400/60-305Z -Rolling speed: 0.3 to 1.6 m/min Right/Left rotation -Control unit: with hand control and foot switch -Individual components: see photos -Transport dimensions: 2930/12170/H645 mm / 2620/840/H620 mm -Weight: 1800 kg / 1150 kg
CNC Fiber Laser Cutting Machine with Manual Changing Table Technical data: Working area: 3000 x 1500 mm Number of cutting heads: 1 Control: CNC control system Maximum workpiece weight: 900 kg Travel speed: up to 91 m/min Machine weight: approx. 4980 kg Space requirement (L x W x H): approx. 5562 x 2270 x 2388 mm Equipment: BodorPower fiber laser source with 12 kW power Bodor Genius laser cutting head with automatic focus control Bodor Thinker 3.0 machine control Highly stable machine bed in tenon and tenon hole design Servo motors and drive technology from Bodor Nitrogen control valve for precise gas control Bodor Lightning technology for fast and efficient punctures Automatic residual material nesting for optimal material utilization 21.5 inch touch screen monitor Automatic adjustment of cutting gas pressure Active anti-collision protection Intel ...
Max. cutting length: 1270 mm Max. cutting thickness: 4 mm steel Manual backgauge with hand crank Cutting gap adjustment by handwheel Side stop and table extensions Weight: approx. 2000 kg
Max. feed length: 3000 mm Sled can be folded up Manual Moving Extension on the right 2 height-adjustable feet Plastic rollers
Key data: 2540 mm, 2 mm
Max. bending length: 2540 mm Max. sheet thickness: 2.5 mm steel Motor-controlled back gauge with folding cams up to 1500 mm Multiple program sequences with different bending angles and lifting heights possible Multibend 2000 controller Bending rail ground Weight: 1,700 kg
sheet width: 1000 mmplate thickness: 1,0 mmdistance between columns: 1030 mmdaylight opening: 80 mm: 135 °total power requirement: Handbetrieben weight of the machine ca.: 0,15 tdimensions of the machine ca.: 1,3 x 0,8 x 1,2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 1000 mmplate thickness: 5,0 mmdistance between columns: 1100 mm: 1010 mmCutting length: variabel mmcutting gap adjustment: variabel mmconnected load: 5,0 kWweight of the machine ca.: 2,5 tdimensions of the machine ca.: 1,8 x 1,6 x 1,7 mHydraulic guillotine shear with- Cutting gap adjustment- Support arms- Squaring armThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
This 8-axis Durma AD-SERVO 40220 was manufactured in 2018. It features a pressing force of 220 tons and a bending length of 4,050 mm. The machine is equipped with a Delem DA-69T Touch CNC control for precise operation. If you are looking to get high-quality bending capabilities, consider the Durma AD-SERVO 40220 press brake we have for sale. Contact us for further details.
: neu : ca. 10 Wochen ab Auftrags : Türkei : 13200 €: 253.44 €: 1270 mm: 5 mm: 140 mm: 3,5 m/min: 2.2 kW: 2470 mm: 750 mm: 1000 mm: 1350 kg3 rollsasymmetric rolls - prebending2 rolls driven by brakemotormanual Back Rollforward tiltable upper rollforward and reverse revsconical bending by tilt of backrollmovable control panelusers manual in ENGLISH or GERMANOPTIONS (PRICES ON REQUEST):hardened Rolls Motorised Back Roll (Power Rear Roll) Digital Read-OutThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 12 - 14 Wochen ab Auf : Deutschland : 8020 mm: 1.5 mm: 2 mm: 1.5 - 2 mm: 6 : 6 : 1000 mmfully automatic bending in two ways without the need to rotate the sheethydraulic driveBMS MULTI-Touch with automatic depth stoppowered rotary shearadditional rail on the bending beammaterial support2x foot pedalsafety equipment accoring to the control rules BG Germany3 year warranty on stands and tension arms.Quality Made in Germany.FURTHER MODELS FROM3 UP TO12 M LENGTH AND FROM 1,25 MM UP TO 2,00 MM BENDING CAPACITY ON REQUEST.OPTIONS: Preserving material support made out of synthetics price on request Hydraulic radius adjustment (air gap adjustment)the bending capacitiy of aluminium rises up to 2,5mm price on request Extended depth 20 - 1.250 mm price on request Conical depth stop to bend conical profiles andnarrow/wide bendings for easy intermateing price on request Fully automatic gr ...
Key data: 3000 mm, 6 mm
The dimensions of the machine are LxWxH 2000mm x 3800mm x 1400mm. The weight is approx. 3500kg. The machine is in a little-used condition.
Key data: 100 t, 2550 mm
The dimensions of the machine are LxWxH 2000mm x 3400mm x 2850mm. The weight is 7400kg. The machine is in a little-used condition.
This 3-axis DENER PL 1530 plasma cutting machine was manufactured in 2019. It features a cutting width of 1,500 mm and a cutting length of 3,000 mm, equipped with a Hypertherm HPR 130 XD high-definition plasma source. The machine is in new condition, installed but never used, with 0 working hours. If you are looking to get high-quality plasma cutting capabilities, consider the DENER PL 1530 machine we have for sale. Contact us for further details.
CONTROLS CNC controls BLM VGP 3D TECHNICAL SPECIFICATION Max. diameter of tube: 28 mm Max. wall thickness: 1.5 mmDIMENSIONS / WEIGHTS space requirements -left/right-: 3400 mm space requirements -front/back-: 1100 mm total height: 1500 mm total weight approx.: 1850 kgStainless steel max. 20 mm diameterCNC control with VGP 3D software
CONTROLS CNC controls BLM VGP 3D TECHNICAL SPECIFICATION Max. diameter of tube: 40 mm Max. wall thickness: 2 mmDIMENSIONS / WEIGHTS space requirements -left/right-: 4500 mm space requirements -front/back-: 2150 mm total height: 1800 mm total weight approx.: 4800 kgLoadingstation AL42max. 2300 mm, min. 500 mm, 150 kg
Container rotating device, welding rotating device, roller stand, rotators, pipe straightening system, roller stand rotating device -Roller stand: Container rotator without drive, 2 pieces -Roller spacing: 320 - 915 mm -Rollers: Ø 190 x 100 mm -Load capacity: kg -Submission/Price: complete -Transport dimensions: 1000/435/H240 mm -Weight: 70 kg
Key data: 4000 mm, 2000 mm, 12000 W
4000 x 2000mm BeamShaper 12KW FIBER
DURMA VS 3006 hydraulic guillotine shears were built in 2021 in Turkey by DURMAZLAR MAKİNA SANAYİ ve TİCARET A.Ş. The machine is designed for precision cutting of sheet metal with a maximum length of 3100 mm and a thickness of 6 mm. The machining is performed by means of high quality cutting knives, distinguished by their high wear resistance. Automatic adjustment of the knife angle and the gap between the blades enables adjustment of the cutting parameters to the type and thickness of the material. Positioning of the sheet metal is facilitated by a work table with integrated balls, on which it goes directly under the cutting line. Along the cutting line, there are hydraulic hold-downs, which stabilise the material during machining and prevent it from moving. The DURMA VS 3006 is operated from an advanced control system with an intuitive interface and access to many necessary func ...
