Manufacturer:
(Category: 101)
magnetic drilling machine Brand: Stahlgruppe Type: SG450M Max. drilling diameter: 35 mm drilling diameter Power: 1600 watts Connection: 230 volts Magnet Strength: 16000 Newton Speed: 810 rpm Drilling depth: 145 mm drilling depth Includes: Oil reservoir for cooling and lubrication Security: Strap for fall protection Condition: unused, in the original packaging
equipped with steel base, T-slot clamping table
:RB 100 | RB 120 bore capacity in steel (diameter):100 | 125 mmarm length:3150 | 4000 mmdistance spindle center to floor plate:2500 | 2500 mmdistance spindle center to table:min. 750 mmspindle stroke:500 | 560 mmDistance between spindle and column, max.:3150 | 4000 mmDistance between spindle and column, min.:570 | 600 mmspindle taper MT:6 MK | Metrisch 80 spindle turning speed range:8-1000 | 6-800 U/mintransmission ratio:22 feed range:0.06-3.2 mm/mindice table:800x1250 mmpower capacity:15 | 18,5 kWWeight approx.:20000 | 28500 kgMachine size (LxWxH):4780x1630x4720 | 5817x2150x5120 mmpayment: 100 % before loadingwarranty:12 months
x-travel:1270 mmy-travel:660 mmz-travel:610 mmtable surface area:1500 x 660 mmtable load:1,3 tcontrol:ULTIMAX 4 turning speeds:10000 1/minspindle:15 kWTool bore:SK 40 rapid traverse:X/Y/Z 30/30/20 m/mintool change unit:24 Pos.total power requirement:30 kVAweight of the machine ca.:9,5 tdimensions of the machine ca.:4,8 x 4,56 x 2,95 mvertical machining center, el. handwheel,chipconveyor,
x-travel:610 mmy-travel:580 mmz-travel:580 mmdistance spindle nose and table:70-650 mmdistance spindle center to table:80-660 mmtable height over floor:1150 mmpallet table size:400x400 mmmax. workpiece weight:400x2 kgtable - indexing:1° (optional 0,001°) spindle speeds:12000 1/minspindle drive:22/25 kWspindle speed steps:2 spindle nose:40 SK/BTspindle bearing diameter:75 mmrapid speed:60 m/minfeeds:1-20000 mm/Utool taper:40 SK/BTTool changer:60 fachtool diameter:75 mmweight of tools max.:12 kgworkpiece length:410 mmnumber of pallets:2 compressed air volume:400 l/mincoolant tank:550 lhydraulic tank:30 llubrication tank:2 ltotal power requirement:45 kvaweight of the machine ca.:9500 kgCNC controller:Siemens/Fanuc/Heidenhain automatic tool changer:60 fachcnc rotary table:1 °inner coolant:20 barServo motors:vom Steuerungshersteller ATC:80/120 CTS:35 oder 70 bar CNC controls from:Siemens/F ...
50/60Hz; core drill dia 35mm; twist drill dia 13mm; stroke 210mm; cable length 2.5M; 7750
x-travel:710 mmy-travel:680 mmz-travel:680 mmdistance spindle nose and table:70-750 mmdistance spindle center to table:80-760 mmtable height over floor:1150 mmpallet table size:500x500 mmmax. workpiece weight:500x2 kgtable - indexing:1° (optional 0,001°) spindle speeds:12000 1/minspindle drive:22/25 kWspindle speed steps:2 spindle nose:40 SK/BTspindle bearing diameter:75 mmrapid speed:60 m/minfeeds:1-20000 mm/Utool taper:40 SK/BTTool changer:60 fachtool diameter:75 mmweight of tools max.:12 kgworkpiece length:410 mmnumber of pallets:2 compressed air volume:400 l/mincoolant tank:550 lhydraulic tank:30 llubrication tank:2 ltotal power requirement:45 kvaweight of the machine ca.:12200 kgautomatic tool changer:60 fachcnc rotary table:1 °inner coolant:20 barCNC controller:Siemens/Fanuc/Heidenhain Servo motors:vom Steuerungshersteller ATC:80/120 CTS:35 oder 70 bar CNC controls from:Siemens/ ...
x-travel:1050 mmy-travel:850 mmz-travel:970 mmdistance spindle nose and table:100-950 mmdistance spindle center to table:100-1070 mmtable height over floor:1300 mmpallet table size:630x630 mmmax. workpiece weight:1200x2 kgtable - indexing:1° (optional 0,001°) max. workpiece height:1100x1100 mmspindle speeds:10000 1/minspindle drive:30/25 kWspindle speed steps:2 spindle nose:50 SK/BTrapid speed:50 m/minfeeds:1-20000 mm/Utool taper:50 SK/BTTool changer:60 fachtool diameter:125 mmweight of tools max.:25 kgworkpiece length:610 mmnumber of pallets:2 weight of the machine ca.:21600 kgautomatic tool changer:60 fachcnc rotary table:1 °inner coolant:15 barCNC controller:Siemens/Fanuc/Heidenhain Servo motors:vom Steuerungshersteller ATC:80/120 CTS:35 oder 70 bar CNC controls from:Siemens/Fanuc/Heidenhain tool measuring system:von RENISHAW workpiece measurement system:von RENISHAW chip conveyor ...
x-travel:450 mmy-travel:450 mmz-travel:450 mmweight of the machine ca.:14 tsize of pallet:320 x 320 mmnumber of spindles:2 Double spindle 4-axis machining center Horizontal4 machine platesRenishaw probeControl Siemens Sinumerik 840DWorking space (X / Y / Z): 450x450x450 mmLoad pallet / table max .: 300 kgAcceleration: 10 m / s²Rapid traverse: 60 m / minPallet size: 320 x 320 mmChip-to-chip time: 2.6 sWorkpiece height max .: 700 mmTool holder: HSK 63Tool places: 2x 60Tool spindle: 10,000 rpm, 95 NmSpeed increase to 18,000 rpmInfrared receiver for probe,Make Renishaw Vaf72a0pTool magazine with 60 placesControl panel on the workstationControl panel on the tool installation siteWorkpiece positioning stations can be rotated manuallywith hydraulic workpiece clamping 60 barPneumatic support control on the workstationAutomatic swing gateExtended coolant layer 70 bar / 1500I /VF 250 Coolant Cool ...
x-travel:1.500 mmy-travel:700 mmz-travel:610 mmcontrol:HEIDENHAIN iTNC 530 table-size:1.400 x 700 mmtool taper:SK 40 numbers of positions in the tool changer:48 fachspindle turning speed - stepless:15000 1/minrapid traverse:36 m/mintable load capacity:700 kgspindle drive:25 kWtotal power requirement:30 kVAweight of the machine ca.:9,1 tdimensions of the machine ca.:3,7 x 2,65 x 2,9 mvertical machining center,20 bar internal coolant supply with paper filter,3D-touchprobe,chipconveyor,el. handwheelmeter readings:approx. 43.600 h "machine on", approx. 20.000 h "spindle on",
x-travel:1200 mmy-travel:1000 mmz-travel:1000 mmdistance spindle nose and table:100-1100 mmdistance spindle center to table:200-1200 mmtable height over floor:1350 mmpallet table size:800x800 mmmax. workpiece weight:1800x2 kgtable - indexing:1° (optional 0,001°) max. workpiece height:1300x1250 mmspindle speeds:10000 1/minspindle drive:30/25 kWspindle speed steps:2 spindle nose:50 SK/BTrapid speed:50 m/minfeeds:1-20000 mm/Utool taper:50 SK/BTTool changer:60 fachtool diameter:125 mmweight of tools max.:25 kgworkpiece length:610 mmnumber of pallets:2 weight of the machine ca.:26000 kgautomatic tool changer:60 fachcnc rotary table:1 °inner coolant:15 barServo motors:vom Steuerungshersteller CNC controller:Siemens/Fanuc/Heidenhain ATC:80/120 CTS:35 oder 70 bar CNC controls from:Siemens/Fanuc/Heidenhain tool measuring system:von RENISHAW workpiece measurement system:von RENISHAW chip convey ...
x-travel:1250 mmy-travel:880 mmz-travel:800 mmcontrol: Heidenhain TNC 430 tool change unit:60 Pos.Tool bore:SK 50 turning speeds:8000 1/minsize of pallet:1000 x 800 mmtotal power requirement:56 kVAweight of the machine ca.:14,3 tdimensions of the machine ca.:5,5 x 3 x 3,1 m5-axis machine with controlled universal milling head (B-axis),2-palett changer incl. 2 palets, 1000 x 800 mmProduction package:- internal coolant supply 40 bar with 900l coolant box (2,25 x 1.3 x 2,2m / 950kg),- chipconveyor (4,85 x 1,2 x 1,75m / 600kg),- ROTOCLEAR,- 3D touchprobe RENISHAW MP 10- 60 pos. ATC SK 50- el. handwheel - mech. tool-breakage control,accessories (SK 50 toolholdersapprox. 100.200 h "machine on", approx. 52.200 h "spindle on", last spindle change in 2020
: neu : ca. 8 Wochen ab Auftragse : Spanien : 48960 €: 935.14 €: 35 mm: MK 4 : 390 mm: 94- 2.225 (16) 50 Hz 113 U/min: M35 : 1660 mm: 1510 mm: 2600 mm: 910 kg: 180 mm: 190 - 650 mm: 1310 mm: 125 mm: 400 x 420 mm: 0,10 - 0,18 - 0,24 (3) mm/min: 750 - 1.500 U/minERLO (MADE IN SPAIN)FOR DEMANDING WORKSHOP USEdrilling and milling machineautomatic feedprecision electromagnetic clutchesgeared drivecross tablefixed base and displaceable headstockcontrol panelcooling equipment with electric motor pumphand wheel for fine tuningclamping device for toolsadjustable stopdrill guardOPTIONAL EQUIPMENT:Digital read out for drilling depthTapping deviceMotorized longitudinal and/or transverse feedDigital read out for table axes and/or drill head height adjustmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel:700 mmy-travel:700 mmz-travel:700 mmturning speeds:18.000 1/minmax. torque on the spindle:110 / 84 Nmtool taper:SK 40 control:HEIDENHAIN iTNC 530 tool change unit:180 fachsize of pallet:500 x 500 mm mmmax. workpiece weight:600 kgspindle:34 / 28 kWrapid traverse:60 m/mintotal power requirement:68 kVAweight of the machine ca.:10,5 tdimensions of the machine ca.:9,5 x 7,5 x 3,4 mdimensions for transport:4,3 x 2,4 x 2,6 mhorizontal machining center with linear drives,,NC-roundtable,pallet pool RS 10 for totally 12 pallets,monitor for workpiece setting-up device,high pressure coolant through spindle 40bar,internal air blast supply,mode 4,hydraulic clamping 2/4 for workpiece setting-up device and working table,BLUM laser,oilmist suction,3D touch probe TS 649,tool-breackage control, mechanical,SDS spindle diagnosis system,flush gun,el. handwheel,chipconveyor,approx. 112.000 h "machine ...
x-travel:700 mmy-travel:550 mmz-travel:500 mmtool taper:SK40 spindle speed max.:12.000 U/minTool changer:30 fach electronic handwheel chip conveyor
x-travel:800 mmy-travel:840 mmz-travel:865 mmtotal power requirement:24 kWweight of the machine ca.:15,5 tdimensions of the machine ca.:4 x 3 m5 axes, 1 spindle A axis -30TO + 210 DEGB axis 360 x 0.001 Axis speed: X= 65 mm/min; Y= 55mm/min; Z= 60mm/min Spindle: 29 KW max. spindle speed = 1200 rpmmax. torque = 34.6 Nm Tools:HSK-A63 87 places in the magazine
x-travel:800 mmy-travel:800 mmz-travel:800 mmturning speeds:12.000 1/mintool taper:SK 50 control:SIEMENS 840D shopmill tool change unit:240 fachsize of pallet:630 x 630mm mmspindle:52 kW / 430Nm total power requirement:87 kVAweight of the machine ca.:15 tdimensions for transport:4,6 x 2,95 x 2,7 mhorizontal machining center,NC-round-table pallet-changer (2 pallets),Internal Coolant Supply 40 bar,prepared for Infrared Touch Probe Renishaw MP 10 without probe,tool-breakage control (mech.),MQL,airblast through spindle,oilmist suction,TRANSMIT funbction,accuracy package,mode 4,glass window right door,incl. FASTEMS FPC 1000 pallet pool for 14 pallets, incl. setting up station, control, and 10 palletsapprox. 98.500 h main switch on apprax. 45.500 Spindle hours
x-travel:800 mmy-travel:840 mmz-travel:865 mmcontrol:Siemens 840 D spindle speeds::10.000 rpmspindle drive motor:20 kWweight of the machine ca.:16 tdimensions of the machine ca.:4 x 3 m4 axes, 1 spindle A axis 360 x 0.001 Axis speeds: X= 65 mm/min; Y= 55mm/min; Z= 60mm/min Spindle torque = 262 Nm Spindle 20KW / 10,000 rpm Tool HSK-A100 57 places in the magazine
x-travel:800 mmy-travel:950 mmz-travel:1020 mmcontrol:HEIDENHAIN iTNC 530 table load capacity:800 kgtool taper:HSK 63 turning speeds:16.000 1/minspindle:35 / 25 kWtable-size:770 mmmax. torque on the spindle:160 / 223 Nmtool change unit:120 (2x60) Pos.weight of the machine ca.:20 tdimensions of the machine ca.:3,3 x 6,15 x 3,2 m5-axis simultaneously machining center with controlled swivel-rotary table (A/B-axis),milling head horizontal,internal coolant device (10-80bar),oilmist-suction,electromech. tool-length measuring device GROB,chipconveyor,3D touch probe,KINEMATICOPT,BLUM laser,el. handwheel,hour meter: approx. 80.500 h "machine on", approx. 48.500 h "spindle on"
V.V. manual; including accessories; suitcase; Unused in box
For sale is a robust multi-spindle in-line drilling machine of the STEINBACH brand, with four separately driven drill heads, ideally suited for parallel drilling processes in series production or in fixture structures. The system has a large machine table with T-slots on which workpieces can be clamped and precisely positioned. Each drill head is equipped with its own electric motor – ideal for applications with different drilling diameters or tools in one operation. The machine bed and overall structure are made of heavy-duty cast iron construction, perfect for low-vibration and precise operation. Technical features: Manufacturer: Steinbach Maschinenbau Type: In-line boring machine with 4 spindles Individual drives per spindle (visible) Large, continuous machine table with T-slots Stable cast iron design Condition: used, ready for use Areas of application: Serial producti ...
x-travel:560 mmy-travel:410 mmz-travel:460 mmtable-size:900 x 410 mmspindle cone ISO:40 turning speed range - stepless:7000 U/minfeeds:20-10000 mm/minrapid motion -longitudinal/cross/vertical:26 / 26 / 30 m/mintool piece magazine with:24 CNC-control:MAZATROL M plus total power requirement:38 kWweight of the machine ca.:5000 kgdimensions of the machine ca.:3,5 x 2,9 x 2,3 m hoch mnice machine from 2. handunder power in our stockincl. manualsincl. chip-troughcover on the top upcraded ( stainless steel )incl. cero point clamping device CHICK
x-travel:500 mmy-travel:400 mmz-travel:330 mmcontrol:FANUC 31i B5 tool change unit:21 fachrapid traverse in x-y-z axis:54 m/mintaper ISO:BT 30 turning speed range::10.000 1 / minspindle drive:11 / 3,7 kWmax. table load:300 kgsurface area:600x 400 mmDimensions (L/W/H):1,6 x 2,1 x 2,25 mrapid traverse:48 m/mintotal power requirement:11 kVAweight of the machine ca.:2,1 tvertical CNC-milling-drilling machining center,Infrared Touch probe,el. handwheel,autom. door on right side,no internal Coolant Supply,Approx. 65.500 hours "machine on", approx. 8.200 hours "machine run"
:HBM-110 | HBM-110L | HBM-110XL spindle diameter:110 mmx-travel:900|1250|1600 mmy-travel:900|900|1200 mmz-travel:1400|1400|1400 mmW-axis (spindle longitudinal):600 mmB-axis (table):360x1 °table load:5 ttable-size:1100 x 960|1250 x 1100|1250 x 1100 mmT-slots:22 mmspindle speed:22 Stufen, 8-1000 1/minspindle taper:50 ISOrapid speed:(X / Y / Z / W) 2500 mm/minspeed - faceplate:4-200 1/mintorqe of face plate:1960 Nmdia of faceplate:630 mmmovement of facing slide:180 mmweight of the machine ca.:11,5|18|20 tmain drive:7,5 kWMachine size (LxWxH):5120x3380x3100 mm2-Axis DRO :für X- und Y-Achse (von NEWALL) CE-design:von TÜV Süd servo motors:von Siemens/Fanuc/Fagor CNC controls from:Siemens/Fanuc/Fagor
:HBM-130 | HBM-130L | HBM-130XL spindle diameter:130|130|130 mmx-travel:1600|2000|2000 mmy-travel:1400|1800|1800 mmz-travel:2000 mmU-axis:250 mmW-axis (spindle longitudinal):900 mmmax. torque on the spindle:3200 NmB-axis (table):360x1 °rapid speed:X/Y/Z/W: 2500 mm/mintable load:8|10|10 ttable-size:1600 x 1400|1800 x 1600|2200 x 2000 mmT-slots:9/11/12 Stk.T-slot - width:28 mmtransmission ratio:4 Stk.spindle speed:4-800 1/minspindle taper:50 ISOfaceplate:Drehmoment: 4900 Nmfaceplate:2.5-125 1/minfaceplate:Umdrehung stufenlos einstellbar faceplate:Ø:750 mmweight of the machine ca.:22,5|24,5|25,5 tmain drive:22 kWMachine size (LxWxH):6995/3647/342|7030/4665/3800|7030/4665/3800 mmPLC control:Siemens S7 servo motors:von Siemens/Fanuc/Fagor Technical Offer of HBM-130? Powerful servo spindle motor and four spindle speed rang, stepless in each range. much lower maintenance and 80% failure ra ...
x-travel:700 mmy-travel:420 mmz-travel:380 mmcontrol:SIEMENS 840D sl tool change unit:15 fachtaper ISO:BBT 30 turning speed range::10.000 1 / minrapid traverse:60 m/mindiameter of tools max.:80 mmmax. tool length:250 mmmax. tool weight:3 kgfeed power:5.000 Nchange-time chip to chip:1,5 secDimensions (L/W/H):3 x 2 x 2,6 mtotal power requirement:22 kVAweight of the machine ca.:4,1 t3 axis simultaneously milling-drilling machining center,table 840 x 420mm,direct measuring system,airblast outside,NANO package (higher temperature stability),TROPICAL package (up to 50°C),PROGRESSline,BDE interface,el. handwheel,RENISHAW touch probe OMP 40-2table touch probe,prepared for handling-system incl. autom. door left site,prepared for hydr. interface,internal Coolant Supply 40bar, 400l,airblast,chipconveyor (dropping height 1.050mm,el. keysystem incl. key,Approx. hours "machine on", approx. hours "s ...
x-travel:800 mmy-travel:800 mmz-travel:800 mmturning speeds:35-10.000 1/minspindle:37 / 30 kWmax. torque on the spindle:525 / 206 NmTool bore:BT 50 rapid traverse:60 m/mintool change unit:160 Pos.size of pallet:500 X 500 mmcontrol:MAZATROL 640M Nexus c-axis:0,001° x 360.000 workpiece weight:1.000 kgworkpiece height max.:1.000 mminterference area:900 mm2 pcs. horizontal machining centers (HCN 6000 + HCN 6000-II, 2008), interlinked with pallet pool (16 pallets) MAZAK FMS,2 pallet changer,chipconveyor,coolant device with internal coolant supply,
Troostwijk Auctions
