used Pillar-Type Drilling Machines for sale

: 40-1080 tool taper: MK 5 weight of the machine ca.: 2 tfeed: . The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Serial number 18067 Includes 2nd clamping table approx. 400 x 380 mmturning speed range: 30 bis 3000 rpm, table surface area l x w : 500x370 mm, weight approx.: 600 kg, Approx. Onsite Dimension. (l x w x h): 900 x 750 x 1,900 mm

bore capacity in steel (diameter): 35 mmthroat: 330 mmbore stroke: 165 mmspindle taper: MK4 turning speed range - stepless: 130-480/480-1750 U/mintable width: 742 mmtable depth: 594 mmtotal power requirement: 2,2 kWweight of the machine ca.: 700 tFeed with electromagnetic feed clutch0.1/0,2/0,3right- and left rotationCooling unit not available Table and Drilling Head height adjustableheight adjustment of upper drilling unit: 200 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bohrleistung in Stahl (-Ø: 36 mmthroat: 350 mmbore stroke: 180 mmBohrleistung in Guß (-Ø: 45 mmspindle taper: MT: 4 spindle head adjustment: Ý 500 mmtable surface area: 600 x 700 mmfloor plate:: 460 distance work spindle /surface of the table: 80 - 750 mmspindle turning speed range: 0,09 - 0,28 U/minfeeds: 380 mm/WUvoltage: 50 Vpower capacity: 2,5 kWweight of the machine ca.: 0,7 tdimensions of the machine ca.: 0,6 x 1,1 x 2,1 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: ja feed: 80 - 800 m/min: 1848 weight of the machine ca.: 2,2 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Speed range: 130 - 1750 rpm Table dimensions: approx. 500 x 370 mmtool taper: MK3, weight approx.: 1,200 kg, Approx. Onsite Dimension. (l x w x h): 900 x 630 x 1,900 mm

Description: Machine number: 627/3 Speed: 55 - 1450 rpm Table dimensions: 620 x 460 mm With vice Jaw width: 110 mm Drilling depth: up to 180 mmweight approx.: 300 kg, Approx. Onsite Dimension. (l x w x h): 1,100 x 700 x 1,900 mm

- mounting table: 300 x 400 mm - quill ram: 120 mm - speed range: 5800 rpm - gearbox stages: 2 - feed: 0,001 - 3,5 m/min - rapid: 3,5 m/min - taper fixture: MK 3 - thread cutting device with foot switch - coolant system - total power: 1,5 kW - weight of machine: 380 kg - space requirement (W x D x H): 0,66 x 0,44 x 1,95 m - condition: very good Details High-performance drilling machine, machine number 511 accessories documentation, coolant equipment

Box column drill Alzstar 40S 16 A 380 V Speed 160 - 2250 rpm Length 1 m Width 0.80 m Height 1.80 m Weight 270 kg Work lamp Color: White

Column drill Alzmetall

Description: Serial number : tc19 Model : AY-25-TC Power : 750 w Voltage : 230 v Manufacture year ,: 2017 R.P.M : 1400 Boring stroke : 80 mm The drill has a stroke on the top and the bottom (see photos 7 and 10 )boring stroke: 80 mm, weight approx.: 100 kg, Approx. Onsite Dimension. (l x w x h): 600 x 500 x 1,600 mm

Description: Machine number: 10930 Table dimensions: 300 x 250 mm With 2 groovesweight approx.: 300 kg, Approx. Onsite Dimension. (l x w x h): 800 x 500 x 1,900 mm

weight approx.: 2,000 kg, Approx. Onsite Dimension. (l x w x h): 1,000 x 600 x 2,000 mm

Bluthardt, VRB 6/20 Drill with coordinate table, with digital display DRO , Year of construction: 1980, very good condition, to be visited under electricity Adapter SK40, quick-change system, incl. mounts MK2, MK3, MK4 , Spindle : 45 - 900 rpm , 3,4KW, clockwise - counterclockwise, Stroke: 200mm, upper part adjustment electr. 500mm Projection : 500, Coordinate table: clamping area 600x400m, X-660, Y-450mm

Description: SPECIFICATIONS Character: Bronzework Type: 1003 Finger setter: Yes Sheet thickness: 3 mm Bending length: 1,000 mm 9 loose fingers present: Yesweight approx.: 250 kg, Approx. Onsite Dimension. (l x w x h): 1,800 x 900 x 1,700 mm

Code 99901 Description Pillar drill Make CABER Modell 58 R Serial No. Year New Table ( turnable ) 400 x 600 mm Base 540 x 640 mm Drilling capacity ( Steel 60 ) 40 mm Spindle quill 200 mm Spindle taper 4 MC Gap 400 mm Max. distance spindle – table 800 mm Max. distance spindle – base 1180 mm Spindle speeds 9 steps 90 - 1550 rpm Spindle feeds 4 steps 0,06 – 0,30 mm/rev Weight 500 kg Motor 3 kW – 380 Volt Accessoiries automatic spindle feeds Coolant Condition Unused

Code 99902 Description Pillar drill Make CABER Modell 59 R Serial No. Year New Table ( turnable ) 400 x 600 mm Base 540 x 640 mm Drilling capacity ( Steel 60 ) 50 mm Spindle quill 200 mm Spindle taper 5 MC Gap 400 mm Max. distance spindle – table 800 mm Max. distance spindle – base 1180 mm Spindle speeds 9 steps 65 - 1150 rpm Spindle feeds 4 steps 0,06 – 0,30 mm/rev Weight 500 kg Motor 3 kW – 380 Volt Accessoiries automatic spindle feeds Coolant Condition Unused

Description: Drilling capacity 13 mm Spindle taper B16 or CM2 5 Speeds 500-4500 rpm Collection on: 29/04/2024 or 30/04/2024 afternoon or 06/05/2024  ,  ,Collection times by arrangement  , IMPORTANT: Collection times may vary if separate collection times are explicitly stated in  ,in the item descriptionweight approx.: 80 kg, Approx. Onsite Dimension. (l x w x h): 450 x 630 x 1,450 mm

bore capacity in steel (diameter): 6-40 mmtable-size: 560 x 450 mm mmthroat: 330 mmturning speed range - stepless: 60-1800 U/minbore stroke: 1780 mmtotal power requirement: 3 kWweight: 1,1 tdimensions of the machine ca.: 1,2x0,8x2,5 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Control type: conventional, technical details: speed range - continuously variable 60 - 1800 rpm, table size 450 x 560 mm, coolant yes, drilling performance in steel (diameter) 6-40 mm Throat 330 mm, drilling stroke 1780 mm, total power 3 kW, weight 1.1 t, number of grooves 3 Cone holder MK 4, additional information: gear drill with thread cutting deviceweight approx.: 1,100 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 2,500 mm

: gebraucht : 2021 : 3974 : prompt, Zwischenverkauf v : Spanien : 5100 €: 1 : 1 : 32 mm: MK 3 : 250 mm: 65 - 125 - 185 - 365 - 54 U/min: 1,8/2,6 kW: M24 : 600 mm: 640 mm: 2020 mm: 260 kg: 100 mm: 85 - 635 mm: 1.170 mm: 300 x 270 mm: 600 x 380 mm: 120 mmdemo machineERLO (MADE IN SPAIN)FOR DEMANDING WORKSHOP USEgeardrive machinemanual feedleft-right drillingtable with t-slotsdepth adustable endtool ejectordrill guardCE normsuser manual in GERMAN(sample photo)OPTIONS:lighting equipment€ 231,--coolant equipment and machine base with T-slots€ 825,--reverse for tapping€ 737,--DELIVERY TIME WITH OPTIONS APPROX. 6 WEEKS.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Drill-Threader with multiple boring head Serial Number 1933/1371 Thread capacity M18 Automatic threading by master spindle OMG 4-station multi-spindle head mod VH 104 1500 - 3000 r.p.m.weight approx.: 500 kg, Approx. Onsite Dimension. (l x w x h): 500 x 1,100 x 2,500 mm

Description: Column drill Serial number 215/210 Table dimensions: 370 x 450 mm Vertical spindle travel: 200 mm 8 working speeds: 93-1420 Rpm Motor power 1.1 kW Lot 20table surface area l x w : 370x450 mm, weight approx.: 350 kg, Approx. Onsite Dimension. (l x w x h): 700 x 1,000 x 2,300 mm

Description: Column drill Table dimensions: 600 x 620 mm Vertical spindle travel: 200 mm 9 working speeds: 77-1280 Rpm Motor power 1.1 kW Reconverted to work with water Water pump included Lot 11table surface area l x w : 600x620 mm, weight approx.: 650 kg, Approx. Onsite Dimension. (l x w x h): 650 x 1,100 x 2,250 mm

Description: Column drill Table dimensions: 400 x 320 mm Spindle vertical travel: 200 mm 9 working speeds: 77-1280 Rpm Rotary table Vice includedtable surface area l x w : 400x320 mm, weight approx.: 450 kg, Approx. Onsite Dimension. (l x w x h): 650 x 1,000 x 2,250 mm

table surface area l x w : 260x200 mm, weight approx.: 400 kg, Approx. Onsite Dimension. (l x w x h): 850 x 450 x 1,600 mm

Year: ca. 1988 Wario: . tool taper: MK 2 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Continuous/standard drilling capacity (mm) 20/23 (in E335/ST60) Thread cutting capacity (depending on pitch) M12 Spindle MK II Drilling depth (mm) 100 Projection (mm) 240 Column diameter (mm) 82 Usable work surface (W x L) (mm) 340 x 280 T-slot size (arm), distance (mm), dimension width (mm) Number 2, 125, 13/26 Speed display digital Digital drilling depth display Drilling depth stop quickly adjustable stop ring Feed (mm/revolution) by hand Table height adjustment with rack Motor three-phase current 400V with frequency converter (kW) 1.5 Spindle/work surface distance (mm) 160 – 880 Machine dimensions without packaging (mm) 355 x 705 x 1825 Machine dimensions with packaging (mm) 572 x 936 x 2142 Weight (kg) 195 Standard accessories: Thread cutting device Control panel with OLED display Robust, high-quality drill head hood with ergonomically inclined front LED li ...

- Infinitely variable speed control - Quickly adjustable drilling depth stop - Thread cutting device - Undervoltage triggers - Table height adjustment via rack - LED lighting in the head - Continuous/normal drilling capacity R1: 23/25 mm - Thread cutting performance (depending on slope) R1: max.M 16x1 - Spindle MK II - Drilling depth 100 mm - Projection 260 mm - Column diameter 110 mm - Usable table surface (W x L) 420 x 340 mm - T-slot size (arm): number 2, distance 125 mm - Speed display digital - Drilling depth display digital - Drill depth stop quickly adjustable - Feed by hand - Motor three-phase current 400 V - Spindle speeds infinitely variable R1 with 20-2,000 1/min Option: Coolant device: € 525,- FACTORY WARRANTY: 3 years DELIVERY: free domicile incl. packaging NOT THE RIGHT MACHINE? WE ALSO CARRY OTHER FLOTT PRODUCTS - ASK FOR A QUOTE! FAS ...

Duration / ALB ear power 25/30 mm Thread cutting capacity Max M20 Spindle MK III Drilling depth 125 mm Throat depth 260 mm Column diameter 110 mm Usable surface [BxL] 420 x 340 mm Speed display scale Drilling depth indicator scale Drilling depth stop with fine adjustment Table height with rack and pinion Motor three-phase 400 V pole changing bar 0.90/1.45 kW Spindle speed with idle, stepless 125-4000 1 / min in 2 levels I: 125-2000 1 / min II: 250-4000 1 / min The levels change via belt apportionment Warranty: 3 years Shipping time: immediately, free loaded DELIVERY: free House including packaging NOT THE RIGHT MACHINE? WE DO ALSO OTHER AFLOAT PRODUCTS - ASK FOR A QUOTE! FLOTT BASE PARTNER .

weight approx.: 300 kg, Approx. Onsite Dimension. (l x w x h): 50 x 90 x 195 mm

S. No.: 238828

Description: Machine number: 56 Spindle speeds: 310 - 2920 rpm Table dimensions: 500 x 400 mm With 4 grooves Drilling depth: up to 120 mm Incl. lot different drill bitsweight approx.: 200 kg, Approx. Onsite Dimension. (l x w x h): 800 x 500 x 1,750 mm

taper MK: MK5 round table: ja weight of the machine ca.: 1.200 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

boring stroke: 120 mm, boring diameter: 24 mm, turning speed range: 193 - 2280 rpm, table surface area l x w : 350x350 mm, weight approx.: 150 kg, Approx. Onsite Dimension. (l x w x h): 800 x 500 x 1,800 mm

weight approx.: 250 kg, Approx. Onsite Dimension. (l x w x h): 1,000 x 900 x 2,200 mm

boring stroke: 120 mm, boring diameter: 32 mm, table surface area l x w : 380x380 mm, weight approx.: 150 kg, Approx. Onsite Dimension. (l x w x h): 800 x 500 x 1,800 mm

Description: Column drill Serial number 144B Table dimensions: 320 x 240 mm Vertical spindle travel: 130 mm 8 working speeds: 105 - 1257 Rpm Motor power 1.1 kW Lot 35table surface area l x w : 320x240 mm, weight approx.: 300 kg, Approx. Onsite Dimension. (l x w x h): 660 x 1,000 x 1,870 mm

Description: Table dimensions: approx. 315 x 245 mm With swivel table 2 speed settings: 750/1500 rpm With left and right rotary switch Stroke: 0 - 130 mmweight approx.: 1,000 kg, Approx. Onsite Dimension. (l x w x h): 1,000 x 700 x 1,820 mm

Description: Column drill Serial number 545-V Table dimensions: 300 x 270 mm Vertical spindle travel: 120 mm 16 working speeds: 75-3360 Rpm Motor power 1.1 kW Lot 6table surface area l x w : 300x270 mm, weight approx.: 300 kg, Approx. Onsite Dimension. (l x w x h): 600 x 700 x 1,950 mm

bore capacity in steel (diameter): 30 mmtool taper: MK 4 bore stroke: 225 mmthroat: 315 mmtable-size: 650 x 560 mmfeeds: o,1 bis 1,5 mm/Uspindle turning speed range: 40 - 1800 U/mintotal power requirement: 5,15 kWweight of the machine ca.: 1,0 tdimensions of the machine ca.: 1,2 x 0,8 x 2,5 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Machine number: 181 954 Drilling depth: up to 150 mm Table dimensions: 800 x 240 mmweight approx.: 500 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 2,100 mm

bore capacity in steel (diameter): 3 - 16 mm: max. 1500 mmweight: 300 kgPlease note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Serial number: 8610016 Table dimensions: approx. 355 x 355 mm Power consumption: 1.5 kW With vice Jaw width: approx. 135 mmweight approx.: 750 kg, Approx. Onsite Dimension. (l x w x h): 670 x 500 x 1,750 mm

Description: Table displacement: X= 500 mm, Y= 250 mm Excluding machine clampboring stroke: 150 mm, boring diameter: 35 mm, turning speed range: 64 - 920 rpm, table surface area l x w : 700x240 mm, weight approx.: 500 kg, Approx. Onsite Dimension. (l x w x h): 1,100 x 1,100 x 2,250 mm

bore capacity in steel (diameter): Ø 25 mmthroat: 209 mmbore stroke: 95 mmturning speeds: 12 Stufen spindle taper: MK 3 table surface area: 308x308 mmdistance spindle /table: 770 mmspindle turning speed range: 200-2440 U/mintotal power requirement: 0,75 kWweight of the machine ca.: 105 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Manufacturer number: 0707 Speed range: 100 - 1300 rpm Drilling depth: 150 M/N Table dimensions: 350 x 320 mmweight approx.: 1,000 kg, Approx. Onsite Dimension. (l x w x h): 750 x 550 x 1,950 mm

Description: 490 to 2510 rpm Table adjustable in height Voltage 230 volts Without additional accessoriesweight approx.: 40 kg, Approx. Onsite Dimension. (l x w x h): 300 x 400 x 700 mm

Key data: 16

- Table diameter: 250 mm - Adjustable height table (clamping height): 0 - 630 mm - Drill chuck: RB 18-16 L (drill diameter up to 16 mm) - Electric connection: 220 V, 50 Hz, 510 W (motor specification) - Dimensions of the stand: 0.50 x 0.30 m - Transport dimensions (HxWxD): 1.80 x 1.20 x 0.70 m (Changes and errors to technical data and prices reserved!)

bore capacity in steel (diameter): x mmbore capacity in steel (diameter): x mmthroat: x mmthroat: x mmbore stroke: x mmbore stroke: x mmPOLYHEDRAL DRILLING MACHINEDrilling range:-Square: Spanner opening 3-27mm-Hexagon: Spanner opening 3-32mmDrilling depth:-Square -14mm-Hexagon-13mmThroath150mmMisc accessoriesMore details on www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.