Manufacturer:
(Category: 101)
The machine is in good technical condition, an inspection and a test run are possible by prior arrangement. Workpiece probe Renishaw RMP60. Centerline probing, simultaneous machining, chip conveyor. 20 tools. Extensive optional equipment. Table diameter 200 mm. X and Y axes overhauled.
bore capacity in steel (diameter): mmthroat: 290 mmbore stroke: 180 mmtotal power requirement: 1,9 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Inv. Num. : 8553 Type: VOC 1000 Producer: INTOS Created: 2003 Parameters: Control system: Siemens 810D Work table length: 1100 mm Work table width: 500 mm Maximum spindle speed: 8000 1/min Number of axes: 3 X-axis travel: 1000 mm Y-axis travel: 500 mm Travel Z axis: 500 mm Machine weight: 4500 kg
Inv. Num. : 8551 Type: M 1200 Producer: Microcut Created: 2018 Parameters: Control system: Siemens Sinumeric 828D SW4 Work table length: 1400 mm Work table width: 710 mm Maximum table load (even): 1000 kg X-axis travel: 1200 mm Y-axis travel: 730 mm Travel travel Z-axis: 650 mm Number of axles: 30 pieces Machine weight: 10500 kg
Inv. Num. : 8550 Type: VF-3 Producer: HAAS Created: 2017 Parameters: Control system: HAAS Work table length: 1219 mm Work table width: 457 mm Maximum table load (uniform): 1588 kg Spindle drive power: 22.4 kW Speed: 8100 1/min X-axis travel: 1016 mm Y-axis travel: 508 mm Z-axis travel: 635 mm Cone: BT 40 Machine weight: 5316 kg
Travel X/Y/Z: 1000mm/600mm/600mm, feed rate: 30m/min, rapid traverse: 30m/min, table dimensions X/Y: approx. 1200mm/600mm, max. table load: 800kg, tool stations: 24, tool holder: SK40, speed: 8000rpm. Machine dimensions X/Y/Z: approx. 3000mm/3500mm/3000mm, weight: approx. 5000kg, operating hours: approx. 10346h, spindle hours: approx. 10346h. Includes a compact filtration system Interlit SUK 200/550, year of manufacture: 2000. The machine is equipped with a new control system. Documentation available. An on-site inspection is possible.
Inv. Num. : 8548 Type: XV 1000 Producer: Hardinge Bridgeport Created: 2007 Parameters: Control system: Siemens 810DE Work table length: 1100 mm Work table width: 500 mm Tool magazine: 20 pieces Maximum spindle speed: 8000 1/min Number of axes: 3 X-axis travel: 1020 mm Y-axis travel: 610 mm Travel Z-axis: 560 mm Machine weight: 6000 kg
5-Axis Vertical Machining Center DMG DMC 75V LINEAR Linear Motors The machine can be viewed in working order in our warehouse in Gussago, Brescia. Mimu Machine Tools Gussago BS Italy Dmg DMC 75 Linear Heidenhain CNC iTNC 530 Tool holder HSK 63 Spindle power 35 kW Spindle speed 18,000 rpm Number of tools 60 X-axis travel 885 mm Y-axis travel 600 mm Z-axis travel 600 mm Rapid feeds X-Y-Z linear axes 90 m/min Roller guides Fourth-axis head yes Fourth-axis head type continuous Fourth-axis head degrees -10° + 110° Rotary table yes Rotary table type continuous Table size 750 mm MACHINE EQUIPMENT Precision package with optical scales on the axes New spindle line The machining center is a machine tool equipped with a numerical control capable of performing multiple mechanical operations with a single setup on Multiple surfaces of the same workpiece. It is generally equipped with multiple m ...
bore capacity in steel (diameter): 60 mmCenter of spindle to wall or column: min./max. 320 - 160 mmspindle turning speed range: 20 - 2.500 U/minquill stroke: 310 mmtotal power requirement: 4 kWweight of the machine ca.: 4.500 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
3-axis machining centre with automatic 8-fold tool changer for aluminium, PVC or steel profiles Max. machining length: 7200 mm Max. travel Y-axis: 480 mm Max. travel Z-axis: 325 mm Control system E 500 Speed infinitely variable up to 6,000 rpm Minimum quantity spraying 2 angle heads High-speed spindle Tensioner detection and displacement 8 pneumatic material tensioners Pendulum operation possible through 2 light barrier areas Loading included in the price Weight: approx. 5,000 kg
3-axis machining centre with automatic 8-fold tool changer for aluminium or PVC profiles Max. travel X-axis: 4200 mm Max. travel Y-axis: 480 mm Max. travel Z-axis: 325 mm Control system E 500 Speed infinitely variable up to 6,000 rpm Hand-held control unit Minimum quantity spraying Double-sided angle head and a high-speed spindle Tensioner detection 8 pneumatic material tensioners Light barrier
Radial drill Manufacturer: Valmer Type: TR 80/2500 SP Year of Make: 2006 Table dimensions: 1,000 x 800 x 560 mm Drilling diameter max.: 80 mm Max. tap diameter: 42 mm Max. spindle axle/column distance: 2,500 mm Max. distance between spindle axle and column: 500 mm Head movement horizontally: 2,000 mm Max. distance between spindle nose and working surface: 2,000 mm Distance between spindle nose and working surface min.: 550 mm Spindle stroke: 450 mm Morse taper: MT 6 Power: 7.5 kW Machine dimensions: 3,730 x 1,400 x 3,825 mm Weight: 11,000 kg
x-travel: 1800 mmy-travel: 700 mmz-travel: 700 mmcontrol: Heidenhain iTNC 530 table surface area: 2100 x 700 mmtable load: 1500 kgturning speeds: 20 - 18000 U/mintaper ISO: SK 40 spindle motor: 35 / 25 kWrapid traverse: 40 m/mintool change unit: 60 -fachdimensions of the machine ca.: 5,5 x 3,5 x 2,7 mtotal power requirement: kWweight of the machine ca.: 14 t- Control Heidenhain iTNC 530- 5-axis- Fixed table with integrated rotary table dia. 750mm (500kg)- IKZ 40 bar- Tool changer 60-fold (SK 40)- Milling head with B-axis- Chip conveyor- Spray gun- 3d Quick Set- BLUM laser measuring system- Direct distance measuring system- 2 Rotary Clean Windows-The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 600 mmy-travel: 580 mmz-travel: 580 mmcontrol: SEICOS 16M B-axis (table): 360 x 1° mmfeed X/Y/Z/-axis: 1 - 50.000 mm/minrapid traverse X/Y/Z: 50,00 m/minturning speed range - stepless: 35 - 12.000 Nmspindle drive: 22,00 kWmax. torque on the spindle: 236 tool taper: BT40 toolpiece magazine: chain magazine: 61 Stücksize of pallet: 2x 400x400 mmmax. workpiece diameter: 630 mmworkpiece height max.: 680 mmworkpiece weight max.: 400 kgtotal power requirement: 30,00 kWweight of the machine ca.: 12,00 tdimensions of the machine ca.: 4,00 x 3,50 x H3,00 mWith SEICOS S16M control unit, coolant system, chip conveyor, electron. handwheel, dust exhauster.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 1.035 mmy-travel: 560 mmz-travel: 510 mmCNC-control: Heidenhain TNC620 table-size: 1200 x 560 mmmax. table load: 1000 kgspindle taper: SK 40 spindle turning speed range: 10.000 U/mindrive capacity - spindle motor: 13 kWfeed stepless: 20.000 mm/minrapid traverse: 25 m/mintool change unit: 20 Pos.coolant: IKZ 20 bar voltage: 400 Vtotal power requirement: 17 kVAweight of the machine ca.: 4,1 tdimensions of the machine ca.: 2,55 x 2,30 x 2,25 m- Serial No.: 1539000377A- Machine ON: 21.689 h- Program Run: 9.021 h- CNC-Control: Heidenhain TNC620- elektronic hand wheel- chip conveyor- coolant through spindle 20 barThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Deckel Maho DMC63V BJ 2009 ( incl. new milling spindle + Y-spindle ) Heidenhain Control
DMC 650V with Long Pallet Changer for sale.
Mitsubishi MAF 210/150A Year: 1977 Table Size: 3000 × 3000 mm | Load Capacity: 60,000 kg Axis Travel: X: 14,000 mm | Y: 4500 mm | Z: 900 mm Spindle: Ø164 mm | 4–3460 rpm | 37/45 kW DC motor Control: ISO/EIA compatible | 5-axis interpolation | M-NUX115 DRO Accuracy: ±0.015 mm/m (X/Y), Repeatability ±0.01 mm Included Accessories: • Tool locking (5 pull studs) • Digital readout system • NC controller with startup components • Setup/leveling blocks • Maintenance toolkit • Protective covers Optional Add-ons (upon request): • Chip conveyor and coolant system • Rotary/angled fixturing • Pendant control • Bellows or floor plate systems • Special tooling packages Utilities & Installation: • Power: AC 220V (standard) • Air: 2–7 kg/cm² at 100 L/min • Installation space & foundation info on request
Type: Lid Maho DMU35M Year of Make: 2003 Description: Spindle 20-6300rpm 10kW SK40 Feed speed X,Y,Z 5000mm/min Position tolerance (direct measuring system) 0.010mm Travel: X=350mm, Y=240mm, Z=340mm Other: Tool clamping pneumatic Rotary table with swivel axis manual Weight 1600kg Operating hours approx. 4000h Control Siemens NC810D Unfortunately, the tool spindle has a bearing damage and is therefore only able to run to a limited extent.
BAZ Wagner Eumach EBM 3200 BJ2009
4-axis CNC horizontal milling machine Hüller Hille BlueStar5 built in 2007 automatic pallet changer with 2 interchangeable pallets with 4 vices each (125), 4 additional interchangeable pallets (one with mineral casting clamping tower), Renishaw measuring system, high-pressure coolant system with additional filter device, coolant and air through the spindle, 40-fold tool magazine BT40, Operating hours and control see photo
Machine is still energized and fully operational. BAZ Matsuura MAM72 BJ 2006 spindle, and spindle motor were last replaced in 2018. Machine would be free immediately. Scope of delivery: -Machine - 2x additional pallet - Knoll high-pressure system - Machine running time 19,911 hours (see picture)
BAZ Heckert H55 (4 axle) BJ 2019
Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve, spindle sleeve-Adapter sleeve: Morse taper sleeve adapter sleeve 2 pieces-Type: MK3/2-Shipping/Price: complete-Dimensions: Ø 24 x 112 mm-Weight: 0.2 kg/piece
Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve, spindle sleeve-Morse taper sleeve/adapter sleeve MK4/2-Dimensions: Ø 31 x 125 mm-Weight: 0.4 kg
bore capacity in steel (diameter): 32 mmthroat: 300 mmbore stroke: 150 mm: MK 4 : 480 x 480 mm: 0,1 - 0,2 mm/U: M 22 (St 60) : 35 mm: 80-1170 U/min: 2,3 kW: 350 kg: 800 x 1000 x 2000 mmAccesories:-Machine light (built-in)-Coolant device in the foot (built-in)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Specifications: Manufacturer: 3M ESPE Type: Lava CNC 500 Control: Beckhoff Year of Make: 2008 Compressed air: 6.5 bar Rated power: 1 kW Rated mains frequency: 50/60 Hz Weight Weight: 620 kg Condition Condition: Used Functional: Tested and fully functional
Specifications: Manufacturer: 3M ESPE Type: Lava CNC 500 Control: Beckhoff Year of Make: 2008 Compressed air: 6.5 bar Rated power: 1 kW Rated mains frequency: 50/60 Hz Weight Weight: 620 kg Condition Condition: Used Functional: Tested and fully functional
x-travel: 2000 mmy-travel: 1200 mmz-travel: 1400 mmrotary table: 1800x1200 mm/mincontrol: Heidenhain 426 Number:: Maschinennummer 3112 total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mMilling head with continuous positioning along the B-axis, spindle speed 3,000 rpmAutomatic tool changer with 20 magazine positions, SK 50 tool holder2x chip conveyors in longitudinal direction, ejection on the leftCoolant systemFully enclosedThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of saleapply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. Yo ...
max. workpiece diameter: . mmmin. workpiece diameter: . mmworkpiece length: . mmclamping diameter max.: 550 mmVertikal stroke: 800 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Hans-Jürgen Geiger Maschinen-Vertrieb GmbH
