Manufacturer:
The distance indication is not possible, because your location could not be determined. Prerequisite is that your browser allows cookies and location determination.
boring mills and machining centers / Radial Drilling Machines
date: 22.06.2024 add to watchlist
approved
dealer
item-No.: 164321938
New in: 1996

used

check Seller: FEYEN Maschinen GmbH
Location: Lager Krefeld

add to watchlist

bore capacity in steel (diameter): 40 mmarm length: 1400 mmworkpiece height max.: 900 mmturning speed range: 56 - 2500 U/minfeeds: 0,15-0,2-0,3-0,36 mm/Ubore capacity in cast iron: 50 mmthread capacity: M 30 in Stahl main drive: 3 kWstroke drive: 0,75 kWvoltage: 380 V / 50 Hztotal power requirement: 3,75 kWweight of the machine ca.: 1,75 tdimensions of the machine ca.: 2,5 x 1,0 x 2,6 m• cube table 560 x 460 x 500 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

boring mills and machining centers / Radial Drilling Machines
date: 07.01.2024 add to watchlist
approved
dealer
item-No.: 144954548

used

check Seller: Maschinenservice
Location: Land-de
Price: 2.350 € add to watchlist

Morse cone MK 3 Drilling performance: Steel 28 mm Casting 32 mm Ihivikt Extension 700mm 3 Pre-shed0.1 - 0.2 - 0.3 mm/U 15 Spindle speeds 50 - 1220 rpm Spindle stroke 165mm max. distance spindle - base plate 1300 mm max distance spindle clamping block approx. 800mm Dimensions clamping cube 470mm550mm500mm high Clamping area foot 870700mm Hoe adjustment boom approx. 620 mm Spindle motor 1.1 / 1.7 kW Lifting motor 0.55 kW Outside mass: Length 1400 mm; width 700 mm; height 2300 mm Weight approx. 1100 kg

boring mills and machining centers / Radial Drilling Machines
date: 24.01.2024 add to watchlist
approved
dealer
item-No.: 163206508
New in: 2001

used

check Seller: Weber Werkzeugmaschinen GbR
Location: 87719 Mindelheim Land-de

add to watchlist

Specifications: Tool holder: MK 4 Drilling capacity in ST 60: ø 25 mm Drilling capacity in cast iron GG 20: ø32 mm Tapping performance in ST 60: M24 Tapping capacity GG20: M30 Speed range: (12) 102 - 2000 1/min Spindle stroke: 150 mm Feeds: 0.1 / 0.2 / 0.3 mm/rev Table size: 1175 x 525 mm Column diameter: 170 mm Motor power: 1.1 / 1.5 kW Connection: 400 V Weight, approx.: 2200 kg Dimensions (WxDxH), approx.: 1300 x 1620 x 2270 mm Equipment: - Machined foot with T-slots - Feed device - R- L- Barrel - Tapping device - Emergency stop push button -Chuck -Vice - Machine wedge shoes - Swivel machine table - Dice table - Base plate with T-slots - Machine lamp

boring mills and machining centers / Radial Drilling Machines
date: 02.04.2024 add to watchlist
approved
dealer
item-No.: 163708761
New in: 1975

used

Location: Land-de

add to watchlist

Machine Type: Radial Drilling Machine Manufacturer: ARBOGA Model: ER 830 Year of construction: 1975 Condition: good Offer Type: Used Machine Specifications: Drilling diameter: 35 mm Drilling depth: 175 mm Speed range: 80 – 890 rpm. Spindle mount: MK4 Projection: 1060 mm Propulsion: 1.1 / 1.4 kW Remark: automatic feed tapping device, dice table, coolant device, heavy drill vice, 4 machine feet, quick-release chucks, Storage table Weight: 1500 kg The machine is in good condition and ready for immediate use and can be viewed and demonstrated by us. We would be pleased if you are interested in our offer. Errors, modifications and prior sale excepted.

boring mills and machining centers / Radial Drilling Machines
date: 12.04.2024 add to watchlist
approved
dealer
item-No.: 160753502

used

check Seller: RBN vormals Bauma Tränkle
Location: 97786 Motten OT Kothen Land-de

add to watchlist

Radial drill Manufacturer: Archdahle

boring mills and machining centers / Radial Drilling Machines
date: 22.06.2024 add to watchlist
approved
dealer
item-No.: 161266649

used

check Seller: APT
Location: Deinze Land-be

add to watchlist

Arlo Mk5 - 2050Admission in drilling-spindle (morse): Mk5 Max drilling capacity: 63 mm Base dimensions (1) Table dim (2) : 2900 x 1250 x 250 mm Height-travel arm (Y-axis): 1200 mm Min dist. round column--drillingsp (X-axis): 450 mm Max dist.round column -- drillingspindle: 2050 mm Max drilling-depth: 400/145 mm Speeds: 20 > 1600 rpm Power on the spindle: 5,5 kW Height: 3110 mm Weight: 1250 mm ACCESSORIES: 3150 mm Cooling system: 7 ton

boring mills and machining centers / Radial Drilling Machines
date: 25.03.2024 add to watchlist
approved
dealer
item-No.: 153735563
New in: 1991

new

check Seller: Vramac Machines bv
Location: 7327 Apeldoorn Land-nl

add to watchlist

Code 61078 Description Radial drilling machine Make BERGONZI Modell F 32 / 1000 Serial No. F 00 – 592 Year 1991 ( as NEW ) Capacity in Steel 60 35 mm Capacity in Cast Iron 26 45 mm Spindle taper MC 4 Spindle radius ( max.) 1100 mm Min/max height spindle / top of base plat 330 / 1030 mm Arm traverse 500 mm Spindle traverse 220 mm Number of speeds 12 steps Speed range 60 – 1300 rpm Feed range 0,06 – 0,12 – 0,22 mm/rev. Working surface base plate 1070 x 515 mm Base plate 1600 x 600 mm Motor 2,5 kW – 380 Volts Total power 3 kW Dimension 1600 x 600 x 1950 (2400) mm (L x W x H) Weight of machine 1300 kg Accessoiries coolant Box: 450 x 550 x 500 mm Condition Machine is in new condition

boring mills and machining centers / Radial Drilling Machines
date: 21.06.2024 add to watchlist
approved
dealer
item-No.: 164345424

used

checkTOP Seller: Surplex GmbH
Location: Abtsgmünd-Untergröningen Land-de
Price: used machinery auction RESALE 450 € add to watchlist

Description: Spindle speed: 60 - 1350 rpm Projection: approx. 1100 mm Table dimensions: approx. 590 x 480 mm With 3 grooves and an attached vice Jaw width: 150 mmweight approx.: 1,000 kg, Approx. Onsite Dimension. (l x w x h): 1,800 x 900 x 2,000 mm

boring mills and machining centers / Radial Drilling Machines
date: 22.06.2024 add to watchlist
approved
dealer
item-No.: 161658099
New in: 1997

used

check Seller: KIRCHGEORG Werkzeugmaschinen GmbH
Location: Dreieich Land-de

add to watchlist

bore capacity in steel (diameter): 40 mmarm length: 1.000 mmworkpiece height max.: 1.250 mmtable-size: 1.150 x 690 mmspindle taper MT: 4 spindle turning speed range: 40 - 1.400 U/minfeed range: 0,08 - 0,40 mm/mincrossrail adjustment horizontal: 800 mmcrossrail adjustment vertical: 700 mmspindle stroke: 220 mmpower requirement: 3,5 kWcoolant: voltage: 380 Vtotal power requirement: 4,0 kWweight of the machine ca.: 1,6 t- Serial-No.: A01/446/97- adjustable cube table 600 x 500 x 500 mm- coolant device- machine lightThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

boring mills and machining centers / Radial Drilling Machines
date: 22.06.2024 add to watchlist
approved
dealer
item-No.: 156797642

new

check Seller: A+B Werkzeug Maschinen Handels GmbH
Location: Ahaus Land-de

add to watchlist

bore capacity in steel (diameter): 60,0 mmarm length: 350 - 1.600 mmworkpiece height max.: 665 x 1.250 mmturning speeds: 38 - 2.000 U/minspindle taper MT: 5 MKbase plate: 960 x 1.760 mmthreading: 42 Mquill stroke: 325 mmtotal power requirement: 4,0 kWweight of the machine ca.: 3.800 kg.range L-W-H: 2.600 x 1.100 x 2.770 mmscope of delivery :- Cube table- Drill chuck arbor MK 5 / B 16- Reducing sleeves MK 5/4, MK 4/3, MK3 / 2- LED machine light- First filling with Shell Tellus 46- coolant device- Frequency converter- Digital speed display- lift motor- hydraulic motor- Height-adjustable protective cover- operating tool The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

boring mills and machining centers / Radial Drilling Machines
date: 22.06.2024 add to watchlist
approved
dealer
item-No.: 163112228
New in: 2021

used

check Seller: Heinz Sanders GmbH
Location: 49779 Niederlangen Land-de

add to watchlist

bore capacity in steel (diameter): 40 mmarm length: 370 - 950 mmworkpiece height max.: -- mmturning speeds: 50 - 316 / 316 - 2000 U/minspindle taper: MK 4 tread diameter: max. M30 boring head: -90° bis +90° schwenkbarquill stroke: 200 mmfeed: (6) 0,08 - 0,50 mm/Udistance spindle /table: 390 - 780 mmT-slots: 18 mmcolumn diameter: 220 mmtotal power requirement: 2,2 kWweight of the machine ca.: 2,8 tdimensions of the machine ca.: 2,45 x 1,2 x 2,72 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

boring mills and machining centers / Radial Drilling Machines
date: 22.06.2024 add to watchlist
approved
dealer
item-No.: 164200111
New in: 1987

used

check Seller: KIRCHGEORG Werkzeugmaschinen GmbH
Location: Dreieich

add to watchlist

bore capacity in steel (diameter): 50 mmarm length: 1600 mmworkpiece height max.: 1500 mmtable-size: 700 mmspindle taper MT: 5 spindle turning speed range: 30-1200 U/minfeed range: 0,06 - 1,0 mm/Ucrossrail adjustment horizontal: 230 - 1.570 mmcrossrail adjustment vertical: 500 - mmspindle stroke: 320 mmpower requirement: 5 kWvoltage: 400 Vtotal power requirement: kWweight of the machine ca.: 3800 kgdimensions of the machine ca.: 0,95 x 2,5 x 2,95 m- Serial-No.: 348400- automatic vertical feed- rapid clamping boring chuck Ø 3-16- machine lampThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

boring mills and machining centers / Radial Drilling Machines
date: 08.01.2024 add to watchlist
approved
dealer
item-No.: 12807294

used

check Seller: Kurt Steiger Werkzeugmaschinen GmbH
Location: Wiesbaden Land-de

add to watchlist

Drilling capacity in steel (diameter): 60 mm projection: 2000 mm kl. / gr. Distance between Mounting surface and drill Quill: 525/1690 mm Quill stroke: 310 mm spindle mount MT: 5 table size: 1900 x 1100 mm speed: 30-1250 rpm feeds: 0.08-1.35 mm spindle drive: 5.5 kW weight: 5700 kg space requirement: 2975 x 1100 x 2950 mm

boring mills and machining centers / Radial Drilling Machines
date: 31.05.2024 add to watchlist
approved
dealer
item-No.: 164194864

used

check Seller: DenTool LTD
Location: 0 Naestved Land-dk

add to watchlist

Key data: 600 mm, 1200 mm

Stock number: 3869 RADIAL DRILL Manufacturer: BREDA, Type: R1200L - 30-40 Specifications: Projection 1200 mm Spindle cone 4 MK Spindle diameter 60 mm Large drilling capacity 30-40 mm Ø Spindle speeds 40-200 rpm Drilling movement 180 mm Accessories: Box table Length: 1750 mm, Height: 2100 mm, Width: 640 mm, Weight: 1500 kg

boring mills and machining centers / Radial Drilling Machines
date: 02.01.2024 add to watchlist
approved
dealer
item-No.: 159876343

used

Location: Land-nl

add to watchlist

Projection: 1200 mm Drilling capacity steel: Ø 30 mm Casting drilling capacity: Ø 40 mm Spindle Mount: MK4 Spindle speeds: 1350 rpm. Clamping sleeve LxWxH: 460 x 550 x 500 mm Surface flat floor plate: 1100 x 500 mm Country of origin: Italy Machine LxWxH: 1750 x 640 x 2100 mm Machine weight: 1500 kg

boring mills and machining centers / Radial Drilling Machines
date: 02.01.2024 add to watchlist
approved
dealer
item-No.: 158481791

used

Location: Land-nl

add to watchlist

Arm length: 2200 mm Drilling capacity steel: Ø 50 mm Spindle Mounting: MK5 Spindle speeds: 30 - 2200 rpm. Spindle -> slab: 1620 mm (max) Clamping sleeve LxWxH: 480 x 820 x 550 mm Surface floor slab: 1700 x 800 mm Motor power: 6 kW Country of origin: Italy Machine LxWxH: 2760 x 1000 x 2960 mm Machine Weight: 6000 kg

boring mills and machining centers / Radial Drilling Machines
date: 21.06.2024 add to watchlist
approved
dealer
item-No.: 164345380

used

checkTOP Seller: Surplex GmbH
Location: Torreglia Land-it
Price: used machinery auction RESALE 900 € add to watchlist

Description: spindle rotation speed 45-1600 RPM drilling capacity from 15 to 80 mm Z-axis travel 700 mm Traverse travel 900 mm L-shaped table 600x500x500 mmweight approx.: 2,070 kg, Approx. Onsite Dimension. (l x w x h): 2,100 x 1,100 x 2,600 mm

boring mills and machining centers / Radial Drilling Machines
date: 25.03.2024 add to watchlist
approved
dealer
item-No.: 153737071
New in: 1990

used

check Seller: Vramac Machines bv
Location: 7327 Apeldoorn Land-nl

add to watchlist

Code 71130 Description Radialbohrmaschine Make BREDA Modell R 55 x 1600 Serial No. 224 Year 1990 Capacity in Steel 60 55 mm Capacity in Cast Iron 70 mm Thread cutting in Steel 60 M 50 Thread cutting in Cast Iron M 65 Spindle taper 5 MC Spindle radius: max / min 1785 / 495 mm Spindle traverse 1290 mm Min / Max height spindle / top of base plate 505 - 1670 mm Arm traverse 855 mm Quill stroke 310 mm Number of speeds 12 Spindle speed range 30 - 1200 rpm Number of spindle feeds 8 Spindle feed range 0,06 – 1,0 mm/rev Baseplate size 2505 x 1000 mm Clampsurface base plate 1700 x 1000 mm Main motor 4,4 kW - 380 Volts Dimension of machine 2570 x 1000 x 2740 (3275) mm ( L x W x H ) Weight 4070 kg Accessoiries Box 1000 x 700 x 500 mm Coolant Hydraulic cl ...

boring mills and machining centers / Radial Drilling Machines
date: 22.06.2024 add to watchlist
approved
dealer
item-No.: 161568866
New in: 1970

used

check Seller: Christoph Busch GmbH
Location: Prüm Land-de

add to watchlist

arm length: 1200 mmbore cube: . condition: gebraucht The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

boring mills and machining centers / Radial Drilling Machines
date: 20.06.2024 add to watchlist
approved
dealer
item-No.: 127030026

used

Location: Land-de

add to watchlist

used, good condition radial drilling machine / Kesselradiale of Collet and Engelhardt, type BUV 1000 Head is rotating and swiveling. The machine is fully moveable. Technical data Spindle retainer 4 MK Drilling capacity approx. 40 mm RADIUS approx. 900 mm Dimensions L x W H approx. 2100 x 1000 x 2500 mm Weight approx. 2500 kg

boring mills and machining centers / Radial Drilling Machines
date: 22.06.2024 add to watchlist
approved
dealer
item-No.: 160729164
New in: 1977

used

Location: Land-de

add to watchlist

bore capacity in steel (diameter): 100 mmarm length: 3000 mmworkpiece height max.: 2500 mmbore capacity in cast iron: 120 mmcore boring capacity in St 60 - reboring: 170 mmthreading: M120 x 2 diameter of quill: 100 mmspindle taper MT: 6 turning speeds: 18-1800 U/minFeed: 0,037-2 mm/Usurface area: 1550x3150 mmtotal power requirement: kWweight of the machine ca.: 14 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

boring mills and machining centers / Radial Drilling Machines
date: 21.02.2024 add to watchlist
approved
dealer
item-No.: 151875437

used

check Seller: Telkes Gép GmbH
Location: Land-hu
Price: 10.260 € add to watchlist

Radial drilling machine #5292 Power:16 kW Drilling Capacity: 100 mm Arm Length: 2100 mm Arm Travel: 1500 mm Weight: 13 t

boring mills and machining centers / Radial Drilling Machines
date: 25.03.2024 add to watchlist
approved
dealer
item-No.: 153737083
New in: 1975

used

check Seller: Vramac Machines bv
Location: 7327 Apeldoorn Land-nl

add to watchlist

Code 111263 Description Radial drilling machine Make CSEPEL Model RFH 100 / 3000 Serial No. 73089 Year of make 1975 Drilling Cap. in St. 60 / cast iron 100 / 120 mm Spindle taper 6 MK Spindle radius 3500 mm Min/max height spindle / top of base plate 440 – 2100 mm Arm traverse 1260 mm Spindle traverse 400 mm Number of speeds 21 steps Speed range 18 – 1800 rpm Feed range 18 0,0375 – 2,0 mm/rev. Working surface bed plate 3160 x 1550 mm Motor 15 kW – 380 Volts Total power 20 kVA Dimension 4390 x 1550 x 4130 mm (L x W x H) Weight of machine 14.000 kg Accessoiries Box 1000 x 1000 x 500 mm Automatic Clamping Cooling Condition Machine is in good condition

boring mills and machining centers / Radial Drilling Machines
date: 30.04.2024 add to watchlist
approved
dealer
item-No.: 153624554

used

check Seller: ERS MANAGEMENT LTD
Location: Land-lt

add to watchlist

Boring diameter capacity: 100 mm Drilling radius: 3000 mm Work-piece height range: 440-2100 mm Spindle taper: MT 6 Spindle turning speed range: 18-1800 rpm Quill stroke: 400 mm Surface area: 3160x1500 mm Boring feed range: 0,0375 - 2 mmm/min Distance spindle - column: -Min.: 400 mm -Max.: 2850 mm Total power requirement: 13 kW Machinery dimensions: 4390x1550x4130 mm Machinery weight: 13200 kg

boring mills and machining centers / Radial Drilling Machines
date: 21.06.2024 add to watchlist
approved
dealer
item-No.: 164345149
New in: 1996

used

checkTOP Seller: Surplex GmbH
Location: Obersulm-Sülzbach Land-de
Price: used machinery auction RESALE 600 € add to watchlist

Description: Serial number 133 159 , Includes 2 vices, jaw width 110 and 150 mmboring diameter: 35 mm, clamping range of table: 1000x630 mm, turning speed range: 15 bis 2800 rpm, weight approx.: 2,500 kg, Approx. Onsite Dimension. (l x w x h): 2,700 x 1,600 x 2,100 mm

boring mills and machining centers / Radial Drilling Machines
date: 25.03.2024 add to watchlist
approved
dealer
item-No.: 153738587
New in: 1995

used

check Seller: Vramac Machines bv
Location: 7327 Apeldoorn Land-nl

add to watchlist

Code 171314 Description Controlled rapide radialdrilling machine Make DONAU Model DANUMERIC 340 Serial No. 6110 – 3 Year 1995 Control Donau Drilling cap. in St. 60 in full 40 mm Drilling cap. in Castiron GG 22 in full 50 mm Thread cutting in St. 60 M 36 Thread cutting in Castiron GG 22 M 45 Spindle taper ISO 40 Spindle speeds stepless 15 - 2800 rpm Quill movement 200 mm Feeds stepless 5 - 2000 mm/min Min/max radius of spindle 540 / 1590 mm Working surface table 1800 x 600 mm Min/max height spindlenose / top of table 85 / 695 mm Motor 5,5 kW 400 V Dimension 1800 x 2500 x 2300 (2700) mm (L x W x H) Weight 2900 kg Accessoiries Position controlled in X – Y – Z and spindle Coolant Machine can also be used without control Condition Machine is in very good condition

boring mills and machining centers / Radial Drilling Machines
date: 25.03.2024 add to watchlist
approved
dealer
item-No.: 157441341
New in: 1989

used

check Seller: Vramac Machines bv
Location: 7327 Apeldoorn Land-nl

add to watchlist

Rapid radial / Rapid radial / Snel radial DANUBE DR 13

boring mills and machining centers / Radial Drilling Machines
date: 25.03.2024 add to watchlist
approved
dealer
item-No.: 153737082
New in: 1984

used

check Seller: Vramac Machines bv
Location: 7327 Apeldoorn Land-nl

add to watchlist

Code 111258 Description Rapid Radial Drilling machine Make DONAU Model DR – 24 Serial No. 2300 – 3 Year 1984 Drilling cap. in St. 60 in full 28 mm Drilling cap. in Cast Iron 35 mm Tapping cap. in St. 60 M 20 Tapping cap. In Cast Iron M 30 Spindle taper 3 MK Spindle radius max / min. 1000 / 400 mm Min/max height spindle / top of table 80 / 650 mm Arm traverse 450 mm Spindle traverse 175 mm Number of speeds 18 steps Speed range 45 – 2240 rpm Number of feeds 4 Feed range 0,075 – 0,15 – 0,3 – 0,45 mm/rev. Working surface table 1200 x 500 mm Motor 1,1 / 1,6 kW – 380 Volts Dimension W x D x H 1200 x 1600 x 1910 mm Weight 1400 kg Accessoiries screw cutting Condition Machine is in normal condition

boring mills and machining centers / Radial Drilling Machines
date: 02.01.2024 add to watchlist
approved
dealer
item-No.: 152813798
New in: 1988

used

check Seller: Maschinenservice
Location: Land-de
Price: 8.999 € add to watchlist

- Drilling capacity into full steel ST 60 28 mm - Drilling capacity GG 25 40 mm - Thread cutting ST 60 M 30 - Thread cutting GG 25 M 40 - Drilling spindle holder MK 3 - Spindle diameter 50 mm - Pinolene stroke 150 mm - 18 drilling spindle speeds 45 - 2240 rpm - 4 drill feeds 0.1 - 0.45 mm - min./ max. distance spindle - table 300 / 700 mm - Drilling radius min. / max. 305 / 1005 mm - Table height 820 mm - Table size 1200 x 600 mm - Drive 400 V / 6 kW - Space requirement approx.B 1300 x H 2800 x D 2300 mm - Weight approx. 1500 kg - with: - Thread cutting device - hydr. Columns + boom clamping - Coolant device

boring mills and machining centers / Radial Drilling Machines
date: 21.06.2024 add to watchlist
approved
dealer
item-No.: 164338186

used

checkTOP Seller: Surplex GmbH
Location: Pfronten Land-de
Price: used machinery auction RESALE 400 € add to watchlist

Description: serial number 840-4, including three-jaw chuck diameter approx. 200 mmthroat: 550 mm, clamping range of table: 1000 x 400 mm, weight approx.: 1,750 kg, Approx. Onsite Dimension. (l x w x h): 1,800 x 1,300 x 2,400 mm

boring mills and machining centers / Radial Drilling Machines
date: 25.03.2024 add to watchlist
approved
dealer
item-No.: 153737078
New in: 1984

used

check Seller: Vramac Machines bv
Location: 7327 Apeldoorn Land-nl

add to watchlist

Code 81221 Description Position Controlled Fast Radial Drilling machine Make DONAU Model DR 32 NC Serial No. 7107 Year 1984 Control Heidenhain TNC 145 Drilling cap. in St. 60 in full 32 mm Drilling cap. in Castiron GG 22 in full 45 mm Thread cutting in St. 60 M 26 Thread cutting in Castiron GG 22 M 36 Table 1120 x 800 mm X – Axis 800 mm Y – Axis 630 mm Z – Axis ( Quill ) 170 mm Max. distance Column-Spindel 750 mm Vertical movement Spindelhead 400 mm Spindle taper MC 4 Spindle speeds 45 – 2240 rpm Quill movement 170 mm Rapide feed 8000 mm/min Feeds 4000 mm/min Motor 2,2 / 4,0 kW 380 Volts Dimension 5,0 x 4,0 x 2,7 meters (L x W x H) Weight 3000 kg Accessoiries Position controlled in X – Y – Z ( Quill ) Coolant Machine can also be used without control Condition Machine ...

boring mills and machining centers / Radial Drilling Machines
date: 06.02.2024 add to watchlist
approved
dealer
item-No.: 163302237

used

check Seller: Schrenk Werkzeugmaschinen
Location: 91126 Schwabach Land-de

add to watchlist

Key data: 40 mm, 1200 mm

Specifications: Drilling capacity to the full: 40 mm Projection 1200 mm Motor power 3.5 kW Tool holder MK4

boring mills and machining centers / Radial Drilling Machines
date: 22.06.2024 add to watchlist
approved
dealer
item-No.: 164321947
New in: 1983

used

check Seller: FEYEN Maschinen GmbH
Location: Lager Krefeld

add to watchlist

bore capacity in steel (diameter): 60 mmarm length: 2000 mmworkpiece height max.: 1790 mmbore capacity in cast iron: 70 mmspindle turning speed range: 28 - 1250 U/minspindle taper MT: 9 spindle stroke: 330 mmfeed range - spindle: 0,1 - 1,12 mm/Uhoriz. adjustment of drilling head: 1540 mmbase plate: 1840 x 1000 mmspindle drive: 7,5 kWstroke drive: 3 kWvoltage: 500 V / 50 Hztotal power requirement: 11,2 kWweight of the machine ca.: 5,5 tdimensions of the machine ca.: 3,3 x 1,1 x 3,1 melectr./hydraulic column clamping,cube table 500 x 600 x 500 mm,coolant deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

boring mills and machining centers / Radial Drilling Machines
date: 22.06.2024 add to watchlist
approved
dealer
item-No.: 160777110

used

check Seller: Heinz Sanders GmbH
Location: D - 49779 Niederlangen Land-de

add to watchlist

bore capacity in steel (diameter): 65 mmarm length: 400 - 2000 mmworkpiece height max.: -- mmspindle distance: 1720 mmnumber of spindle speeds: 30 - 1400 U/minstroke: vertikal 910 mmtotal power requirement: 7,5 kWweight of the machine ca.: ca. 8 tdimensions of the machine ca.: 1,4 x 3 x 3,8 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

boring mills and machining centers / Radial Drilling Machines
date: 22.06.2024 add to watchlist
approved
dealer
item-No.: 157172650
New in: 1982

used

check Seller: Intermach BV
Location: holland Land-nl

add to watchlist

bore capacity in steel (diameter): 50 mmarm length: 1250 mmworkpiece height max.: mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mBrand: Kao MingType: Lux Drill-1250 DHYear of make: 1982Capacity: 50 mmThroat depth: 1.250 mmSpindle taper: MK5Without drill block (is available separately)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

boring mills and machining centers / Radial Drilling Machines
date: 12.03.2024 add to watchlist
item-No.: 163553560

new

Seller: KNUTH Werkzeugmaschinen GmbH
Location: Land-de
Price: 17.400 € add to watchlist

Key data: 40 mm, 300 mm

The R-VT model belongs to the latest generation of widely used radial drilling machines. The unique operating concept simplifies machining and supports the operator in selecting the operating parameters. These models enable precise drilling, countersinking and tapping and are the ideal solution for one-off and small-batch production. - Unique operating concept - Advanced control of machine functions - Quill feed with servo motor - Solid construction ensures high stability - like new (exhibition machine)

boring mills and machining centers / Radial Drilling Machines
date: 22.06.2024 add to watchlist
approved
dealer
item-No.: 162719012

used

Location: Land-de

add to watchlist

bore capacity in steel (diameter): 120 mmarm length: 2500 mmworkpiece height max.: ca. 1800 mmbore capacity in cast iron: 160 mmdrilling radial min./max.: 880 / 2825 mmthroat min.: 555 mmcolumn diameter: 650 mmbore spindle diameter /taper: 90 / MK 6 mmdiameter of quill: 160 mmbore spindle turning speed range: 10 - 660 U/minbore depth: 650 mmfeeds: 0,07 - 3,0 mm/Udistance spindle/base plate: min. 300 / max. 2100 mmvertical adjustment of the arm: 1150 mmbase plate surface area: 3000 x 1550 mmtotal height of machine: 4500 mmtotal power requirement: 15 kWweight of the machine ca.: 16 t- right-/left spindle run- thread cutting deviceAccessories: DRO HEIDENHAIN on X-and Z-axis (arm and boring depth)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

boring mills and machining centers / Radial Drilling Machines
date: 22.01.2024 add to watchlist
approved
dealer
item-No.: 153915684

used

check Seller: Kurt Steiger Werkzeugmaschinen GmbH
Location: 65197 Wiesbaden Land-de

add to watchlist

Drilling capacity in steel (diameter): 80 mm Thread cutting in steel: M 80 x 4 mm Projection: approx. 500/2500 mm kl./gr. Distance between contact surface and drill pinole: 650/2300 mm Pinole stroke: 500 mm Table clamping surface: 1250 x 2800 mm Speeds: 9 - 1800 rpm Feeds: approx. 2 - 1250 mm Spindle drive: 7.5 kW Weight: 12000 kg Space requirement: 4000 x 1280 x 4100 mm

boring mills and machining centers / Radial Drilling Machines
date: 22.06.2024 add to watchlist
approved
dealer
item-No.: 161816061
New in: 1965

used

Location: Land-de

add to watchlist

bore capacity in steel (diameter): 45 mmarm length: 325 / 1000 mmworkpiece height max.: ca. 1000 mmspindle taper MT: 4 spindle turning speed range: 40 - 1700 U/minfeeds: 0,125 - 1,25 mm/Udistance spindle/base plate: 385 / 1400 mmquill stroke: 325 mmcrossrail adjustment vertical: 700 mm: 360 °boring head horiz. adjustable: 675 mmbase plate surface area: 1300 x 800 mmtotal power requirement: 6,2 kWweight of the machine ca.: 3,8 t- autom. feed- right-/left spindle runAccessories: box table 1000 x 750 x 500 mm, hydr. vice, width of jaws 200 mm, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

boring mills and machining centers / Radial Drilling Machines
date: 19.03.2024 add to watchlist
approved
dealer
item-No.: 135145625
New in: 1975

used

check Seller: Beppo Bercht Werkzeugmaschinen
Location: Land-de

add to watchlist

Drilling capacity in steel St 60 40 mm Drilling capacity in cast 50 mm Threads in steel 32 mm Threads cast 42 mm Taper of spindle mount Mt 5 Projection 1.630 mm Quill stroke 310 mm Spindle speed range 40-1,800 RPM Feed areas 0.125 1.25 mm / Rev About 3,7 kW Machine weight 3.8 t Quick change system

boring mills and machining centers / Radial Drilling Machines
date: 22.06.2024 add to watchlist
approved
dealer
item-No.: 162159959
New in: 1983

used

Location: Land-de

add to watchlist

bore capacity in steel (diameter): 55 mmarm length: 440 / 1600 mmworkpiece height max.: 1500 mmdistance spindle/base plate: 455 / 1840 mmspindle taper: MK 5 spindle turning speed range: 14 - 1800 U/minquill stroke: 400 mmfeeds: 0,05 - 2,5 mm/Ucrossrail adjustment vertical: 1000 mmarm swivelling radial: 360 °boring head horiz. adjustable: 1160 mmbase plate surface area: 1800 x 1100 mmtotal power requirement: 6 kWweight of the machine ca.: 7 tdimensions of machine L x W x H: 2,72 x 1,13 x 3,66 mAccessories: box table 1000 x 750 x 500 mm, drill chuck 3 - 16 mm, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

boring mills and machining centers / Radial Drilling Machines
date: 15.04.2024 add to watchlist
approved
dealer
item-No.: 161509634
New in: 1999

used

checkTOP Seller: ZOMA Maschinenhandel
Location: 04838 Eilenburg Land-de

add to watchlist

Radial drilling machine, used Manufacturer: KOVOSVIT Type: VO 50 Year built:1999 Projection: 1600 mm Drilling capacity: 60 mm Quill stroke 310 mm Table / footprint 1470 x 986 mm Weight: approx. 5 t

boring mills and machining centers / Radial Drilling Machines
date: 22.06.2024 add to watchlist
approved
dealer
item-No.: 161266570

used

check Seller: APT
Location: Deinze Land-be

add to watchlist

Maag VR4A Mk4Admission in drilling-spindle (morse): Mk4 Max drilling capacity: 50/60 mm Longitudinal travel drilling-head (X-axis): 945 mm Height-travel arm (Y-axis): 710 mm Min dist. round column--drillingsp (X-axis): 310 mm Max dist.round column -- drillingspindle: 1265 mm Dia spindle: 40 mm Max drilling-depth: 310 mm Speeds: 40 > 2000 rpm Power on the spindle: 3 kW Height: 2240 mm Weight: 910 mm ACCESSORIES: 2860 mm Cooling system: 2,55 ton

boring mills and machining centers / Radial Drilling Machines
date: 22.06.2024 add to watchlist
approved
dealer
item-No.: 161944781
New in: 2000

used

Location: Land-de

add to watchlist

bore capacity in steel (diameter): 100 mmarm length: 2700 mmworkpiece height max.: 2200 mmturning speeds: 9-1800 U/minFeed: 0,035-2,8 mm/Udigital readout: spindle diameter: 110 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

boring mills and machining centers / Radial Drilling Machines
date: 22.06.2024 add to watchlist
approved
dealer
item-No.: 162703804
New in: 1991

used

Location: Land-de

add to watchlist

bore capacity in steel (diameter): 50 mmarm length: 1100 mmworkpiece height max.: ca. 1000 mmbore capacity in cast iron: 60 mmspindle taper: MK 5 spindle turning speed range: 28 - 2500 U/minfeeds: 0,05 - 2 mm/Uquill stroke: 300 mmdistance basic plate - spindle nose: 630 - 1380 mmcrossrail adjustment vertical: 750 mmtotal power requirement: 6 kWweight of the machine ca.: 4 tdimensions of machine L x W x H: 2,74 x 1,14 x 2,59 mm- with thread cutting attachment -Accessories: box table 550 x 550 x 550 mm, vice, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

boring mills and machining centers / Radial Drilling Machines
date: 16.05.2024 add to watchlist
approved
dealer
item-No.: 163114539
New in: 1987

used

Location: Land-cz

add to watchlist

Maximum drilling capacity in steel/casting 63/80 mm The maximum drilling diameter in steel 300 mm leadership Maximum distance spindle axis to the leadership mantle 2000 mm Vertical adjustment arm 950 mm spindle speed - The number of stages 16 - Range from 11 to 2000 /min Main engine power of 5.5 kW Total input 8,5 kVA Weight 7100 kg

boring mills and machining centers / Radial Drilling Machines
date: 16.05.2024 add to watchlist
approved
dealer
item-No.: 163114540
New in: 1990

used

Location: Land-cz

add to watchlist

Type VR 6A Producer Mas Year of manufacture Max. drilling diameter iron/casting 63/80 mm Max. vertical arm adjustment 950 mm Max. motion of milling head on arm 1613 mm Dimensions l x w x h 3240x1300x3900 mm Machine weight 5800 kg Main motor output 5.5

boring mills and machining centers / Radial Drilling Machines
date: 04.04.2024 add to watchlist
approved
dealer
item-No.: 136406250
New in: 1977

used

Location: Land-cz

add to watchlist

VR 4A/1250 Producer Mas Max. drilling diameter 50 mm Max. vertical arm adjustment 750 mm Taper in spindle 4 Morse Main motor output 4 kW Dimensions l x w x h 2250x1055x2970 mm Machine weight 2700 kg

boring mills and machining centers / Radial Drilling Machines
date: 28.10.2022 add to watchlist
approved
dealer
item-No.: 85349974

used

check Seller: Mimu Werkzeugmaschinen
Location: Land-it

add to watchlist

High quality - Low price! Radial drill MAS VR5A Arm 1600mm Max dia in steel 50mm Max dia in cast iron 60mm Max threading in steel M30 Max threading in cast iron M42 MT 4 Spindelmotor 4 kW - 28 - 2500 RPM Distance table-spindle nose 1600 mm Clamiping area 1800 x 1000 Weight 3,7 Ton

boring mills and machining centers / Radial Drilling Machines
date: 18.04.2024 add to watchlist
approved
dealer
item-No.: 159348691
New in: 1988

used

check Seller: Beppo Bercht Werkzeugmaschinen
Location: Land-de
Price: VB 2.900 € add to watchlist

drilling diameter in mild steel 32 mm diameter during thread cutting 20 mm Projection 1,000 mm Power requirement 3.5 kW Machine weight approx. 1.7 t Accessories: Cube table

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
Banner ad information