Manufacturer:
(Category: 101)
Inv. Num. : 8555 Type: W 100 Producer: TOS Generated: Parameters: Work table length: 1250 mm Work table width: 1250 mm X-axis travel: 1600 mm Y-axis travel: 1120 mm Travel travel Z-axis: 1250 mm Spindle diameter: 100 mm Equipment: DRO
Inv. Num. : 8553 Type: VOC 1000 Producer: INTOS Created: 2003 Parameters: Control system: Siemens 810D Work table length: 1100 mm Work table width: 500 mm Maximum spindle speed: 8000 1/min Number of axes: 3 X-axis travel: 1000 mm Y-axis travel: 500 mm Travel Z axis: 500 mm Machine weight: 4500 kg
Inv. Num. : 8551 Type: M 1200 Producer: Microcut Created: 2018 Parameters: Control system: Siemens Sinumeric 828D SW4 Work table length: 1400 mm Work table width: 710 mm Maximum table load (even): 1000 kg X-axis travel: 1200 mm Y-axis travel: 730 mm Travel travel Z-axis: 650 mm Number of axles: 30 pieces Machine weight: 10500 kg
Inv. Num. : 8550 Type: VF-3 Producer: HAAS Created: 2017 Parameters: Control system: HAAS Work table length: 1219 mm Work table width: 457 mm Maximum table load (uniform): 1588 kg Spindle drive power: 22.4 kW Speed: 8100 1/min X-axis travel: 1016 mm Y-axis travel: 508 mm Z-axis travel: 635 mm Cone: BT 40 Machine weight: 5316 kg
Travel X/Y/Z: 1000mm/600mm/600mm, feed rate: 30m/min, rapid traverse: 30m/min, table dimensions X/Y: approx. 1200mm/600mm, max. table load: 800kg, tool stations: 24, tool holder: SK40, speed: 8000rpm. Machine dimensions X/Y/Z: approx. 3000mm/3500mm/3000mm, weight: approx. 5000kg, operating hours: approx. 10346h, spindle hours: approx. 10346h. Includes a compact filtration system Interlit SUK 200/550, year of manufacture: 2000. The machine is equipped with a new control system. Documentation available. An on-site inspection is possible.
Specifications: Travel X/Y/Z: 500 / 400 / 500 mm Distance between stand and spindle: 400 mm Spindle nose table distance: 102 - 610mm Distance floor-table: 787 mm Table size: 990 x 400 mm Ball screw diameter: 32 mm double bearing Rapid traverse: 25.4 m/min Max. feed rate in X/Y/Z: 20 m/min Spindle speed: 10 - 8000 1/min Spindle power: 11 kW (S1-100%), 16.5 kW (S6-40%) Tool holder: SK 40 Tool Slots: 21 Max. tool diameter: 76 mm for free neighboring seats: 114 mm Max. tool length: 380 mm Max. tool weight: 7 kg Pneumatic connection: 5.5 - 8 bar Weight, approx.: 3765 kg Equipment: GE Fanuc 0i-MC Control: - Standard CNC control - User-friendly graphic display - Easy operation, programming and diagnostic options Steinmeyer ETA and double-bearing ball screws: - Increased rigidity - Hardly any friction Cast iron substructure with robust flat guides: - Flame-cured ...
Inv. Num. : 8548 Type: XV 1000 Producer: Hardinge Bridgeport Created: 2007 Parameters: Control system: Siemens 810DE Work table length: 1100 mm Work table width: 500 mm Tool magazine: 20 pieces Maximum spindle speed: 8000 1/min Number of axes: 3 X-axis travel: 1020 mm Y-axis travel: 610 mm Travel Z-axis: 560 mm Machine weight: 6000 kg
5-Axis Vertical Machining Center DMG DMC 75V LINEAR Linear Motors The machine can be viewed in working order in our warehouse in Gussago, Brescia. Mimu Machine Tools Gussago BS Italy Dmg DMC 75 Linear Heidenhain CNC iTNC 530 Tool holder HSK 63 Spindle power 35 kW Spindle speed 18,000 rpm Number of tools 60 X-axis travel 885 mm Y-axis travel 600 mm Z-axis travel 600 mm Rapid feeds X-Y-Z linear axes 90 m/min Roller guides Fourth-axis head yes Fourth-axis head type continuous Fourth-axis head degrees -10° + 110° Rotary table yes Rotary table type continuous Table size 750 mm MACHINE EQUIPMENT Precision package with optical scales on the axes New spindle line The machining center is a machine tool equipped with a numerical control capable of performing multiple mechanical operations with a single setup on Multiple surfaces of the same workpiece. It is generally equipped with multiple m ...
x-travel: 800 mmy-travel: 700 mmz-travel: 600 mmcontrol: SIN 840D Powerline spindle turning speed - stepless: 1 - 8.000 U/minpower capacity at 40 % load: 28,00 kWpower capacity at 100 % load: kWmax. torque on the spindle: Nmspindle diameter in front bearing: 80,00 mmspindle taper: HSK-A100 B-axis: 187 °feed X/Y/Z-axis: 15.000 mm/minrapid traverse X/Y/Z: 50,00 m/minfeed force X/Y/Z axis: 10.000 Nrapid traverse B-axis: 11,20 U/minsize of pallet: 800 x 630 mmtable load: 0,80 tc-axis: 360,000 x 0,001 °table turning speeds: 1 - 500 U/mintoolpiece magazine: chain magazine: 120 Stücktool diameter: 100 mmtool diameter with 2 vacant positions: 160 mmtool length - max.: 350 mmweight of tools max.: 10,00 kgtotal power requirement: 60,00 kWweight of the machine ca.: 13,00 tdimensions of the machine ca.: 7,40 x 5,30 x H3,50 mWith Siemens SIN840D control, tool taper cleaning, tool breakage monito ...
bore capacity in steel (diameter): 60 mmCenter of spindle to wall or column: min./max. 320 - 160 mmspindle turning speed range: 20 - 2.500 U/minquill stroke: 310 mmtotal power requirement: 4 kWweight of the machine ca.: 4.500 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
3-axis machining centre with automatic 8-fold tool changer for aluminium, PVC or steel profiles Max. machining length: 7200 mm Max. travel Y-axis: 480 mm Max. travel Z-axis: 325 mm Control system E 500 Speed infinitely variable up to 6,000 rpm Minimum quantity spraying 2 angle heads High-speed spindle Tensioner detection and displacement 8 pneumatic material tensioners Pendulum operation possible through 2 light barrier areas Loading included in the price Weight: approx. 5,000 kg
3-axis machining centre with automatic 8-fold tool changer for aluminium or PVC profiles Max. travel X-axis: 4200 mm Max. travel Y-axis: 480 mm Max. travel Z-axis: 325 mm Control system E 500 Speed infinitely variable up to 6,000 rpm Hand-held control unit Minimum quantity spraying Double-sided angle head and a high-speed spindle Tensioner detection 8 pneumatic material tensioners Light barrier
Radial drill Manufacturer: Valmer Type: TR 80/2500 SP Year of Make: 2006 Table dimensions: 1,000 x 800 x 560 mm Drilling diameter max.: 80 mm Max. tap diameter: 42 mm Max. spindle axle/column distance: 2,500 mm Max. distance between spindle axle and column: 500 mm Head movement horizontally: 2,000 mm Max. distance between spindle nose and working surface: 2,000 mm Distance between spindle nose and working surface min.: 550 mm Spindle stroke: 450 mm Morse taper: MT 6 Power: 7.5 kW Machine dimensions: 3,730 x 1,400 x 3,825 mm Weight: 11,000 kg
The machine is in good technical condition, a test run is possible by prior arrangement. Control: Heidenhain TNC 530 18,000 rpm, SK 40, 32 tool positions, 4 axes. A fifth rotary axis mounted on the table has been retrofitted.
x-travel: 1800 mmy-travel: 700 mmz-travel: 700 mmcontrol: Heidenhain iTNC 530 table surface area: 2100 x 700 mmtable load: 1500 kgturning speeds: 20 - 18000 U/mintaper ISO: SK 40 spindle motor: 35 / 25 kWrapid traverse: 40 m/mintool change unit: 60 -fachdimensions of the machine ca.: 5,5 x 3,5 x 2,7 mtotal power requirement: kWweight of the machine ca.: 14 t- Control Heidenhain iTNC 530- 5-axis- Fixed table with integrated rotary table dia. 750mm (500kg)- IKZ 40 bar- Tool changer 60-fold (SK 40)- Milling head with B-axis- Chip conveyor- Spray gun- 3d Quick Set- BLUM laser measuring system- Direct distance measuring system- 2 Rotary Clean Windows-The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 600 mmy-travel: 580 mmz-travel: 580 mmcontrol: SEICOS 16M B-axis (table): 360 x 1° mmfeed X/Y/Z/-axis: 1 - 50.000 mm/minrapid traverse X/Y/Z: 50,00 m/minturning speed range - stepless: 35 - 12.000 Nmspindle drive: 22,00 kWmax. torque on the spindle: 236 tool taper: BT40 toolpiece magazine: chain magazine: 61 Stücksize of pallet: 2x 400x400 mmmax. workpiece diameter: 630 mmworkpiece height max.: 680 mmworkpiece weight max.: 400 kgtotal power requirement: 30,00 kWweight of the machine ca.: 12,00 tdimensions of the machine ca.: 4,00 x 3,50 x H3,00 mWith SEICOS S16M control unit, coolant system, chip conveyor, electron. handwheel, dust exhauster.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 1.035 mmy-travel: 560 mmz-travel: 510 mmCNC-control: Heidenhain TNC620 table-size: 1200 x 560 mmmax. table load: 1000 kgspindle taper: SK 40 spindle turning speed range: 10.000 U/mindrive capacity - spindle motor: 13 kWfeed stepless: 20.000 mm/minrapid traverse: 25 m/mintool change unit: 20 Pos.coolant: IKZ 20 bar voltage: 400 Vtotal power requirement: 17 kVAweight of the machine ca.: 4,1 tdimensions of the machine ca.: 2,55 x 2,30 x 2,25 m- Serial No.: 1539000377A- Machine ON: 21.689 h- Program Run: 9.021 h- CNC-Control: Heidenhain TNC620- elektronic hand wheel- chip conveyor- coolant through spindle 20 barThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Alzmetall AB35 S Column Drilling Machine -Stepless speed control -Automatic feed -Chuck -Drilling capacity steel/GG 32/45mm -Spindle holder 4 MK -Projection 300mm -Table size LxWxH 475mmx615mmx55mm -Quill stroke 160mm -Spindle speeds 57-1340rpm -Feeds 0,1,0,2,0,3mm -Drive motor 380V,1.4/2.2kW Dimensions: LxWxH 0.9x0.6x1.8 meters / Weight 440Kg
MAXION BS 25 AV ST Column Drill -Year of manufacture 2000 -Drilling capacity / steel 30mm -Feeds -Drilling spindle holder MK 3 -Speeds infinitely variable 80-1800 rpm -Drilling spindle stroke 120mm -Projection 260mm -Distance table - drilling spindle 760mm Dimensions: LxWxH 0.7x0.9x1.9 meters / Weight 300Kg
Deckel Maho DMC63V BJ 2009 ( incl. new milling spindle + Y-spindle ) Heidenhain Control
We have two Unisign machines (machining centers) for sale. 2005 and 2007.
DMC 650V with Long Pallet Changer for sale.
Mitsubishi MAF 210/150A Year: 1977 Table Size: 3000 × 3000 mm | Load Capacity: 60,000 kg Axis Travel: X: 14,000 mm | Y: 4500 mm | Z: 900 mm Spindle: Ø164 mm | 4–3460 rpm | 37/45 kW DC motor Control: ISO/EIA compatible | 5-axis interpolation | M-NUX115 DRO Accuracy: ±0.015 mm/m (X/Y), Repeatability ±0.01 mm Included Accessories: • Tool locking (5 pull studs) • Digital readout system • NC controller with startup components • Setup/leveling blocks • Maintenance toolkit • Protective covers Optional Add-ons (upon request): • Chip conveyor and coolant system • Rotary/angled fixturing • Pendant control • Bellows or floor plate systems • Special tooling packages Utilities & Installation: • Power: AC 220V (standard) • Air: 2–7 kg/cm² at 100 L/min • Installation space & foundation info on request
spindle diameter: 160 mmx-travel: 15000 mmy-travel: 4000 mmz-travel: 1000 mmW-axis (spindle longitudinal): 1000 mmTool bore: ISO 50 Control: Fanuc 15T turning speed range:: 4 - 2000 U/minspindle motor: 60 kWfeed range: 3- 10000 mm/minrapid traverse: 10 m/minrotary table dia.: 3000 x 3000 mmworkpiece weight: 60000 kgU-axis: 2000 mmweight of the machine ca.: - tdimensions of the machine ca.: - m- CNC control FANUC 15T- Rotary table 30000 x 30000mm, 60t, U-axis: 2000mm- Panel field 5x 2000 x 5000- tool changer- chip conveyor- Angular milling head- Various accessoriesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Type: Lid Maho DMU35M Year of Make: 2003 Description: Spindle 20-6300rpm 10kW SK40 Feed speed X,Y,Z 5000mm/min Position tolerance (direct measuring system) 0.010mm Travel: X=350mm, Y=240mm, Z=340mm Other: Tool clamping pneumatic Rotary table with swivel axis manual Weight 1600kg Operating hours approx. 4000h Control Siemens NC810D Unfortunately, the tool spindle has a bearing damage and is therefore only able to run to a limited extent.
BAZ Wagner Eumach EBM 3200 BJ2009
4-axis CNC horizontal milling machine Hüller Hille BlueStar5 built in 2007 automatic pallet changer with 2 interchangeable pallets with 4 vices each (125), 4 additional interchangeable pallets (one with mineral casting clamping tower), Renishaw measuring system, high-pressure coolant system with additional filter device, coolant and air through the spindle, 40-fold tool magazine BT40, Operating hours and control see photo
Machine is still energized and fully operational. BAZ Matsuura MAM72 BJ 2006 spindle, and spindle motor were last replaced in 2018. Machine would be free immediately. Scope of delivery: -Machine - 2x additional pallet - Knoll high-pressure system - Machine running time 19,911 hours (see picture)
BAZ Heckert H55 (4 axle) BJ 2019
Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve, spindle sleeve-Adapter sleeve: Morse taper sleeve adapter sleeve 2 pieces-Type: MK3/2-Shipping/Price: complete-Dimensions: Ø 24 x 112 mm-Weight: 0.2 kg/piece
AMARON s.r.o.
