used Deep Hole Drilling Machines for sale

core drilling diameter max.: 32 mmbore depth: 1500 mmswing diameter: mmControl: Heidenhain TNC 430 total power requirement: 40 kWweight of the machine ca.: 15,5 tdimensions of the machine ca.: mCNC deep drilling and milling machine BUCK TBFZ 2000 CNCsuitable for deep hole drilling and milling of cubic workpieces.Technical dataTravel paths:X - axis (longitudinal) 2000 mmY - axis (vertical) 1000 mmZ - axis (drilling axis/drilling depth) 1500 mmW axis (boom) 500 mmB-axis (rotary table) 0-360°Drilling/milling unit:Tool holder SK 50 according to DIN 69871Speed 0-6000 rpmDrive power 17.25 kW at 60% EDNC rotary table (B axis):Clamping table 1800 x 1500 mmTable load max. 20000 kgFeed speed:X-axis (machine column) 0-15000 mm/minY-axis (vertical slide) 0-15000 mm/minZ axis (drilling slide) 0-15000 mm/minWork performance in material 1.2312:Drilling diameter with ELHB 4 - 32 mmThread cutting M30, ...

CNC Deep Hole Drilling Machine Milling Machine for Tool and Mold Making Manufacturer CHeto Model HETO 2000 Year of construction 2005 Traactions xyzw 2000/1200/650/1500 mm, table load 12000 kg. Machine immediately available and available. Dismantling and loading onto suitable trucks is cost-effective. Installation and commissioning on request.

core drilling diameter max.: 20 mmbore depth: 900 mmlongitudinal travel: 700 mmcross travel: 300 mmspindle travel: 600 mmw-axis: 750 mmweight of the machine ca.: 1.6 tdimensions of the machine ca.: 3.5 x 2.1 x 1.75 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Height of bed rail until mid-drilling: 315 mm Gr. On drill bit Ã?: 178,3 mm Bed length: 9400 mm Drilling depth approx.: 3150 mm Continuous feed range: 70-1750 mm / min Rapid traverse speed: 4.25 m / min Spindle box, bore: 62 mm Main spindle RPM: 180-1000 rpm Main spindle drive: 380 V, 15 kW Machine weight: 6.6 t

Solid drill diameter: 200 mmbore depth: / mmnumber of spindles: / Technical specificationsPower: 129kWControl: Siemens NC controlSpeed range (stepless): 2 - 300 rpmFeed range (in steps): 3 - 4500 mm / minOil system capacity: 20,000 litersMaximum flow rate: 1500 l / minCircumferential diameter in bezel: 1100mmCircumferential diameter over bed: 1250mmDistance between centers: 11000mmClamping diameter faceplate: up to 1100mmMax. Workpiece weight with a stick: 10tClamping range of the two steady rests: 150 - 1100mmClamping range BOZA: 1 = 200 - 400mm 2 = 400 - 800mmdimensionMin. Outside diameter: 406 mmMax. Outside diameter: 850mmWall thickness: 10 150mmMax. Workpiece length: 11000mmMax. Workpiece weight: 10 tMax. Strength: 800 N / mm²Specific cutting resistance (Ks): 2000 2100 N / mm²Machine dataMachine length: 28,800mmCenter height: 560mmCircumferential diameter over  ...

Specifications Power: 129kW Control: Siemens NC control Speed range (stepless): 2 - 300 rpm Feed range (in steps): 3 - 4500 mm/min Capacity oil plant: 20,000 liters Maximum flow rate: 1500 l/min Swing diameter in bezel: 1100mm Swing diameter over bed: 1250mm Center distance: 11000mm Clamping diameter face plate: up to 1100mm Max. workpiece weight with one setting stick: 10t Clamping range of the two bezels: 150 - 1100mm Clamping range BOZA: 1 = 200 - 400mm 2 = 400 - 800mm Dimension Min. outer diameter: 406 mm Max. outer diameter: 850mm Wall thickness: 10150mm Max. workpiece length: 11000mm Max. workpiece weight: 10 t Max. strength: 800 N/mm² Specific cutting resistance (Ks): 20002100 N/mm² Machine data Machine length: 28.800mm Center height: 560mm Swing diameter over bed: 1120mm Solid drilling diameter: 200mm Core drilling diameter: 350mm Boring d ...

Specifications: Drilling movement 1000 mm Manual travel : Y = 400 mm X = 700 mm W = 1400 mm Table surface 1200 x 600 mm Table rotatable +/- 180° Adapter SK 40

Machine Details Warehouse number 1105-03722 Machine type Deep hole drilling machine Make IXION Type TL 500 SVA Year of construction 1985 Control type CNC Control CNC Bosch Alpha Storage location HAGUENAU Country of origin GERMANY Delivery time immediately Freight base from stock Technical details Core drilling diameter - max. 1.5 - 18 mm Drilling depth 600 mm Clamping table, rigid 700 x 1,350 mm Clamping surface of the rotary table 1,000 x 500 mm Longitudinal movement of the table 600 mm Table displacement in drilling direction 400 mm Table rotatable 180 ° Vertical adjustment of the drill carriage 250 mm Drilling unit swivel +/- 15 ° Spindle cone MK 3 Number of speeds 8 Speed range 240 - 2,400 rpm Control CNC Bosch Alpha Motor power 1.0 / 1.6 kW Total power requirement 10 kVA Machine weight approx. 1.35 t Space requirement approx. 2.0 x 1.5 x 1.8 m Infor ...

core drilling diameter max.: 8 - 40 mmbore depth: 1300 mmswing diameter: . mmtable load: 7 / 10 ttable surface area: 1500 x 1000 mmtravel -x axis: 2000 mmtravel -y axis: 800 mmtravel -z axis: 2000 mmtravel -w axis: 1700 mmdrilling capacity diameter max.: 40 mmturning speed range - drilling: 60 - 6000 U/minmilling drive: 7/11 kWspindle taper ISO: 40 Control: Siemens 840D A-Axis: -25 / +15 °B-axis (table): 360 °total power requirement: kWweight of the machine ca.: tThe Auerbach IXION IA3 TLF is for deep drilling of cubicand rotationally symmetrical workpieces.Scope of processing: deep drilling, milling of outer contours, pockets,Grooving, centering, drilling, reaming, tapping, double inclined drilling.equipped with:- Siemens Sinumerik 840 D with electronic handwheel,- chip conveyor- Coolant through Spindle- Tool Control- Steady- The data for this ad was created with ModulMWS - the soft ...

Kramatorsk Model KJ1910 serial number 1913 Swing Over Bed: 1600mm Maximum Workpiece Length: 6300mm Maximum Drilling Diameter: 991mm Spindle power: 125.00kW Spindle Speed: 1 - 320 RPM Infinitely Variable power Existing Additional Chuck workholding range: 200 - 1250mm diameter, workpiece weight capacity using two open roll supports: 60,000kg, size range in closed backrest: 200 - 800mm, size range in open backrest: 630 - 1380mm, pressure head speed range: .125 - 500 infinitely variable, pressure head spindle bore diameter: 182 mm, pressure head motor power: 75kW DC, headstock speed ranges: 3, pressure head speed ranges: 2 Machine Length: 22950mm Machine Width: 4375mm Machine height: 2670mm Weight: 101091kg Condition Good

Kramatorsk KJ 1910 10-meter boring depth - Heavy duty: 25-ton workpiece >>> NOTE: MACHINE IS IN OUR WAREHOUSE IN ITALY

Kramatorsk KJ 1910 10-meter boring depth - Heavy duty: 25-ton workpiece >>> NOTE: MACHINE IS IN OUR WAREHOUSE IN ITALY

Deep hole boring machine - heavy duty deep hole boring machine Kramatorsk (Russia) KJ 1910 Year of manufacture 1986 Maximum boring diameter, mm 600 Maximum use of lenght mm 10000 (10 meters) Max 25 ton Machine in our warehouse in Northern Italy Center height over the bed, mm 670 Maximum work piece external diameter, mm 1300 Work piece length range on one-sided machining, mm 1000.. 10000 Work piece diameter range, mm: -in chuck of faceplate 200th.. 1100 -in open rest 400... 900 -in closed rest 200... 630 -in round rest 250... 550 Maximum work piece weight 25000 kg Range, 2 200 rpm spindle speeds Spindle diameter hole mm 700, Main motor power, kW 85 Counter rotation motor is 95kW Machine overall dimensions, mm 25550 x 3000 x 2290 Machine weight, kg 83000 Mimu machine tools (Italy) machine tools

core drilling diameter max.: 16 mmbore depth: 485 mmswing diameter: x mmtable-size: 590x350 mmspindle turning speed range: 230-2300 U/minweight of the machine ca.: 0.4 tTable with digital read outMisc accessorieswww.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Mollart Sprint 500, deep hole drilling machine, Fanuc Power Mate control, Max L = 500mm, Dia 20 mm, Spindles: 2, Spindle rotation: 10000 RPM, 100 RPM counter spindle rotation, Max pressure 100 BAR, The machine can be inspected under power in our warehouse in Gussago BS., Mimu machine tools, Deep hole drilling is the machining of holes with a relatively large depth to diameter ratio, whereas normal drilling techniques produce holes where the depth is rarely more than five times the diameter (5 xD). In deep hole drilling the ratio may reach 150:1, and any hole deeper than ten times the diameter (10 xD) should certainly be considered a deep hole, requiring a specialized drilling technique., Deep hole drilling can employ various machine set-ups: rotating workpiece, rotating tool, or both tool and workpiece rotating. The most common, however, is for the workpiece to rotate,  ...

: 0 bore depth: 10000 mmnumber of spindles: 0 Control: Siemens Simatic Touch SPS swing over bed: 1050 mmswing diameter over bed slide: 1600 mmboring diameter: 50 - 310 mmcentre height: 800 mmspeeds:: 2,5 - 400 total power requirement: 74 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The deep hole drilling machine have 6 spindles and is in very good condition, LIKE NEW! This can be like to inspect under pressure. On request we can send you more pictures. Number drill spindle 6 ELB and BTA drilling Min. drilling diameter 3 mm Max. drilling diameter 20 mm Max. drilling depth 1000 mm We see ourselves as a competent partner for downhole drilling, turning, milling and welding in paid labor. We will gladly make you an offer!

core drilling diameter max.: 25 mmbore depth: 1200 mmswing diameter: 160 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

TBT M1-4-320 4-Spindle deep hole boring machine, gundrilling interesting price Mimu Machine Tools (Italy) - Note: in our warehouse Mimu Machine Tools (Italy)

Sell a TBT quill block, Condition new. Pinol block has never been installed. Original price is 30.800,00 Euro net. .VB

Several deep hole drilling machines to be delivered at once, approx. 10 pieces Ideal for drilling rifle barrels! These are the types: T 20-2-750 T 20-S-750 TE10-2-500 T30-1000 T10-2-250 T10-2-500 T20-500

Ref. -No.: 10142Manufacturer: TIBOYear of construction: 2002Type of control: CNCControl: Siemens Sinumerik 802DStorage location: HalberstadtCountry of origin: DeutschlandDrilling diameter: 1-13 mmBore Depth: 250 mmDrilling spindle speed: 11.000 RPMX-Travel: 300 mmY-Travel: 210 mmZ-Travel: 250 mmMachine weight: 2,5 tFurther information:- With equipment

3-spindle deep hole drill -without electrics- Year of construction 1998 / rebuilding 2014

core boring: 70-560 mmbore depth: 20000 mmdrilling diameter: 70-500 mmcore boring capacity in St 60 - reboring: special: 560-1000 mmworkpiece diameter: 3200 mmworkpiece weight: 200 tfaceplate diameter: 2900 mmspeed of boring spindle:: 100 - 500 U/minfeed range: 3 - 2000 mm/minboring spindle drive: 55 kWspindle head drive: 150 kWworkpiece turning speeds: 230 U/mincontrol: Fanuc total power requirement: - kWweight of the machine ca.: - t2010 Retrofittedequipped with:- Fanuc Control- 4-Jaw Chuck- Oil Pressure Head- Boring Head- Drill Head- 2-Point Rollers Steady Rest (4)- 3 Point Steady Rest (2)- Bar Rest (2)- Coolant & Coolant Piping- Chip Conveyor- Honing Oil Tank & Honing Tool BarsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.