Manufacturer:
(Category: 101)
spindle speed::max. 12000 tool taper:HSK 80 .b-axis:360 x 0,001 °worktool support (A-axis):+40 / -95 °weight of the machine ca.:25 500 Kgs.x-travel:800 mmy-travel:700 mmz-travel:630 mmdimensions of the machine ca.:6200 x 3000 x 3200 mmpallet size::500 x 500 mmno. of tools in the magazine:61 Nos.Weight approx.:23,5 tHorizontal Machining Center with CNC Control System SIEMENS 840 C in well maintained condition.Single spindle
Unused, handbook available
x-travel:510 mmy-travel:510 mmz-travel:510 mm:550 x H 800 mmB-axis (table):0.001 Gradtable-size:400 mmtable load:400 kgspindle drive:22 kWspindle nose:40 BBTspindle speeds:15000 1/minnumber of tools:60 tool diameter:150 mmtool length - max.:410 mmweight of tools max.:8 kgmilling feeds:1-20.000 mm/minrapid speed:60 m/minMachine size (LxWxH):1750x5060x2720 mmweight of the machine ca.:9 tinner coolant:70 bar3 chip conveyor:2 fachautomatic tool changer:60 fachAutomatic Pallet :2 Stück:von LHL Brand new horizontal machining center with: CONTAINS:1. Control system Fanuc Oi-MF (10.4" Screen)2. Working table size: 400 x 400 mm3. Max. workpiece dimension: DIA. 550 x H 800 mm4. Max. table load capacity: 400 kgs each pallet5. Spindle center to table surface: 80 ~ 590 mm6. Table center to spindle nose: 70 ~ 580 mm7. X/Y/Z Stroke 510/510/510 mm8. X/Y/Z Stroke rapid traverse: 60/60/60 m/min9. Spindle ...
x-travel:800 mmy-travel:950 mmz-travel:1020 mmweight of the machine ca.:17 tdimensions of the machine ca.:6 x 3 x 3,2 mDiameter of the table:770 mmmax. table load:800 kgtool taper:HSK-A63 max. tool length:465 mmno. of tools in magazin:60 spindle turning speed range:12.000 U/minfeed power:8 kN kppower capacity:25/35 kW5 axisG550-1024 HSK A-63Grob (Bezeichnung G550-1024): 4529h1 spindle
x-travel:780 mmy-travel:560 mmz-travel:560 mmweight of the machine ca.:10 tNumber of axles:5 St.spindle turning speed range:20-12.000 U/minnumbers of tools in magazin:30 tool taper:SK 40 surface area:500 x 630 mmRound TableB-Axis
magnetic drilling machine Brand: Stahlgruppe Type: SG450M Max. drilling diameter: 35 mm drilling diameter Power: 1600 watts Connection: 230 volts Magnet Strength: 16000 Newton Speed: 810 rpm Drilling depth: 145 mm drilling depth Includes: Oil reservoir for cooling and lubrication Security: Strap for fall protection Condition: unused, in the original packaging
x-travel:700 mmy-travel:630 mmz-travel:700 mmweight of the machine ca.:15 tdimensions of the machine ca.:4,20 x 2,90 x 2,90 mpallet size::500 x 500 mmtool taper:SK 40 Tool taper:HSK-A 63 turning speed range:10.000 U/min
Distance between chuck and clamping table 240 mm
x-travel:510 mmy-travel:400 mmz-travel:350 mmtable-size:600x400 mmspindle speeds:12000 (Motorspindel) 1/min.spindle drive:5,8 kwspindle taper:30 BBT oder SKrapid traverse in x-y-z axis:60 m/minTool changer:16 fachweight of the machine ca.:2,8 tCNC controller:SIEMENS 828D (10.4" LCD+SHOPMILL) high speed directl spindle motor:12000 1/mininner coolant:20 barchip conveyor - auger:im Bett Brandnew machine with: 1. CONTROL SYSTEM SIEMENS 828D (10.4" LCD+SHOPMILL)2. WORKING TABLE SIZE: 600 X 400 MM3. MAX. TABLE LOAD CAPACITY: 250 KGS4. SPINDLE SPEED 12.000RPM (DIRECT DRIVEN TYP)5. SPINDLE MOTOR 5.8 KW (1PH8087)6. SPINDLE NOSE BBT 307. X/Y/Z STROKE 510/400/300 MM8. X/Y/Z STROKE RAPID TRAVERSE: 60/60/60 M/MIN9. ATC CAPACITY 16 TOOLS (DISC TYPE)10. STANDARD SPLASH GUARD11. ELECTRICAL CABINET WITH HEAT EXCHANGER12. COOLANT UNIT13. MANUAL PULSE GENERATOR14. RIDGID TAPPING15. WITHOUT TRANSFORMER (POW ...
x-travel:2000 mmy-travel:1600 mmz-travel:1140 mmb-axis:0.0001° x 360° °number of pallets:4 table surface area:1000 x 1450 mmmax. table load:6.000 kgturning speed range:4 - 10000 U/minpower capacity at 100 % load:40 kW kWtool taper:HSK100 DIN69893A machine weight ab.:63.000 kgspace required L x W X H:12320 x 11000 x 4700 mmincl. 50 x HSK100 tool tapers
50/60Hz; core drill dia 35mm; twist drill dia 13mm; stroke 210mm; cable length 2.5M; 7750
x-travel:760 mmy-travel:760 mmz-travel:760 mmtotal power requirement:43 kWweight of the machine ca.:11,5 tdimensions of the machine ca.:2,7 x 4,73 x 2,87 mmax. table loading capacity:500 kg
:VF 108 x-travel:1080 mmy-travel:600 mmz-travel:600 mmdistance spindle center to column:630 mmdistance spindle center to table:100-700 mmtable-size:1280x600 mmtable load:1000 kgT-slot (width-distance-quantity):18x100x5 mmspindle nose:A63 HSKspindle speed max.:15000 U/minspindle drive:7,5/27 kWmax. torque on the spindle:55/100 Nmrapid traverse in x-y-z axis:36/36/24 m/minmilling feed range:1-10.000 mm/minTool changer:24 fachmax. tool length:300 mmmax. tool weight:8 kgmax. tool diameter:80|130 mmpositioning accuracy:+/- 0,01 mmrepeating accuracy:+/- 0,008 mmtotal power requirement:30 kWMachine size (LxWxH):4920x3510x2970 mmweight of the machine ca.:7,25 tBrand-new CNC vertical machining center with CNC control FANUC or HEIDENHAINWarranty: 12 monthsMore information can be found in the Appendix.
x-travel:750 mmy-travel:406 mmz-travel:508 mmweight of the machine ca.:4 tbore spindle turning speed range:12.000 U/minHAAS VF-2 is a 3-axis machining center designed for precision, high accuracy and reliability.
x-travel:600 mmy-travel:580 mmz-travel:530 mmdistance spindle center to column:630 mmdistance spindle center to table:100-600 mmmilling feed range:1-10.000 mm/minmax. table load:200/100 kgmax. tool weight:8 kgpositioning accuracy:+/- 0,01 mm:8000/15000 1/minspindle drive:7,5/11,5 /5,5 kWrepeating accuracy:+/- 0,008 mmweight of the machine ca.:7,4 / 7,65 tBrand-new CNC vertical machining center with CNC control FANUC or HEIDENHAINWarranty: 12 monthsMore information can be found in the Appendix.
spindle diameter:110 mmx-travel:1600 mmy-travel:1000 mmz-travel:1250 mmw-axis:Ausfahren der Spindel: 400 mmB-axis (table):360 x 1° mmDistance table/spindle center:0-1000 mmtable load:2,5 ttable-size:1000x800 mmT-slot (width-distance-quantity):22H8 x 7 x 100 mmtool taper:50 ISOspindle turning speed - stepless:2 Stufen: 20-1000 1/minfeeds:X/Y/Z-Achse: 3-950 mm/minfeeds:W-Achse: 3-400 mm/minrapid speed:X/Y/Z-Achse: 2,8 m/minrapid speed:W-Achse: 2 m/minmain drive:15 kw (drehzahlgeregelt) feed motors:X/Y/Z-Achse-Servomotoren: 2,9 kWFeed motor:W-Achse-Servomotor: 1,3 kWrange L-W-H:3.874 x 4.317x3.715 mmweight of the machine ca.:12 ttotal power requirement:20 KVAAutomatic tool clamping:pneumatisch ball screw in axes:X/Z/W CNC controls from:Siemens/Fanuc/Fagor
: neu : 2024 : 3984 : prompt, Zwischenverkauf v : Spanien : 9930 €: 191.65 €: 1 : 32 mm: MK 3 : 250 mm: 65 - 125 - 185 - 365 - 54 U/min: M24 : 665 mm: 640 mm: 2100 mm: 260 kg: Automatisch 0,10 - 0,20 - mm/U: 100 mm: 85 - 635 mm: 1.170 mm: 300 x 270 mm: 665 x 400 mm: 120 mmERLO (MADE IN SPAIN)FOR DEMANDING WORKSHOP USEgeardrive machine3 aut. feedsleft-right drillingtable with t-slotsdepth adustable endtool ejectordrill guardCE normsuser manual in GERMAN(symbol photo)OPTIONS:lighting equipmentinkl.coolant equipment and machine base with T-slotsinkl.reverse for tapping€ 810,--The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 10 Wochen ab Auftrags : Türkei : 59600 €: 1126.44 €: 3100 mm: 10 mm: 6 mm: 50 mm: 13 1/min: 1.5 °: 16 : 22 to: 1000 mm: 200 mm/s: 22 kW: 200 l: 2 Stk.: 865 mm: 580 mm: 3515 mm: 4200 mm: 2250 mm: 3600 mm: 2100 mm: 9300 kgSwing cut constructionNC-preselection system D-touch 7 with touch screen for back gauge, cutting length, quantity, USB portMotorized back gauge 1000 mm on ball screws, folding upwardsClear control panel mounted on moveablearmHydraulic hold down pistons are arrangedclose to the cutting edgeFoot switchCentral, manual blade gap adjustmentCutting line illuminationBroad table with ballsPiece counterSingle and continous stokeFold up finger guard 1.000 mm1 squaring arm 1. 500 mm with scale,T-slot and tilting cam2 supporting arms 1.000 mm with T-slotSimple replacement and grinding of thebladesVariable adjustable cuttinglength for economic processingLower blade f ...
x-travel:600 mmy-travel:410 mmz-travel:520 mmtool change unit:16 turning speeds:8000 1/mincontrol:SIEMENS 810 shopmill table surface area:840 x 420 mmrapid traverse X- and Y-axis:36 m/minrapid traverse Z-axis:20 m/mintaper ISO:SK 40 spindle drive:15 kWweight of the machine ca.:2,5 tspace requirements approx. LxWxH:2,2 x 2,3 x 2,3 mvertical machining center,el. handwheel,no chipconveyor,approx. h "machine on", approx. h "spindle on"
: neu : ca. 10 Wochen ab Auftrags : Türkei : 51600 €: 975.24 €: 3080 mm: 6 mm: 4 mm: 350 mm: 20 1/min: 0,5 - 2 °: 16 : 20 to: 1000 mm: 200 mm/s: 11 kW: 125 l: 3 Stk.: 820 mm: 494 mm: 3280 mm: 4100 mm: 2050 mm: 3650 mm: 1950 mm: 7980 kglinear guidedCNC touch screen D-touch 7back gauge,cutting angle,cutting gap,cutting length, quantityUSB portcutting line illuminationfoldable ball screws for back gaugeballs in tablefoldable finger protection, 1.000 mmside lay with T-slot, tilting cam and scale3 support arms wit T-slotsoilfillinglight barrier on the back of the machineuser manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Machine: Radial drilling machine ATELIERS GSP 405 T 125 Manufacturer: GSP WORKSHOPS – Courbevoie, France Model: 405 T 125 Serial No.: 2640 Type: High Capacity Radial Drill with Motorized Arm and Self-Tightening Chuck Supply voltage: 220 V – 50 Hz Motor power: 1.1 kW – NOVACEM COMPAX asynchronous motor Drilling capacity: 50 mm in steel Arm length: 1250 mm Column diameter: approx. 300 mm Table Surface: 900 × 700 mm T-Grooved Total height: approx. 2400 mm Weight: approx. 2000 kg Equipment: – Motorized height-adjustable drilling head – Automatic advance and micrometric lowering adjustment – Reversal of the direction of rotation – Solid cast iron table with T-slots – Arm and spine locking device – Centralized manual controls – NOVACEM asynchronous motor greased for life, DC rotor compliant with NF C51-100 – Electrical cabinet redone, integrated ABB circuit breaker Gen ...
x-travel:960 mmy-travel:600 mmz-travel:480 mmrotary table::D 350 mmtable load:200 kgspindle turning speed range:12.000 1/mindrive capacity - spindle motor:14/10 kWcontrol:HEIDENHAIN iTNC 530 rapid traverse:32 / 32 / 24 m/minTool changer:30- fach spindle taper ISO:BT 40 weight of the machine ca.:7,4 ttotal power requirement:45 kVAdimensions of the machine ca.:3,1 x 2,3 x 3,1 m5-axis simultaneously universal-machining center,NC-rotary-swivelling table dia. 350mm,A-axis (120/-42°), C-axis 360°,Internal coolant supply, el. handwheel,chipconveyor,direct measuring system,Hour meter: approx. 9.000 h "machine on", approx. 3.500 h "spindle on"
Modell:RB 50 | RB 63 | RB 80 bore capacity in steel (diameter):50 | 63 | 80 mmarm length:1600 | 2000 | 2500 mmworkpiece height max.:1220 | 1600 | 2000 mmDistance between spindle and column, max.:1600 | 2000 | 2500 mmDistance between spindle and column, min.:350 | 400 | 450 mmspindle taper MT:5 | 5 | 6 MKspindle turning speed range:25-2000 | 20-1600 | 16-1250 U/mintransmission ratio:16 Stk.feed range:0.04-3.20 | 0.04-3.2 | 0.04-3.2 mm/mindice table:630x500 | 630x800 | 800x1000 mmpower capacity:4 | 5,5 | 7,5 kWWeight approx.:3500 | 7000 | 11000 kgMachine size (LxWxH):2500x1070x2840 | 3080x1250x3291 | 3730x1400x4025 mmcube table GB/T6170:Größe siehe tech. Daten foundation bolts:6 Stückslots with screws:6 Stückreducing bush:MK 3/1, MK4/2, MK 4/3, MK 5/4 payment: 100 % before loadingwarranty:12 months
spindle diameter:180 mmx-travel:6.000 mmy-travel:2.900 mmtotal power requirement:95 kWweight of the machine ca.:130 mit Zubehör tz-travel:1.250 Ram mmw-axis:1000 Spindel mmram stroke:1250 mmdimension of the ram:450 x 450 mmbore spindle stroke:1000 mmbore spindle turning speed range:920 1/minpowered rotary table: IOS 40 CNC 2 Achsen B u.V Rotary-table:3000 x 3500 mmRotary-table: CNC-IOS 40 NC mmstepless adjustable, relative to diameter:Index 4x 90° -360000 Winkel =0,001 Grad mmtravel - cross:Längs 1230 mmtable load of rotary table max.:40 Tonnenclamping plate:3 x 8000 x 2000 mmCNC Ram-Type Floor Boring and Milling machine,dismantled and storedThe headstock sliding guides were recoated and scraped.
HD Werkzeugmaschinenhandel GmbH
