sheet metal working used for sale (3,274)

weight max.: 40 tworkpiece diameter: 150 - 4500 mmdrum diameter: 400 x 160 mmfeed: 100 - 1000 mm/mintotal power requirement: 2 x 1,5 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 20 tworkpiece diameter: 500 - 3800 mmdrum diameter: 350 x 150 mmfeed: 100 - 1000 mm/mintotal power requirement: 1,5 kWweight of the machine ca.: ca. 1,8 tDimensions (LxWxH): 2,2 x 2,7 x 0,9 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

working width: 1380 mmworkpiece height: 70 mm: total power requirement: 45 kWweight of the machine ca.: 5.500 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 1,6 mm: 4 tblade length: 156 mmangle adjustable from - to: fest Gradtable surface area: 450m x 305 mmtotal power requirement: Handbetrieb kWweight of the machine ca.: 95 KgDimensions (LxWxH): 530 x 380 x 480 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2050 mmplate thickness: 3 mmdistance between columns: 2100 mmback stop - adjustable: 600 mmconnected load: kWweight of the machine ca.: 1,1 tdimensions: 2,7 x 2,1 x 1,4 mThe machine works quietly and it is energy-saving by its gear motor and brake system. Our machine is manufactured as steel construction monoblock body welded from ST42 quality material. The blades on the machine are of 2379 quality and the brand’s name is BOHLER. These high-quality blades ensure quality and precise cutting. Emergency stop button and finger guard grill are standard equipment of foot pedal machine.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

material width: 305 mmmaterial thickness: 1,0 mmspeed: von Hand weight: 45 Kgdimensions: 500 x 340 x 420 mCombined sheet metal working machine with:- Bending, tool widths 25 - 50 - 75 - 75 - 105 mm.- Rolls, roll diameter 38 mm- scissors, max. 1015 x 1mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 30 x 8 mmsquare edge steel: 12 mmround bar steel: 15 mmweight: 0,025 t: 51 x 31 x 22 cmdimensions: 135 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1270 mmplate thickness: 2,0 mmdistance between columns: 1300 mmdaylight opening: 48 mm: 135 °total power requirement: Handbetrieben weight of the machine ca.: 0,4 tdimensions of the machine ca.: 1,6 x 0,9 x 1,2 mSegment-bending machineSegment widths:25, 30, 35, 40, 45, 50, 75, 100, 150, 250 and 260mm.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 35 (600) mm: 35 (900) mmL-beam: 50 x 50 x 5 (800) mmT - beam - web outwards: 60 x 7 (600) mmAxis diameter: 50 mmwork speed: 4,5 m/mintotal power requirement: 1,5 kWweight of the machine ca.: 0,4 tdimensions of the machine ca.: 1,1 x 0,8 x 1,5 mProfile bending machine with:- Foot pedal right / left- Recording: wave 50mm- with digital display- hardened special steel shafts- 1 set of standard rollers- Lower rollers are driven- Upper roll up and down hydraulically deliverable- Horizontal and vertical operation- Engine with braking deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1000 mmplate thickness: 8,0 mmdistance between columns: 1070 mmdiameter of upper rolls: 150 mmpre-bending capacity: 6,o mmconnected load: 4,0 kWweight of the machine ca.: 1,4 tdimensions of the machine ca.: 2,6 x 0,65 x 1,1 mm- Electrically adjustable rear roller- Electrically adjustable lower roll (material clamping)- Digital readout for rear roller movement- Digital readout for lower roll movement (material clamping)- Hardened rolls- Conical rolling- Swiveling top roll- Brake motor- Emergency stop- Documentation- 400VThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 160 tno. of strokes: 40 - 120 Hub/minsheet width: mmtotal power requirement: 40 kWPressing capacity 160 tonTable clamping area 1,100 x 1,280 mmRam clamping area 850 x 890 mmDistance between guides 1,120 mmDistance between columns (below guide ways) 1,350 mmDistance between Table and ram in upper position approx. 400 mmNo. of strokes 40 - 120 /minAdjustment of stoke 67 / 115 / 160 mmRam adjustment, motor driven 125 mmEjector travel 50 mmTotal electrical load, approx. 40 kW - 500 V - 50 HzWeight, approx. 24,000 kgAccessories / Special Features WEINGARTEN Sheet Metal Uncoiler with overhead loop control (space saving because it does not need a loop-pit). Strip width 375 mm. The loop control guides the strip-material from the uncoiler to the machine thru a straightening device with automatic supervision. 8-track slide bearing guide. Automatic oil-circulation lubrication. Hyd ...

: 35 mm: 35 mmbar material dia. max.: 70 x 2 mmrectangle: 60 x 60 x 3 mmflat steel: 60 x 10 mmAxis diameter: 50 mmwork speed: 4,3 m/mintotal power requirement: 1,5 kWweight of the machine ca.: 0,4 tdimensions of the machine ca.: 0,9 x 0,95 x 1,4 mProfile bending machine with:- Foot pedal right/left rotation- Hardened special steel shafts- 1 set of standard rollers- 2 rollers are drivenThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 24236 Specifications: - max. working width 2550 mm - max. cutting capacity St 40 4.0 mm - Cutting angle 1.30 ° - Positioning-controlled back gauge 20 - 750 mm - Front angle stop + support arms - E. footswitch - Stroke rate up to 34 rpm depending on cutting length - Drive 400 V / 3 kW - Table height approx. 850 mm - Space required including back gauge, without front support arms -ca. W 3250 x H 1250 x D 2000 mm - Weight approx. 3500 kg

Key data: 1250 mm

Exhibition machine (unused) Working width 1,250mm Bending capacity steel : 1.25 (400N/mm2) Bending angle max. 135 degrees

Brand new Schechtl segment bending machine Sheet width: 1250 mm Sheet thickness steel: 1.25 mm Sheet thickness aluminium: 2.00 mm Sheet thickness front: 0.8 mm Colour: blue Dimensions: 1730 x 740 x 1180 mm Machine weight: 290 kg without roller scissors Opening width: 90 mm Bending angle: 150 mm

: 10 mmPunching force: 55 to: 40x10 mmflat steel: 300x15 oder 200x20 mmL-beam 90°: 120x120x10 mmL-beam 45°: 70x70x7 mm: 40 mmsquare edge steel: 40 mm: 37 /min.throat: 250 mmweight of the machine ca.: 1.800 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

material width: 2100 mmmaterial thickness: 4,00 - 6,00 mmno. of straightening rolls: 11 sheet thickness - min.: 0,50 mmdiam. of the rolls ca.: 85 mmstraight. speed ca.: m/ minbetween stands ca.: 2000 mmtotal power requirement: 22 kWweight of the machine ca.: tdimensions of the machine ca.: 4,50 x 1,00 x 2,50 mMechanical height adjustment- Mechanical tilting mechanism- Bottom crowning- ReversibleElectric motor with adjustable speedBearings have been checkedAll lubrication points have been replacedControl cabinet has been rewired and cleanedNew oil has been addedLeveler is powered. Leveling test is possible.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ECKERT Opal WaterJet COMBO waterjet cutting machine was built in 2011 in Poland by ECKERT AS Sp. z o.o. The machine, designed for precision machining of workpieces with a maximum thickness of 250 mm, combines all the benefits of plasma and waterjet cutting. The machining process is performed on a robust, large work table by means of a powerful cutting head. All table travel components are protected by bellows guards to ensure uninterrupted operation for many years of use. The design made of high-quality closed steel profiles, in turn, guarantees the highest stability during even the most demanding challenges. The ECKERT Opal COMBO WaterJet is offered with, among others, CAD/CAM software and a 37 kW high-pressure pump. Technical specifications of the ECKERT Opal WaterJet COMBO water cutting machine - maximum workpiece thickness (water machining): 250 mm - feed rate: 25000 mm/min - w ...

Sheet Metal Shear, Power Shear, Hydraulic Shear, Strojarne Piesok CNTA 3130, Used Equipment Cutting Length: 3150 mm Maximum Sheet Thickness: 16 mm Dimensions (L x H x W): 4.15 x 2.65 x 2.65 m (measured as a whole, without disassembly) Weight: 16,300 kg Manufacturer: Strojarne Piesok Model: CNTA 3130/16A Electrical Data: 400 V; 50 Hz; 33 kVA

Press Brake, ESPE CTO 80, Used Machine Manufacturer: ESPE Model: CTO 80 Pressing force: 80 tons Bending length: 2500 x 3 mm Table dimensions: 2500 x 160 mm Main motor power: 10 kW Weight: 6100 kg

Inv. Num. : 8333 Type: TrumaBend V85 S Producer: Trumpf Generated: Parameters: Compressive force: 85 t Maximum bending length: 2050 mm Distance between frame walls: 1750 mm Machine height: 2375 mm Machine length: 3190 mm Machine width: 2100 mm Machine weight: 8750 kg

Inv. Num. : 8332 Type: TrumaBend V50 Producer: Trumpf Generated: Parameters: Compressive force: 85 t Maximum bending length: 1275 mm Distance between frame walls: 1040 mm Machine height: 2375 mm Machine length: 1930 mm Machine width: 2030 mm Machine weight: 4750 kg

Max. punching force: 50 kN Stroke actuation via footswitch

Max. sheet thickness: 2 mm steel Max. blank diameter: 1000 mm Motorized drive via foot switch

Punching capacity: 165 kNworking area: 2070 x 1280 mmplate thickness: 6,4 mmcontrol: CC 220 workpiece weight: 150 kgpunch diameter: 76,2 mm: 80 m/min: 55 m/minweight of the machine ca.: 8000 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 3050 mmtable width: 1530 mmburner heads: 1 stroke: 290 mmspeed: 120 m/minThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1020 mmplate thickness: 2,5 mmbending angle max.: 135 °stroke of upper beam: 25 mmweight of the machine ca.: 285 kgdimensions of the machine ca.: 1,35 x 0,85 x 1,20 m PRICE: 2.045,-- EUR - with an oblique segmented upper cheek- distribution segment: 25-30-35-40-45-50-75-100-150-200-270- done with the foot brake applicationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tube diameter: 4-20 mmwall strength: 2 mmbending radius min.: 10 mmbending radius max.: 75 mmbending speed: 35 mm/minpull up length of tube: 2000 mmControl: total power requirement: 7,5 kWweight of the machine ca.: 1,1 tdimensions: ca. 3100x1000x1400 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CONTROLS  PLC OVERALL SPECIFICATIONS (COIL LINES)  sheet width max.: 500 mm  sheet thickness max.: 4 mm  coil weight max.: 10.5 to  feedstock transport direction: right to left COIL CHAIR  coil weight max.: 10.5 to  stroke: 750 mmDECOILER  design: single reel   sheet width max.: 500 mm  sheet width (min): 150 mm  coil weight max.: 10.5 to  max. diameter of coil: 2020 mm  mandrel expansion range from: 470 mm  mandrel expansion range up to: 530 mm  feed velocity max.: 20 m/minCROP SHEAR  sheet thickness max.: 4 mm  working width max.: 530 mm  stroke rate (max.): 20 /minLEVELLER UNIT  sheet width max.: 500 mm  sheet width (min): 150 mm  sheet thickness max.: 4 mm  sheet thic ...

Inv. Num. : 8300 Type: ITS2 8025 Producer: AMADA Generated: 2000 Parameters: Hours: 35047 h Compressive force: 80 t Maximum bending length: 2500 mm Stroke: 100 mm Machine weight: 4950 kg Equipment: Tools