Manufacturer:
(Category: 101)
The machine is in good technical condition; it can be tested by prior arrangement.
The machine is in good technical condition; testing is possible by prior arrangement. A probe is included.
The machine is in good technical condition; testing is possible by prior arrangement. X-axis travel: 850 mm; Y-axis travel: 700 mm; Z-axis travel: 500 mm. Table dimensions (LxW): 10; load capacity: 2000 kg. Rapid traverse (XYZ/BC): 35 m/min. Spindle head: HSK-A63; speed: 0–18,000 rpm; spindle motor power: 20 kW. Tool positions: 38. Control system: Heidenhain TNC 640. Air through spindle. Heidenhain TS460 touch probe. Electronic handwheel. Approx. 20 HSK-A63 tool holders (in the changer). Manual cabin roof. Preparation for mist extraction system. Wash-down gun. Original HERMLE + Heidenhain documentation.
The machine is in good technical condition; testing is possible by prior arrangement. TNC530, HSK63, 12,000 rpm, 28-position tool magazine, 40-bar through-spindle coolant (IKZ), laser tool breakage detection.
3 digital axes Axis: X Longitudinal: 510 mm - Transverse Y: 510 mm - Vertical Z: 510 mm Worktop surface dimension: 650 x 510 mm Load capacity: 350 kg Spindle Speed Range: Acramatic 850 SX - 60 -8000 tmm Storage capacity: 21 tools Automatic tool change time 7.5s Maximum weight of tool and tool holder: 6.8 kg Fast travel speed Xet Y axes: 20000 mm/min Z-axis fast travel speed: 18000 mm/min
Capacity: 3-axis Stroke: Longitudinal X:300 mm - Vertical Y: 350 mm- Transverse Z: 250 mm Spindle motor: Max speed: 6000rpm Continuous power :3.7 kW Peak power :5.5 kw Table: Dimensions: 300 x 300 mm Mounting: M8 centerline: 50 m Fast travel speed: 10 m/min Fast Rotation Speed B: 10RPM Tool Holder Type: BT40 Number of pitches :20
Table dimensions ( x-y/mm) 1100 x 600 Stroke ( X/mm) 800 Stroke ( Y/mm) 650 Stroke ( Z/mm) 550 Number of spindle per minute 20 - 1000 Tool magazine yes Number of inserts in the tool magazine 25 Chuck connection iso 40
Key data: 800 mm, 1050 mm, 850 mm
We hereby offer you a 5-axis machining centre from DMG as follows: Basic machine data Make: DMG Type: DMC 80 U duoBlock Year of Make: 2014 Condition: Very good Control: Name: Heidenhain 640 Handwheel Heidenhain Technical data: • Spindle: 20-20000 rpm, infinitely variable • HSK-A63 interface • 123x WZW • B-axis (infinitely variable) • C-axis as pallet carrier • 2-fold pallet changer • Pallet size: 800 mm x 630 mm • IKZ (internal coolant supply) • Operating station for WZW • Coolant tank with paper belt filter • Signal light • 3D quickSET • Infrarottprobe • Blum Laser Prior sale is reserved. No liability is assumed for the technical information provided here. The legal provisions apply.
Key data: 1000 mm, 1000 mm, 1000 mm
We hereby offer you a 5-axis machining centre from DMG as follows: Basic machine data Make: DMG Type: DMC 100 U duoBlock Year of Make: 2006 Condition: Very good Control: Name: Heidenhain iTNC 530 Handwheel: Heidenhain HR 410 Technical data: • Spindle: 18000 rpm, infinitely variable • HSKA-63 interface • 180x WZW • 2-fold pallet changer • Pallet size: 1000 mm x 800 mm • NC swivel rotary table • IKZ (internal coolant supply) 40 bar • Chip conveyor • Coolant tank with paper belt filter Prior sale is reserved. No liability is assumed for the technical information provided here. The legal provisions apply.
Key data: 1000 mm, 1250 mm, 1000 mm
We hereby offer you a 5-axis machining centre from DMG as follows: Basic machine data Make: DMG Type: DMC 100 U duoBlock Year of Make: 2015 Condition: Very good Control: Name: Heidenhain iTNC 530 Handwheel: Heidenhain Technical data: • Spindle: 20-12000 rpm, infinitely variable • HSK-100 interface • B-axis (infinitely variable) • C-axis as pallet carrier • 2-fold pallet changer • Pallet size: 1000 mm x 800 mm • 180x WZW • Max. workpiece weight: 2000 kg • IKZ (internal coolant supply) 40 bar • 980 l coolant tank with paper belt filter • Blowing air through spindle center • Chip conveyor • Probe TS 649 • Tool breakage detection • Machine Protection Control (MPC) • 3D quickSET • ATC • BA 4 (extended manual intervention) Prior sale is reserved. No liability is assumed for the technical information provided her ...
Key data: 730 mm, 560 mm, 560 mm
We hereby offer you a 5-axis machining centre from DMG as follows: Basic machine data Make: DMG Type: DMU 60 monoBlock Year of Make: 2006 Condition: Good Control: Name: Heidenhain iTNC 530 Handwheel: Heidenhain HR 410 Technical data: • Spindle: 20-18000 rpm, infinitely variable • HSK-A63 interface • 60x WZW • Rotary table Ø 600 mm (C-axis) integrated into 1000 mm x 600 mm • B-axis (infinitely variable) • IKZ (internal coolant supply) 40 bar • 600 l cooling lubricant tank with paper belt filter • Chip conveyor • Rinsing gun • Oil and emulsion separation plant • Blowing air through spindle center Prior sale is reserved. No liability is assumed for the technical information provided here. The legal provisions apply.
Key data: 750 mm, 650 mm, 560 mm
We hereby offer you a 5-axis machining centre from DMG as follows: Basic machine data Make: DMG Type: DMU 75 monoBlock Year of Make: 2017 Condition: Very good Control: Name: Heidenhain TNC 640 Handwheel: Heidenhain Technical data: • Spindle: 20-20000 rpm, infinitely variable • HSK-A63 interface • 60x WZW • Swivel rotary table • CNC rotary table Ø 650 mm • Integrated with 800 mm x 650 mm • IKZ (internal coolant supply) 40 bar • 600 l coolant tank with paper belt filter • Flushing gun with pump, 2 bar // 40 l/min • Chip conveyor • Cooling device blowing air by spindle medium, selectable via M-function • Oil and emulsion mist separation system, mechanical filter, throughput volume 600 m³/h • Infrared probe Heidenhain TS 649 • 3D quickSET • Spindle load indicator for main drive, integrated in headstock cover • Mech ...
Key data: 1000 mm, 900 mm, 700 mm
We hereby offer you a 5-axis machining centre from DMG as follows: Basic machine data Make: DMG Type: DMU 100 eVo Year of Make: 2013 Condition: Very good – machine partially overhauled in 2023 Control: Name: Heidenhain iTNC 530 Handwheel: Heidenhain HR 410 Technical data: • Spindle: 18000 rpm, infinitely variable • HSK-A63 interface • 60x WZW • Swivel rotary table 950 mm x 800 mm • B-axis 5°/+110° • C-axis 360° • IKZ (internal coolant supply) 40 bar • 600 l coolant tank with paper belt filter • Chip conveyor • Rinsing gun • Blowing air through spindle center Prior sale is reserved. No liability is assumed for the technical information provided here. The legal provisions apply.
Key data: 800 mm, 800 mm, 800 mm
We hereby offer you a 5-axis machining centre from DMG as follows: Basic machine data Make: DMG Type: DMU 80 P duoBlock Year of Make: 2006 Condition: Good Control: Name: Heidenhain iTNC 530 Handwheel: Heidenhain HR 410 Technical data: • Spindle: 18000 rpm, infinitely variable • HSK-A63 interface • 120x WZW • B-axis (infinitely variable) • C-axis • Table size: 900 mm x 700 mm • Table load: max. 1400 kg • IKZ (internal coolant supply) 40 bar • Chip conveyor • Coolant tank with paper belt filter Prior sale is reserved. No liability is assumed for the technical information provided here. The legal provisions apply.
The machine is in good technical condition; testing is possible by prior arrangement. Fully equipped, with tooling and accessories valued at approx. 1 million. X-axis travel: 1050 mm; Y-axis travel: 900 mm; Z-axis travel: 600 mm. Control system: Heidenhain TNC 640. Max. spindle speed: 18,000 rpm. Table clamping surface: 900 x 750 mm. Tool positions: 42. Tool holder: HSK 63A. Max. tool diameter: 80 (125) mm. Max. tool length: 225 mm. Max. tool weight: 8 kg. T-slots – width: 18 mm; spacing: 100 mm. Center bore: 32 mm. Rotation range: 360°. Tilt range: +/- 115°. Max. table load: 1500 kg. Rapid traverse (X/Y/Z): 35/35/35 m/min. Operating hours: approx. 8,500 h. Spindle hours: approx. 2,500 h. Machine weight: approx. 15 t.
Two Willemin-Macodel W 408 and four Willemin-Macodel W 408S are available, year of manufacture W 408: 1997, 2002, year of manufacture W 408S: 2005, 2006, 2007, 2008, an on-site inspection is possible.
Number of axes: 3, control: FANUC, connected load: 10kVA, weight: 3.7t, an on-site inspection is possible.
Controls: EIP, voltage: 230V, connected load: 3kVA, with CE marking. An on-site inspection is possible.
A Mikron CNC universal machining center in need of repair is offered. Operating voltage: 400V, frequency: 50Hz, rated current: 40A, control voltage: 24V DC, control: Heidenhain TNC 426, weight: approx. 5800kg. The tool changer is defective and the hydraulic accumulator is empty or defective. The machine has been used in production in single-shift operation with these limitations in recent years. The tools were changed manually, otherwise the machine can be operated. An on-site inspection is possible.
5 adjustable drilling speeds by rerouting the v-belt. Drill chuck 13 mm with key. Auction-ID: A1-48994-38
x-travel: 630 mmy-travel: 560 mmz-travel: 560 mmControl: total power requirement: --- kWweight of the machine ca.: 6,8 tdimensions of the machine ca.: --- mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 36.0 mmbore capacity in cast iron: 45.0 mmthroat: 300 mmbore stroke: 160 mm: 4 speeds: 65 - 2000 U/mincolumn diameter: 145 mmtable-size: 615 x 460 mmfeed: 0.1 / 0.2 / 0.3 mm/Utotal power requirement: 1.75 / 2.5 kWweight: 440 kgdimensions: 1200 x 800 x 2300 mm Current list price: approx. 18.000 euros Special price available upon request Features:- Robust column drill press (V-belt drive)- Electromagnetic feed clutch = spindle feed with overload protection and electric cross-handle control- mushroom-head pushbutton (latching) for EMERGENCY STOP located on the front panel- continuously variable speed control- clockwise rotation of the drill spindle- Pole-reversible drive motor - Infinitely adjustable drilling depth stop - Work table with 2 T-slot - height-adjustable- Separate coolant system, with reservoir - Operating instructions in GermanThe data for thi ...
A - T-slot size: approx. 21.5mm, B-35, thread M20 16 T-slot nuts 20 pcs threaded rods M20, L-120 – 400mm 3 x 2 pcs clamping claws 4 nuts long, 6 nuts, washers 2 blocks for adjustment with adjustment screw 4 blocks 80 x 60 x40mm ( underlay ) Price : Euro 400,- ex works ! B - T-slot size : approx. 17, thread M16 20 T-slot nuts approx. 17, B-28-32mm 6 clamping claws 4 pcs. Threaded rods M16 – L110 AMF 12 winding rods L to 260mm 16 Pcs Nuts, Weight approx. 24Kg Price: Euro 150,- C - Clamping Set Clamping Clamps, Groove Width approx. 21.5mm W-36mm, M16 2 pcs. 0 – 25 – 70 , M16 with clamping claws 2 pcs. 100 – 220 , M16 with clamping p. 2 pcs. 200 – 320, M16 WITH clamping pr. 2 threaded rods M20 L-310 2 threaded rods M20 L 150 1 adjustment block, 4 nuts, 6 nuts Weight: approx. 30kg , Price : 360,- ex works ! D- groove width : approx. 28mm , ...
CNC machining center FEHLMANN Picomax 56 TOP TECHNICAL FEATURES: Year: 2015 CNC Type: HEIDENHAIN TNC 620 X-axis travel: 500 [mm] Y-axis travel: 400 [mm] Z-axis travel: 400 [mm] X, Y and Z axis travel speed: 20000 [mm/min] Min. Distance. Spindle/Table: 120 [mm] Max. distance spindle/table: 520 [mm] Table dimensions: 908 x 480 [mm] Max. weight permissible on the table: 250 [Kg] Pin attachment: ISO 30 Maximum speed Spindle: 12000 [rpm] Number of tool magazine stations: 20 Max. Length of Tool: 240 [mm] Maximum weight per tool: 3 [Kg] Max. tool diameter: 130 [mm] Tool Change Time: 3 [sec] Time between cuts: 8 [sec] Number of cutting hours: 1463 [h] Rated Current: 25 [A] Supply voltage: 400 [V] Machine weight: 3250 [Kg] EQUIPMENT INCLUDED: HEIDENHAIN measuring rulers on the X, Y and Z axes x1 FRIBOSA Switzerland precision clamping vice x1 RENISHAW pa ...
Key data: 1760 mm, 600 mm, 800 mm
Control: Name: Heidenhain iTNC 530 Technical data: • Spindle: 10000 rpm • Swivel head: -90° to +90° • 22-fold tool changer • Table size: 2380 mm x 600 mm • Internal coolant supply (IKZ) • Chip conveyor • Coolant system Prior sale is reserved. No liability is assumed for the technical information provided here. The legal provisions apply.
CNC Machining Center Hedelius Forte 65 Single 1320 Control: Heidenhain TNC 640 Year of Make: 2019 Availability: in stock Internal machine no. 74 Travels: X-axis 1,320 mm Y-axis 650 mm Z-axis 600 mm Total clamping area 1,500 x 650 mm Table load: approx. 1,200 kg Mount: HSK 63 Tool magazine: 65 compartment Spindle speed: 18,000 rpm Drive power: 35 kW Facilities - Inclined bed coolant system 900 l - IKZ 25 bar - Chip conveyors - 1x Rinsing gun - Electronic handwheel
CNC Machining Center Hedelius Forte 7-2600 Magnum Control: Heidenhain TNC 640 Year of Make: 2020 Availability: in stock Internal machine no. 73 Travels: X-axis 2,600 mm Y-axis 750 mm Z-axis 800 mm Pendulum operation: 2 x 1,000 mm Total clamping surface 2x 1,490 x 750 mm Table load: approx. 2,500 kg Mount: HSK 63 Tool magazine: 50 compartments Spindle speed: 50 - 18,000 rpm Drive power: 35 kW Facilities - Inclined bed coolant system 900 l - Chip conveyors - 2x dishwashing gun - Electronic handwheel - Partition wall prepared - High pressure pump 60bar - 0-point clamping platens - Vises and tools as required - Prepared for work space partition wall
Key data: 4000 mm, 1200 mm, 800 mm
Control: Name: Heidenhain iTNC 530 Handwheel: Heidenhain HR 410 Technical data: • Spindle: 20-7000 rpm • A-axis: - 181° to + 10° • 60-fold tool changer • SK50 interface • NC rotary table: Ø 1500 mm • Table size: 4150 mm x 1500 mm • Internal coolant supply (IKZ) • Chip conveyor • Signal light Machine has approx. 28,000 program running hours Prior sale is reserved. No liability is assumed for the technical information provided here. The legal provisions apply.
10 € 
