used Universal processing centres for sale

AXA VHC-3-M/K 5 Axis Universal Machining Center Year of construction 1998 Control SIEMENS 840C Machine number 85667 Travel: Longitudinal X-axis 1,200 mm Transverse Y-axis 700 mm Vertical Z-axis 800 mm B-axis -90° to +90° C-axis 360,000° Spindle repair 08/2025 Equipment: Swivel head -90 degrees to +90 degrees, pitch 2.5 degrees NC rotary table SEMPUCO 400 mm Speed from 40 – 6,000 rpm / 17.2 kW Tool changer 22-fold Internal cooling by the spindle Exterior cooling Paper Belt Filter Conveyor Included in delivery: Documentation / machine parameters on data carrier More photos and PDF with equipment, technical data and transport on request. Image, content and information without guarantee, therefore not binding. All other accessories visible in the photos and video are not included in the scope of delivery, so they are not part of this sale. The scope of d ...

x-travel: 800 mmy-travel: 1020 mmz-travel: 970 mmControl: TNC640 B - axis: 360 x 0,001 °feed B-axis: max. 50,00 U/minA - axis: -185 / +45 x 0,001 °feed A-axis: max. 25,00 U/minfeed x-axis: 1 - 65.000 mm/minfeed y- axis: 1 - 50.000 mm/minFeed z- axis: 1 - 80.000 mm / min.rapid traverse X/Y/Z: 60 / 50 / 80 m/minspindle turning speed - stepless: 1 - 16.000 U/minpower capacity at 100 % load: 25,00 kWpower capacity at 40 % load: 32,00 KWmax. torque at 40% / 100% load: 206,00 / 159,00 Nmspindle diameter in front bearing: 80 mmtool taper: HSK-A63 tool magazin:: 70 tool length - max.: 500 mmtool diameter: 118 mmtool diameter with 2 vacant positions: 260 mmtool total weight: 22,00 kgChip to chip time: 4,2 sec.size of pallet: Ø 770 mmworkpiece weight: 800 kginterference diameter: 900 mmtotal power requirement: 35,00 kWweight of the machine ca.: 25,00 tdimensions of the machine ca.: 7,00 x 3,50  ...

EiMa ALPHA T CONTURA 5 Axis Universal Machining Center Year of construction 10/2012 Control SIEMENS 840D sI 720 NCU Machine number 11744 Travel X – 5,029 mm / Y – 1,202 mm / Z – 772 mm B-axis travel ± 121° C-axis travel ± 211° Feed X/Y/Z = 60/60/40 m/min. New milling spindle installed on 19.05.2025 Equipment: 5-axis clevis Milling spindle 15 kW/12 Nm / 24,000 rpm for milling, drilling, sawing Disc Changer 12 Tools, HSK-63 F Pick-up space for saw blade Spindle cooling unit Fluidtech minimum quantity lubrication unit Partition wall for reciprocal machining Vacuum clamping plate make WITTE 2,100 mm x 1,200 x 42 mm Conveyor Extraction make LOSMA NEWTON N6 Included in delivery: approx. 35 pieces of tool holders / operating instructions/documentation Further photos as well as PDF with equipment, technical data and transport drawing on request. All  ...

x-travel: 500 mmy-travel: 250 mmz-travel: 400 mmCNC-control: Mitsubishi M70 Table dimensions: Ø 250 mmmax. table load: 60 kgspindle taper: HSK 63 spindle turning speed range: 20 - 12.000 U/minspindle motor: 7,5 kWfeed range: max. 10.000 mm/minrapid traverse: 48 / 60 / 72 m/mintool change unit: 24 Pos.coolant: IKZ voltage: 400 Vc-axis: 360 0b-axis: +30 / -120 °total power requirement: 25 kWweight of the machine ca.: 5,0 tdimensions of the machine ca.: 1,90 x 2,70 x 2,85 mchip conveyor: 2,00 x 0,60 x 1,65 mcoolant tank: 1,60 x 1,20 x 0,60 m- Serial No.: RM10090 012- 3+2 Axis CNC-Control (5-side machining with single clamping)– Internal coolant through spindle TSC– electronic hand wheel– Spindel oil chiller– working light– Central lubricationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

GENERAL Project No.: 905768 Quantity: 1 pcs. Manufacturer: GROB Type: G 550 Control: Siemens 840 D solutionline Year of Make: 2015 Condition: Used machine Approx. (hrs): 35421 Spindle Approx (hrs): 22094 DESCRIPTION MILL 5Axles Travel in X 800 mm Travel in Y 1020 mm Travel in Z 970 mm Max. rapid traverse speed in X/Y/Z 65/50/80 m/min Max. acceleration in X/Y/Z 6.0/4.5/6.5 m/s2 Feed force in X/Y/Z 8000/8000/12000 N Direct displacement measurement system Tool holder HSK-A 100 Max. speed milling spindle 10000 1/min Max. power at ED 10-40/100% 65/54 kW Max. torque at ED 10-40/100% 340 Nm Spindle diameter in the front bearing 110 mm Chain tool magazine 2x30 stations Max. tool diameter 118 mm Max. tool diameter for free neighboring spaces 260 mm Max. tool length 500 mm Max. tool weight 22 kg Chip to chip time 4.7 s Rotary pallet changer 2-fold Pallet s ...

x-travel: 2000 mmy-travel: 2000 mmz-travel: 2000 mmControl: SIN840D B - axis: 360 x 0,001 °A - axis: -90 - +90 x 0,001 °feed X/Y/Z/-axis: 1 - 30000 mm/minrapid traverse X/Y/Z: 30,00 m/minfeed B-axis: 0,1 - 3600 ° / minfeed A-axis: 0,1 - 3600 ° / minspindle turning speed - gearbox stage 1: 1 - 1096 1/minspindle turning speed - gearbox stage 2: 1096 - 6000 1/minpower capacity: 45,00 kWtool taper: HSK-A 100 max. torque on the spindle: max.1250 Nmtool magazin:: 207 + 10 tool length - max.: 700 mmtool diameter: 300 mmpallet size: 2x 1000x1000 mmworkpiece weight: 5000 kgT-slots: DIN650 T-slot - distance: 100 mmT-slot - width: 22 mmnumber of T-slots: 1 + 8 total power requirement: 100,00 kWweight of the machine ca.: tdimensions of the machine ca.: 13,00 x 8,00 x H4,50 m5-axis simultaneous machining center with control SIEMENS SIN840D, measuring probe, chip conveyor, coolant system, coolant ...

GENERAL Project No.: 905782 Quantity: 1 pcs. Manufacturer: SHW Type: UF 5 S Control: Heidenhain TNC 430 Year of Make: 1998 Condition: Used machine Engine One Approx (Hrs): 19295 Program run approx. (hours): 9323 Approx. (hrs): 22237 DESCRIPTION MILL 4Axles Travel in X 2500 mm Travel in Y 1260 mm Travel in Z 1270 mm Tool holder SK 50 Max. speed milling spindle 4000 1/min Max. power at ED 10-40/100% 32/26 kW Milling head holder automatically swivels 360x1 degrees Automatic swivelling milling head 180x1 degrees Chain tool magazine 48 stations Max. tool diameter 125 mm Max. tool diameter with free neighboring spaces 250 mm Max. tool length 400 mm Max. tool weight 22 kg Tool change time 10 s Pneumatic tool taper cleaning in tool magazine Rotary table NC-controlled OTHER EQUIPMENT Splash protection cladding with partially clad work area Lighting  ...

x-travel: 550 mmy-travel: 400 mmz-travel: 360 mmControl: Siemens 840D solution lin total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 8620 Type: DBZ Producer: AXA Created: 2012 Parameters: Control system: HEIDENHAIN iTNC 530 Hours: 28279 h Number of stacking positions: 22 pieces Number of axles: 5 pieces Maximum spindle speed: 10000 1/min X-axis travel: 750 mm Y-axis travel: 500 mm Z-axis travel: 600 mm Equipment: Rotary work table

x-travel: 800 mmy-travel: 700 mmz-travel: 550 mmControl: Heidenhain TNC 530 total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The machine is in good technical condition, a test run is possible by prior arrangement. HSK 63 – The current condition of the machine corresponds to its age, there are currently no problems with the machine. On 5.1.2022, the X-axle screw was replaced, and on 25.4.2024, the hydraulics were replaced. Spindle hours: 41,273, machine hours: 89,892. Number of axles: 5. A video of the machine is available on request.

CONTROLS  CNC controls. HEIDENHAIN WORKING RANGE -CUBIC-  number of processing axes (excl parallel axes): 3   X-axis travel: 500 mm  Y-axis travel: 400 mm  Z-axis travel: 400 mmTABLE  table surface (left-right): 700 mm  table surface (front-back): 500 mmSPINDLE / HEAD  spindle revolutions (max): 10000 /min  tool fixture: ISO SK 40 TOOL MAGAZINE  number of positions: 16 DIMENSIONS / WEIGHTS  space requirements -left/right-: 5000 mm  space requirements -front/back-: 3700 mm  total height: 2500 mm  total weight approx.: 4500 kg4726 spindle hours, 10,000 operating hours

The machine is in good technical condition, an inspection and a test run are possible by prior arrangement. Workpiece probe Renishaw RMP60. Centerline probing, simultaneous machining, chip conveyor. 20 tools. Extensive optional equipment. Table diameter 200 mm. X and Y axes overhauled.

x-travel: 2360 mmy-travel: 600 mmz-travel: 800 mmControl: Heidenhain ITNC 530 total power requirement: 45 kWweight of the machine ca.: 15 tdimensions of the machine ca.: 3,7 x 3,5 x 3,3 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The machine is in good technical condition, a test run is possible by prior arrangement. Control: Heidenhain TNC 530 18,000 rpm, SK 40, 32 tool positions, 4 axes. A fifth rotary axis mounted on the table has been retrofitted.

CONTROLS  CNC controls HEIDENHAIN MILL PLUS WORKING RANGE -CUBIC-  number of processing axes (excl parallel axes): 5   X-axis travel: 500 mm  Y-axis travel: 420 mm  Z-axis travel: 380 mmSPINDLE / HEAD  spindle revolutions (max): 18000 /min  tool fixture: HSK A63 AXIS DRIVES  feed velocity (max): 20000 mm/min  rapid traverse: 50000 mm/minTOOL MAGAZINE  number of positions: 60 ELECTRICAL SPECIFICATIONS  mains voltage: 400 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS  space requirements -left/right-: 2500 mm  space requirements -front/back-: 2600 mm  total height: 2440 mm  total weight approx.: 6000 kgATTACHMENTS  zero-point workholding system: yes   chip conveyor: yes   coolant unit: yes    ...

Inv. Num. : 8513 Type: UMC 750 Producer: HAAS Created: 2019 Parameters: Table diameter: 500 mm Maximum table load (even): 300 kg Spindle drive power: 22.4 kW Maximum spindle speed: 8100 1/min X-axis travel: 762 mm Y-axis travel: 508 mm Travel Z-axis: 508 mm Axis C: 360 st B-axis: 120-35 Machine weight: 6464 kg

CONTROLS  CNC controls HEIDENHAIN ITNC 530 WORKING RANGE -CUBIC-  number of processing axes (excl parallel axes): 5   X-axis travel: 1800 mm  Y-axis travel: 2000 mm  Z-axis travel: 1100 mmTABLE  table surface (left-right): 1700 mm  table surface (front-back): 1400 mm  workpiece load (max): 5000 kgSPINDLE / HEAD  spindle revolutions (max): 10000 /min  tool fixture: HSK E100   drive power S6 40%: 44 kW  drive power S1 100%: 32 kWTOOL MAGAZINE  number of positions: 100 ELECTRICAL SPECIFICATIONS  mains voltage: 400 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS  space requirements -left/right-: 8400 mm  space requirements -front/back-: 9000 mm  total height: 4200 mm  total weight approx.: 35000 kgATTACHM ...

Inv. Num. : 8503 Type: Topper TMV-510T Producer: Tongtai Created: 2008 Parameters: Control system: Fanuc 0i-MF Plus Operating hours: 2532 h Work table length: 600 mm Work table width: 360 mm X-axis travel: 510 mm Y-axis travel: 360 mm Travel Z axis: 300 mm Speed: 8000 1/min Spindle power: 5.5 kW Cone: BT-30 Number of all tools: 20 pieces Number of axles: 5 pieces Rapid traverse X/Y/Z: 48 m/min Machine height: 2310 mm Machine length: 2700 mm Machine width: 1600 mm Machine weight: 2000 kg Equipment: Renishaw tool probe Grips CNC-controlled 5th axis TSUDAKOMA TN-101

x-travel: 1.600 mmy-travel: 1.250 mmz-travel: 1.000 mmsize of pallet: 1.000 x 1.250 mmcontrol: SIN840D power capacity at 40 % load: 38,00 KWspindle turning speed - stepless: 20 - 10.000 U/minpower capacity at 100 % load: 25,00 kWmax. torque at 40% / 100% load: 288 / 187 Nmtool taper: SK50 feed X/Y/Z/-axis: 20 - 15.000 mm/minrapid traverse X/Y/Z: 60,00 m/minB - axis: -150° / +80° x 0,001 °feed B-axis: 3600 ° / minC-axis: 360 x 0,001 °Rapid motion C- axis: 1 - 3.600 U / min.table load: 3000 Kgtool magacine with: 240 tool diameter: 110 mmwotkpiece diameter with 2 vacant positions: 250 mmtool length - max.: 650 mmweight of tools max.: 15,00 kgtotal power requirement: 75,00 kWweight of the machine ca.: 55,00 tdimensions of the machine ca.: 12,50 x 8,00 x 4,20 m5-axis machining center with SIEMENS Sinumerik 840D control electronical handwheeloperating mode 4240-position tool magazine 4-po ...

Key data: 800 mm, 600 mm, 500 mm

Heidenhain TNC 430, 12,000 rpm SK40, touch probe, extractor, chip conveyor, electronic handwheel. XYZ= 800x600x500 mm. Clamping devices not included.

CONTROLS  CNC controls SIEMENS 840 D WORKING RANGE -CUBIC-  number of processing axes (excl parallel axes): 5   X-axis travel: 500 mm  Y-axis travel: 450 mm  Z-axis travel: 400 mm  rotating range B-axis from: 110 °  rotating range B-axis up to: -5 °  rotating range C-axis from: 0 °  rotating range C-axis up to: 360 °TABLE  table surface (left-right): 630 mm  table surface (front-back): 500 mm  clamping surface diameter: 630 mm  workpiece load (max): 200 kgSPINDLE / HEAD  spindle revolutions (max): 10000 /min  tool fixture: ISO SK 40   drive power: 9 kWTOOL MAGAZINE  number of positions: 16   tool diameter max.: 80 mm  tool weight max.: 6 kgELECTRICAL SPECIFICATIONS  mai ...

Inv. Num. : 8444 Type: UMC 500 Producer: HAAS Created: 2021 Parameters: Control system: HAAS Switch-on hours: 3043 h Table diameter: 400 mm Maximum table load (even): 226 kg Spindle drive power: 22.4 kW X-axis travel: 610 mm Y-axis travel: 406 mm Travel Z-axis: 406 mm Speed: 10000 1/min Maximum feed speed axis X: 16.5 m/min Maximum feed speed axis Y: 16.5 m/min Maximum feed speed axis Z: 16.5 m/min Cone: ISO 40 Number of all tools: 30 pieces Rapid traverse X/Y/Z: 22.9 m/min Machine weight: 5400 kg Equipment: Conveyor Renishaw workpiece probe Tool Holder Tools Renishaw tool probe Wi-Fi camera in the machine working room

x-travel: 450 mmy-travel: 600 mmz-travel: 330 mmControl: Heidenhain TNC 640 spindle: HSK A 63 turning speeds: 18000 U/minswivable table:: STP 320mm Tools changer: 55 fach/toolsInternal cooling system: 80 barChip coveyor: JA Spindle hours: 7521 hMachine on: 10.532 hweight of the machine ca.: 8,7 tdimensions of the machine ca.: m5-axis CNC machining center-Equipment & accessories-Dynamic Efficiency (ACC, AFC, vortex milling),-Dynamic Precision (CTC,AVD,LAC),-Additional magazine ZM216, torque drive in the C axis,-Spur gear tandem drive -in the A-axis, car. Cabin roof including side panel, interior-Scratch belt conveyor, chip washing gun, electric. heat compensation,-Tool breakage monitoring, robot cell RS05-2The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 8434 Type: BX900T Producer: Pinnacle Created: 2019 Parameters: Control system: Heidenhain TNC 640 Switch-on hours: 13002 h Hours: 9507 h Work table length: 1700 mm Work table width: 850 mm Maximum table load (uniform): 1200 kg Speed: 15000 1/min X-axis travel: 1500 mm Y-axis travel: 900 mm Travel distances Z-axis: 1100 mm Max. machining diameter: 800 mm Number of Stacking Positions: 60 pieces Machine weight: 17000 kg Equipment: Vises (2 pieces) Heidenhain Tool Probe Workpiece probes Heidenhain VERO clamping (Schunk brand) Clamps (approx. 79 pcs.)

CONTROLS  CNC controls. 3D MILLPLUS IT V600 WORKING RANGE -CUBIC-  number of processing axes (excl parallel axes): 3   X-axis travel: 500 mm  Y-axis travel: 450 mm  Z-axis travel: 400 mmTABLE  table surface (left-right): 700 mm  table surface (front-back): 500 mm  workpiece load (max): 500 kgSPINDLE / HEAD  spindle revolutions (min): 20 /min  spindle revolutions (max): 10000 /min  tool fixture: ISO SK 40   drive power: 13 kWAXIS DRIVES  traverse velocity X (max): 24000 mm/min  traverse velocity Y (max): 24000 mm/min  traverse velocity Z (max): 24000 mm/minTOOL MAGAZINE  number of positions: 30   tool diameter max.: 80 mm  - with free neighbour positions: 130 mm  tool length max.: 300 mm  t ...

Control Heidenhain 426 Travel X/Y/Z: 500 x 380 x 380 mm Clamping area 500 x 400 mm Tool magazine for 24 Wkz., SK 40 Speed 15,000 min-1 NC rotary and swivel table

x-travel: 500 mmy-travel: 450 mmz-travel: 400 mmcontrol: SIN840D SL B - axis: -5 / +110 x 0,001 °C-axis: 360 x 0,001 °feed X/Y/Z/-axis: 1 - 24.000 mm/minrapid traverse X/Y/Z: 24,00 m/minspindle turning speed - stepless: 20 - 10.000 U/minpower capacity at 40 % load: 13,00 KWpower capacity at 100 % load: 9,00 kWtool taper: SK40 toolpiece magazine: chain magazine: 30 Stückdiameter of tools max.: 80 mmtool diameter with 2 vacant positions: 130 mmtool length - max.: 300 mmweight of tools max.: 6,00 kgtable surface area: 630 x 500 mmworkpiece weight: 200 kgtotal power requirement: 17,00 kWweight of the machine ca.: 6,00 tdimensions of the machine ca.: 4,50 x 4,00 x H2,90 m5-axis machining center with SIEMENS Sinumerik 840D SL control, swivel rotary table, tool magazine 30-positions, HEIDENHAIN touch probe,linear scales X/Y/Z, chip conveyor, electronical handwheel, 2nd work-area-door.The dat ...

Inv. Num. : 8298 Type: UMC 750 Producer: HAAS Created: 2020 Parameters: Control system: HAAS Switch-on hours: 7037 h Hours: 5222 h Table diameter: 500 mm Maximum table load (even): 300 kg Spindle drive power: 22.4 kW Number of axles: 5 pieces Maximum spindle speed: 8100 1/min X-axis travel: 762 mm Y-axis travel: 508 mm Travel Z-axis: 508 mm Max. tool diameter: 127 mm Max. tool length: 305 mm Max. tool weight: 5.4 kg Number of Stack Positions: 30 1 Axis C: 360 st

x-travel: 1.350 mmy-travel: 1.150 mmz-travel: 895 mmtable diameter: 4.590 x 6.990 x 3.150 mmmmhandwheel: el. tool adaptor: HSK-A63 turning speeds: 24.000 U/minengine output: 38 kWtable weight: 1.600 Kg: 92 facha-axis: A +16/-120 Control: HEIDENHAIN iTNC 530 c-axis: 360 °total power requirement: kWweight of the machine ca.: 14.000 kgdimensions of the machine ca.: 4.590 x 6.990 x 3.150 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 8243 Type: DMU 60 P Producer: DMG Generated: Parameters: Work table length: 1000 mm Work table width: 600 mm Number of axles: 5 pieces X-axis travel: 600 mm Y-axis travel: 525 mm Travel Z axis: 500 mm Speed: 12000 1/min Machine weight: 4000 kg

x-travel: 3.000 mmy-travel: 1.000 mmz-travel: 860 mmControl: Heidenhain iTNC-530 table-size: 3.600 x 1.050 mmT-slots: 7 x 18 T - slots distance: 125 mmdistance table - lower edge spindle: 25-366 mmtable weight: 4.200 Kgb-axis: +-105 °c-axis: +-360 0rapid travel x/y/z: 30.000 mm/minrotary table: Durchm. 1.000 mmmax. turning diameter: 1.400 mmnumber of spindle speeds: 9.000 U/min/rpmtool taper: ISO-50 DIN 69871-AD spindle drive: 28,5 kWmax. torque on the spindle: 240 Nmtool change unit: AITEK, 40 fach: 20 handwheel: Ink. Shuttle operation: Inkl Chip coveyor: Ink. Internal cooling system: 20 bartotal power requirement: 65 kWweight of the machine ca.: 24,8 tdimensions of the machine ca.: 8.056 x 5.496 x 3.790 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 8227 Type: U-620 Producer: Spinner Created: 2011 Parameters: Control system: Siemens Number of axles: 5 pieces X-axis travel: 620 mm Y-axis travel: 520 mm Travel travel Z-axis: 460 mm Maximum vertical spindle speed: 10000 1/min

Control: SIEMENS 840D SL Shopmill x-travel: 2600 mmy-travel: 700 mmz-travel: 700 mmmilling head -swivable +/-: 100 °-C-axis table rotating: 360 °tool magazin:: 120 spindle taper: HSK63 spindle turning speed - stepless: 20-18000 U/minrapid travel x/y/z: 40 m/minOverall size: 7000 x 3450 x 2625 mmweight of the machine ca.: 15.5 tCoolant through spindle: pressure: 40 Bar3D measuring tracer: Chip conveyor: Coolant installation: SIEMENS 840Dwww.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 8225 Type: U5-1520 Producer: Spinner Created: 2012 Parameters: Control system: Siemens Work table length: 820 mm Work table width: 540 mm Number of axles: 5 pieces Speed: 12000 1/min X-axis travel: 1520 mm Y-axis travel: 520 mm Travel travel Z-axis: 460 mm Table diameter: 560 mm

x-travel: 500 mmy-travel: 450 mmz-travel: 400 mmB-axis (table): -5/+110 Gradc-axis: 360 Gradcontrol: SIEMENS 840D SL für 5 Achsentool piece magazine with: 60 Plätzennumber of spindle speeds: 15000 U/mindimensions of the machine ca.: 2.5 x 2.4 x 2.5 mweight of the machine ca.: 5 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control Heidenhain Mill-Plus Travel X/Y/Z: 500 x 380 x 380 mm Clamping area 500 x 400 mm Tool magazine for 24 Wkz., SK 40 Speed 8,000 rpm NC rotary and swivel table Conveyor

x-travel: 1.000 mmy-travel: 1.000 mmz-travel: 1.000 mmControl: SINUMERIK 840D pl spindle turning speed - stepless: U/mintotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m5-axis machining center with SIEMENS SINUMERIK 840D pl control, electron. handwheel, NC swivel rotary table Ø1,000mm, coolant through the spindle, chip conveyor, 180-fold tool-magazine HSK100,The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 5211 Type: DMU 80 P Producer: Deckel Maho Generated: 2000 Parameters: Control system: Heidenhein TNC 430 Switch-on hours: 87285 h Hours: 34100 h Minimum vertical spindle speed: 20 1/min Maximum vertical spindle speed: 12000 1/min X-axis travel: 800 mm Y-axis travel: 650 mm Z-axis travel: 550 mm Cone: ISO 40 Number of all tools: 30 pieces Equipment: IKZ Workpiece Probe Conveyor Spindle cooling 2020: Replacement of the PILS contactors New E/R module New X/Y Module 2019: Lock Replacement Workpiece Probe Sensor Replacement Replacing the hydraulic hose of the tool clamp 2018: New X/Y axle bolt Replacement of the Y-axis blind Replacement of the B-axis planetary gearbox New motor and B-axis measuring cable 2016: New spindle bearings System Replacement Replacing the UV105 power supply Replacement of the spindle mod ...

x-travel: 500 mmy-travel: 450 mmz-travel: 400 mmcontrol: Heidenhain iTNC 530 c-axis: 360 b-axis: -5/+110 °turning speeds: 20- 10000 U/minpower capacity - milling spindle: 13 kWmax. torque on the spindle: Nmtool taper: SK 40 no. of workpieces in the magazine: 16 Stückrapid traverse: 24 m/minFeed speed: m/min.table surface area: 630 x 500 mmtable load: 200 kgweight of the machine ca.: 4,0 tdimensions: 2,3x 3,2 x 2,75 m3 + 2 axis Milling Center- Turn-/swiveling table full programmable- cableless 3D touch probe Heidenhain TS 641- electr. hand wheelThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control: Heidenhain iTNC 530 Travel: X-axis: 600 mm Y-axis: 620 mm Z-axis: 520 mm Clamping surface - rotary and swivel table: Ø600 x 480mm Swivel: +10° / -90° Mount: SK 40 Tool magazine: 30 compartment t Motor spindle white: 50 - 12,000 rpm Accessories -Conveyor - Screen filter system 500 L - IKZ

x-travel: 550 mmy-travel: 400 mmz-travel: 360 mmc-axis: +100 B-axis (table): 360° Control: Siemens 840 D total power requirement: 32 KVA kWweight of the machine ca.: 9,5 tdimensions of the machine ca.: 5,2 x 4,8 x 3,04 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 600 , 450 , 450

Machine-Details Stock-No. 1105-04008 Type of machine Machining Center - Universal Make MIKRON AGIE CHARMILLES Type HPM 450 U - 5 Axis Year of manufacture 2012 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Switzerland Delivery time to be agreed Freight basis ex site Technical details X-Travel 600 mm Y-Travel 450 mm Z-Travel 450 mm control iTNC 530 Heidenhain Turning Speed Range - Main Spindle 20000 min/-1 power capacity - main spindel 30 kW max. Torque 91 Nm tool taper HSK A63 numbers of pallets 7 Size of pallet 350 x 350 mm max. pallet load 150 kg Swivellable B: -120 / +45° Rotatable C: 360° number of toolpositions 30 pos. Max. mould width 80 / (125) mm max. tool length 200 mm Change time ca. 3.0 sec max. tool weight 6 kg max. total weight 80 kg Rapid traverse 15 m/min Feed speeds max. 22,000 mm/min rapid traverse B: 50 min/-1 ...

x-travel: 800 mmy-travel: 700 mmz-travel: 600 mmcontrol: SIN 840D Powerline spindle turning speed - stepless: 1 - 8.000 U/minpower capacity at 40 % load: 28,00 kWpower capacity at 100 % load: kWmax. torque on the spindle: Nmspindle diameter in front bearing: 80,00 mmspindle taper: HSK-A100 B-axis: 187 °feed X/Y/Z-axis: 15.000 mm/minrapid traverse X/Y/Z: 50,00 m/minfeed force X/Y/Z axis: 10.000 Nrapid traverse B-axis: 11,20 U/minsize of pallet: 800 x 630 mmtable load: 0,80 tc-axis: 360,000 x 0,001 °table turning speeds: 1 - 500 U/mintoolpiece magazine: chain magazine: 120 Stücktool diameter: 100 mmtool diameter with 2 vacant positions: 160 mmtool length - max.: 350 mmweight of tools max.: 10,00 kgtotal power requirement: 60,00 kWweight of the machine ca.: 13,00 tdimensions of the machine ca.: 7,40 x 5,30 x H3,50 mWith Siemens SIN840D control, tool taper cleaning, tool breakage monito ...

Key data: 670 mm, 830 mm, 600 mm

Control: HEIDENHAIN ITNC 530 Travel: X-axis: 670 mm Y-axis: 830 mm Z-axis: 600 mm A +120° to -120°, C 360° Workspace Turntable diameter 800 mm, 9 T-slots, Table load 1200 kg, Tool changer Tool holder: HSK-A 63 96-fold tool changer Tool length max.: 300 mm Tool diameter max.: 75 mm Tool diameter with adjacent empty station max.: 125 mm Tool weight max.: 7 kg Tool change time: 3 s Rapid traverse and feed Express feed X Y Z 60 m/min, + max. speed A-axis 50 rpm C-axis 100 rpm Acceleration X Y Z max. 7 ms², General data Repeatability/positioning accuracy for new delivery 0.004 mm/0.008 mm (VDI/DGQ 3441) incl. tool holders with tools on the tool changer, Oil mist extraction IKZ Conveyor Nominal power 90 kVA Full load current 125 A max. current load 200 A 400 V 50 Hz

x-travel: 800 mmy-travel: 700 mmz-travel: 600 mmturning speeds: 12000 1 U/min: control: Heidenhain total power requirement: 59 kWweight of the machine ca.: 10,6 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 7446 Type: DYNAMIC FC 3000 CNC Producer: SAHOS Created: 2011 Parameters: Control system: HEIDENHAIN Spindle drive power: 18 kW X-axis travel: 3000 mm Y-axis travel: 1500 mm Z-axis travel: 1070 mm

x-travel: 1.850 mmy-travel: 1.400 mmz-travel: 720/905 mmControl: SIEMENS SL 840 D spindle turning speed range: 15.000 U/minB - axis: -20 / +120 °Tool bore: HSK-A63 0tool magacine with: 45 Plätzentool length - max.: 365 mmworkpiece diameter at used places besides: 90 mmtool diameter with 2 vacant positions: 130 mmNC rotary table: 1.600 mmT-slots: 12 groove width: 18H12 flute distance: 100 mmtable load capacity: 3.000 KGTable speed max.: 30 1/mintotal power requirement: 89 kWweight of the machine ca.: 26 tdimensions of the machine ca.: 7,00 x 6,20 x 4,15 m5-Axis machining center with Siemens SINUMERIK 840D control, BLUM Laser, Renishaw, RotoClear, Fire extinguishing system, 2x electronic handwheel, Steptec spindle, Spindle oil cooler, coolant through the spindle, High pressure pump, Bürener belt filter system, Chip conveyor.Machine can be inspected under powerThe data for this ad was cr ...

Inv. Num. : 6929 Type: S82TT Producer: BUMOTEC Created: 2002 Parameters: Control System: Fanuc OIMB CNC X-axis travel: 250 mm Y-axis travel: 120 mm Z-axis travel: 170 mm Minimum vertical spindle speed: 20000 1/min Cone: ISO 10 Machine height: 1738 mm Machine length: 2220 mm Machine width: 1236 mm Machine weight: 850 kg

Control: HEIDENHAIN iTNC-530 for axes: 5 x-travel: 712 mmy-travel: 508 mmz-travel: 515 mm-A-axis table swivelling: +30/-120 °-C-axis table rotating: 360 °rotary table dia.: 330 mmno. of tools in magazin: 60 max. tool diameter: 88 mmmax. tool-dia with free toolbox: 125 mmmax. tool length: 280 mmmax. tool weight: 7 kgspindle taper: SK40 Big Plus spindle turning speed range: -15000 U/minpower capacity - milling spindle: 25 kWweight of the machine ca.: 12.8 tdimensions of the machine ca.: 303x395x367 cm3D measuring tracer: RENISHAW Zero point clamping system:: LANG TECHNIK Coolant through spindle: pressure: 20 barThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.