TyP / Model: BS 40 AIII Djc Hbvm Toiypmxj Sski Drilling capacity steel / cast iron: 50 / 60 mm Spindle mount: MK 5 Speeds: 32 to 1,400 rpm Feed: 0.11 to 1.73 mm/rev Table: 780 x 650 mm Clamping area: 630 x 500 mm Head height adjustment: 250 mm Stroke: 280 mm Footprint: 700 x 1,200 mm Total connection: 6.7 kW Accessories/equipment: thread cutting function, right-left barrel; autom. Feed, separate control cabinet Condition: good Weight: 1.5 t Dimensions: 780 x 1,200 x 2,700 mm Availability: immediately Location: Thuringia Arnstadt Loading: by buyer Stacker: is available Total weight: 1500 kg Operating voltage: 360 V Control voltage: 220 V Connected load: 5.73 kW

For sale is: 1 Piece Used Face and Lace Lathe Manufacturer: Werkzeugmaschinenfabrik Zerbst GmbH Type: DP1 / S3 x 3500 Year of manufacture: 1994 Technical data: Largest turning diameter over bed: 1,600mm Center width: 3,500mm Spindle bore: 100mm Face plate diameter: 1,250mm Total mass of the machine: approx. 24.8t incl. documentation Further pictures and videos can be sent on request. The following things have been renewed/repaired on the machine in the last four years: At the end of 2022, the tailstock was completely overhauled. New bearing and new tip and lubrication. 2024 Cross Support regenerated. Refurbishment of the wedge strips with new s ...

Zusammentragmaschine / Collating Machine TMF N14 14 Stationen Zusammentragmaschine A3 - 7 Stationen Zusammentragmaschine A2 14 Stations Collating Machine Size A3 - 7 Stations Collating Machine Size A2 Mit einem angebundenen Rüttler zig/zag / Delivery Jogger with an online zig/zag unit Panel Operation and Controls, Stau / Jamming Doppelbogen- und Fehlbogenkontrolle / double-sheet and no-sheet control Pre-set counter - Full receiving Tray Handnbücher / Manuals Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Econiche data: Drilling rig 345-31 WHT-No. 147-0338 SNr. 103 563 Linear unit M4: Fanuc, type: Beta is 4/4000 HV A06B-0064-B203 Motor: plug version with resolver Resolver line and motor cable: PM505CBL2040B 10 319V 50Hz 2.3A 3.5Nm , 3000 rpm Drill tape M3: Astro, type: ASM 46 SG10 3-400V 50/60Hz 65/60mA 4/4,8min-1 Spindle drive M1: Bonfiglioli, type: BN 132 S 6 No. 802002 Cod: 8D62030016-519951 230V / 460V 13.5A / 7.8A 50H7 940 min' 3kW cosQ 0.76 IP 55 IsKI.F Lifting drive M2: Fanuc, Type: Beta 22/2000 HV is A06B-0086-B503 Motor: in plug version with resolver and brake Resolver line and motor cable with brake: PM505CBL2020B 5 448V 50Hz 3.4A 22Nm, 2000 rpm Insert tape ...

ID3337 Wassara Drilling equipment / Bohrausrüstung Drilling equipment (Wassara W150 water hammer), new price of the entire equipment approx. 50,000 euros Drilling equipment, (Wassara W150 water hammer), original price of all equipment approx. 50,000 euros  ...

• more information

Type: Radial drilling machine Year of Manufacture: 2011 Find more here - / Contact us at -  ...

• more information

Flott SB M3 ST Pillar Drilling Machine. 3-speed 380V motor, runs smoothly. Spindle speeds are steplessly adjustable via the variable speed drive. Speeds adjustable from 200 to 2000 RPM. MK3 spindle taper. Quick stroke: 120 mm Drilling depth is adjustable. Table: 400 x 320 mm Table height is adjustable. Includes Röhm 3 to 16 mm drill chuck. Includes vise. Spindle guard. Emergency stop switch. Made in Germany. Machine is in good, well-maintained condition. Overall dimensions: 60 x 40 x 182 cm

Size: 45 x 150 mm Equipments: Double head paper driller Drill distance 45 - 150 mm Space behind drill heads 100 mm Operation Lever operated, single phase 240 Volts ...

• more information

Freesrobot Staubli RX170HM Deze robot is voorzien van gaten om te frezen in mallen van banden, maar ook in andere zaken is dit mogelijk. Koeling door de spindel en de koelmelk is luchtgekoeld. Smering Gebeurde met vet. spindelopname: HSK E 32 Werd gebruikt in Tire Mold fabriek Mecamold Herstal. Max weight on the table: 300 kg Admission in spindle (ISO): HSK E 32 Power on the spindle: 8 kW Drilling-capacity: 80 mm Tapping-capacity: 80 mm Control : Fanuc Number of axes: 6 Toolchanger: nee Number of toolholders: nee Number of rotations: 500 - 20 000 rpm Power principal motor : 5 kW

Size: 0x0 Equipments: 2 spindles ...

• more information