sheet metal working used for sale (3,284)

Hand lever shears, hand tin snips, tin snips, sheet metal snips-Scissors: 200 mm-Dimensions: 350/100/H710 mm-Weight: 17.6 kg

Bending tool, matrix, upper knife, upper tool, upper beam-Bending tool: from Lotze HDZ swivel bending machine-Length 2678 mm-Hole spacing: 100 mm M10-Dimensions: see the drawing in the photos-Dimension: 2678/15/H57 mm-Total weight: 15.7 kg

Bending tool, die, lower knife, lower tool, lower beam-Bending tool: from Lotze HDZK swivel bending machine-Widening: for lower cheek-Dimensions: 2487 x 100 x 15 mm / 190 x 100 x 15 mm-Hole spacing: 100 x 18 mm-Transport dimension: 2487/100/H30 mm-Total weight: 29.4 kg

Section steel shears, profile shears, punch, punching machine, hole punch-Pressure force: 40 to-Punching-Scissors-to cut-notch-mechanical release-Foot switch: 1-div. Punches and dies-Dimensions: 800/1250/H1800 mm-Weight: 1112 kg

Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper-Sheet metal claws-Span width: 0 to 20 mm-Load capacity: 1000 kg-Number: 1x terminals available-Price: per piece-Weight: 10 kg/piece

Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, profile steel tongs, plate gripper, lifting claw, lifting clamp-Manufacturer: ip, safety lifting clamp type IP N with swiveling support ring-Clamp range: 0-40 mm-Load capacity: 6 t-Number: 6x clamps available-Price per piece-Dimensions: 280/100/H460 mm-Weight: 26 kg/pc.

Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper-Sheet metal claws-Span width: 0 to 15 mm-Load capacity: 1000 kg-Number: 1x terminals available-Price: per piece-Weight: 5 kg

Panel lifting clamp, sheet metal clamp, sheet metal claw, girder clamp, girder claw, sheet metal gripper, material gripper, material gripper-Sheet metal claw-Span width: up to 152 mm-Load capacity: 2500 kg-Number: 1x terminals available-Price: per piece-Weight: 29 kg/piece

Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper-Sheet metal claws-Span width: 3 to 24 mm-Load capacity: 1600 kg-Number: 1x terminals available-Price: per piece-Weight: 14 kg/piece

Bending tool, die, lower knife, lower tool, prism tool -Tool: for press brake -Prisms: 90 ° 10 mm -Prisms: 90 ° 10 mm -Tool: shared -Tool dimensions: 32 x 90 mm -Tool total length: 2430 mm -Transport dimensions: 820/90/H96 mm -Weight: 80 kg

Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper-Sheet metal claws-Span width: 0 to 20 mm-Load capacity: 1000 kg-Number: 1x terminals available-Price: per piece-Weight: 6 kg

Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper-Sheet metal claws-Span width: 1 to 30 mm-Load capacity: 2,500 kg-Number: 1x terminals available-Price: per piece-Weight: 11 kg/piece

Bending tool, die, upper knife, upper tool, straight tool-Tool: for press brake length 2020 mm-Tool angle: radius 5 mm-Dimensions: see drawing in the photos-Dimensions: 2020/27/H95 mm-Weight: 23.4 kg

Carrier claw, sheet metal clamp, sheet metal claw, carrier clamp, sheet metal gripper, material gripper, material gripper, plate gripper, lifting claw, lifting clamp, screw clamp-Manufacturer: Seebeck, sheet metal clamp screw clamp type 76-Clamping range: 8-32 mm-Load capacity: 8 t-Quantity: 1x clamps available-Dimensions: 275/80/H300 mm-Weight: 30 kg

Notching machine, sheet metal notcher, notching shears, corner notching machine, corner shears, corner shears -Max. Cutting capacity: approx. 2 mm -Knife length: 102 mm -Dimensions: 620/590/H1790 mm -Weight: 150kg

Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper-Sheet metal claws-Span width: 1 to 30 mm-Load capacity: 2000 kg-Number: 1x terminals available-Price: per piece-Weight: 10 kg/piece

Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper-Sheet metal claws-Span width: 8 to 25 mm-Load capacity: 2,500 kg-Number: 4x terminals available-Price: per piece-Weight: 12 kg/piece

Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper-Sheet metal claws-Span width: 0 to 35 mm-Load capacity: 4000 kg-Number: 1x terminals available-Price: per piece-Weight: 21 kg/piece

Forge grab, manipulator forge grab, sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal grab, material grab, material grab-Manufacturer: VEB, material gripper type B04-Z10-1-Load capacity: 1,000 kg-Span: see photos-Dimensions: 280/190/H320 mm-Weight: 21 kg

Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper-Sheet metal claws-Span width: 0 to 25 mm-Load capacity: 2000 kg-Number: 1x terminals available-Weight: 14 kg

Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper-Sheet metal claws with plastic insert-Span width: 10 to 25 mm-Load capacity: 1,000 kg-Number: 1x terminals available-Price: per piece-Weight: 20 kg/piece

: 300 kNstroke length max.: 235 mm: 200x24 mmbending capacity max. - round: 60x4,0 mmtoolpiece height max.: 250 mm: 660x1250 mmwork height max.: 900 mmreturn speed: 20 mm/secworking feed: 10 mm/sectotal power requirement: 3 kWweight: 950 kgDomestic equipments:- semi-automatic NC control (99 programs with 16 steps each)- incl. bending bolt (without punch)- Incl. tool holder for dies- incl. foot pedalEquipment:- Stamp, smallest U = 145 mm 85 °   H = 250 mm, R = 5 mm- Quick change Monomatrize 85 °   H = 250 mm, V = 63 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Punching units, punching unit, punching frame, punching tool, non-driven latching and shearing units, forming frame -Handle material: aluminum -Stamping dimension: see photo with dimensions -Quantity: 2 pieces -Price: piece -Dimensions total: 240/145 / H210 mm -Weight total: 22.5 kg / pc.

Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper-Sheet metal claws-Span width: 0 to 40 mm-Load capacity: 2500 kg-Weight: 12 kg

Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper-Sheet metal claws-Span width: 0 to 60 mm-Load capacity: 5000 kg-Number: 2x terminals available-Price: per piece-Weight: 49 kg

Sheet metal clamp, sheet metal claw, carrier clamp, carrier claw, sheet metal gripper, material gripper, material gripper -Sheet metal claws -Span: 50 to 100 mm -Load capacity: 6000kg -Quantity: 1 piece available -Price per piece -Weight: 29kg/piece

Double reel, reel, decoiler, motorized reel for sheet metal processing, punching, eccentric press, hydraulic press, automatic punching machine, motor reel, winding reel, decoiler, sheet metal unwinder-Manufacturer: OBRU, reel height adjustable, with drive-Diameter / width: adjustable, see photos-Dimensions: 750/730 / H1130 mm-Weight: 114 kg

Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper-Sheet metal claws-Span width: 35 to 70 mm-Load capacity: 5000 kg-Number: 3x terminals available-Price: per piece-Weight: 39 kg/piece

sheet width: 3050 mmplate thickness: 13.0 mmthickness at Niro-steel: 8.0 mmwork height max.: 930 mmno. of strokes: 9 - 17 Hub/mincutting angle: 0.5 - 3.0 °down holder: 18 StückControl: SC 100 T engine output: 22.0 kWweight of the machine ca.: 9500 kgrange L-W-H: 4270 x 2200 x 2250 mm Good/well-maintained condition () Current new price approx. 80.000 eurosFeatures:- Electro-hydraulic/sliding table shear- HACO CNC control model SC 100 T” Preset positioning of the backgauge Digital display of actual position Electro-hydraulic cutting angle adjustment Electro-hydraulic cutting gap adjustment LCD display Emergency stop switch- NC electro-motorized backgauge, on ball screws- Hydraulically operated hold-down device- Front finger guard- Ball rollers in the support table Support table with recessed handles- 1x side stop, with mm scale- 1x front support arms- 1x freely movable foot switch- Rea ...

2 column punching tool, separating tool, punching tool, punch, punching die, punching punch, column frame-Punching tool: 2 columns, with 4-digit code-Recording: bolt Ø 38 mm-Stamping stamp: see photos-Dimensions: 450/265 / H305 mm-Weight: 94 kg