Manufacturer:
(Category: 101)
x-travel: 600 mmy-travel: 560 mmz-travel: 560 mmtotal power requirement: kWweight of the machine ca.: trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 30 mmthroat: 260 mmbore stroke: 125 mmcontinious capacity: 25 mmthreading: bis M20 turning speed range - stepless: 125 - 4000 U/minspindle taper: MK 3 transmission ratio: 2 feed: manuell bore depth: 125 mmcolumn diameter: 110 mmtable surface area: 420 x340 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mincl. new, heavy-duty machine jaw vice (jaw width 100 mm)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 1300 mmy-travel: 1000 mmz-travel: 600 mmControl: Makino Pro 6 spindle turning speed - stepless: 20000 U/minspindle motor: 22 kWrapid traverse: 58 m/mintable surface area: 1000 x 1300 mmA-Axis: +/- 30 °c-axis: +/- 60 °dimension of workpiece: 1500 x 1200 x 550 mmworkpiece weight max.: 2500 kgtotal power requirement: 39,3 kVAweight of the machine ca.: 20,5 tdimensions of the machine ca.: 4,1 x 3,2 x 3,2 m- Makino Professional 6 CNC control- 2-axis milling head- 40-position tool changer (HSK A63)- Coolant through spindle- Chip conveyor- Renishaw RMP 600Running hours: 8066hThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Inv. Num. : 8444 Type: UMC 500 Producer: HAAS Created: 2021 Parameters: Control system: HAAS Switch-on hours: 3043 h Table diameter: 400 mm Maximum table load (even): 226 kg Spindle drive power: 22.4 kW X-axis travel: 610 mm Y-axis travel: 406 mm Travel Z-axis: 406 mm Speed: 10000 1/min Maximum feed speed axis X: 16.5 m/min Maximum feed speed axis Y: 16.5 m/min Maximum feed speed axis Z: 16.5 m/min Cone: ISO 40 Number of all tools: 30 pieces Rapid traverse X/Y/Z: 22.9 m/min Machine weight: 5400 kg Equipment: Conveyor Renishaw workpiece probe Tool Holder Tools Renishaw tool probe Wi-Fi camera in the machine working room
Key data: 1060 mm, 620 mm, 620 mm
Vertical CNC Center YANG type MV 1060 Year of construction: 2006 Travel X: 1060 mm Travel Y: 620 mm Travel Z: 620 mm CNC FANUC Oi-MC Spindle speed: 8000 RPM Table size: 1180 x 560 mm Tools store: 24 tools Spindle motor: 11 kW Voltage: 380 V Weight: approx 6,5 T
spindle diameter: 110 mmx-travel: 2200 mmy-travel: 1600 mmz-travel: 1600 mmspindle turning speed range: 35 - 3000 U/minspindle drive motor: 18,5 / 15 kWspindle taper ISO: 50 w-axis: 500 mmtable surface area: 1250 x 1500 mmTable load: 5000 kgT-slot - width: 22 H8 B-axis (table): 0,001 °Control: FANUC 31i-B Rapid Travel X / Y / Z-Achse: 12 m/mintotal power requirement: 50 kVAweight of the machine ca.: 21,5 tdimensions of the machine ca.: 7,8 x 4,8 x 3,7 mAssembly 2018- CNC control FANUC 31i-B- Tool changer 60-fold (ISO 50)- Coolant system with IKZ 20bar- Chip conveyor- Renishaw OMP 60- Universal milling head- Angled table (2)- CEonly approx. 800h running hoursThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 25 mmthroat: 255 mmbore stroke: 135 mmspindle turning speed range: 8, von 105-2900 U/mintable-size: 500 x 350 mmcolumn diameter: 100 mmspindle taper: MK 3 total power requirement: 0,65 / 0,9 kWweight of the machine ca.: 190 kgdimensions of the machine ca.: 0,5 x 0,5 x 1,7 mElectric 380 Volt: Drill chuck: Unused exhibition machine at a special price:New gear machine, 2-stage right/left rotation, height-adjustable drilling head,Construction principle Arboga - Sweden, maintenance-free gearbox with helicalteeth Wheels, drill head and table are adjustable 360 degrees around the column,chip protection with electr. Switch, drilling depth indicator.This is a exhibition machine at a special price, so we are selling it without any warranty.Machine dealer with own stock of 1600 m².The data for this ad was created with ModulMWS - the software solution of LogoTec ...
bore capacity in steel (diameter): 17 mmturning speed range - drilling: 200-3000 U/minboring chuck: 3-16 mmweight of the machine ca.: 120 kgdimensions of the machine ca.: 1 x 0,5 x 2 mNo. 1328:Bench drill FLOTT, type TB 10 Sdrill chuck 3-16 mmFixed lower tableheight-adjustable intermediate tableDrill spindle holder MK 26 speeds 3-16 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle diameter: 135 mmx-travel: 1000 mmdistance between columns: mmy-travel: 700 mmbore capacity in steel: 60 mmspindle stroke: 300 mmspindle turning speed range: 40-2000 U/mintable-size: 1100x842 mmcross rail - adjustment: 770 Vertikalweg mmspindle drive: 6 kWtotal power requirement: kWweight of the machine ca.: 12,5 tdimensions of the machine ca.: mwith:- 2 axes digital display Newall- Rotoptic table- Swivelling rotary tableThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Inv. Num. : 8434 Type: BX900T Producer: Pinnacle Created: 2019 Parameters: Control system: Heidenhain TNC 640 Switch-on hours: 13002 h Hours: 9507 h Work table length: 1700 mm Work table width: 850 mm Maximum table load (uniform): 1200 kg Speed: 15000 1/min X-axis travel: 1500 mm Y-axis travel: 900 mm Travel distances Z-axis: 1100 mm Max. machining diameter: 800 mm Number of Stacking Positions: 60 pieces Machine weight: 17000 kg Equipment: Vises (2 pieces) Heidenhain Tool Probe Workpiece probes Heidenhain VERO clamping (Schunk brand) Clamps (approx. 79 pcs.)
Drill press, bench drill, column drill, pillar drill-Handover: in the current condition as viewed-Motor: HEW 0.8 kW-Table size: Ø 355 mm-Spindle mount: MK3-Travel: 500 mm-Projection: 300 mm-Columns: Ø 110 mm-Spindle stroke: 150 mm-Translation via: V-belt-Dimensions: 850/500/H1850 mm-Weight: 294 kg
x-travel: 730 mmy-travel: 560 mmz-travel: 560 mmcontrol: iTNC 530 HeidenhainNC-Swivle milling head:: turning speed range - main spindle: max. 18.000 min/-1power capacity - main spindel: 10 / 15 kWmax. Torque: 130 / 87 Nmtool taper: HSK-A63 swivellable: NC: +30 / -120 °work table:: table surface area: 1.000 x 600 mmT-slots: 9x 14 x 63 mmNC-Rotary table:: table diameter: 600 mmrotatable: C: 360 °max. table load: 500 kgtool magazin:: number of toolpositions: 60 pos.tool taper: HSK-A63 total power requirement: 40 kVAweight of the machine ca.: ca. 11,0 tdimensions of the machine ca.: 4,5 x 4,5 x 3,5 mDocuments: Chip conveyor: Coolantsystem: Coolant through spindle: AD high pressure coolant: 20 bar turning milling head: NC NC-rotary table: elektr. hand wheel: test probe: TS 640 Heidenhain elektr. hand wheel: iTWC 530 tool setting: BLUM Laser 3D quickSET: Signal lamp - 4 colour: P ...
Travel X/Y/Z: 610mm/508mm/610mm, rapid traverse X/Y/Z: 35m/35m/30m, feed: 7600mm/min, table dimensions X/Y: 760mm/510mm, max. table load: 700kg, tool holder: SK40, tool positions: 24, spindle speed: 10000rpm, power: 7.5kW. Machine dimensions X/Y/Z: approx. 2200mm/2400mm/2500mm, weight: approx. 5000kg, control: Ultimax 4, documentation available. On-site inspection is possible.
Control Winmax Travel X/Y/Z 2135 x 865 x 762 mm Spindle speed 12,000 min-1 Tool magazine for 40 Wkz., SK 40 Handwheel Ultimotion IKZ 40bar Probes Renishaw Conveyor
A DMG Mori CNC vertical machining center including pallet handling Lang is available. 1) DMG Mori, year of manufacture: 2014, travel X/Y/Z: 650mm/520mm/475mm, rapid traverse: 36m/min, speed: 14000rpm, spindle power: 24kW/16kW, tool holder: HSK-A63, tool positions: 30, table dimensions X/Y: 900mm/570mm. Machine dimensions X/Y/Z: approx. 3900mm/3400mm/2600mm, weight: approx. 6250kg, control: Heidenhain TNC 640, operating hours: 28250h, spindle hours: 13116h. 2) Automation system for pallets Lang Eco Compact 20, year of manufacture: 2018, pallet capacity: 20, loading arm reach: 1200mm, footprint X/Y: 2000mm/2000mm. Documentation available. On-site inspection is possible.
bore capacity in steel (diameter): 13 mmthroat: 180 mmbore stroke: 70 mmmorse taper: 2 MKtable:: 230 x 220 mmturning speeds: 240 - 3800 U/minengine output: 0,59 kWcolumn diameter: 70 mmdimensions: 600 x 350 x 850 mmweight: 40 kg- Height adjustable and angle adjustable table- Movable work table- Prepared for cooling system- Powerful engine- 3 hand levers for drilling feed- Safety shield with limit switch- Separate emergency stop- Built-in working lights- Incl. drill chuck 16mm - B16- Built-in automatic thread cutting.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Inv. Num. : 8429 Type: Bluestar 6 Producer: HÜLLER-HILLE Created: 2006 Parameters: Work table length: 630 mm Work table width: 630 mm X-axis travel: 700 mm Y-axis travel: 630 mm Travel Z axis: 700 mm Max. tool diameter: 150 mm Max. tool weight: 10 kg
Key data: 630 mm, 620 mm, 710 mm
ÖKK HP 500S CNC Horizontal Machining Center CNC Control Fanuc 160is-MB Pallet table size 500 x 500 mm Number of pallets 2x Table load 400 kg X-axis travel: 630 mm Y-axis travel: 620 mm Travel Z-axis: 710 mm Table Indexing 0.001° Spindle Heads MAS BBT40 Spindle speed 100 - 12,000 1/min Spindle drive 11/7.5 kW Number in Stacks: 60 If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail. Feel free to check out our other ads for a full overview of our stock. We are selling this machine at a special price, called "as seen". This means that we do not check the condition of the machine.
Key data: 1050 mm, 900 mm, 980 mm
Mazatrol Smooth G Travel X-axis: 1,050 mm Y-axis: 900 mm Z-axis: 980 mm Distance spindle nose to pallet center 100-1,080 mm Distance from spindle centerline to pallet surface 100-1,000 mm Pallet Changer – Palletech 6 pallets Pallet size: 630 x 630 mm Setup station NC rotary table 360,000 Items Milling spindle Drive power 30 kW Max. spindle speed 8,000 rpm Tool magazine 160 tool positions BT-40 More options Tool length measurement Synchronized Threading Detachable handwheel Coolant system and chip conveyor Conveyor 70 bar high pressure pump separate tank with filter
Key data: 3000 mm, 800 mm, 720 mm
Travel X-axis: 3,000 mm Y-axis: 800 mm Z-axis: 720 mm B-axis: 220° C-axis: 360° Table Table: 3,500 mm x 820 mm Rapid traverse X/Y/Z: 50 m/min B/C: 50/25 rpm Milling spindle Drive power: 35 kW Max. spindle speed: 18,000 rpm SK-40 DIN69781 Tool magazine Mazak Tool Hive System Number of tool positions: 155 More options Air blowing out on the workpiece High pressure 15bar through the spindle Mazak Monitoring B (Renishaw RMP60) Tool Length Measurement x2 Table Center Partition NC rotary table, 360,000 positions, diameter: 1,000 mm Conveyor 5-axis simultaneous machining package Drilling cycle with torque-dependent chip breaking B) Cylinder interpolation B) Rapid Traverse Constant Tilt Angle B) Milling spindle synchronized tapping
bore capacity in steel (diameter): 40 mmthroat: 325 mmbore stroke: 170 mmtable surface area: 730 x 590 mm0: 130 - 1200 U/minfeed: 0,09 - 0,16 - 0,28 mm/Utool taper: MK 4 total power requirement: 1,8 kWweight of the machine ca.: 0,7 tdimensions: 1,2 x 0,8 x 2,15 mDrill with:Feed2 gearsLeft/right rotationFoot switchMachine lightThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 2000 mmy-travel: 620 mmz-travel: 520 mmcontrol: Heidenhain TNC 530 CNCturning speed range - main spindle: max. 15000 min/-1tool taper: BT 40 table clamping surface:: 2500 x 550 mmtool change unit: 30-fach connected load: 25 KVAweight: 10,5 tDimensions (LxWxH): 8,0 x 2,6 x 2,75 mVertical CNC Machining Center- 30-station tool changer- Handwheel- Chip conveyor- Belt filter system- Several SK40 tool holdersThe system can be dismantled to 2.45 m.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 500 mmy-travel: 450 mmz-travel: 400 mmcontrol: 840 D sl SiemensMain spindle:: turning speed range - main spindle: 20 - 10.000 min/-1power capacity - main spindel: 13 / 9 kWmax. Torque: 130 / 87 Nmtool taper: SK 40 DIN 69871NC-Rotary table:: table surface area: 630 x 500 mmmax. table load: 300 kgSwivel range: 115 (-110 / +5) °rotation range: 360 °T-slots: 7x 14 x 63 mmtool magazin:: number of toolpositions: 30 pos.max. tool weight: 6 kgmax. tool diameter: 80 mmmax. tool-dia with free toolbox: 130 mmmax. tool length: 300 mmfeeds:: rapid traverse: X/Y/Z: 24 m/minfeed speeds: X/Y/Z: 10.000 mm/mintotal power requirement: 32 kVAweight of the machine ca.: 4,5 tdimensions of the machine ca.: 4,5 x 3,5 x 2,3 mDocuments: Chip conveyor: Coolantsystem: through spindle coolant: tool setting: TT 140 test probe: TS 649 paper band filter: Signal lamp - 4 colour: CNC - Milling Machi ...
Offer 25170 Specifications: - Drilling capacity in steel ST 60 40 mm - Drilling capacity in steel ST 60 50 mm - Drilling spindle holder MK 4 - Drilling spindle stroke 180 mm - Drilling spindle speeds infinitely adjustable with countershaft - Level 1: 60 - 210 rpm - Level 2 210 - 765 rpm - Level 3 120 - 420 rpm - Level 4: 420 - 1530 rpm - Projection 330 mm - 3 feeds 0.1 - 0.2 - 0.3 rpm - Table with 2 T-slots 720 x 360 mm - Height-adjustable via rack with hand crank - Max. distance table – drilling spindle approx. 780 mm - Max. distance machined base plate - drilling spindle 1250 mm - Coolant device -Lighting - Machine vise - div. 10 pcs HSS - Drill - Drive 400 V / 2.6 / 4 kW - Space requirement approx. W 720 x H 2050 x D 1150 mm - Weight approx. 350 kg
Vertical machining center DOOSAN DNM 650, control system FANUC
x-travel: 1016 mmy-travel: 660 mmz-travel: 635 mmcontrol: Haas table surface area: 1.372 x 610 mmtable load: 1.814 kgrapid traverse: 18 m/minturning speed range: 7.500 U/minpower capacity - milling spindle: 22,4 kWtool taper: SK 50 |no. of tools in the magazine: 30 Stückweight of the machine ca.: 7,5 tdimensions: 3,5 x 2,47 x 2,98 mVertical Machining Center- chipconveyor- external handwheel- Dual tool change arm- internal coolant- filter- 4th axis, 190 mm centre hight with tailstock- Oil dust collectorThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Travel X/Y/Z: 630mm/530mm/465mm, tool holder: SK40, speed: 12000rpm, tool positions: 32, table dimensions X/Y/Z: 920mm/540mm, machine dimensions X/Y/Z: 2600mm/2350mm/2750mm, weight: approx. 6500kg. The sensor must be replaced and calibrated. Documentation available. On-site inspection is possible.
Manufacturer DMG Model DMU 125 P hy-dyn Year 2001 CNC HEIDENHAIN TNC 430D Table Table dimensions 1,250 x 1,000 mm. Maximum weight allowed on table 2,000 kg. Routes and advances Longitudinal, transverse and vertical courses (X/Y/Z axes) 1,250/880/800 mm. Table rotation (C-axis) 0.001º (Continuous) Fast Axis Feed 30,000 mm/min Head Automatic Type Horizontal/Vertical Head Positioning (A-Axis) 0.001º (Continuous) SK-40 Spindle Cone DIN 69871 Speed range 20-18,000 rpm Main engine power 37 kW Equipment Automatic tool loader INCLUDED No. of Charger Tools 30 Internal cooling 40 bar INCLUDED HEIDENHAIN Optical Rulers INCLUDED Chip Conveyor INCLUDED HEIDENHAIN HR-410 Portable Steering Wheel INCLUDED Other Net weight 13,000 kg.
bore capacity in steel (diameter): 45 mmthroat: 350 mmbore stroke: 180 mm: 4 speeds: 30 - 765 U/mintable-size: 720 x 560 mmtotal power requirement: 3,4 kWweight: 950 kgdimensions: 1200 x 800 x 2300 mmColumn drilling machine OPTIdrill DP 33V promotion set / 3020680SETWith an electronically controllable drive in a modern design Industrial engine Quiet running spindle thanks to new spindle design Machine operation with safety electronics in 24 V direct current Guaranteed concentricity = 0.02 mm in the measured drilling spindle Clockwise/counterclockwise rotation Precision spindle bore Control panel with user-friendly, dirt and water resistant Membrane keyboard RPM display Separate emergency stop button Tapping function Precisely crafted, stable drill table with diagonal T-slotswith all-round cooling water channel, can be tilted sideways by ±45° and rotated by 360° Drilling depth stop LED ...
MEISTER MASCHINEN
