Manufacturer:
(Category: 101)
Multi-spindle head, drilling beam, multi-spindle drilling head, articulated multi-spindle head, row drilling machine, dowel drilling head, dowel drilling machine, drilling gear-Number: max. 3x drill-Admission: M8-right/left: rotating alternately-Distance drill: 25 mm, offset (see photo)-Number: 3 drill heads available-Price: per piece-Dimensions: 90/85/H70 mm-Weight: 1.6 kg/piece
bore capacity in steel (diameter): 15 / 18 mmthroat: 180 mmbore stroke: 80 mmturning speeds: 200 - 4000 U/min: 250 x 220 mmdistance drilling head - clamping area: max. 380 mmtotal power requirement: 1,1 / 400 kW / Voltcolumn diameter: 65 mmtool taper: MK 2 weight of the machine ca.: 0,08 tdimensions: 0,4 x 0,5 x 0,9 mprecise bench drill:- Large speed range- Programmable thread cutting- high accuracy and quality- Drill table adjustable via rack and swiveling around the column- Full engine protection- Star grip- 230 volt mains connectionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Radial drilling machine, drilling machine, boom drilling machine -Outreach: 2055 mm -Max. Distance from machine table to spindle mount: 1700 mm -Cone mount: MK5 -Motor power: 7.5 kW -Speeds: 11.2-1400 rpm -Columns: Ø 450 mm -Spindle stroke: 540 mm -Thread cutting device -automatic feed: 0.037-2.0 mm/rev -Clamping area: 920 x 1600 mm -Dimensions: 2580/1110/H3450 mm -Weight: 6465 kg
bore capacity in steel (diameter): 50 mmthroat: 360 mmbore stroke: 150 mmspindle turning speed range: 120 - 3000 U/minspindle taper: SK 40 : 650 mm: 320 mmvertical adjustment: 500 mmtable surface area: 1000 x 300 mmconnected load frequency: 400 Vdiameter of hob: max. 80 mmtotal power requirement: 2,2 kWweight of the machine ca.: 0,85 tdimensions of the machine ca.: 1,25 x 1.5 x 2,3 mNew Model Industrial Drilling and Milling Machine with Manual Transmission and High Speed Range. The prism guide in the Z-axis ensures a high degree of precision even in the most difficult milling jobs.Domestic equipments:• automatic feed in X-axis• 3-axis digital display• motorized Z-axis• Feed in quill• Left-right-run high• tapping attachment• Gear head swiveling• Coolant systemThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: ja vice: 1 quill stroke: ja : : 2.000 mmweight of the machine ca.: 790 kgstrong material: Please note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Two-spindle drilling machine, row drilling machine, drilling machine, floor drilling machine, column drilling machine, column drilling machine-spindle taper: MK2-Motor: 1.2/0.85 kW-Table size: 1175 x 355 mm-Projection: 255 mm-Speeds: 125 - 1400 rpm-Spindle stroke: 125 mm-Dimensions: 1345/960/H1900 mm-Weight: 1212 kg
Tool setting device, tool presetting device, milling cutter setting device-Presetting device for: milling tools-maximum hob diameter: 500 mm-maximum height of the milling cutter: 500 mm-Dimensions: 800/400/H1600 mm-Weight: 242 kg
bore capacity in steel (diameter): 14 /15 mmthroat: 180 mmbore stroke: 70 mmturning speeds: 420 - 2100 U/min: 250 x 220 mmdistance drilling head - clamping area: max. 380 mmtotal power requirement: 0,5/1,0 / 400 kW / Voltcolumn diameter: 65 mmtool taper: MK 2 weight of the machine ca.: 0,08 tdimensions: 0,4 x 0,5 x 0,9 mTable Drilling Machine with:variable feedTapping function.depth displayCoolant systemBelt-drivespindle protectionmachine lightThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
core boring: STIHL number: 2 Stück : 1 Stück : 4 Stück Please note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 520 mmy-travel: 400 mmz-travel: 450 mmspindle taper ISO: 40 control: TNC 360 coolant tank: ltotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: 2450x2300x3300 mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us Morethan 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Jig boring mill, fine boring mill, plate boring mill, table boring mill, boring mill, milling machine,-Table dimensions: 700 x 405 mm-Travel: Z 330 mm/Y 410 mm/X 630 mm-Quill stroke: 155 mm-Recording: MK4-Speeds: 31 - 1500 rpm-Dimensions: 1570/1800/H2600 mm-Weight: 2600 kg
Multi-spindle head, multi-spindle drill head, drilling gear-Piece multi-spindle head: 3-Spindles: 2, 3 4-Socket: Ø 20 x 28 mm-Price: complete-Dimension: see pictures-Weight: 7 kg
Morse taper sleeve, tool holder, morse taper, morse cone, taper sleeve, adapter - Adapter for the cone in the chuck of a lathe -External mount: MK5 -Number: 7x recordings available -3x recording: inside tool MK4 -4x recording: inside tool MK3 -Price per piece -Weight: about 0.6kg/pcs
Morse taper sleeve, tool holder, morse taper, morse cone, taper sleeve, adapter - Adapter for the cone in the chuck of a lathe -External mount: MK6 -Number: 6x recordings available -5x recording: inside tool MK5 -1x recording: inside tool MK3 -Price per piece -Weight: about 1.7kg/pcs
bore capacity in steel (diameter): 25 mmthroat: 185 mmbore stroke: 50 mmspindle taper: MK 3 spindle turning speed range: 50 - 2500 U/min: 178 mm: 480 mmtable surface area: 700 x 180 mmconnected load frequency: 230 Vtotal power requirement: 0,75 kWweight of the machine ca.: 160 tdimensions of the machine ca.: 0,75 x 0,8 x 0,9 mdomestic equipments• Digital depth gauge• Adjustable guides with wedges• Large 12-speed range from 75 to 3200 rpm• Smooth running due to hardened and ground gears running in an oil bath •• Right-left rotation• Prismatic guides in all axes• Gear head can be swiveled 90 °• Chip protection with safety circuitMachine base optional.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Control unit, control panel, control panel, control unit, keyboard, screen, controller, hand terminal, control unit-Manufacturer: Bierrebi LEA SRL. Control module from automatic cutting machine Bierrebi TA 103-Circuit board: LEA SRL. Type LEA 1011 2.028.01.067.01-Dimensions: 360/130/H60 mm-Weight: 1,3 kg
Control unit, control panel, control panel, control unit, keyboard, screen, controller, hand terminal, control unit-Manufacturer: Bierrebi LEA SRL. Control module from automatic cutting machine Bierrebi TA 103-Circuit board: LEA SRL. Type LEA 1000 LEA 1002 2.028.01.057.02-Dimensions: 265/125/H100 mm-Weight: 2.0 kg
Controlled cross table, cross sliding table, clamping table, clamping plate with T-slots, clamping angle, cross table NC, linear robot, coordinate table -Controlled cross table: was used as a soldering station -Manufacturer: Walko, cross table NC type PNC 500 -Table surface: 600 x 300 mm -Travel approx.: X 500 mm / Y 350 mm -Dimensions: 1050/1030/H1530 mm -Weight: 240 kg
spindle diameter: 130 mmx-travel: 3500 mmy-travel: 2050 mmz-travel: 1050 mmspindle taper ISO: 50 turning speeds: 4-1120 U/minFeed: 5-2000 mm/minbore spindle stroke: 850 mmmain drive motor: 45 kWtable surface area: 1600x2000 mmControl: Heidenhain type: TNC 426 workpiece weight: 12500 kg: 720 mmradial face slide travel: 240 mm: total power requirement: 90 kWweight of the machine ca.: 31,1 tdimensions of the machine ca.: 6,5x5x5x4 mTurntable with digital displayThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You c ...
Control unit, control panel, control panel, control unit, keyboard, screen, controller, hand terminal, control unit-Manufacturer: Bierrebi LEA SRL. Control module from automatic cutting machine Bierrebi TA 103-Circuit board: LEA SRL. Type LEA 1011 2.028.01.067.01-Dimensions: 330/125/H50 mm-Weight: 0.9 kg
Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter -Adapter for the cone in the chuck of a lathe -Outside mount: MK8 (Ø80 mm to Ø75 mm) -Number: 10x recordings available -2x holder: inside tool MK6 -6x holder: inside tool MK5 -Price: per piece
spindle diameter: 125 mmx-travel: 2360 mmy-travel: 1570 mmz-travel: 780 mmw-axis: 410 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us Morethan 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Control unit, control panel, control panel, control unit, keyboard, screen, controller, hand terminal, control unit-Manufacturer: Bierrebi LEA SRL. Control module from automatic cutting machine Bierrebi TA 103-Circuit board: LEA SRL. Type LEA 1004 2.028.01.063.02-Dimensions: 400/100/H50 mm-Weight: 0.4 kg
Control unit, control panel, control panel, control unit, keyboard, screen, controller, hand terminal, control unit-Manufacturer: Bierrebi LEA SRL. Control module from automatic cutting machine Bierrebi TA 103-Circuit board: LEA SRL. Type LEA 1020-Dimensions: 300/280/H80 mm-Weight: 3 kg
Hydraulic pump, oil pump, gear pump-Manufacturer: Garbe Lahmeyer, pump from radial drilling machine Kolb NKR 55-Type: AV15 / 15 P-Power: 0.6 kW / 1390 rpm-Dimensions: 420/280/180 mm-Weight: 24 kg
taper MK: MK5 round table: ja weight of the machine ca.: 1.200 kgPlease note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Control unit, control panel, control panel, control unit, keyboard, screen, controller, hand terminal, control unit-Manufacturer: Bierrebi LEA SRL. Control module from automatic cutting machine Bierrebi TA 103-Circuit board: LEA SRL. Type LEA 1020-Dimensions: 380/300/H130 mm-Weight: 4.3 kg
thread dia.: 12 mm: 375 U/min.working area: 180 - 2000 mmengine output: 0,7 kWweight: 28 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle diameter: 100 mmx-travel: 1250 mmy-travel: 1100 mmz-travel: 950 mmTable load: 3000 kgtable surface area: 1000x1120 mmturning speeds: 16-1250 U/minspindle taper ISO: 50 Control: Heidenhain total power requirement: kWweight of the machine ca.: 13,4 tdimensions of the machine ca.: mNo. 2022The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with M ...
Control unit, control panel, control panel, control unit, keyboard, screen, control, handheld terminal-Manufacturer: Battenfeld, control unit from injection molding machine BA-T2400-Dimensions: 380/120 / H85 mm-Weight: 1.7 kg
WMT GmbH & Co. KG
