sheet metal working used for sale (3,283)

Key data: 1250 mm, 3 mm

Plate bending machine 2-roll pinch total bend in one-turn. Make Faccin model HCU 1250 x 3 mm year 2009 Plate sheet max width 1200 mm Plate thickness up to 3 mm Machine fully hydraulic operated Hydraulic power unit with 5,5 kw electric motor Top roll size 100 mm Lower pinch roll size 350 mm urethane rubber coated Automatic rolling sequence programmable Vertical support hydraulic adjustable to the diameter to hold in place the round formed plate. Set of mandrel tubes interchangeable slip-on to change the rolling diameter Console electric commands for manual use and automatic programmable bending cycle Safety and emergency stop system installed Manuals and schematics with the machine

: neu : 2024 : 080043 : prompt, Zwischenverkauf v : Türkei : 5900 €: 113.87 €: 1 : 1250 mm: 1.25 mm: 0.8 mm: 2 mm: 150 °: 500 mm: 200 mm: 1500 mm: 750 mm: 1715 mm: 315 kg: geteilt, 45° : Verstellbereich 35 mm Sectioned upper- lower- and bending tool, material 42CrMo4, hardened to 60HRCManual back gaugeAdjustable angle gaugeShelve and box for toolsMachine on rolls with brakesOperating manual in German or EnglishThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Table shear cutting blade, replacement blades for table shears, replacement cutting edges, cutting blades, shear blades -Manufacturer: Hezinger, Replacement cutting blades for Atlantic ATS 3006 guillotine shears, 2 pieces -Cutting length: 3120 mm -Hole spacing: 195 mm / M14 see photos -Dimensions: 50/20/3120 mm -Price/Fee: complete -Transport dimensions: 3120/40/H50 mm Total weight: 45 kg

sheet width: 3050 mmplate thickness: 4 mmweight of the machine ca.: 6.500 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 1,7 mmroll diameter: 50 mmDimensions (L/W/H): 1600 x 600 x 1500 mmweight of the machine ca.: 400 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Trumpf TruLaser 1030 - Laser Cutting Machine - B&R Automation PC 820 CNC control - TruCoax 2500 Laser - Serviced annually by Trumpf (last service July 2025) - Year of construction 2010 Technical data Working Range: - X-axis: 3078 mm - Y-axis: 1550 mm - Z-axis: 76 mm Max. material thickness: - Mild steel: 16 mm - Stainless steel: 8 mm - Aluminum: 6 mm Speed: - Max. cutting speed: 40m/min - Cutting acceleration: 2 m/s² - Positioning acceleration: 9 m/s² Accuracies: - Smallest programmable travel dimension: 0.001 mm - Position deviation: ± 0.1 mm/m - Average position spreading width: ± 0.03 mm Laser: - Max. laser power: 2500 W - Wavelength: 10.6 μm - Power stability: ± 2% - Power distribution: TEM00 Compressed air consumption: - Standard cutting edges: 333 l/min - Pneumatic cutting: 500 l/min Electrical data: - Drive type: maintenance-free three-ph ...

pressure: tplate thickness: mmno. of strokes: Hub/mintotal power requirement: kWweight of the machine ca.: trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Deutschland : 1.5 mm: 2 mm: 1.5 - 2 mm: 6 : 6 : 1130 mm: 180 mm: 915 mm: 3 kW: 5550 mm: 6200 mm: 1435 mm: 1460 mmstandard controladditional rail on the bending beam2x foot pedalremoveable material supportsafety equipment accoring to the control rules BG GermanyStands and tension arms are made of high quality ductile cast iron eliminating any possibility of cracking, breaking, twisting, warping or other distortions.3 year warranty on stands and tension arms.Quality Made in Germany.Further models on request.SeriesBM from3 up to12 meter lengthe and max. thicknessfrom1 up to1,5 mm steel.OPTIONAL EQUIPMENT: manual rotary shear price on request Powered rotary shear St/Al 1,25/1,5 mm price on request Powered rotary shear with cutting head ",S", St/Al 1,5/2,0 mm price on requestCONTROLBM 10 7-inch display, presetting of up to 10 different angles pric ...

This VOORTMAN V304 was manufactured in 2015. A robust plasma cutting machine, its ideal for precision cutting tasks. Consider the opportunity to buy this VOORTMAN V304 plasma cutting machine. Contact us for further details.

This 3-axis Bodor P3015 was manufactured in 2019 and is a robust fiber laser cutting machine. It features a 1.5 kW fiber laser, capable of cutting a variety of materials including carbon steel and aluminum, with a cutting area of 3000 mm x 1500 mm. It includes a Bodor CNC control system and an exchange table. If you are looking to get high-quality sheet metal cutting capabilities consider the Bodor P3015 machine we have for sale. Contact us for more information.

This 4-axis Vimercati PHSI 100x3050 press brake was manufactured in 2005. It features a working width of 3050 mm, motor power of 9 kW, and a pressing force of 100 tons. The machine dimensions are 3500 x 2000 x 2700 mm, and it weighs 9700 kg. It includes a fully refurbished Cybelec control system. Consider the opportunity to buy this Vimercati PHSI 100x3050 press brake. Contact us for more information about this machine.

This 6-axis AMADA HD 1303 NT press brake was manufactured in 2012. It features a press capacity of 1300 kN, a bending length of 3110 mm, and a stroke of 250 mm. With a throat depth of 420 mm and speeds up to 200 mm/s, its designed for efficient operation. Consider the opportunity to buy this AMADA HD 1303 NT press brake. Contact us for more information about this machine.

This AGTOS blasting system was manufactured in 2018. Designed as a deburring machine, it efficiently removes burrs from various materials, enhancing surface finish and part accuracy. Ideal for operations requiring precise deburring. Contact us for more information about this machine.

This 5-axis TRUMPF TrumaBend V130 press brake was manufactured in 1998. It features a 3-meter bending length and a 130-ton capacity, with a stroke of 215mm. If you are looking to get high-quality bending capabilities, consider the TRUMPF TrumaBend V130 machine we have for sale. Contact us for more information about this machine.

This BLEMAS EURO 160 press brake was manufactured in 1993. It features a press force of 160t and a bending length of 3m. The stand passage is approximately 2.5m, and it is equipped with a Cybelec control system. The machine is ready for immediate use, with cylinders that have been re-honed and sealed. Contact us for more information about this machine.

This TRUMPF TruPunch 1000 (S19) was manufactured in 2018. It features a closed machine frame, hybrid axis system, and a linear magazine with 20 spots for clamps and tools. Equipped with maintenance-free 3-phase servo motors and a TRUMPF control based on Bosch Rexroth IndraMotion MTX, it offers advanced punching capabilities and efficient operation with only 16,000 work hours. Contact us for more information about this machine.

This Warcom DINAMICA 100.30 press brake was manufactured in 2016. It features a maximum force of 100 Ton, a working length of 3200 mm, and a motor power of 11 kW. Weighing 10,500 kg, it operates with a maximum working pressure of 250 bar. If you are looking to get high-quality bending capabilities, consider the Warcom DINAMICA 100.30 machine we have for sale. Contact us for more information about this machine.

This AMADA ENSIS-3015 AJ Fiber Laser cutting machine was manufactured in the year 2021 in France and has 19829 production hours, of which 8457 are cutting hours. It is equipped with an AMADA AMNC3i control unit. The machine has a laser power of 6,3 kW.

This 3-axis Finn-Power LPE5 SWUH punch-laser combination was manufactured in 2002. It features a Siemens Sinumerik 840D CNC, a ROFIN-SINAR laser with 2.5 kW power, and a servo-electric punching force of 20 tons. The work surface is 2500×1250 mm, and it includes 20 tool stations with a max tool diameter of 89 mm. Consider the opportunity to buy this Finn-Power LPE5 SWUH punch-laser combination. Contact us for more information about this machine.

This KOIKE PNC-12 EXTREME plasma cutting machine was manufactured in 2015. It features a robust CNC control system and an effective cutting area of 1500 x 3000 mm. Capable of handling a maximum cutting thickness of 50 mm and equipped with rapid travel speeds up to 4000 mm/min, it ensures efficient operation. Consider the opportunity to buy this KOIKE PNC-12 EXTREME plasma cutting machine. Contact us for more information about this machine.

This 6-axis PEDRAZZOLI Bend Master 42 MRV IMS CNC was manufactured in 2001. It features a max tube diameter of 42 mm, a min tube diameter of 6 mm, and a max bending radius of 270 mm. With a power of 22 kW and a bending length up to 3000 mm, consider the opportunity to buy this PEDRAZZOLI Bend Master 42 MRV IMS CNC roll bending machine. Contact us for more information about this machine.

This HILALSAN Advanced Cap 3320 was manufactured in 2019. It features a pressing force of 320 tons, a bending length of 3100 mm, and a stroke of 365 mm. With a throat depth of 510 mm and a main motor power of 30 kW, its ideal for heavy-duty press brake tasks. Only 351 operating hours. Contact us for more information.

This Metallkraft HTBS PRO 3113 was manufactured in 2022. Its a hydraulic shearing machine designed for precise cutting of steel and stainless steel plates up to 13 mm thick. Features include a CNC-controlled back gauge, motorized cutting gap and angle adjustment, and built-in LED lighting for enhanced visibility. Ideal for industrial settings requiring high precision. Contact us for more information about this machine.

This Thermal Dynamics UltraCut 200 was manufactured in 2012. It features a robust output current range of 10-200 A and a duty cycle of 100% at 200 A, ensuring continuous operation. The cutting capacity on mild steel reaches up to 40 mm with a maximum edge start of 65 mm. It includes a liquid-cooled XT-300 precision torch and a DFC-3000 digital gas console with touchscreen. For more information about this machine, please reach out to us.

This TRUMPF Trumatic L6050 was manufactured in 2006. A robust laser cutting machine featuring a SIEMENS SINUMERIK 840D controller, it handles a maximum workpiece weight of 1.900 kg. It efficiently cuts through mild steel up to 20 mm, stainless steel up to 15 mm, and aluminium up to 10 mm. Ideal for large-scale operations with a working area of 6.000 x 2.000 mm. For more information about this laser cutting machine, please reach out to us.

This fiber laser cutting machine was manufactured in 2006. A Bystronic ByStar 4020 with ByLaser 4400, it features a work table of 4064mm by 2032mm and can handle a maximum load of 1580kg. Its specialized for stainless steel and aluminum with a laser power of 4400kW. If you are looking to get high-quality cutting capabilities, consider the Bystronic ByStar 4020 machine we have for sale. Contact us for more information.

This 4-axis Baykal APHS 31440 press brake was manufactured in 2020. It features a pressing force of 440 tons, a bending length of 3100 mm, and a stroke length of 330 mm. With a motor power of 35 kW and a machine weight of 23500 kg, it includes CNC crowning and a European clamping system. If you are looking to get high-quality bending capabilities, consider the Baykal APHS 31440 machine we have for sale. Contact us for more information.

This Finn-Power LP6 was manufactured in 2007. A robust punching machine featuring a hydraulic punch with a 30-ton capacity and a turret hosting 20 stations, including two Multi-Tool stations. It has a large working area of 3000x1500mm, ideal for extensive production needs. Consider the Finn-Power LP6 machine we have for sale. Contact us for further details regarding this punching machine.

This Baykal BPH 1503 + Hypertherm HPR 130 Plasma Cutting machine Machine was manufactured in the year 2012 and has 18000 production hours. It is equipped with a Baykal control unit.

This LVD DELTA 1500 LB was manufactured in 2000. A robust CNC punching machine, it offers reliable performance for your sheet metal operations. Consider the opportunity to buy this LVD DELTA 1500 LB CNC punching machine. Contact us for more information.