Manufacturer:
(Category: 101)
Drilling capacity steel/cast iron: 50mm/60mm, spindle axis-column distance min./max.: 350mm/1600mm, spindle end-working surface distance: 350mm-1250mm, horizontal traverse: 1250mm, column arm vertical travel: 580mm, column diameter: 350mm, arm swivel: 360°, speed: 2000rpm, spindle travel: 315mm, torque: 392Nm, feed force: 15.6kN, machine dimensions X/Y/Z: approx. 2500mm/1250mm/3250mm, weight: approx. 3500kg. The coolant pump, the seal retainer and the measuring system are defective. Documentation available. An inspection on site is possible.
A vertical CNC 3-axis machining center Hurco is available. Travel X/Y/Z: 610mm/510mm/610mm, table dimensions X/Y: 760mm/510mm, max. table load: 700kg, spindle interface: SK40, speed: 10000rpm, rapid traverse: 30m/min, feed rate: 15m/min. Machine dimensions X/Y/Z: approx. 3500mm/2000mm/2750mm, weight: approx. 4500kg, operating hours: 68619h. Documentation available. An on-site inspection is possible.
x-travel: 500 mmy-travel: 450 mmz-travel: 400 mmcontrol: iTNC 530 HeidenhainMain spindle:: turning speed range - main spindle: max. 14.000 min/-1power capacity - main spindel: 18,9 / 14 kWmax. Torque: 100 / 74 Nmtool taper: HSK A 63 NC-Rotary table:: table surface area: 630 x 500 mmmax. table load: 200 kgSwivel range: -110 / +5 °rotation range: 360 °T-slots: 7x 14 x 63 mmtool magazin:: number of toolpositions: 30 pos.tool taper: HSK A 63 max. tool weight: 6 kgmax. tool diameter: 80 mmmax. tool-dia with free toolbox: 130 mmmax. tool length: 300 mmfeeds:: rapid traverse: 24 m/minFeed force: 4,5 kNfeed speeds: 1 - 24.000 mm/mintotal power requirement: 26 kVAweight of the machine ca.: 5,0 tdimensions of the machine ca.: 3,5 x 3,5 x 2,8 mDocuments: Coolantsystem: elektr. hand wheel: tool setting: Heidenhain TT 140 Operation mode 4: Signal lamp - 4 colour: Chip-Tray: inkl. Chip con ...
bore capacity in steel (diameter): 50 mmarm length: 1250 mmworkpiece height max.: mmtotal power requirement: 4 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Comes with various tools. Auction-ID: A1-43691-80
arm length: 1450 mmtaper MK: 4 Cube: ja weight of the machine ca.: 3 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 40 mmthroat: 345 mmbore stroke: 200 mmtable surface area: 720 x 560 mm0: 60 - 765 U/minfeed: 0,15 - 0,2 - 0,3 - 0,36 mm/Utool taper: MK 4 total power requirement: 3,0 kWweight of the machine ca.: 0,4 tDrill with:Feed2 gearsLeft/right rotationFoot switchCoolant pumpMachine lightnew quick-release chuckThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 40 mmarm length: 1600 mmbore capacity in cast iron: 60 mmspindle diameter: 85 mmquill stroke: mmtool taper: MK 5 speeds: 24 - 1050 U/minfeeds: 0,06 - 1,0 mm/Ucolumn diameter: 345 mmvertical adjustment of the arm: 900 mmthread cutting attachment: ja Boring motor: 5,5 kwtotal power requirement: 7,5 kWweight of the machine ca.: 4000 kgdimensions of the machine ca.: 2,5 x 1,0 x 2,99 mRadial drilling machine- Mounting cube 750 x 500 x 500 mm- Digital display for boom travel- Coolant system- Good conditionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Lealde Valvecenter-5V CNC turning and drilling center Year 1997 designed specifically for valve bodies (oil & gas valves, pipeline valves, etc.). It performs turning, drilling, and machining of valve components in one setup.  Used mainly in valve manufacturing plants and heavy machining shops. Maximum swing over longitudinal guides: 1000 mm Maximum swing over cross guides: 700 mm Main spindle nose: DIN 55021 – Form B Spindle through-hole diameter: 139 mm Front spindle bearing diameter: 200 mm Maximum spindle speed: 1000 rpm Maximum spindle torque: 3434 Nm Axis Rapid Traverse • W axis: 20,000 mm/min • X / X1 / X2 axes: 17,400 mm/min • Z axis: 15,000 mm/min Travels Turning slide – transverse travel: 1250 mm Drilling slide – longitudinal travel: 1350 mm Drilling slide – transverse travel: 135 + 135 mm Motors Main spindle motor power: ...
Lealde Valvecenter-5V CNC turning and drilling center Year 1997 designed specifically for valve bodies (oil & gas valves, pipeline valves, etc.). It performs turning, drilling, and machining of valve components in one setup.  Used mainly in valve manufacturing plants and heavy machining shops. Maximum swing over longitudinal guides: 1000 mm Maximum swing over cross guides: 700 mm Main spindle nose: DIN 55021 – Form B Spindle through-hole diameter: 139 mm Front spindle bearing diameter: 200 mm Maximum spindle speed: 1000 rpm Maximum spindle torque: 3434 Nm Axis Rapid Traverse • W axis: 20,000 mm/min • X / X1 / X2 axes: 17,400 mm/min • Z axis: 15,000 mm/min Travels Turning slide – transverse travel: 1250 mm Drilling slide – longitudinal travel: 1350 mm Drilling slide – transverse travel: 135 + 135 mm Motors Main spindle motor power: ...
Key data: 3850 mm, 350 mm, 280 mm
3-axis machining centre with automatic tool change for aluminium or PVC profiles Max. travel X-axis: 3,850 mm Max. travel Y-axis: 350 mm Max. travel Z-axis: 280 mm Windows control with USB ports Speed infinitely variable up to 22,000 rpm Boc Hqjyqyaqoa R H Towi Hand-held control unit Minimum quantity spraying Tool changer with 2 magazines (a total of 10 places plus angle head) Tensioner detection and clamp displacement 2 light barrier areas and 2 material stops, thus pendulum operation possible A total of 8 material tensioners Spindle in good condition, spindle pull-in force: 12 kN Weight: approx. 2,000 kg
MAZAK Variaxis C600 – CNC Machining Center TECHNICAL FEATURES: Year: 2020 Number of hours in operation: 916 [h] Number of continuous axes: 5 X-axis travel: 650 [mm] Y-axis travel: 550 [mm] Z-axis travel: 530 [mm] X, Y and Z axis travel speed: 42000 [mm/min] Minimum distance. Spindle/table: 50 [mm] Maximum distance Spindle/table: 580 [mm] Table dimensions: Ø600 x 500 [mm] Maximum weight Tabletop Allowable: 500 [Kg] Angular travel C-axis: table revolution: 360 [°] B-axis angular travel: -30 [°] / +120 [°] Pin attachment: BT40 Maximum speed Spindle: 12000 [RPM] Spindle power: 11 [kW] Number of tool magazine stations: 60 Maximum length Tool Size: 300 [mm] Maximum weight per tool: 8 [Kg] Maximum diameter Tool Size: 80 - 130 [mm] Installed power : 46.7 [kVA] Supply voltage: 400 [V] Machine dimensions: 2350 x 2962 x 3039 [mm] Floor dimensions: 5010 x 2470 [mm] ...
Year of construction: 2001 CNC controller: Heidenhain TNC 430 Axes X-axis travel mm: 1800 Y-axis travel mm: 2000 Z-axis travel mm: 1100 C-axis degrees: 360º (0,001) B-axis degrees: -7/+187º Feed rates m/min: 60/40/40 Rapid traverse m/min: 60/40/40 Milling/turning table nc: Table dimensions mm: Ø1700x1400 Max. workpiece weight kg: 5000 Table rotation speed rpm: 200 Spindle Spindle speed rpm: 10000 Spindle drive power kW: 44/32(40%ED/cont) Spindle torque Nm: 288/187 (40/100%ED) Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 900 Tool system Tool holder: HSK-A 100 Tool magazine slots: 60 Tool changer: Double gripper Chip-to-chip time s: 13.5 Equipment Electronic Handwheel Chip conveyor Infrared probe Internal cooling lubricant supply Rotating inspection windows Rinsing gun Operating mode 4 Tool breakage probe Machine ru ...
Year of construction: 2006 CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 1600 Y-axis travel mm: 1250 Z-axis travel mm: 1000 C-axis degrees: 360º (0,001) B-axis degrees: 0-190º Feed rates m/min: 60 Rapid traverse m/min: 60 Milling/turning table nc: Table dimensions mm: Ø1500x1250 Max. workpiece weight kg: 4000 Table rotation speed rpm: 10 Spindle Spindle speed rpm: 10000 Spindle drive power kW: 44/32 (40/100%ED) Spindle torque Nm: 288/187 (40/100%ED) Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 980 Tool system Tool holder: HSK-A 100 Tool magazine slots: 60 Tool changer: Double gripper With free neighboring places mm: 250 With occupied neighboring places mm: 130 Max. Tool Length mm: 650 Max tool weight kg: 30 Chip-to-chip time s: 6 Equipment Chip conveyor Infrared probe Rotating inspection windows Ri ...
Key data: 900 mm, 850 mm, 700 mm
5 Axis Machining Center Manufacturer: Hedelius Type Acura 85 Control Heidenhain iTNC640 Year of construction 2022 Clamping area 850 x 750 Max. table load 1000kg Travel X/Y/Z 900/850/700 max speed 18,000rpm Tool holder HSK63 80 Compartment Tool Changer IKZ 70bar Chip conveyor Electronic handwheel Hydraulic zero point clamping system pssend also a magnetic plate 600 x 800mm adapted to the NP clamping system. Hydraulic Vise Schunk 2 x Schunk center clamps 60 HSK 63 Recordings Machine comes from a company liquidation and is in perfect TOP condition. All information without guarantee
CHIRON FZ 08K S Magnum HSP High-Speed CNC Machining Center TECHNICAL FEATURES: Year: 2007 NC Type: FANUC 18i-MB5 Number of axes: 7 X-axis travel: 450 [mm] Y-axis travel: 270 [mm] Z-axis travel: 310 [mm] X, Y and Z fast travel speed: 75000 [mm/min] Maximum diameter in bar turning spindle: 32 [mm] A-axis angular travel: 360 [°] A-axis indexing accuracy: 0.001 [°] B-axis angular travel: -20° / +115 [°] B-axis indexing accuracy: 0.001 [°] Pin Attachment: HSK40 Maximum speed Spindle: 30000 [rpm] Number of tool magazine stations: 40 Installed power: 17 [kVA] Supply voltage: 400 [V] Dimensions: 1500 x 2600 x 2300 [mm] Weight: 3400 [Kg] EQUIPMENT INCLUDED: x1 RENISHAW probe type TS27R x1 Spindle Cooling Unit x1 watering tray x1 unit for 6th side machining x1SCHUNK gripping system x84 HSK40 Type Tool Holder x14 Collet Type F35 x1 Electrical Cabinet Air C ...
1 gebr. DMG DMU 50 M machining centre, built in 2001 X-axis travel: approx. 500 mm Y-axis travel: approx. 400 mm Z-axis travel: approx. 400 mm Table diameter approx. 630 mm T-slots 6 pieces B-axis can be swivelled manually (-5° to +95°) C-axis manually rotatable 360° Max. workpiece weight approx. 200 kg Tool holder SK40 (DIN 69871) Speed range up to approx. 8,000 rpm Spindle power approx. 7.5 – 10 kW Torque approx. 40 – 60 Nm Control: HH 124 Weight approx. 3.8 t.
BAZ Matec 30 HV BJ 2001
BAZ lid Maho DMF 250 linear BJ 2002 BAZ Cover Maho DMC 63 H BJ 2002
The machine is in good technical condition, after prior agreement it is possible to test it. Control system: Siemens Sinumerick 840D Total hours: 12,058 h Operating hours: 5,039 h Worktable length: 1200 mm Worktable width: 5 Spindle rotation: 8000 1/min Number of axes: 3 X-axis travel: 1035 mm Y-axis travel: 560 mm Z-axis travel: 510 mm
The machine is in good technical condition, testing is possible by prior arrangement. X-axis travel distance:1,035 mm Y-axis travel:560 mm Z-axis travel:510 mm X-axis rapid traverse:30 m/min Y-axis rapid traverse:30 m/min Z-axis rapid traverse:30 m Y-axis feed length:560 mm Z-axis feed length:510 mm X-axis feed:30 m/min Y-axis feed speed:30 m/min Z-axis feed speed:30 m/min Rated (apparent) power:17 kVA Torque:83 Nm Controller manufacturer: Sie 137 mm Overall width:3,355 mm Table width:560 mm Table length:1,200 mm Table load:1,000 kg Overall weight:4,250 kg Spindle speed (min.):20 rpm Maximum spindle speed:8 000 rpm Tool operation:20 Tool length:300 mm Tool diameter:80 mm Tool weight:6,000 g Equipment:documentation / manual, chip conveyor, infinitely adjustable speed
The machine is in good technical condition, testing is possible by prior arrangement. X-axis travel distance:3,200 mm Y-axis travel:1,400 mm Z-axis travel:900 mm X-axis rapid traverse:16 m/min Y-axis rapid traverse:20 m/min Rapid traverse: m/min Y-axis feed rate:10 m/min Z-axis feed rate:10 m/min Nominal (apparent) power:50 kVA Controller manufacturer:Fanuc α 30/3000i 7.0 Workpiece length (max.):4,000 mm Workpiece width (max.): max. 000 kg Total height: 4,500 mm Total length: 8,130 mm Total width: 4,150 mm Table width: 1,200 mm Table length: 3,200 mm Table load: 8,000 kg Total weight: 17,000 kg Maximum spindle speed: 8,000 rpm Diameter: 50 mm Tool length: 350 mm Tool diameter: 127 mm Tool weight: 20 g Equipment: documentation / manual, chip conveyor, infinitely adjustable speed
Control Heidenhain iTNC 520 Travel X/Y/Z: 1200 x 900 x 500 mm Spindle speed 16,000 min-1 Tool magazine for 30 Wkz. + additional magazine for 57 Wkz. HSK-A 63 IKZ 40 bar Chip conveyor Measuring Probe Heidenhain Blum Laser System
Key data: 32 mm
dia - 32 mm
Key data: 1200 mm, 1300 mm, 900 mm
Hermle C60U Dynamic Prices on : inventar-verkauf.de/id/alesco The Hermle C60U Dynamic is a high-quality and efficient 5-axis CNC machining centre. With its robust construction and excellent performance, it is the ideal choice for demanding machining tasks. The sale does not refer exclusively to the BAZ, it is desirable to hand over CAM software as well as post-processor and customer projects! Possibly also the necessary tools. Details Year of construction 2014 Program runtime: 37,684 hours The spindle was renewed about 600 hours ago Travel X ≈ 1200 mm; Y ≈ 1300 mm ; Z ≈ 900 mm Heidenhain iTNC 530 KinematicOpt Control panel adjustable Spindle 18,000 1/min/HSK-A 63 NC swivel rotary table Ø1350x1100 Internal coolant supply 80 bar Blow-off device Blowing air through the centre of the spindle Swarf Spray Gun Emulsion mist extraction Elek. iTNC Heat Compensa ...
Universal machining center DMU DECKEL MAHO 125P hi-dyn
Control Winmax Travel X/Y/Z: 760 x 510 x 610 mm Table clamping surface: 1020 x 510 mm Spindle speed 12,000 min-1 Tool magazine for 24 Wkz., SK 40 Cooling by the spindle 20 bar
Control Winmax Travel X/Y/Z: 1270 x 660 x 610 mm Spindle speed 10,000 min-1 Tool magazine for 24 Wkz., SK 40 IKZ 20 bar Pocket milling machines with islands Synchronous threading
Stroke ( X/mm) 2000 Stroke ( Y/mm) 820 Stroke ( Z/mm) 850 Type of controll heidenhain tnc 640 Number of spindle per minute 16000 Number of inserts in the tool magazine 30 Chuck connection hsk a63 Number of axes 5 Work hours 5590
Table dimensions ( x-y/mm) 1120 x 600 Stroke ( X/mm) 1020 Stroke ( Y/mm) 600 Stroke ( Z/mm) 600 Type of controll selca s4040dh Number of spindle per minute 40 - 8000 Number of inserts in the tool magazine 24 Weight ( ton) 7 Chuck connection iso 40 Maximum loading weight ( ton) 1 Number of axes 3
Innovac GmbH
350 € 
