sheet metal working used for sale (3,284)

High-precision and versatile punching/nippling machine Boschert Compact 500 CNC Z (built in 2011) – Ideal for flexible sheet metal processing! We sell a powerful and reliable punching/nippling machine from the quality manufacturer Boschert, which convinces with its extended equipment and precision. This machine is the ideal solution for a wide range of Spectrum of punching and nipple tasks, from individual parts to large series. Features that convince: • Manufacturer: Boschert • Type: Compact 500 500 x 1000 CNC Z • Year of manufacture: 2011 • Intuitive CNC control: Multi-axis Ladob control with graphical user interface for easy Programming and visualization of the machining processes. • Extended working range for greater flexibility: o X-axis: 0 - 2000 mm (allows the machining of long workpieces) o Y-axis: 0 - 750 mm (offers generous space for wide sheets) ...

Ideal for repair shops and locksmiths for precise cold and hot bending of flat, round and square steels, stable design for screwing on the workbench, infinitely adjustable bending stop, with Eccentric quick clamping for efficient work, readable bending angle up to 120 degrees, High repeatability due to bending angle stop, Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out. Working width: 100 mm 20 Sheet thickness max. steel: 5 mm Weight/Weight 21 kg Farbe/Colour blau

Key data: 2 mm, 12 mm

Cut-to-length line 2,000 x 12 mm Bandwidth. 2,000 mm Tape thickness... 4-12 mm Coil weight 30 tons. Straightener 11 reels Speed 15 m/min. Main Engine. 200 KW Voltage. 380 V / 50 Hz.

chamfer lenght: 0900 mmplate thickness: mmdistance between columns: 900 mmpressure: 20 tcolumn arm: 230 mmstroke length max.: 150 mmtravel -x axis: 350 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Slitting line 2,100 x 14 mm Bandwidth... 2,100 mm Strip thickness 4-14 mm Coil weight.. 35 tons. Coil Diam. I 508-810 mm Coil Diam. Rewinder 750 mm Coil A Dia. 2,000 mm Knife shafts diameter 380 mm Connected load 660 KW

Key data: 2 mm, 10 mm

Sheet Straightener 2,000 x 10 mm Execution.. 4high Blechdicje . 3-10 mm Straightening rollers.. 13 pcs. Straightening rollers durcm.. 145 mm Support rollers Duchm 290 mm Weight... 32,000 kg Drive mot... 30 KW

5 processing stations, Production width: 230 - 1250 mm, Production length: 500 - 2400 mm, Material thickness: 0.63 - 1.0 (1.5)mm, Material type: Steel 1203 bare, Mains voltage: 400 V 50 Hz, Power: 150 kW, hydraulic pressure: max. 150 bar, Air pressure: max. 10 bar. The control system was renewed by SIEMENS.

Slitting line 500 x 0.3-2.5 mm Coil weight . 7 to. Coil I diam 508 mm Coil A Dia. 1,300 mm Coil I Dia. Expenditure. 400 mm Strip number 2-25 Speed 1-150 m/min. Working Guidelines right/left

Coil turner, usable as a stand-alone machine for dressing coils of all kinds, or at the end of a slitting line for setting up sliced coils as a transfer for a coil packaging system.

Key data: 2030 mm, 3 mm

Machine type: Folding machine Manufacturer: KRAMER Type: Amaut III 2000 Year of Make: 1985 Condition: used Offer will only be sent if a complete imprint is provided! Price VB Location Warstein , Germany Reference number M-KRA-0126-2 DESCRIPTION We offer you a used folding machine from the manufacturer Kramer. Bending length max. 2000mm Power max. 3.00mm Backgauge Availability: from week 3 2026 Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions of payment. Errors in the descriptions and offers are reserved!

Shear force 60 t Punching force 40 t Profile steel shears L- and T-irons at 90° 100 x 10 mm at 45° 65 x 8 mm Notching device with square notch for sheet metal up to 10 mm Flat steel shears for flat steel 380 x 8 mm or 150 x 14 mm Weight: approx. 1.5 t Dimensions: approx. 1.7 x 1.05 x 1.98 m Accessories - Electrical contact stop 3000 mm - Anchor table - Adjustable hold-down device - Tool package Validity of the security check until Feb. 2026

: neu : ca. 12 - 14 Wochen ab Auf : Italien : 4010 mm: 2 mm: 2 mm: 1.5 - 2 mm: 5 : 5 : 1000 mmfully automatic bending in two ways without the need to rotate the sheethydraulic driveBMS MULTI-Touch with automatic depth stoppowered rotary shearadditional rail on the bending beammaterial support2x foot pedalsafety equipment accoring to the control rules BG Germany3 year warranty on stands and tension arms.Quality Made in Germany.FURTHER MODELS FROM3 UP TO12 M LENGTH AND FROM 1,25 MM UP TO 2,00 MM BENDING CAPACITY ON REQUEST.OPTIONS: Preserving material support made out of synthetics price on request Hydraulic radius adjustment (air gap adjustment)the bending capacitiy of aluminium rises up to 2,5mm price on request Extended depth 20 - 1.250 mm price on request Conical depth stop to bend conical profiles andnarrow/wide bendings for easy intermateing price on request Fully automatic gripper  ...

Bending tool, die, lower knife, lower tool, prism tool -Tool: for press brake, 7-piece set -Total length: 1053 mm / each 1x 238/58/390/100/270 mm / 2x 75 mm -Width/Height: 97 mm -Weight: 75 kg

Bending tool, die, lower knife, lower tool, prism tool -Tool: for press brake -Total length: 285 mm -Width/Height: 100/120 mm -Dimensions: see drawing in the photos -Weight: 23.7 kg

Bending tool, die, upper blade, upper tool, straightening tool -Tool: for press brake -Length: 250 mm -Width/Height: 65/155 mm -Dimensions: see drawing in the photos -Weight: 7.7 kg

Bending tool, die, lower knife, lower tool, prism tool -Tool: for press brake -Total length: 160 mm -Width/Height: 30 mm -Dimensions: see drawing in the photos -Weight: 0.7 kg

Bending tool, die, lower knife, lower tool, prism tool -Tool: for press brake, 3-piece -Total length: 143 mm / 1 x 28/45/70 mm each -Width/Height: 30 mm -Dimensions: see drawing in the photos -Weight: 0.7 kg

Offer 25455 Hydr . Flat profile and bar steel shears with notching device and hole punch Technical data: - Flat steel shears cut up to 300 x 15 mm - Profile steel shears - Cuts L-steel at 90° to 120 x 12 mm - Steel bar shears - Cuts round steel up to 40 mm - Square steel up to 35 mm - Notching device - with square notch. 100 x 42 x 10 mm - Hole punch - punching force 600 KN - With stop table - Projection 220 mm - Punches in steel up to 28 mm Ø in 15 mm - or 38 mm Ø in 11 mm - various punches + dies, - Drive 400 V / 4 kW - Space requirement approx. W 600 x H 1550 x D 1500 mm - Weight approx. 1300 kg

Punching force: 1000 kN Projection: 760 mm For example, punch a 40 mm hole in 22 mm steel Stroke release via foot switch Quick-change device Range of tools is included in the price 3000 kg

Offer 25437 Technical data: - Pressure capacity 500 KN - Stroke infinitely adjustable 10 - 32 mm - Stroke rate 22 - 27 1/min - Projection 510 mm - Installation height 350 mm - Drive 400 V / 4 kW - Holes e.g. up to 27 mm Ø in steel 14 mm - With special punching saddle, e.g. up to 39 mm Ø in steel 9.5 mm - e.g. up to 90 mm Ø in steel 4 mm - Space requirement approx. W 700 x H 1700 x D 1200 mm - Weight approx. 1150 kg - with: - Hydr. Low-Pressure Grain Locator - Long punch holder for punching in sectional steel - Roller conveyor with plier feed control PEHU 101 - Roller conveyor approx. 6000 mm - Footswitch - Emergency stop button

Offer 25507 Technical data: - Max. working width 2520 mm - Max. material thickness 2.0 mm - Cutting angle 2.2 ° - Stroke rate up to 25 1/min - Back gauge with ELGO positioning control up to 750 mm - Table height 850 mm - Front angle stop 2000 mm - 2 front support arms 1000 mm - pneum. Supported sheet metal hold-up - E-footswitch - Typing - Single stroke pre-selectable - Rear protection grille - Drive 400 V / 3 kW - Space requirement approx. W 3450 x H 1150 x D 2200 mm - Weight approx. 1600 kg

FEEDSTOCK STEEL STRIP  sheet thickness max.: 4 mm  sheet thickness min.: 0.8 mmPRODUCT (PROFILE, TUBE)  external diameter min.: 24.9 mm  external diameter max.: 60 mm  wall thickness min.: 0.8 mm  wall thickness max.: 4 mmLINE CHARACTERISTICS  Forming Process: rollforming   welding process: HF inductive   sawing process: travelling system consisting of:- large coil reel- Bandschweisseinrichtung- optional: horizontal band loop- side planer- forming unit- HF welding unit- units for outside scarfing, inside scarfing - each without impeders, tooling- cooling section- calibration unit  with alternative calibration station for ovals, polygons- flying saw- chip blow unit- hexagon bundling- and binding unitoptional roll-sets available for:forming section:26,30, 32, 36, 38, 40, 44, 46, 52, 60 mmcal ...

sheet width: 3200 mmplate thickness: 2,5 mm: 1,25 x Blechdicke : ca. 6 x Blechdicke : 200 mm: 80 mm: 0-180 Grad: 15,5 mm/sec: 3 kWweight: 3.800 kgrange L-W-H: 4100x100x1400 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

FEEDSTOCK STEEL STRIP  sheet thickness max.: 4 mmPRODUCT (PROFILE, TUBE)  external diameter max.: 51 mm specifically suitable for the welding of USM furniture tubes -Large reel without storage-Strip welding device-Side planer-Calibrating roll stand-Forming unit-HF welding unit THERMOTOOL-Unit for scraping without tools -Cooling section-Calibrating unit-Flying saw-Removal section for manual removal-Roller sets for 19, 20, 25, 35.9, 36, 37, 40.8, 41 mm-Various accessories and machine-specific spare parts-Documentation and maintenance logs-CE declaration

sheet width: 3050 mmplate thickness: 10 mmcutting angle: 0,5-3 °Number of hold downs: 18 Stückno. of strokes: 22/7 Hub/minwork height max.: 900 mmtotal power requirement: 20 kWweight of the machine ca.: 8.500 kgdimensions of the machine ca.: 3800 x 2100 x 2100 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1270 mmplate thickness: max. 4,5 mm: 4 mmroll diameter: 120 mmroll speed: 8 U/minmin. bending diameter: 180 mmtotal power requirement: 2,2 kWweight of the machine ca.: 1250 kgdimensions: 2470 x 750 x 1000 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3100 mmplate thickness: 6.0 mm STpre-bending: 4.0 mm STdiameter of upper rolls: 200 mmside roll diameter: 165 mmdiameter of lower rolls: 190 mmbending speed: ca. 5.0 m/minControl: DIGI oil volume: 80.0 Litervoltage: 380 Vtotal power requirement: 6.0 kWweight: 6000 kgrange L-W-H: 5250 x 1500 x 1400 mm very good condition () Current new price approx. 80,000 euros Special price on requestFeatures:- Robust electro-hydraulic 4-roll bending machine 4-roll concept offers a wide range of bending and rounding options- MG swivel control panel Operation - control of all rolls and machine axes Digital position display Manual operation via joysticks- Two central rolls are driven directly by hydraulic motors- Conical rolling possible via inclined position of the rolls- Parallelism of the side rollers via torsion shafts- Bending on both sides- Diameters of up to 1.1 times the upper roller ...

: gebraucht : 2023 : 5542 : prompt, Zwischenverkauf v : Italien : 11600 €: 1 : 1300 mm: 150 mm: 150 mm: 250x350 mm: 945 mm: 0.75 kW: 1400 mm: 1000 mm: 1450 mm: 300 kgDemo machine / mint conditionNet price (price for new machine € 13.600,00)Easy T is a manually operated deburring machine suitable for various metalworking processes such as grinding, deburring, edge rounding and polishing for various types of materials - stainless steel, steel, copper, brass and aluminum.The grinding head with two rotating tools (grinding wheel or brush) is mounted on a swivel arm.The Easy T is equipped with a freely adjustable speed and a vacuum system, so that workpieces are fixed on the table. It is a cost effective and effective solution for conventional grinding and deburring. All edges of the workpiece are machined from all angles and directions. The grinding head can be swiveled through 180 ° an ...

table length: 3048 mmtable width: 1524 mmburner heads: 1 stroke: 270 mmspeed: 100 m/mindimensions: 8900 x 2260 x 2220 mmweight of the machine ca.: 7.500 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Stock number: 4017 PROFILE BENDING MACHINE Manufacturer: Roundo , Type: R4 Machines NO.: 1735, Year of manufacture: 1977 Specifications: Angle steel 90x9 mm Flat steel 200 x 30 mm Frame steel upright 100 x 18 mm Round steel 60 mm Load by steel 40 Kg/mm2 30 cm3 Upper roller 275 mm Ø Shaft dia. 105 mm Square steel 55 x 55 mm T-steel 90x10 mm Total power 5.5 kW Length: 1500 mm, Height: 1400 mm, Width: 1400 mm, Weight: 2500 kg