Controlled Axes 4 axes (X, Y, Z, and electrospindle continuous rotation A-axis) Axis Strokes X-axis (Longitudinal): 7,700 mm Y-axis (Cross): 270 mm Z-axis (Vertical): 420 mm A-Axis Travel 0° to 180° continuous rotation (allows machining on 3 sides directly, up to 5 sides with angular units) Working Modes Single-piece (up to 7.7 m), multi-piece, and pendular/dynamic pendular (two independent work zones) Electrospindle Power 7.0 kW (S1 continuous duty) Spindle Speed Up to 16,500 RPM Tool Holder / Cone HSK-50F Tool Magazine 8-slot automatic tool changer mounted directly on the X-axis carriage Tool Compatibility Accommodates milling bits, 1 angular unit, and saw/disc blades up to Ø 180 mm
Key data: 500 mm
Max. saw blade diameter: 500 mm Automatic positioning of length and angle (90° or 45°), intermediate mitres adjustable from the front Moving roller conveyor Material support pneumatically folds up Minimum quantity spraying device USB Port Instruction manual Weight: 1400 kg
Under-table cross-cut saw Emmegi type Calvet 300 M Technical data: with automatic stop Fence pushes the material to the cutting position after entering dimensions Saw blade: coming from below Saw blade diameter max. (mm): 300 Right long table: with automatically movable stop Table length (mm): 3200 Table width (mm): 120 Roller conveyor left: roller conveyor length - 3550 mm, roller conveyor width - 310 mm Roll width (mm): 240 Roller conveyor and stop table: not separable Machine weight (kg): 80 without pictured suction
Max. saw blade diameter: 550 mm Hydropneumatic saw blade feed via 2 hand control Pneumatic material tensioners Minimum quantity spraying device Table can be rotated on both sides with detent points at 45° Roller conveyor and stops on request
Max. cutting length: 5,000 mm Max. saw blade diameter: 400 mm Digital length display Minimum quantity spraying device Pneumatic material tensioners Mitre cuts possible on both sides 2-hand operation
Saw blade diameter: 300 mm Manual material tensioner Minimum quantity spraying device 120 kg
Rollable chip extraction for aluminium or PVC For double mitre saws or single-head saws
Key data: 500 mm
Max. saw length: 5,000 mm Max. saw blade diameter: 500 mm Automatic positioning of the length as well as motorized angle adjustment inwards and outwards Moving roller conveyor Material support Minimum quantity spraying device Weight: 1800 kg
Max. saw length: 5000 mm Max. saw blade diameter: 450 mm Automatic positioning of length and angle (90° or 45°) Moving roller conveyor Material support Minimum quantity spraying device
Key data: 550 mm
Five Axis CNC Controlled Dual Head Double Miter Circular Sawing Machine with Loading and Unloading Device Maximum section length with two saw heads at the same time - 6,000 mm Maximum saw blade diameter Ø 550 mm Infinitely programmable mitre angle adjustment - 15° / 90° / + 45° Saw blade drive power 2 x 2.64 kW Dimensions approx. 11.3 m x 2 m x H 2 m (with closed safety doors)
Lenght 5m Options: Load&unload VIRTUAL AXIS FOR CUTTING UNITS INCLINATION PROFILE CLAMPING LABEL PRINTER
4 Axes CNC Machining Center for working of bars of aluminium, PVC, light alloys in general and steel pieces up to 2 mm X AXIS (longitudinal) (mm) 4.000 Y AXIS (transversal) (mm) 270 Z AXIS (vertical) (mm) 420 A AXIS (electrospindle rotation) 0° ÷ 180°
Max blade diameter: 450 mm Weight: approx. 700 kg Hydropneumatic saw blade feed via 2 manual operation Pneumatic material tensioners Minimum quantity spraying device Table rotatable on both sides with rest points at 45°
saw blade diameter: - mm cutting diameter: - mm stroke: - mm total power requirement: - kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
This 3-axis Emmegi Phantomatic T3 was manufactured in 2011. It features a power rating of 7.5 kW and operates at a voltage of 400/3 V. With a machine weight of 1950 kg, it is designed for durability and efficiency. If you are looking to get high-quality machining capabilities, consider the Emmegi Phantomatic T3 vertical machining centre we have for sale. Contact us for further details.
saw blade diameter: 550 mm Under-table saw for aluminum and PVC Hydropneumatic saw blade feed Two-hand operation Minimum-quantity lubrication system Table rotates on both sides, with locking positions at +/-45° and +/-60° Mitre cuts up to 60° on both sides Full protective guard very good condition! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The EMMEGI wood and aluminium cross-cut saw is designed for cutting to length and mitre cuts: swivelling Technical data: Motor: 0.55 kW / 220 V Cutting height: approx. 50 mm Cutting depth: approx. 80 mm Condition: Gebraucht Location: Tauberbischofsheim, Germany
saw blade diameter: 450 mm cutting diameter: 150 mm cutting lenght max.: 1000 mm weight of the machine ca.: 1.35 t dimensions of the machine ca.: 2.7 x 1.5 x 1.65 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
This Emmegi Luna 450 TU/5 Circular Metal Saw was manufactured in 2008. It features a saw blade diameter of 450 mm and a spindle diameter of 32 mm. The saw blade motor operates at 2.2 kW with a speed of 2800 rpm. It supports cutting lengths from 310 mm to 5000 mm and has a weight of 1400 kg. Dimensions are 9400x1400x1838H. Contact us for more information about this machine.
This Emmegi VEGAMATIC was manufactured in 2008. It is an automatic cutting centre for aluminium profiles, featuring a feeder travel of 7395 mm and feed speed up to 60 m/min. The blade rotation angle ranges from -45° to +45°, with a standard blade diameter of 500 mm. Ideal for precise large-scale cutting tasks. Contact us for more information about this machine.
A double mitre saw Emmegi (Pressta Eisele) is available. Saw blade diameter: 500mm, saw heads: 2, saw head swivelling range: 90°-45°, cutting length range: 250mm-5000mm, max. cutting height: 350mm, max. cutting width: 160mm. Machine dimensions X/Y/Z: approx. 5750mm/1250mm/1700mm, weight: approx. 1250kg. Documentation available. An on-site inspection is possible.
