Technical details & equipment: Speed range: 20 – 5,000 rpm Table dimensions: 800 x 400 mm X-axis travel range: 600 mm Y-axis travel range: 350 mm Z-axis travel range: 600 mm Table load: 300 kg Tool Changer: Equipped with two tool turrets, each with 12 places. Accessories: Chip conveyor included. Company history: The machine ran in gentle single-shift operation. Condition: The machine has been dry and protected in a closed room for 15 years. Due to the long service life, damage to the stand cannot be ruled out. Known defect: The position detection of the tool turrets is currently without function and needs to be repaired (presumably repair of the corresponding card required). With manageable effort, the machine can be restored to a very good operating condition. Important notes: The sale is made as a used machine to self-collectors. All information has been ...
Key data: 6 mm, 350 mm, 1
Refurbished 2005 Number of Spindles: 2 Drilling capacity/spindle, steel: 1-6 mm Drilling depth: max. 350 mm Travel Z: 350 mm Travel W: 350 mm Drive power/spindle - 100% ED 3.7 kW - 50% ED 5.5 kW Spindle speed: 3,000 - 27,000 1/min Spindle holder: Ø 10 - 60 mm Coolant pressure: max. 150 bar Coolant flow: 48 l/min Coolant quantity: 1,000 l
High Speed Bench Drill, Made in Germany -Clamping table: 290 x 225 mm -Travel distance: 150 mm with hand crank -Spindle mount: Drill chuck included -Drilling capacity in steel D 1 - 6 mm -Projection: 180 mm -Speeds: 900 - 10,000 rpm 8 steps -Column: Diameter 75 mm -Spindle stroke: 60 mm, with fine stop -Voltage: 380 V -Dimensions: 640/330/H740 mm -Weight: 92 kg
Drilling capacity steel/GG: 23 mm Spindle holder: 3 MK Projection: 275 mm Table size: 300 x 400 mm Quill stroke: 90 mm Spindle speeds: 100 - 1180 rpm Feeds: 0.1/0.6/0.25 mm Drive motor: 380 V, 1.25/2.15 kW Dimensions: 850 x 400 x 1770 mm Weight: 280 kg
used
Max Drilling diameter : 46 mm Max Drilling depth: 1000 mm Table dimensions: 1200 x 700 mm x mm Spindle speed 4000 rpm Spindle power: 7.5 kw
High performance column boring machine Technical data: - Drilling capacity in steel ST 60 32 mm - Thread cutting device up to M 20 - Drilling spindle holder MK 3 - Feeds 0.1 + 0.2 + 0.3 mm/U - Drilling spindle stroke 150 mm - 12 drilling spindle speeds 80 - 1400 rpm - Extension 280 mm - max distance table - drilling spindle 760 mm - Table with 2 T-slots 550 x 400 mm - Height adjustable via rack with hand crank - Drive 400 V / 1.4 / 2.3 kW - Space requirement approx. W 550 x H 1950 x D 850 mm - Weight approx. 360 kg - with: - coolant device - Quick-release drilling chuck - 20 pcs. HSS div. Drill 8 - 25 mm
Technical data: -Drilling capacity approx. 30 mm - spindle mount MT 3 -Spindle speeds in 2 steps continuously variable 80-1400 RPM -Table surface 390 x 420 mm -Drill unit by hand crank height adjustment -min / max distance table / spindle 220 / 580 mm -Drilling spindle stroke 150 mm -Spindle projection powered 280 mm â 400 V / 1.3 / 2.3 kW -Space requirement approx. B 480 x H 880 - H 1200 X 1050 mm -Weight approx. 250 kg -Table base with storage space B 600 x h. 910 x H 800 mm -Weight 200 kg
Table drilling machine Ixion without base from a training workshop Type BT15STP stepless speed control via PIV gearbox Hoehen adjustment via rack, Speeds from 200rpm to 3,600rpm Flott Alzmetall Maxion Gillardon Special price
IXION TL 600 NC 1 ist eine Tieflochbohrmaschine, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Arbeitskapazitäten: Bohrtiefe max. 600 mm, bis Ø 18 mm, Spindelhub 600 mm, Tisch 1375×700 mm drehbar 360°, Tragfähigkeit 2000 kg, Verfahrwege X 700 mm, Y 500 mm. Technische Daten: Spindeldrehzahl bis 4000 1/min, Werkzeugaufnahme SK40, Spindelmotor 2,3 kW, Anschluss 50 Hz 3x380 V, Gewicht ca. 2800 kg, Maße L4500×B1800×H2700 mm. Zubehör: Bohrfutter, Bohrfutter mit Innenkühlung, Digitalanzeige 2 Achsen, Kühlmitteleinrichtung. Erreicht enge Toleranzen; typische Branchen: Automobil, Luftfahrt, Medizintechnik, Uhrenbau, Werkzeugbau. Technische Daten ohne Gewähr
IXION TL 500 SVA ist eine Tischbohrmaschine, ausgelegt auf Präzision, hohe Genauigkeit und Zuverlässigkeit bei Bohrarbeiten. Bohrtiefe max. 480 mm; Tisch 650×410 mm; Spindelaufnahme 2 CM; 8 Stufen von 240 t/min bis 2400 t/min. Maschinengewicht ca. 680 kg; Abmessungen L1190×B2440×H1600 mm. Ermöglicht enge Toleranzen; geeignet für Automotive, Uhrmacherei, Werkzeugmaschinenbau, Luftfahrt und Medizintechnik Technische Daten ohne Gewähr
number of spindles: 25 -1500 U/min Stufenlos bore capacity in steel (diameter): 23 mm bore stroke: 120 mm table clamping surface:: 1250 x 340 mm taper MK: MK3 total power requirement: 2 kW weight of the machine ca.: 0,4 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 32.0 mm bore capacity in cast iron: 36.0 mm throat: 280 mm bore stroke: 150 mm turning speeds: 80 - 1400 U/min table-size: 400 x 550 mm morse taper: MK 3 feed: 0.1-0.2-0.3 mm/U total power requirement: 1.1 / 2.0 kW weight of the machine ca.: 350 kg range L-W-H: 800 x 600 x 1900 mm Furnishing : - Column drilling machine - Drive: V-belt - automatic spindle feed (0.1/0.2/0.3 mm/rev) - Pole-changing drive motor - Work table with T-slots - Height adjustable via hand crank - machined base plate with T-slots - adjustable drilling depth stop - Connection cable + 16A plug Machine link: https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=100 8-9103736 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 40 mm throat: 300 mm bore stroke: 170 mm : 4 speeds: 70 - 1400 U/min table-size: 600 x 450 mm total power requirement: 3,0 kW weight: 350 kg dimensions: 1200 x 800 x 2150 mm Features: - Automatic feed - Coolant device - Infinitely variable speed control - Adjustable fixed depth stop - Drill chuck The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 15 mm throat: 215 mm bore stroke: mm turning speeds: 200 - 3600 U/min : 350 x 300 mm total power requirement: 1,0 kW / Volt tool taper: MK 2 weight of the machine ca.: 320 Kg dimensions: 0,8 x 0,6 x 1,9 mm Bench drill - Base unit with drawers The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 3 - 16 mm : max. 1500 mm weight: 300 kg Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 15 mm throat: 220 mm bore stroke: 80 mm : 2 speeds: 320 - 1600 U/min table-size: 350 x 285 mm weight: 125 kg dimensions: 700 x 600 x 1500 mm Features: - Microdosing - Thread cutting M2-10 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
This 6-axis IXION AUERBACH IA2 TLF-1200.4 drilling machine was manufactured in 2004. It features an impressive X-axis travel of 1,200 mm, Y-axis travel of 1,200 mm, and Z-axis travel of 700 mm. The machine includes a robust rotary table surface of 1,000 x 1,000 mm and a maximum workpiece weight capacity of 7,000 kg. If you are looking to get high-quality drilling capabilities, consider the IXION AUERBACH IA2 TLF-1200.4 machine we have for sale. Contact us for further details.
Twin-spindle drilling machine, row drilling machine, drilling machine, bench drilling machine, pillar drilling machine -Spindle mount: B10 -Table size: 770 x 300 mm -max. intermediate dimension: mm -Protrusion: 200 mm -Speeds: 250-4000/365-4150 rpm -Spindle stroke: 100 mm -Dimensions: 960/970/H1600 mm -Weight: 512 kg
A bench drilling and tapping machine Ixion including automatic rapid traverse is available. Drilling capacity steel/cast iron: 15mm/14mm, tapping capacity: M3-M10, spindle mount: MK2, quill stroke: 90mm, reach: 215mm, column diameter: 75mm, speed: 1600rpm, table dimensions X/Y: approx. 220mm/285mm, weight: approx. 100kg. An on-site inspection is possible.
taper MK: 2 Dimensions (L/W/H): 800 x 400 x 1500 mm weight: 300 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 23 mm throat: 220 mm bore stroke: 120 mm Number of revolutions: 25 - 3.200 U/min distance Spindlenose and center of table: 275 mm table surface area: 300 x 355 mm T-slots: 3x T - slots distance: 120 mm column diameter: 110 mm total power requirement: - kW weight of the machine ca.: ca. 120 kg dimensions of the machine ca.: 0,8 x 1,0 x 1,9 m Table Drilling Machine IXION - BT 23 ST - incl. base cabinet The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
drilling diameter: 18 min drilling capacity diameter max.: 15 mm bore depth: 90 mm throat: 215 mm spindle: bis 360 mm spindle: 560 mm table plate: 350 x 290 mm column diameter: 75 mm Total height: max. 1050 mm weight: ca. 100 kg spindle turning speed - stepless: 100 - 1800 U/min motor speeds:: 700 / 1400 U/min Pole-changing motor The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Table, Drilling and Tapping Machine IXION Type BT 15 GLMasch. No. Year of construction approx. 1975Drilling capacity 15 mmSpindle holder Cone holder B 16Threading from M 2.5 to M10Throat depth 200 mmPine stroke 90 mmTable size 285 x 220 mmColumn diameter 75 mmSpindle speed 320 - 1600 rpm. 4 stagesMotor power 0.55 kWNet connection 380 volts, 50 Hz- Spindle speed via 4 V-belt steps- equipped with FAHRION GH 10 tapping chuck- with guide cartridge for the thread pitch, operation without
Tischbohrmaschine / Drilling machine IXION BST 13 Baujahr / Year 1971 - Serial-No. 37919 Technical Details: Abmessungen / Dimensions 220 x 400 x 820mm Gewicht / Weight 50kgs Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
table surface area: 170 x 170 mm base plate surface area: 170 x 170 mm throat: 185 mm quill stroke: 65 mm spindle turning speed range: 500 / 896 / 1473 / 2428 U/min column diameter: 65 mm total power requirement: 0,37 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 23 / 28 mm throat: 260 mm bore stroke: 120 mm tool taper: MK 3 table-size: 500 x 350 mm column diameter: 100 mm total power requirement: 1,3 kW weight of the machine ca.: 400 kg dimensions of the machine ca.: 800 x 600 x 1750 mm Defective feed! Right-left rotation stepless speed adjustment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
