subcategories
(3rd category level)
Manufacturer:
(Category: 107)
Profile steel shear, profile shear, punch, punching machine, hole punch, hydraulic flat/profile and bar steel shear -Manufacturer: Mubea, hydraulic profile steel shear type HIW1000 -Drive: hydraulic -Pressure force: 100 tons -Equipment: large support table with stops for die-cutting, various stamps and dies -Production: Punching, shearing, cutting, notching -Dimensions: 2360/760/H1800 mm -Weight: 2700 kg
pressure: 35.0 tchamfer lenght: 1250 mmdistance between columns: 1095 mmstroke - stepless adjustable: 215 mmcolumn arm: 410 mmtable height: 800 mmdayligth: 455 mmworking feed: 10.0 mm/secreturn speed: 56.0 mm/secwork height max.: ca. 875 mmControl: DM 51 Number of working hours: ~ 13.300 hoil volume: 80.0 loperating pressure: max. 240 barvoltage: 380 Vtotal power requirement: 4.0 kWweight: 2500 kgrange L-W-H: 1700 x 1450 x 2250 mmFeatures:- Robust CNC-controlled hydraulic press brake- With DELEM CNC control unit DM 51” Positioning of the backgauge (X axis) Positioning of the depth adjustment (Y1+Y2 axis) Program + tool storage possible Swiveling control panel, front left- CNC electric motor-driven backgauge (X axis)- CNC electric motor-driven height adjustment of the stop (R axis)- 2x manually adjustable stop fingers- 1x split set of deer foot tools - top- 1x split set of Multi V tools ...
Offer 25500 Specifications: - Cutting length 3050 mm - Cutting thickness at 400 N/mm², strength 13 mm - Cutting thickness at 400 N/mm², strength up to 1000 mm, length 15 mm - Cutting angle 0.5 - 3 ° - Number of sheet hold-downs 18 pcs - Stroke rate 10 - 23 min -Mot. Back gauge up to 1000 mm - Rear area protection with light barrier - Front angle stop 1000 mm - HSLX version: - CNC control HACO SC 5 controller when entering the sheet thickness in mm -Auto. Cutting angle adjustment according to sheet thickness - Cutting length limitation -Auto. Positioning of the backgauge (8 programs – 80 sets) with - Digital display and autom. Backgauge retraction - Possibility of mot. Adjustment of the backgauge by 2 push buttons - Drive 400 V / 22 kW - E - Footswitch - Space requirement without support arms approx. W 4200 x H 2250 x D 2200 mm - ...
Bending tool, die, upper knife, upper tool, deer foot tool, deer foot tool for press brake -Tool: for press brake -Dimensions: 20 x 160 mm -Recording: 35 x 31 mm -Length: 2680 mm -Weight: 110 kg
Bending tool, die, upper knife, upper tool, deer foot tool, deer foot tool for press brake -Tool: for press brake -Tool radius: 5 mm -Dimensions: 45 x 220 mm -Length: 2400 mm -Weight: 120 kg
Bending tool, die, upper knife, upper tool, deer foot tool, deer foot tool for press brake -Tool: for press brake -Tool radius: 8.5 mm -Dimensions: 50 x 180 mm -Recording: 15 x 17 mm -Length: 3250 mm -Weight: 140 kg
Bending tool, die, upper knife, upper tool, deer foot tool, deer foot tool for press brake -Tool: for press brake -Tool radius: 13.5 mm -Dimensions: 50 x 180 mm -Recording: 15 x 17 mm -Length: 3250 mm -Weight: 140 kg
Bending tool, die, lower knife, lower tool, prism tool -Tool: for press brake -Prisms: 90° 5/8/9/12 mm -Square: 54 x 45 mm -Length: 2550 mm -Weight: 70 kg
Bending tool, die, lower knife, lower tool, prism tool -Tool: for press brake -Prisms: 30° 12 mm -Square: 80 x 80 mm -Length: 2500 mm -Weight: 120 kg
Long knife, sheet metal and round steel shears-Sheet metal shears: stable-Material: flat steel-Round: up to 15 mm-Square: up to 15 mm
Beading machine, flanging machine, seam closing machine, motorized beading machine -Max. Sheet metal capacity: 1.25 mm -electrically driven: 1.1 kW -Projection: 50 mm -Dimensions: 900/800 / H1100 mm -Weight: 250 kg
Electric clutch, electromagnetic clutch for guillotine shears, tin snips, tin guillotine shears, crank guillotine shears, eccentric press -for: guillotine scissors crank guillotine scissors -Equipment: clutch, transformer, control -Manufacturer: LABOD electronic -Type: GN 6 DZ.4Q.80 -Total net weight: 160 kg
Sheet metal package pallet, sheet metal traverse, sheet metal package shelf -Load capacity: 10 to -for crane/forklift operation -Dimensions: 3000/1800/H420 mm -Number: 3x available -Price: per piece -Weight per piece: 300 kg
Punch, punching machine, punching device, hole punching machine, row punch, punching unit, Mehrkopfpstanze, punching system, -Distribution: 8 x punching pairs with a distance of 60 mm (O 4 mm) -Distance between the two outer punch pairs: 975 mm - Distribution: distance 75 - 165 - 165 - 165 - 165 - 165 - 165 - 75 mm -Max. Passage width: 1000 mm -Drive: electric -Weight: 260 kg
Punch, punching machine, punching device, hole punching machine, row punch, punching unit, multi-head punch, punching system, -Number: 5x punching -Max. Width: 1000 mm -Tool built-in: 8x45 mm -Distance punch: 187 mm -driven: electric -Weight: 280 kg
material width: 1250 mmmaterial thickness: 12,00 mmno. of straightening rolls: 19 sheet thickness - min.: 0,50 mmdiam. of the rolls ca.: 50 mmsheet length min.: 100 mmwork height max.: 900 mmspeed ca.: 2 - 20 m/min.total power requirement: 31 kWweight of the machine ca.: 16,50 tdimensions of the machine ca.: mThe straightening machine HÄMMERLE is suitable for the precision alignment of parts.The hydraulically controlled guard locking also allows good judging resultscomplex geometry.Infeed and outlet roller table inclusiveDimensions (L / W / H, approx.)Rectifying unit / frame 2300 x 3200 x 1800 mmHydraulic 1600 x 900 x 1800 mmSwitch cabinet 600 x 400 x 1900 mmTank capacity 400 lOil filling by the customerThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
plate thickness: 2.5 mmthroat: 260 mmdistance between roll centers: 92.0 mmweight: 295 kgrange L-W-H: 1200 x 700 x 1200 mmEquipment:- robust beading machine with motor-driven rollers- Lower shaft with adjustable stop- for the economical production of a wide variety of bead types- high accuracy thanks to precision-mounted shafts- Clearly arranged switching elements- Base frame equipped with storage compartment- powerful drive motor, even under continuous load- mobile foot switch for clockwise and counterclockwise rotationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Die cutter, punching machine, punching device, hole punching machine, hole punch, copy punch, stop punch, hole punch, eccentric punch, row hole punch, punching machine, punch press -Box tube punch: 50 x 30 mm -Round tube punch -Coordinates stop -Projection: 155 mm -various tool with you -Punch quick change system -Page and depth stops -Max. Punching capacity: 36 t -2x quick change tool carrier -Weight: about 2000 kg
Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Sheet metal claws -Span width: 0 to 30 mm -Load capacity: 3000 kg -Number: 2x terminals available -Price: per piece -Weight: 14 kg/piece
Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Sheet metal claws -Span width: 3 to 24 mm -Load capacity: 3000 kg -Number: 2x terminals available -Price: per piece -Weight: 14 kg/piece
Die holder, notching tool, punching tool, punch, punching die, punching die, punching die, round die-Manufacturer: Mubea, punching die round die Ø 52 mm-Type: Mubea 52-Total dimensions: Ø 150 x 40 mm-Weight: 4.7 kg
Die holder, notching tool, punching tool, punch, punching die, punching punch, punching die, round die, die reduction -Manufacturer: Mubea, punching tool holder die reduction -Type: 105 - 80 mm mounts -Dimensions total: Ø 150 x 60 mm -Weight: 4.7 kg
Pad for folding tool, bending tool, die, lower blade, lower tool, prism tool, turning prism, 1-piece die block for press brake, die tool, folding tool-Pad for press brake tool: from press brake Promecam STPC 250 40 121-Length: 4200mm-Dimensions: see the drawing in the photos-Dimensions: 4200/106/H106 mm-Weight: 212 Kg
Die holder, notching tool, punching tool, punch, punching die, punching die, punching die-Manufacturer: Mubea, punch Ø 90 mm-Type: Mubea 90 holder Ø 50 mm-Total dimensions: Ø 90 x 115 mm-Weight: 3.4 kg
Punching tool, punch, scraper, hold-down device-Scraper: hold-down device for punching-Holder: Ø16 x 210 mm-Dimensions: 265/100/H95 mm-Weight: 3.1 kg
Die holder, notching tool, punching tool, punch, punching die, punching punch,-Manufacturer: Mubea, punching tool square Ø 75 mm-Type: Mubea 75 5-9 holder Ø 50 mm-Die: Ø 150 mm-Total dimensions: Ø 150 x 120 mm-Weight: 6,6 kg
Bending tool, die, upper knife, upper tool-Tool: for press brake, 4 pieces-Tool: 90°-Dimensions: 98 x 27 mm-Dimensions: see the drawing in the photos-Total length: 1977mm-Lengths: 2x 1015/ 1x 545 / 1x 417 mm-Transport dimension: 1015/200/H55 mm-Weight: 42.6 kg
Die holder, notching tool, punching tool, punch, punching die, punching punch,-Manufacturer: Mubea, punching tool Ø 60 mm-Type: Mubea 60 5-12 holder Ø 50 mm-Die: Ø 150 mm-Total dimensions: Ø 150 x 120 mm-Weight: 6.7 kg
Console, device, clamping angle, clamping table, clamping plate, support console-Support consoles: 2 pieces, from press brake Promecam STPC 250 40 121-Support table extension: adjustable in height-Dimensions each: 1070/300/H760 mm-Transport dimension: 1150/790/H310 mm-Total weight: 96 kg
Folding former, folding machine, form folding machine, profiling machine, profiling system, slat production, blind production, dryer, infrared dryer, powder coating-Handover: as is as seen-Connection plug damaged: see photos-Tryer: used for powder coating slats/blinds production-Dimensions: 1650/570/H285 mm-Weight: 124 kg
Heinz Sanders GmbH
