Model
(Manufacturer: HAAS)
HAAS ST-30 CNC lathe was built in 2018 in the United States by HAAS AUTOMATION, INC. The machine on offer is an excellent choice for both unit and series production. It is capable of performing a number of complex operations, i.e. precision turning or threading of workpieces. All these machining processes are performed inside a large, fully illuminated work area by means of a powerful spindle and cutting tools. The spindle, driven by a high-powered motor, reaches a maximum speed of 3400 rpm and moves in two X,Z axes with feeds of 457 mm and 584 mm respectively. Tools taken from the 12-position turret are continuously measured and calibrated to guarantee maximum machining precision. The hydraulic tailstock, in turn, ensures precise positioning and support of the workpiece during the work cycle. The HAAS ST-30 is distinguished by its compact design, engineered with extreme rigidity and ...
HAAS ST-30 CNC turning center was built in 2013 in the United States by HAAS AUTOMATION, INC. The machine, distinguished by its high reliability and precision, is perfect for both unit and series production. It is capable of performing a number of complex operations, such as precision turning or threading of workpieces. All these machining processes are performed inside a large, fully illuminated work area by means of a powerful spindle and cutting tools. The spindle, driven by a high-powered motor, rotates at a maximum speed of 2400 rpm and moves in two X,Z axes with feeds of 457 mm and 584 mm respectively. To guarantee maximum machining precision, each tool taken from the 12-position turret is continuously measured and calibrated by a measuring probe. The hydraulic tailstock, in turn, ensures precise positioning and support of the workpiece during the work cycle. The HAAS ST-30 feat ...
Key data: 750 mm, 400 mm, 500 mm
Inv. Num. : 8792 Type: Mikron VCE 750 Producer: HAAS Created: 1997 Parameters: Control system: HAAS Work table length: 914 mm Work table width: 350 mm Maximum vertical spindle speed: 7500 1/min X-axis travel: 750 mm Y-axis travel: 400 mm Travel Z axis: 500 mm Cone: SK 40 Number of all tools: 20 pieces Equipment: 4. Axis 2023: Replacement of the manual gearbox of the tool changer Replacement of the tool plate magazine
Key data: 762 mm, 508 mm, 508 mm
5-Axis CNC Vertical Machining Center Haas UMC 750 Year of construction 2019 Haas CNC 2-axis NC swivel rotary table Table diameter Ø 500 mm Table load max. 300 kg. C-axis 360° B-axis +120°/-35° X 762 mm Y 508 mm Z 508 mm Spindle holder ISO 40 Spindle drive power 22.4 kW Spindle speed max. 12,000 rpm Tool holder ISO 40 31 tool magazine positions Offer number MV-6495
Inv. Num. : 9047 Type: VF 0 Producer: HAAS Created: 2001 Parameters: Work table length: 660 mm Work table width: 356 mm Maximum table load (uniform): 1361 kg Maximum vertical spindle speed: 7500 1/min X-axis travel: 508 mm Y-axis travel: 406 mm Travel Z-axis: 508 mm Machine weight: 3630 kg
The machine is in good technical condition, testing is possible after prior agreement. The machine is mechanically worn (play in the table axes approx. 0.1 mm). The gearbox is currently not shifting (when trying to change gear, there is no signal about shifting).
The machine is in good technical condition, testing is possible by prior arrangement.
Haas UHS 1980 FL Universal Hand Lever Flat Grinder - Tip height 125 mm - Center width 450 mm (optional up to 600 mm) - Grinding length 350 mm - Table clamping area 800 x 115 mm - Max. workpiece weight: approx. 40 kg - Longitudinal movement (X-axis) 350 mm - Transverse movement (Y-axis) 180 mm - Height adjustment (Z-axis) 250 mm - Swivel (horizontal) 360° - Tiltability (vertical) ± 15° to 20° - Spindle speeds 2,800 / 5,600 rpm (gradual) - Drive power 0.75 kW - 1.1 kW - Grinding wheel holder cone 1:10 (standard) - Connection 400 V / 50 Hz - Magnet LxW 255 x 150 mm LxWxH 0.9x1.0x1.4 meters / Weight 650 kg
The machine is in very good technical condition, testing is possible by prior arrangement.
used
Key data: 762 mm, 508 mm, 508 mm
2023 HAAS UMC-750SS 5-Axis CNC Vertical Machining Center Condition: Used Location: USA Description This 2023 HAAS UMC-750SS is in excellent condition and ready for continued productive service. The machine has been well maintained and represents a strong opportunity for high-speed 5-axis machining. Specifications have been compiled from inspection, operator input, manuals, and OEM sources. Buyers are encouraged to independently verify all specifications, condition details, and availability prior to purchase. Price, location, and specifications are subject to change. Specifications Travels • X-Axis: 30” (762 mm) • Y-Axis: 20” (508 mm) • Z-Axis: 20” (508 mm) • Number of Axes: 5 Spindle • Power: 30 HP (22.4 kW) • Max Speed: 15,000 RPM • Taper: CT40 or BT40 Tool Changer • ATC Capacity: 40 tools Table • Table Width: 19.7 ...
Key data: 762 mm, 508 mm, 508 mm
Inv. Num. : 8969 Type: UMC 750 Producer: HAAS Created: 2020 Parameters: Switch-on hours: 8496 h Hours: 6185 h Table diameter: 500 mm Maximum table load (even): 300 kg Spindle drive power: 22.4 kW Maximum spindle speed: 8100 1/min X-axis travel: 762 mm Y-axis travel: 508 mm Travel Z-axis: 508 mm
Key data: 762 , 508 , 508
HAAS UMC-750SS Machining Center TECHNICAL FEATURES: Year: 2019 Number of continuous axes: 5 X-axis stroke: 762 [mm] Y-axis travel: 508 [mm] Z-axis travel: 508 [mm] C-axis angular travel: 360 [°] Table dimensions: Ø630 x 500 [mm] Maximum weight Tabletop Allowance: 300 [Kg] B-axis angular travel: +110 [°] / 350 [°] Pin Attachment: CT 40 Maximum speed Spindle: 15000 [rpm] Spindle power: 22.4 [kW] Number of tool magazine stations: 40 Capacity of the garden tray: 284 [l] Number of hours in operation: 5277 [h] EQUIPMENT INCLUDED: x1 Center-Spindle Watering x1 High Pressure Coolant Pump 21 [bar] x1 RENISHAW Wireless Coin Probe x1 Calibration Sphere x1 RENISHAW Tool Probe x1 HAAS Oil Mist Vacuum x1 HAAS offset crank x1 HENNIG Chip Conveyor Type 101435 Machine visible under tension for testing at our premises, by appointment. Price excl. VAT on request, ...
Key data: 1270 mm, 508 mm, 635 mm
Haas VF-4DHE CNC Vertical Machining Center CNC Control Haas CNC Table size 1,321 x 457 mm Table load 1,588 kg Number of pallets: 1 x X-axis travel 1,270 mm Y-axis travel 508 mm Travel Z-axis 635 mm Spindle holder MAS BT40 Spindle speed 40 - 8,100 1/min Spindle motor 22.4 kW Magazine capacity 24 + 1 If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail. Feel free to check out our other ads for a full overview of our stock.
Inv. Num. : 8856 Type: SL-10 THE Producer: HAAS Created: 2006 Parameters: Switch-on hours: 23550 h Hours: 13463 h Maximum turning length: 355 mm Maximum turning diameter: 279 mm Maximum turning diameter over bed: 252 mm Maximum turning diameter over support: 203 mm Maximum length of travel in the X-axis: 159 mm Max. travel length of the Z-axis: 356 mm Maximum spindle speed: 6000 1/min Weight: 2500 kg Equipment: Collet chuck Universal chuck
HAAS ST-20Y CNC lathe was built in 2022 in the United States by Haas Automation Inc. The machine has only worked for 119 hours to date and is like brand new. The HAAS ST-20Y is an excellent choice for the modern business. This is because it makes it possible to perform versatile 4-axis machining of the highest quality on any workpiece. All machining processes, i.e. milling, threading and drilling are performed by means of driven tools and a spindle with synchronised C axis. The 12-position BMT turret offers high productivity thanks to the larger contact area between tooling, toolholder and the turret itself. The operator, on the other hand, has at their disposal an advanced HAAS CNC control with a Visual Programming System (VPS), which significantly improves the daily operation of the machine. The VPS uses graphical templates to facilitate the creation of G-codes for even the most ...
Inv. Num. : 8854 Type: MINIMILL HE Producer: HAAS Created: 2006 Parameters: Control system: HAAS Work table length: 914 mm Work table width: 305 mm Maximum table load (uniform): 227 kg Spindle drive power: 7.5 kW Maximum vertical spindle speed: 6000 1/min X-axis travel: 406 mm Y-axis travel: 326 mm Z-axis travel: 381 mm Cone: ISO 40 Number of all tools: 10 pieces Machine height: 2565 mm Machine length: 2119 mm Machine width: 2077 mm Machine weight: 2018 kg
Vertical Machining Center MINIMILL HE - travel X (mm) : 406 - travel Y (mm) : 356 - travel Z (mm) : 381
The machine is in good technical condition, after prior agreement it is possible to test it. 620 hours as new.
Dehairing machine Manufacturer: HAAS Stainless steel Engine: 2.2kW
HAAS ST-15 CNC lathe was built in 2020 in the United States by HAAS AUTOMATION, INC. This highly efficient machine with a compact design is an excellent choice for both unit and series production. Workpieces with a maximum length of 406 mm are machined inside a large workspace by means of a high-speed spindle and precision cutting tools, taken from a 12-position turret. All this is complemented by intelligent CNC control, in which advanced machining programmes are created in just a few steps. The HAAS ST15 CNC turning center weighs 3584 kg. Technical specifications of the HAAS ST-15 metal lathe - CNC controller: HAAS - swing over over bed: 419 mm - bar diameter: 64 mm - maximum turning length: 406 mm - feed in the X/Z axis: 200/406 mm - rapid traverse in the X,Z axis: 30.5 m/min - thrust force in the X,Z axis: 14679 N - maximum spindle rotational speed: 4000 rpm - maximum spi ...
HAAS DS-30 CNC lathe was built in 2013 in the United States by HAAS AUTOMATION, INC. The machine, designed for machining workpieces with a maximum diameter of 457 mm, offers excellent efficiency, reliability and precision. Inside a large workspace there are two spindles with a C-axis, which enable the machining of both sides of a workpiece in a single work cycle. The tool head, in turn, allows for the attachment of both fixed and driven tools. This solution increases the flexibility of the machine by enabling it to be adapted to specific production needs. All this is complemented by advanced CNC control with many useful functions. The HAAS DS30 CNC turning center weighs 7221 kg. Technical specifications of the HAAS DS-30 metal lathe - maximum turning diameter: 457 mm - maximum turning length: 660 mm - swing over bed: 806 mm - swing over cross slide: 527 mm - feed in the X/Z axis: ...
HAAS ST-10 CNC turning center was built in 2015 in the United States by HAAS AUTOMATION, INC. The machine, distinguished by its compact design and increased production cycle efficiency, is an excellent choice for both unit and series production. Workpieces with a maximum diameter of 356 mm are machined inside a large work space by means of a high-speed spindle and precision cutting tools taken from a 12-position turret. All this is complemented by intuitive CNC control with many useful functions. The HAAS ST10 CNC lathe weighs approximately 3600 kg. Technical specifications of the HAAS ST-10 metal lathe - CNC controller: HAAS - maximum turning diameter: 356 mm - maximum turning length: 356 mm - bar diameter: 44 mm - swing over tailstock: 597 mm - swing over cross slide: 413 mm - feed in the X/Z axis: 200/356 mm - rapid traverse in the X,Z axes: 30.5 m/min - maximum spindle ro ...
HAAS SL-20 THE CNC turning center was manufactured in 2008 in the United States by HAAS AUTOMATION, INC. The machine, designed for machining workpieces with a maximum diameter of 262 mm, offers an excellent combination of functionality, productivity and precision. Its extensive equipment includes e.g. a tool probe, an advanced CNC control and a C-axis for machining complex shapes. Over its entire service life, the SL-20 THE CNC lathe has worked for a total of 9586 hours. Technical specifications of the HAAS SL-20 THE lathe - maximum turning diameter: 262 mm - maximum turning length: 508 mm - maximum turning length between centers: 610 mm - maximum spindle rotational speed: 4000 rpm - spindle bore: 52 mm - spindle drive power: 15 kW - lathe chuck diameter: 210 mm - operating hours: 9586 h - power supply of the HAAS SL20 THE machine: 3x 360-480 V; 50/60 Hz Equipment of the H ...
Key data: 762 mm, 406 mm, 506 mm
CNC Vertical Machining Center CNC Control Haas CNC Table size 914 x 356 mm Table load 680 kg Number of pallets: 1 x X-axis travel 762 mm Y-axis travel 406 mm Travel Z-axis 508 mm Spindle holder DIN 68971A Spindle speed 12,000 1/min Spindle motor 22.4 kW Magazine capacity 24 + 1 If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail. Feel free to check out our other ads for a full overview of our stock.
Inv. Num. : 8550 Type: VF-3 Producer: HAAS Created: 2017 Parameters: Control system: HAAS Work table length: 1219 mm Work table width: 457 mm Maximum table load (uniform): 1588 kg Spindle drive power: 22.4 kW Speed: 8100 1/min X-axis travel: 1016 mm Y-axis travel: 508 mm Z-axis travel: 635 mm Cone: BT 40 Machine weight: 5316 kg
Electrically heated process vessel capacity 90 litres Filling device Manufacturer: Haas Type FMSX composed of: Electrically heated agitator tank with a capacity of approx. 90 litres Heated Mouvex piston pump, electric heater, control cabinet with Siemens PLC and FU for pump and agitator, in a mobile stainless steel frame.
The machine is in good technical condition, a test run is possible by prior arrangement.
HAAS VF-1 CNC machining center was built in 2015 in the United States by HAAS AUTOMATION, INC. The machine, designed for unit and small batch production, is the ideal choice for any tool workshop. All this is due to the use of a number of modern components with excellent technical parameters, which guarantee high reliability and precise machining. Workpieces weighing a maximum of 1361 kg are machined inside a large, fully illuminated work area by means of a high-speed spindle and tools taken from a 20-position magazine. The machining process is free of vibration or oscillation, thanks to an extremely stable design made from top-quality steel. All this is complemented by an intelligent CNC control with an intuitive interface. The HAAS VF1 milling center weighs 3539 kg. It is also possible to purchase additional tooling shown in the photos (tool holders, vices, TSCHORN 3D tester, measur ...
Key data: 400 mm, 800 mm
Machine Details Stock-No. 1105-03588 Type of machine CNC Lathe - Inclined Bed Type Make HAAS Type DS 30 Y Year of manufacture 2018 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Delivery time short-term Freight basis ex works Technical details turning diameter 762 mm turning length 800 mm control Haas Chucking diameter 254 mm Hollow 76 mm swing diameter 762 mm turning speeds 3400 rpm output 407 Nm Power 22 KW Tool changer 12 VDI 40 transmission ratio 2 weight of the machine approx. 7.3 T t dimensions of the machine approx. 3.3 X 2 X 1.9 H m Additional information with manual guide (HAAS control) WIT C AXIS AND Y AXIS +LIVE TOOLS CHIP CONVOYER SUP SPINDLE
HAAS VF-0 Vertical Machining Center YOM 1998 Table 660x356 mm X/Y/Z 508/406/508 mm Spindle speed 0-7500rpm Spindle motor 14.9kW Rapid feed rate 18m/min Tool Capacity 20 Max. part weight 340.3 kg Spindle taper BT40 Machine Weight 3175Kg Remark: The machine had worked small parts in the production of hunting and sporting rifles. Mechanically OK, Defective a cirquit board
