Manufacturer:
(Category: 101)
Travel X/Y/Z: 630mm/530mm/465mm, tool holder: SK40, speed: 12000rpm, tool positions: 32, table dimensions X/Y/Z: 920mm/540mm, machine dimensions X/Y/Z: 2600mm/2350mm/2750mm, weight: approx. 6500kg. The sensor must be replaced and calibrated. Documentation available. On-site inspection is possible.
Manufacturer DMG Model DMU 125 P hy-dyn Year 2001 CNC HEIDENHAIN TNC 430D Table Table dimensions 1,250 x 1,000 mm. Maximum weight allowed on table 2,000 kg. Routes and advances Longitudinal, transverse and vertical courses (X/Y/Z axes) 1,250/880/800 mm. Table rotation (C-axis) 0.001º (Continuous) Fast Axis Feed 30,000 mm/min Head Automatic Type Horizontal/Vertical Head Positioning (A-Axis) 0.001º (Continuous) SK-40 Spindle Cone DIN 69871 Speed range 20-18,000 rpm Main engine power 37 kW Equipment Automatic tool loader INCLUDED No. of Charger Tools 30 Internal cooling 40 bar INCLUDED HEIDENHAIN Optical Rulers INCLUDED Chip Conveyor INCLUDED HEIDENHAIN HR-410 Portable Steering Wheel INCLUDED Other Net weight 13,000 kg.
bore capacity in steel (diameter): 45 mmthroat: 350 mmbore stroke: 180 mm: 4 speeds: 30 - 765 U/mintable-size: 720 x 560 mmtotal power requirement: 3,4 kWweight: 950 kgdimensions: 1200 x 800 x 2300 mmColumn drilling machine OPTIdrill DP 33V promotion set / 3020680SETWith an electronically controllable drive in a modern design Industrial engine Quiet running spindle thanks to new spindle design Machine operation with safety electronics in 24 V direct current Guaranteed concentricity = 0.02 mm in the measured drilling spindle Clockwise/counterclockwise rotation Precision spindle bore Control panel with user-friendly, dirt and water resistant Membrane keyboard RPM display Separate emergency stop button Tapping function Precisely crafted, stable drill table with diagonal T-slotswith all-round cooling water channel, can be tilted sideways by ±45° and rotated by 360° Drilling depth stop LED ...
bore capacity in steel (diameter): 28 mmthroat: 250 mmbore stroke: 130 mmmorse taper: 3 MKtable:: 380 x 380 mmturning speeds: 75 - 3200 U/minthread: M16 ST60column diameter: 98 mmengine output: 1,1 kWdimensions: 800 x 500 x 2000 mmweight: 210 kg- automatic drill feeds (magnetic clutch)- Height adjustable and angle adjustable table- Movable work table- Integrated cooling system- Powerful engine- 3 hand levers for drilling feed- Safety shield with limit switch- Separate emergency stop- Built-in working lights- Incl. drill chuck 16mm - B16- Built-in automatic thread cutting.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 36 mmthroat: 300 mmbore stroke: 160 mm: 4 speeds: 100 - 1600 U/mincolumn diameter: 145 mmtable-size: 500 x 370 mmtotal power requirement: 2,2 kWweight: 440 kgdimensions: 1200 x 800 x 2300 mmColumn drilling machine OPTIdrill DP 33V promotion set / 3020680SETWith an electronically controllable drive in a modern design Industrial engine Quiet running spindle thanks to new spindle design Machine operation with safety electronics in 24 V direct current Guaranteed concentricity = 0.02 mm in the measured drilling spindle Clockwise/counterclockwise rotation Precision spindle bore Control panel with user-friendly, dirt and water resistant Membrane keyboard RPM display Separate emergency stop button Tapping function Precisely crafted, stable drill table with diagonal T-slotswith all-round cooling water channel, can be tilted sideways by ±45° and rotated by 360 ...
bore capacity in steel (diameter): 55 mmarm length: 2500 mmworkpiece height max.: - mmtotal power requirement: 8 kWweight of the machine ca.: 5 tdimensions of the machine ca.: 4 x 1 x 3 mRadial drilling machine MK 5Spindle holder MK 5Speed range 30 - 1500 min-1Feed rates 0.05 - 0.6 mm/revSpace requirement approx. 3.7 x 1 x 3 mWeight approx. 5 tonnes (estimated)Working range: MK 5 x 2500Drive: 3.7 / 6The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
axis stroke (X,Y,Z): 742 x 435 x 510 mmNumber of spindle head vertical: / St.Number of spindles head horizontal: / St.The DOOSAN DNM 400 is a vertical CNC machining center designed for precisemilling operations in metalworking. It is particularlysuitable for small to medium-sized workpieces and offers a solidcombination of performance, accuracy and reliability.All technical documents for the machine are available and included.Accessories included.Travel rangesX-axis: 742 mmY-axis: 435 mmZ-axis: 510 mmRapid traverseX-axis: 36 m/minY-axis: 36 m/minZ-axis: 30 m/minMax. cutting feedrate: 1~15,000 mm/minBall screw (Diameter × Lead)X-axis: 40 × P12 mmY-axis: 40 × P12 mmZ-axis: 40 × P10 mmAccuracyPositioning accuracy: ±0.005 mm over the full strokeRepeatability: ±0.002 mmTable size: 920 × 435 mmMin./Max. spindle-to-table distance: 150~660 mmMax. table load: 600 kgfTable surface configura ...
bore capacity in steel (diameter): 28 mmthroat: 250 mmbore stroke: 130 mmmorse taper: 3 MKtable:: 380 x 380 mmturning speeds: 75 - 3000 U/minengine output: 1,1 kWcolumn diameter: 98 mmthread: M16 ST60dimensions: 700 x 450 x 1500 mmweight: 200 kg- Height adjustable and angle adjustable table- Movable work table- Prepared for cooling system- Powerful engine- 3 hand levers for drilling feed- Safety shield with limit switch- Separate emergency stop- Built-in working lights- Incl. drill chuck 16mm - B16- Built-in automatic thread cutting.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 30 mmthroat: 254 mmbore stroke: 120 mm: 4 Motor output: 9 speeds: 120 - 1810 U/mincolumn diameter: 92 mmtable surface area: 475 x 425 mmtotal power requirement: 1,1 kWdimensions: 915 x 450 x 1705 mmweight: ca. 135 kgColumn drilling machine OPTIdrill DP 33V promotion set / 3020680SETWith an electronically controllable drive in a modern design Industrial engine Quiet running spindle thanks to new spindle design Machine operation with safety electronics in 24 V direct current Guaranteed concentricity = 0.02 mm in the measured drilling spindle Clockwise/counterclockwise rotation Precision spindle bore Control panel with user-friendly, dirt and water resistant Membrane keyboard RPM display Separate emergency stop button Tapping function Precisely crafted, stable drill table with diagonal T-slotswith all-round cooling water channel, can be tilted sideways by ...
bore capacity in steel (diameter): 30 mmthroat: 270 mmbore stroke: 125 mm: 4 Motor output: 9 speeds: 70 - 2800 U/minColumn drilling machine OPTIdrill DP 33V promotion set / 3020680SETWith an electronically controllable drive in a modern design Industrial engine Quiet running spindle thanks to new spindle design Machine operation with safety electronics in 24 V direct current Guaranteed concentricity = 0.02 mm in the measured drilling spindle Clockwise/counterclockwise rotation Precision spindle bore Control panel with user-friendly, dirt and water resistant Membrane keyboard RPM display Separate emergency stop button Tapping function Precisely crafted, stable drill table with diagonal T-slotswith all-round cooling water channel, can be tilted sideways by ±45° and rotated by 360° Drilling depth stop LED machine light integrated in the drill head V-belt cover with safety switch Thick-wa ...
bore capacity in steel (diameter): 32 mmthroat: 300 mmbore stroke: 150 mm: MK 4 : 480 x 480 mm: 0,1 - 0,2 mm/U: M 22 (St 60) : 35 mm: 80-1170 U/min: 1,45 kW: 0,34 t: 0,8 x 1,0 x 2,0 mAccesories:-Machine light (built-in)-Coolant device in the foot (built-in)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle diameter: 60 mmx-travel: max. 1000 - min. 100 mmy-travel: max. 1000 - min. 100 mmbore capacity in steel: max. 40 mmthread capacity: max. M24 Thickness: max. 60 - min. 5 mmspindle turning speed - stepless: einstellbar 1 - 1.000 U/minfeed stepless: einstellbar, Eilgang 1 - mm/minfeed stepless: einstellbar, Arbeitsgang mm/minfeed power: 16 KNtool taper: SK 40 spindle stroke: 600 mmpositioning speed: in allen Achsen 1 - 10.00 mm/minpositioning accuracy: auf 300 mm = +/- 0,01 mmtable load: max. 500 kgwork height max.: 1000 mmweight of the machine ca.: 4,8 tdimensions of the machine ca.: 3,5 x 3,3 x 3,1 mControl: Bosch CNC plate drilling system HMB PBM1000/60 - W12 for drilling head plates andBase plates in steel construction with tool changer (12x)Number of drilling spindles: 1 pc.Operating Voltage: 220/380VFrequency: 50 HzTotal connection value: 22 kVAThe data for this ad was created ...
bore capacity in steel (diameter): 50 mmbore capacity in cast iron (diameter): 60 mmthreading cutting capacity:: M36 throat: 400 mmbore stroke: 230 mmspindle taper: MK 4 feed range - spindle: 0,1-0,2-0,3-0,4-0,5-0,6 mm/Uspindle turning speed range: 54 - 1032 U/mintransmission ratio: 12 Stufencolumn diameter: 200 mmtable surface area: 550 x 550 mmtotal power requirement: 3,0 kWweight of the machine ca.: 0,72 tdimensions of the machine ca.: 2,6 x 0,6 x 1,2 mEquipment:- Gears made of hardened and ground steel- Front speed selector lever- Gear lubrication by automatic oil pump- Integrated coolant device- Machine lamp- Rotatable and tiltable table- Automatic feed with electromagnetic clutch- Handwheel for manual fine feed- automatic tool ejector- Integrated electrical controls in the drill head- Pushbutton for EMERGENCY STOP- Switch for right / left rotation- Height-adjustable chip protection ...
bore capacity in steel (diameter): 40 mmthroat: 300 mmbore stroke: 170 mm: 4 speeds: 70 - 1400 U/mintable-size: 600 x 450 mmtotal power requirement: 3,0 kWweight: 350 kgdimensions: 1200 x 800 x 2150 mmColumn drilling machine OPTIdrill DP 33V promotion set / 3020680SETWith an electronically controllable drive in a modern design Industrial engine Quiet running spindle thanks to new spindle design Machine operation with safety electronics in 24 V direct current Guaranteed concentricity = 0.02 mm in the measured drilling spindle Clockwise/counterclockwise rotation Precision spindle bore Control panel with user-friendly, dirt and water resistant Membrane keyboard RPM display Separate emergency stop button Tapping function Precisely crafted, stable drill table with diagonal T-slotswith all-round cooling water channel, can be tilted sideways by ±45° and rotated by 360° Drilling depth stop LE ...
Control: Mitsubishi Area of application: Production of chassis components made of cast iron in batches Nodular graphite in one clamping position, production of large series or largerones. Quantities, current cycle time
spindle cone: MK 1 turning speeds: 200 - 3000 U/mintable-size: 300 x 220 mmtotal power requirement: 520 Wweight of the machine ca.: 200 kgdimensions of the machine ca.: 8004001800 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 760 mmy-travel: 460 mmz-travel: 560 mmcontrol: Sinumerik 840 D PL - Shop total power requirement: 19/28 kWweight of the machine ca.: 13 tdimensions of the machine ca.: 12 Lademeter mNo. 4100Bar machining center 5 axes DECKEL MAHO DMC 60 SWorking area: 760 x 460 x 560Drive: 19/28 kWControl: Sinumerik 840 D - Powerline ShopmillNC swivel milling head (B-axis) -120/+30°60-fold tool magazine with taper cleaningNC rotary axis (A-axis) with collet chuck Spanntop 65,Tailstock, hydraulically lowerable,NC bar loader 1100 mmWorkpiece pick-up device with discharge beltProduction package with coolant tank 600 l,INTERLIT SKA 200-760 - IKZ 40 bar through spindle centerChip conveyor, Rotating inspection windowBLUM tool measuring systemOil mist extractionOperating mode 4HSK-A 63 spindle Speed range up to 18,000 min-1Feed rates up to 50 m/minRapid traverse 50 m/minSpace requirement approx. 5 x ...
x-travel: 710 mmy-travel: 500 mmz-travel: 500 mmtable-size: 1080x580 mmspindle taper: SK40 spindle turning speed range: 10000 U/mintool change unit: 30 weight of the machine ca.: 10 tHEIDENHAIN TNC430Coolant through spindlewww.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): x mmbore capacity in steel (diameter): x mmthroat: x mmthroat: x mmbore stroke: x mmbore stroke: x mmPOLYHEDRAL DRILLING MACHINEDrilling range:-Square: Spanner opening 3-27mm-Hexagon: Spanner opening 3-32mmDrilling depth:-Square -14mm-Hexagon-13mmThroath150mmMisc accessoriesMore details on www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 50 mmbore capacity in cast iron (diameter): 60 mmthreading cutting capacity:: M42 throat: 360 mmbore stroke: 200 mmspindle taper: MK 4 feed range - spindle: 0,1-0,2-0,3-0,4 mm/Uspindle turning speed range: 190 - 1900 U/mincolumn diameter: 175 mmtable surface area: 550 x 550 mmtotal power requirement: 4 kWweight of the machine ca.: 0,85 tdimensions of the machine ca.: 2,2 x 0,7 x 1,3 m- large stepless speed range in 3 stages- mechanical speed adjustment with hand lever (model V)- electronic speed adjustment with frequency converter (model VE)- Front digital speed display- Gear lubrication by automatic oil pump VE”- Machine base plate with integrated coolant device- Machine light- MGI rotating and tilting table- Advance and automatic retraction with electromagnetic clutch- Front hand wheel for fine adjustment of the manual feed- Scale with adjustable dr ...
bore capacity in steel (diameter): 34 mmthroat: 300 mmbore stroke: 150 mmbore capacity in cast iron (diameter): 40 mmthread capacity: M 27 spindle taper MT: 4 spindle speeds:: Stufenlos 100 - 2000 U/mincolumn diameter: 125 mmautomatic feeds: 3 / 0,1 - 0,2 - 1,3 table:: 400 x 420 mmDrive: Keilriemen total power requirement: 3 kWweight of the machine ca.: 360 kgdimensions of the machine ca.: 2,3 x 0,6x 1,1 m- Drilling machine of circular column feed automaticmechanical- Drive by electronic wide V-belt- Spindle taper: CM 4- Stepless speed adjustment with frequency converter- Potentiometer for speed adjustment- digital speed display- Automatic feed reversal when threading- Scale with adjustable drilling depth - automatic tool ejector- Push button for EMERGENCY STOP switch for right/left rotation- Electronic control integrated in the drill head - integrated coolant system- Machine light - hei ...
Control Heidenhain 426 Travel X/Y/Z: 500 x 380 x 380 mm Clamping area 500 x 400 mm Tool magazine for 24 Wkz., SK 40 Speed 15,000 min-1 NC rotary and swivel table
Upper support, cross support, cross table, cross slide table-Upper support comes from a Waldrich Coburg portal milling machine type: 12 D 3232-550 HL-Table surface: mm-Travel: x 350 mm/y 220 mm-Dimensions: 1380/1000/H800 mm-Weight: 800 kg
Control unit, control panel, control panel, control unit, foot switch, safety foot switch-Manufacturer: Steute, 2-pedal safety foot switch-Type: C S2 OS/OS-Metal housing: with protective cover, die-cast aluminum-Dimensions: 275/280/H130 mm-Weight: 2.6 kg
Drill, drill press, pillar drill, pillar drill-Manufacturer: Gosmeta, pillar drilling machine type B-30N-Motor: 1.1kw-Speeds: 110 - 920 rpm, 5 levels-Table size: Ø 330 mm, travel 510 mm-Spindle mount: MK3-Spindle stroke: 125 mm-Projection: 300 mm-Columns Ø: 120 mm-Dimensions: 490/750/H1850 mm-Weight: 282 kg
Tool changer chain, chain magazine, tool changing system, tool magazine-Spare part comes: from a machining center BJM type ALBZ-145-Tool change system-CUT changer-RIG changer: RIG 06-12-P003 VX VCP-Drive motors: MGM-Dimensions: 1400/950/H830 mm-Weight: 380 kg
Control unit, control panel, control panel, control unit, keyboard, screen, control, air humidification, dehumidification and evaporative cooling-Module: M4 (large display)-for: Condair CP2-Type: M4-Weight: 0.3 kg
: 1980 tool taper: MK : 205 - 1450 m/min.boring range:: 3 - 40 mm Please note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Drill, column drill, column drill, pillar drill, box column drill, tapping machine, tapping machine -Manufacturer: HIW Helmerding, drill press -Motor: 1.0/1.6kw -Speeds: 95 - 1050 rpm, 8 levels -Feed: 0.08/0.16/0.28 1/rev. -Table size: 500 x 400 mm, travel 685 mm -Spindle mount: MK3 -Spindle stroke: 180 mm -Projection: 280 mm -Dimensions: 1100/650/H2340 mm -Weight: 690 kg
Innovac GmbH
