used Bench Type Drilling Machines for sale

bore capacity in steel (diameter): 10 mmthroat: 200 mmbore stroke: 100 mmspindle turning speed range: 400-5000 U/mintable-size: 400x365 mmweight of the machine ca.: 0.15 tWith tapping devicewww.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bench Drilling Machine Fabr. AEG Type DTBK 15Max. Drilling capacity: 15 mmSpindle mounting: MK 14 speeds: 350/550/875/1400 rpm.Quill stroke: 105 mmDischarge: 250 mmColumn diameter: 80 mmTable size: 250 x 250 mmDrive power: 450 WPower connection: 380 V / 50 HzOutside dimensions approx: 300 x 650 x 950 mmWith- Drill chuck and insert pin- swing-away intermediate tableused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Direct recording: B16 Drilling capacity: 10 mm Speed range: (4) 700 - 2040 min-1 Spindle stroke: 70 mm Table size: 175 x 175 mm Projection: 200 mm Column diameter: 70 mm Motor power: 350 W Connection: 400 V Dimensions (WxDxH), approx.: 300 x 580 x 800 mm Equipment: - Machined base with T-slots - Drilling depth stop - Drill chuck, brand: Röhm Supra 0 - 10 - New connection cables

: 12 mm: M 10 : B 16 : 250 - 5000 U/min.spindle stroke: 40 mmthroat: 200 mmcolumn diameter: 50 mm: 2 x 12 x 80 mm: 300x240 mm: 2 x 12 x 80 mm: 110 / 250 mmfeed: von Hand : Handrad Machine height: 670 mmtotal power requirement: 0,7 kWweight: 64 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 14 mm: M 10 : MK 2 : 230-4.000 U/min.spindle stroke: 80 mmthroat: 190 mmcolumn diameter: 65 mm: 300x240 mm: 2 x 12 x 80 mm: 75/357 mm: 300x240 mm: 2 x 12 x 80 mm: 437/437 mmfeed: von Hand : Handkurbel Machine height: 825 mmtotal power requirement: 0,7 kWweight: 83 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 14 mm: M 10 : MK 2 : 230-4.000 U/min.spindle stroke: 80 mmthroat: 190 mmcolumn diameter: 65 mm: 300x240 mm: 2 x 12 x 80 mm: 75/357 mm: 300x240 mm: 2 x 12 x 80 mm: 437/437 mmfeed: von Hand : Handkurbel Machine height: 825 mmtotal power requirement: 0,7 kWweight: 83 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 14 mm: M 10 : MK 2 : 230-4.000 U/min.spindle stroke: 80 mmthroat: 190 mmcolumn diameter: 65 mm: 300x240 mm: 2 x 12 x 80 mm: 75/357 mm: 300x240 mm: 2 x 12 x 80 mm: 437/437 mmfeed: von Hand : Handkurbel Machine height: 825 mmtotal power requirement: 0,7 kWweight: 93 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 16 mm: M 12 : MK 2 : 100-2.000 U/min.spindle stroke: 80 mmthroat: 190 mmcolumn diameter: 65 mm: 300x240 mm: 2 x 12 x 80 mm: 75/357 mm: 300x240 mm: 2 x 12 x 80 mm: 437/437 mmfeed: von Hand : Handkurbel Machine height: 825 mmtotal power requirement: 0,7 kWweight: 83 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 16 mm: M 12 : MK 2 : 100-2.000 U/min.spindle stroke: 80 mmthroat: 190 mmcolumn diameter: 65 mm: 300x240 mm: 2 x 12 x 80 mm: 75/357 mm: 300x240 mm: 2 x 12 x 80 mm: 437/437 mmfeed: von Hand : Handkurbel Machine height: 825 mmtotal power requirement: 0,7 kWweight: 83 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 23 mmthreading in St 60: M14 threading in GG 20: M16 : MK 2 spindle stroke: 100 mm: 125-2400 U/min.throat: 250 mmcolumn diameter: 90 mm: 370x300 mm: 2x14x160 mmdistance spindle /table: min./max. 125/455 mm: Handkurbel : 320x250 mm: 2x14x160 mm: 625/625 mmfeed: von Hand height of the machine: 1095 mmweight of the machine ca.: 160 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 15 mmthroat: 190 mmbore stroke: 90 mmtable-size: 245x325 mmnumber of spindle speeds: 155-6000 weight of the machine ca.: 0.1 tdimensions of the machine ca.: 0.4x0.8x0.8 mMore details on www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 32 mmthroat: 265 mmbore stroke: 160 mmturning speeds: 280 - 1975 U/min: 390 x 400 mmdistance drilling head - clamping area: 745 mmtotal power requirement: 1,1 / 400 kW / Voltweight of the machine ca.: 0,230 tdimensions: 0,9 x 0,5 x 1,4 mTable Drilling Machine with:variable feedTapping function.depth displayCoolant systemBelt-drivespindle protectionmachine lightThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 16 mmthroat: 150 mmbore stroke: 90 mmturning speeds: 340 - 2200 U/min: 243 x 243 mmtotal power requirement: 0,5 kW / Voltweight of the machine ca.: 42 Kgdimensions: 400 x 450 x 900 mmTable drill- Digital speed display- Spindle protection- vice- drill replacement- Quick span feed (1 to 16 mm)- Tilt and rotating rider work table.- deep stop- tool set- documentationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Flott Type: M1 ST Machine condition: very well used - two-stage motor (right, left) -Engine power 0.45kW/400V1370rpm; 0.75 kW/400 V/2620 rpm - Spindle holder Mk 1. -.max. Ø in steel 15mm /St60. - infinitely variable speed control 500-2200 rpm. - length table 230mm. -wide table 225mm. -drilling depth 70mm. -Distance between spindle axis and pole 185mm. -Post Ø 70mm. - dimensions W x L x H 300 mm x 650 mm x 800 mm - Weight approx. 80 kg.

Standard equipment: robust, high-quality and inclined rotary hood for easy reading of the speed LED lighting quickly adjustable and ergonomic drilling depth stop infinitely variable speed control Connection cable with SCHUCO plug (1.2 m) Undervoltage outlets Drilling protection with electr. Hedge thermal overload protection Emergency Stop Impact Button Weight in kg: 44 Motor kW: 0,45 AC 230 V Speed 1/min: 250-3000 Drilling capacity mm: - Steel Ø 12 mm - Aluminium Ø 20 mm - Softwood Ø 40 mm - Drilling depth 60 mm - Projection 220 mm - Saeulen diameter 70 mm - usable table area (W x L) 300 x 250 mm - T-groove size number 2, distance 100 mm Dimensions width 14/26 mm - Spindle B 16 - Speed display digital - Drilling depth display: scale - Drill depth stop: quickly adjustable stop ring - Feed: by hand - FACTORY WARRANTY: 3 years - free domicile incl. packa ...

- Thread cutting device - Control panel with OLED display - LED lighting - Quickly adjustable and ergonomic drilling depth stop - Infinitely variable speed control via central rotary knob - Thermal overload protection - Spindle stop - Drilling protection with electr. Hedge - Connection cable with Schuko plug SPECIFICATIONS - Spindle: B16 - Drilling depth: 60 mm - Projection: 220 mm - Column Ø: 70 mm - Spindle/work surface: 140 – 315 mm - Drill head height adjustment: by hand - Speed display: Digital - Drilling depth display: Digital - Feed (mm/revolution): by hand - Spindle speeds infinitely variable: 60 – 6,000 1/min - Continuous/normal drilling capacity: 10/12 mm - Thread cutting performance (depending on slope): M6 - FACTORY WARRANTY: 3 years (single shift) - OPTION Drilling package (No. 296570) Machine vice Flott [felix] 80 and quick-release drill c ...

Spindle speed infinitely variable electronic 40-4000 1/min Spindle: MK 2 Table height adjustment with rack Thread cutting performance max M12 Setting the thread cutting depth via digital depth display digital speed display digital drilling depth display Drilling depth stop via stop ring Feed / by hand Table height adjustment with rack Continuous/normal drilling capacity steel Ø 15 mm / 18 mm Drilling depth 70 mm Projection 220 mm Mouth diameter 70 mm Usable table area (W x L) 300x250 mm Machine dimensions (W x D x H) 420x520x850 mm Weight 65 kg max distance spindle/table/foot 300/ 370/ 420 mm Motor AC with frequency converter 230 V , 0.54 kW OPTION Drilling package B16 (No. 296570) - Vice felix 80 - Quick-release drill chuck 1-13 mm Price: € 539,- Factory warranty: 3 years Free domicile including packaging (Germany only) Delivery time: immediately from ...

Bench drill Fabr. FLOTT type TB 16Drilling capacity in steel: 16/20 mmDischarge: 250 mmSpindle mount: MK 2Quill stroke: 100 mm12 speeds: 220 - 4500 rpm.Table size: 290 x 220 mmColumn diameter: 100 mmDrive power: 0.75 kWExternal dimensions approx: 600 x 300 x 1200 mmWith:- Underframeused, in good working conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Fine Bench Drilling Machine make FRITZ HECKERT type BT 2Machine -No: 578 built in 1973Max. Drilling capacity: 6.0 mmStepless speed adjustment: 5000 - 14000 rpm.Discharge: 160 mmTable size: 180 x 180 mmMotor power: 200 WPower connection: 220 V / 50 HzWith- Drill chuck 0 - 6 mm- separate transformer- Spindle stroke with hand leverused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Inv. Num. : 6117 Type: SIP 640 Producer: GENEVE Created: 1986 Parameters: Work table length: 1100 mm Work table width: 842 mm Equipment: Technical Documentation additional rotating device

GT16Z 60-1400

Robust strong bench drilling machine Manufacturer: HILLE works type: BN 10 No. 2/23654 suitable for floating drilling, at the time a speed via pulley Engine power: 2,2 KW 380 volt 50 Hz 1440 RPM Engine type: Baucknecht R 2.2/4-71 Column diameter: 110 mm boring Quill: 60 mm Stroke: 100 mm Throat depth: 200 mm Max Entfern.Tisch Chuck: approx. 320 mm Dimensions: approx. 500 x 830 x 850 mm Equipment: Keyless chuck right off: 0-10 mm

bore capacity in steel (diameter): 25,0 / 30,0 mmthroat: 150 mmbore stroke: 120 mmthreading: M18 / M22 spindle taper: 3 MKtable:: 300 x 270 mmturning speeds: 200 - 4.000 U/mincolumn diameter: 100 mmtotal power requirement: 0,75 / 1,1 kWweight: 170 kgrange L-W-H: 800 x 500 x 1400 mm from a training workshop () New price approx. 4.700 eurosFurnishing:- robust bench drill with V-belt drive- Clamp / relax using a quick release lever- stepless speed adjustment- digital speed display- EMERGENCY OFF push button at the front- stable feed handle- stable quill for tool mounting- Thread cutting device- Right / left running of the work spindle- Pole changing motor- manual spindle feed- Height-adjustable work table, using a hand crank- adjustable drilling depth stopThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bench drill Manafacture: IXION Type BST - 25438/61 Projection approx. 180 mm Quill stroke approx. 65 mm Year of manufacture: unknown Power: 0.25 kW Chuck 0-10 mm total height approx. 80 cm Weight approx. 55 kg Item location: 58730 Fröndenberg/Ruhr The machine can be viewed and tried out under power. We will be happy to send you more photos by e-mail. A forklift/crane for loading is available. We reserve the right to make an intermediate sale. It is possible to expertly examine the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data, dimensions, year of construction, condition are non-binding and have been shown to the best of our knowledge and belief. Errors are therefore reserved. The warranty / guarantee is excluded. The goods are sold ex location / warehouse, with the transfer of risk to the b ...

Bench drill with pneumatic. Feed Fabr. IXION type BT 23Fabr -No: 140268Continuous drilling capacity: 23 mmNormal drilling capacity: 28 mmSpindle: MK 310 spindle speeds: 80 - 1400 rpmDischarge: 260 mmDistance spindle / table: 260 - 600 mmTable: 390 x 420 mmColumn diameter. : 110 mmTotal height approx. 1200 mmEngine: 1.0 / 0.6 kWWeight approx.: 215 kgWith- Pneumatic-hydraulic feed unit VE 22xa0xa0 Drilling capacity 20 mmxa0xa0 Drilling depth 100 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Technical data: -Drilling capacity approx. 30 mm - spindle mount MT 3 -Spindle speeds in 2 steps continuously variable 80-1400 RPM -Table surface 390 x 420 mm -Drill unit by hand crank height adjustment -min / max distance table / spindle 220 / 580 mm -Drilling spindle stroke 150 mm -Spindle projection powered 280 mm â 400 V / 1.3 / 2.3 kW -Space requirement approx. B 480 x H 880 - H 1200 X 1050 mm -Weight approx. 250 kg -Table base with storage space B 600 x h. 910 x H 800 mm -Weight 200 kg

bore capacity in steel (diameter): 13/15 mmthroat: 180 mmbore stroke: 70 mmspindle taper MT: 2 column diameter: 65 mmtable-size: 230 x 170 mmspindle turning speed range: 480 - 4000 U/mintotal power requirement: 0,55 kWweight of the machine ca.: 65 KGdimensions of the machine ca.: 250 x 700 x 855 mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 15,0 mmthreading: M2 - M10 throat: 215 mmbore stroke: 90,0 mmspindle taper: 2 MKtable:: 220 x 285 mmturning speeds: 320 - 1600 U/mincolumn diameter: 75,0 mmthread: 1000 Stk./Std.voltage: 380 Vtotal power requirement: 0,55 kWweight: 95,0 kgrange L-W-H: 800 x 500 x 1500 mmFurnishing :- high-performance tapping/drilling machine (combination machine)- Thread cutting with lead screw also possible without lead screw if required simple lead screw change- Single or continuous cycle selectable- Tapping or drilling function selectable- Working table with T-slots- Cross handle for manual spindle feed- Machine head height adjustable via hand crank- Machine base with cabinet door- free-moving footswitch- EMERGENCY OFF switch in frontThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 25 mmthroat: 240 mmbore stroke: 110 mmturning speeds: 125 - 2850 U/min: 310 x 320 mmdistance drilling head - clamping area: max. 650 mmtotal power requirement: 0,75 / 400 kW / Voltweight of the machine ca.: 0,175 tdimensions: 0,95x0,8x1,75 inkl. Tisch mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 14 /15 mmthroat: 180 mmbore stroke: 70 mmturning speeds: 420 - 2100 U/min: 250 x 220 mmdistance drilling head - clamping area: max. 380 mmtotal power requirement: 0,5/1,0 / 400 kW / Voltcolumn diameter: 65 mmtool taper: MK 2 weight of the machine ca.: 0,08 tdimensions: 0,4 x 0,5 x 0,9 mTable Drilling Machine with:variable feedTapping function.depth displayCoolant systemBelt-drivespindle protectionmachine lightThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Precise, smooth-rolling standard drill, high accuracy and quality. drilling table adjustable rack and the swiveling column. Full motor protection, star-shaped knob. Mains connection 230 V. Dauerbohrleistung in St 60: 15 mm Standard ALB ear power: 18 mm Infinitely variable spindle speeds: 200 - 4,000 min-1 Spindle: MK 2 Drilling depth: 80 mm Projection: 180 mm Distance from spindle/table top: up to 380 mm Tabletop: 250 x 220 mm Column diameter: 65 mm Total height: 910 mm Weight: 80 kg Three-phase motor frequency controlled: 1,1 kW Facilities: -Turn switch clockwise / counterclockwise to thread cutting - full motor protection -Star handle In stock, available now

bore capacity in steel (diameter): 15 / 18 mmthroat: 180 mmbore stroke: 80 mmturning speeds: 200 - 4000 U/min: 250 x 220 mmdistance drilling head - clamping area: max. 380 mmtotal power requirement: 1,1 / 400 kW / Voltcolumn diameter: 65 mmtool taper: MK 2 weight of the machine ca.: 0,08 tdimensions: 0,4 x 0,5 x 0,9 mPrecise table drill:- high accuracy and quality- Drill table adjustable via rack and swiveling around the column- Full engine protection- Star grip- 230 volt mains connectionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dauerbohrleistung in St 60: 15 mm standard ALB ear performance: 18 mm thread cutting performance: M 8 spindle: MK 2 drilling depth: 80 mm projection: 180 mm spindle speeds of stepless 200 - 4,000 rpm spindle speeds threads 200-700 rpm distance spindle/table: up to 380 mm tabletop: 250 x 220 mm column diameter: 65 mm total height: 910 mm weight: 80 kg three-phase motor frequency controlled: 1,1 kW with full thread cutting device and programmable digital display

bore capacity in steel (diameter): 15 / 18 mmthroat: 180 mmbore stroke: 80 mmturning speeds: 200 - 4000 U/min: 250 x 220 mmdistance drilling head - clamping area: max. 380 mmtotal power requirement: 1,1 / 400 kW / Voltcolumn diameter: 65 mmtool taper: MK 2 weight of the machine ca.: 0,08 tdimensions: 0,4 x 0,5 x 0,9 mprecise bench drill:- Large speed range- Programmable thread cutting- high accuracy and quality- Drill table adjustable via rack and swiveling around the column- Full engine protection- Star grip- 230 volt mains connectionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC-controlled table top drilling machine make METABO type T 6 electronicsfor drilling long materialDrilling capacity in steel: 6 mmPower consumption: 400 WPower output: 200 WIdling speed: 0 - 7200/20000 rpm.Drill spindle with external taper: B 10Light projection: 150 mmDrilling stroke: 40 mmColumn diameter: 35 mmHeight of the machine: 400 mmWeight of the machine: 22 kgelectrical connection 220 V / 400 V: 2.0 ASpeeds: 0 - 2500 rpmLongitudinal travel approx. 1600 mmOverall dimensions of the unit: 2300 x 650 x 1600 mmWith- CNC FRANKE CNC 2100 range control- Built on a workbench with 2 drawer cabinets- automatic longitudinal travel 1600 mmxa0xa0 Traverse right and left of the workpiece holder protected with bellowsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors exc ...

bore capacity in steel (diameter): 13 mmthroat: 235 mmbore stroke: 60 mmspindle taper: B 16 spindle turning speed - stepless: 100-3000 U/mintable surface area: 290x270 mmcolumn diameter: Ø 60 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Prec. Fine boring machine make OVERBECK type Zetto 03Machine -No: 1131 Year 1972Drilling capacity: 0.2 - 1.5 mmgr. span of drill chuck: 1.5 mmSpindle diameter: 12 mmCone of the drill spindle: 20Stroke: 25 mmProjection: 180 mmDistance spindle - table top: 65 - 130 mmDistance spindle - base plate: 150 mmstepless speeds: 0 - 12000 rpm.Drive power: 0.17 kWOutside dimensions approx: 250x500x650 mmWeight approx: 40 kgWith- Three-jaw chuck 0 - 1.5 mm Albrecht- Three-jaw chuck 0 - 3.0 mm- without transformer- magnifying glass with lightingvery little used, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Prec. Fine boring machine make OVERBECK type Zetto 03Drilling capacity: 0.2 - 1.5 mmgr. span of drill chuck: 1.5 mmSpindle diameter: 12 mmCone of the drill spindle: 20Stroke: 25 mmProjection: 180 mmDistance spindle - table top: 65 - 130 mmDistance spindle - base plate: 150 mmstepless speeds: 0 - 12000 rpm.Drive power: 0.17 kWOutside dimensions approx: 250x500x650 mmWeight approx: 40 kgWith- Underframe- without transformerused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Prec. Fine boring machine make OVERBECK type Zetto 03Machine -No: 1130 Year 1972Drilling capacity: 0.2 - 1.5 mmgr. span of drill chuck: 1.5 mmSpindle diameter: 12 mmCone of the drill spindle: 20Stroke: 25 mmProjection: 180 mmDistance spindle - table top: 65 - 130 mmDistance spindle - base plate: 150 mmstepless speeds: 0 - 12000 rpm.Drive power: 0.17 kWOutside dimensions approx: 250x500x650 mmWeight approx: 40 kgWith- TransformerusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Bench drill make PERFEKT type X 15Machine -No: 872075 built in 1987set up for automatic workflow!Technical specifications:Drilling capacity max.: 15 mmSpindle mount: MK 210 spindle speeds: 225 - 3000 rpm.Quill stroke: 90 mmProjection: 200 mmTable size: 240 x 240 mmDrive power: 0.5 hpDimensions L x W x H approx.: 700 x 750 x 920 mmadditionally equipped with- pneumatic moveable clamping table 280 x 165 mm for automatic longitudinal travel- pneumatic quill feed- Blow-out device- maintenance unitused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Reich Table Drill - Speed: 780 - 10,000 1/min - Height: 600 mm - Width: 350 mm - Depth: 500 mm Good condition fully functional can be visited and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article, in order to avoid misunderstandings, can be viewed before the purchase and tested under electricity. Please ask questions before buying to avoid ambiguity. For general questions or an appointment for a viewing, I can be reached at any time at the telephone number below or above. Errors in the description and prior sale excepted. VAT will be shown separately on my invoices. Shipping with freight forwarder.

Spindle diameter:100 mmTransverse travel - axis X:1200X1000X800 mmMax. Table load:3000 kg

Bench drill make ROMANIA type G 13Fabr. -No: E647, built in 1973Technical specifications:Drilling capacity: 13 mm8 spindle speeds: 425 - 4500 RPM.Throat: 200 mmTable size processing area: 250 x 300 mmTable size with channel: 340 x 370 mmColumn diameter: 80 mmelectr. Connection: 1.35 kWExternal dimensions of the drill L x W x H: 800 x 370 x 950 mmColor greenWith- underframe- V-belt driveused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Manufacturer: Solberga Type: SE1235 Dimensions: 800 x 500 x 2240 mm Weight: 500 kg Electrical data: - 380 volts; 1.8-2.2 kW Speed: 40 - 1320 rpm Switchable with direction of rotation up to 40 mm thick Machine loading MK4 Morse cone size Table size: 455 x 455 mm (height adjustable)

Solid Table Drill - with infinitely variable speed - 2 stage motor - Height: 90 cm - Width: 35 cm - Depth: 50 cm Good condition fully functional can be visited and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article, in order to avoid misunderstandings, can be viewed before the purchase and tested under electricity. Please ask questions before buying to avoid ambiguity. For general questions or an appointment for a viewing, I can be reached at any time at the telephone number below or above. Errors in the description and prior sale excepted. VAT will be shown separately on my invoices.

Spindle diameter: 130 mm Description: The machine is in good technical condition, by prior arrangement the possibility of a test drive. Table size: 1800 x 1800 Table load: Workpiece weight 12,000 kg Travel length X-axis: 2200 mm Travel length Y-axis: 2697 mm Travel length Z-axis: 1315 mm Control: Heidenhain iTNC 530 Speed range: 12.5 ... 800 milling Spindle power: Motor power 38kW Spindle torque: Spindle diameter: 130 mm Maximum spindle speed: min 3200 Magazine: no Number of tools in the magazine: Feed speed: Total weight of the machine: 32,000 kg Total height of the machine: 5005 mm Partial repairs: 5.3. 2019 - Repair spindle drive 14.1.2019 - Repair Z-axis 6.5.2015 - Repair gearbox and spindle

Drilling capacity: 16 mm Spindle speeds: (12) 290 - 2330 min-1 Tool holder: MK 2 Drilling depth: 85 mm Projection: 160 mm Spindle/table distance, max.: 470 mm Spindle/base plate distance: 650 mm Table size: 290 x 290 mm Column diameter: 80 mm Total height: 1010 mm Weight, approx.: 55 kg DC motor: 0.4 kW Equipment: - Star handle - Emergency stop impact button - Micro limit switch protected spindle protection -CE

Drilling capacity: 20 mm Tool holder: MK 3 Speed, infinitely variable: 190 - 1900 min-1 Spindle stroke: 85 mm Column diameter: 80 mm Total height: 1060 mm Connection: 230 V Motor power: 2.3 kW Weight, approx.: 95 kg Equipment: - Infinitely variable speed adjustment - Digital speed display - Emergency stop impact button - Quick-change drill chuck

UWM BENCH DRILL TYPE 20 Professioneel -MK2 -180/2740 t/m -Table 320 x 300 mm -Table is draaibaar -Noodstop -Beschermkap -Verlichting -Documentatie -230V DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

- Table work surface: 360 x 280 mm - Spindle spacing: 360 mm - maximum distance between spindle and table: 360 mm - min. distance between spindle and table: 65 mm (machine lowered) - min. distance between spindle and table: 153 mm (machine lifted) - Pinole stroke: 102 mm - Extension: 207 mm - External dimensions (H x D x W): 1116 x 580 x 455 mm - 4 spindle rotary swivels (2 x mechanical, 2 x pole switching) - Pole switchable motor - Connection voltage: 380 V / 50 Hz - Control voltage: 220 V - Connection value: 0.80 / 1.0 kW - Rated current: 1.97 / 2.6 A - Total weight: 134 kg - with table lighting - Transport dimensions (H x W x D): 1112 x 600 x 800 mm, on pallet! - Transport weight: 160 kg Note: The machine has been completely redesigned in our company and checked for its function. Among other things, a new drill chuck of the brand "RÖHM" (3 - 16 mm / Art. No. ...