Manufacturer:
(Category: 101)
Key data: 1270 mm, 610 mm, 720 mm
Inv. Num. : 9302 Type: MCV 1270 POWER Producer: MAS Created: 2002 Parameters: Control system: Heidenhain iTNC 530 Operating hours: 1000 h Tool magazine: 24 pieces Maximum vertical spindle speed: 10000 1/min X-axis travel: 1270 mm Y-axis travel: 610 mm Travel distances Z-axis: 720 mm Cone: ISO 50 Machine height: 3300 mm Machine length: 5000 mm Machine width: 3600 mm Machine weight: 11000 kg Equipment: Technical documentation Workpiece probes Tool probe IKZ (15 bar) 10/2020: Machine completely cleaned and repaired Air hoses of the machine replaced Tool/workpiece cooling hoses replaced Piston rod of tool magazine sealed Air/oil clamping distributor sealed Piston seal of tool clamping sealed at the top of the spindle Automatic lubrication of the machine tested 8/2022: Main power module from SIEMENS completely repaired AC/DC converte ...
Key data: 1600 mm, 1250 mm, 1000 mm
Vertical machining center Manufacturer: DMG Type: DMU 160 P duoBLOCK Year of Make: 2007 Control: Heidenhain ITNC 530 Axes: 5-axis simultaneous Travels X: 1600 mm Y: 1250 mm Z: 1000 mm Tool changer: 60 tool positions Speed: 18,000 rpm - HSK 63 - Probes - Tool measurement Blum Laser - Coolant tank 980 litres - IKZ 40 Bar - Chip conveyors - Electronic handwheel - Operating mode 4 - Preparation of 3-D Quickset (software) - Universal milling head with controlled A-axis Machine from Space Institute. Excellent condition. Errors and prior sale excepted.
Used Drilling and Milling Machine Manufacturer: PAMA FT 180 A YOC 1982 Travel distances: X = 12000 mm Y = 4500 mm Z = 1700mm approx. Control: Siemens Sinumeric840 Tool changer: 60 times 3 pcs PAMA heads. Drills, milling machines, etc. Without table Plates are included. From the foundation.
Boring mill table used. Table load: 40 tons. Table dimensions: 2500 x 3500 mm Table displacement: 1600 mm Condition: Good. Can be demonstrated
used
Drilling Ø: 28/35 mm Spindle holder: MK 3 Projection: 293 mm Table size: 400 x 400 mm Table swivel on round column and height-adjustable via hand crank and rack Large distance between table and drill quill: 630 mm Quill stroke: 180 mm Spindle speeds in 4 groups adjustable: 65 - 1750 rpm Drive motor: 380 V, 0.9/1.5 kW Weight: 340 kg Space requirement: 600 x 920 x 1880 mm
Drilling Ø in steel/GG 20: 40/55 mm Spindle holder: MK 4 Projection: 345 mm Table size: 450 x 600 mm Distance between table and drill quill: 785 mm Quill stroke: 180 mm Spindle speeds in 4 groups by pole-switching. Engine and manual transmission as well as infinitely variable control: 160 - 1540 rpm 4 automatic feeds: 0.09; 0,12; 0.18 and 0.22 mm/rev Drive motor: 380 V, 2.6/3.2 kW Weight: 640 kg Space requirement: 700 x 1150 x 2000 mm
5-axis machining centre with tool changer for aluminium or PVC profiles Max. machining length: 18,000 mm Y-axis travel: 1150 mm Travel Z-axis: 715 mm Swivel angle A-axis: 0° - 180° Angle C-axis: 0° - 180° Max. speed 24,000 rpm Spindle power: 21 kW Tool changer with 13 standard and 7 special tools Many tool holders, including angle head and saw blade Saw blade diameter: 500 mm Minimum quantity spraying Autonomous tensioner displacement 20 pneumatic material tensioners Pendulum operation through two light barrier areas Label Printers Barcode scanner Chip conveyor belt Suction Manual control panel Spindle in mint condition (pull-in force is just under 16 kN) Loading is included in the price Weight: approx. 14,000 kg
x-travel: 760 mmy-travel: 460 mmz-travel: 460 mmcontrol: TNC 620 HeidenhainMain spindle:: turning speed range - main spindle: max. 12.000 min/-1power capacity - main spindel: 14 / 10 kWTorque: 89 / 63,7 Nmtool taper: SK 40 work table:: table surface area: 900 x 410 mmmax. table load: 350 kgT-slots: 4x Tool-Presetter:: number of toolpositions: 24 pos.max. tool diameter: 130 mmmax. tool length: 200 mmmax. tool weight: 8,0 kgfeeds:: rapid traverse ( X / Y / Z ): 36 m/mintotal power requirement: 20 kVAweight of the machine ca.: 3,3 tdimensions of the machine ca.: 3,0 x 2,5 x 2,9 mDocuments: digital Chip-Tray: Automatic Tool Changer: Coolantsystem: interface 4. axis: work light: test probe: Blum TC 50 elektr. hand wheel: integriert / integratedTailstock: TTS-125 indexing attachment: CNC Machiningcenter VerticalSPINNER - VC 750The data for this ad was created with ModulMWS - the soft ...
Drilling Ø: 28/35 mm Spindle holder: MK 3 Projection: 293 mm Table size: 300 x 440 x 500 mm Table swivel on round column and height-adjustable via hand crank and rack Large distance between table and drill quill: 630 mm Quill stroke: 180 mm Spindle speeds adjustable in 4 groups: 65 - 1750 rpm Drive motor: 380 V, 0.9/1.3 kW Weight: 340 kg Space requirement: 1100 x 900 x 1880 mm
A Hedelius CNC 3-axis machining center is available. Travel X/Y/Z: 2490mm/630mm/750mm, table dimensions X/Y: 3200mm/650mm, tool holder: SK40, spindle speed: 8000rpm, tool positions: 48, coolant tank volume: 350l. Machine dimensions X/Y/Z: approx. 6500mm/3700mm/3700mm, weight: approx. 16500kg, control: Heidenhain TNC426. Including coolant tank, divided working area, chip conveyor and through-tool coolant. Documentation available. An on-site inspection is possible.
A CNC 5-axis pentapod machining center Metrom is available. Axes: 5, Travel X/Y/Z/V: 1600mm/2800mm/1000mm/3200mm, A-axis swivel: 90°, Table dimensions X/Y: 1600mm/1800mm, Tool interface: HSK63, Speed: 15000rpm, Spindle power: 25kW/32kW. Machine dimensions X/Y/Z: approx. 6500mm/4000mm/4500mm, Weight: approx. 14000kg, Control: Andronic 2060. Including enlarged worktable, coolant system with 200l tank, Blum TC 50 3-D touch probe, additional holder and milling spindle. Documentation available. An on-site inspection is possible.
Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve, spindle sleeve -Adapter sleeve: Morse taper sleeve adapter sleeve -Type: MK3/2 -Dimensions: Ø 24/195 mm -Weight: 0.5 kg
Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve, spindle sleeve -Adapter sleeve: Morse taper sleeve MK4/3 -Dimensions: Ø 32/140 mm -Weight: 0.4 kg
Machine reamers, reamer, reaming tool, locating knife cutting set -Mounted reamers: Machine reamers, 2 pieces -Type: Ø 79.5 mm Mounting 29/33 mm -Type: Ø 80 mm Mounting 37/40 mm -Submission/Price: complete -Transport dimensions: 160/80/H90 mm -Total weight: 3.8 kg
Key data: 560 mm, 510 mm, 510 mm
Inv. Num. : 9279 Type: HTC 400 Producer: MAZAK Created: 1998 Parameters: Control System: Mazatrol Work table length: 400 mm Work table width: 400 mm Maximum table load (even): 300 kg Spindle drive power: 5.5 kW Maximum spindle speed: 10000 1/min X-axis travel: 560 mm Y-axis travel: 510 mm Travel Z-axis: 510 mm Number of stacking positions: 24 pieces
Vertical machining centre HYUNDAI SPT-V550D - corse 570x410x580 mm, CNC SIEMENS 810D - rotopallet, Information about technical data are not binding., Machine available subject to prior sale., Working table size: 650x410 mm (2), Longitudinal travel x axis: 570 mm, Cross travel y axis: 410 mm, Vertical travel z axis: 580 mm, Working feed x-y-z axes: 0 - 36.000 mm/1, Rapid feed x-y-z axes: 36 mt/1, Spindle taper type: 40 DIN-BT, Automatic tools change nr.: 24, Spindle speed: 0- 10.000 rpm, Spindle motor power: 18,5 Kw, Cnc: SIEMENS 810D, Approx net weight: 6.000 Kg, accessories: coolant thrugh spindle
x-travel: 2600 mmy-travel: 1100 mmz-travel: 920 mmtool magazin:: 30 internal coolant system feed: 40 Bar tool taper: SK50 total power requirement: --- kWweight of the machine ca.: 26,1 tdimensions of the machine ca.: --- mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
POS POSmill CE 1000Year of manuf. : 2022 Control : Heidenhain TNC 640 Speed : 10000 rpmMovement X/Y/Z : 1000/600/600 mmTool holder : SK40 ____________Description:Spindle:Technology:Belt driveSpeed:10,000 rpmTool holder:SK40Media feed-through:Blown air + cooling lubricantWorking table:Clamping surface:1,200 x 600 mmTableloading (max.):750 kgGeneral:Tool magazine:40 stationsFeatures/Accessories:Coolant Management:IKZ system with filter and high pressure, 20 barChip Management:Chip conveyorWorkpiece Measurement:25.50-HDRTool Measurement:Pick UP wireless 35.40 TSPosition Measurement System:Heidenhain linear measurement system (direct) X/Y/ZSetup Mode:Electronic handwheel
Standard holders and accessories, attachment holders, SASSEX spiral drill bits, Sassex spiral drill bits, reaming bits, Sassex reamers, Sassex drill bits, drill bit holders -Manufacturer: Sassex, spiral drill bits, 33 pieces -Type: E16 / E17 Ø 40 to 128 mm -Submission/Price: complete -Mounting bracket: available in stock for an additional charge -Transport dimensions: 530/340/H50 mm -Weight: 15 kg
Control Heidenhain iTNC 530 Travel X/Y/Z: 2200 x 560 x 720 mm Spindle speed 18,000 min-1 Clamping area 2600 x 600 mm Max. table load 2200 kg Swivel head IKZ 25 bar Tool magazine for 30 Wkz, SK 40 Choice of C- or A-axis Measuring Probe Heidenhain TS 640 Chip conveyor Paper Belt Filter
With CNC control, HEIDENHAIN, type: TNC 155, with touch probe Travel: x=700 y=550 z=550mm. Size table area 1000 x 490 mm Accessories: Chip conveyor / coolant system / tool holders SK3. Machine is presentably ready for operation under power. Milling machine with protective cabin. The milling machine can be operated at any time without protective cladding and is then "quite handy". Dimensions of milling machine: , width is 1.6m, depth is 2.3m, height is 2.15m and cabinet width is 1.5m
General Manufacturer: Alzmetall Type: AC 32/AS Year of Make: 1991 Performance Drilling capacity St 60: D32 mm, v=20 m/min, s=0.27 mm/rev Drilling capacity GG 20: D40 mm, v=20 m/min, s=0.27 mm/rev Drilling capacity St 60: D45 mm, v=20 m/min, s=0.15 mm/rev Tapping capacity St 60: M 24 Threading capacity GG 20: M 30 Drive Main drive: 3 kW – 1,500 rpm Main spindle speed range: 55 – 5,000 rpm Feed Feed drive: automatic, infinitely variable Feed speed: 1 – 3,000 mm/min Rapid traverse: 3 m/min Spindle Tool holder: MK4 Spindle head diameter: 46 mm Quill stroke: 180 mm Projection: 322 mm Column diameter: 145 mm Table Table clamping area: 415 mm x 508 mm Number of T-slots x width x spacing: 5 x 14 x 100 Table stroke: 663 mm Distance from spindle table max: 663 mm Spindle-machined base plate distance: 1,083 mm Dimensions and weight Dimensions: 720 mm ...
vertical machining center, year 2009, CNC (controllo Haas CNC, programmazione G-code ISO). Used machine. More info & price on IndustrialBuyer.
Offered is a Fehlmann CNC universal milling machine. Travel X/Y/Z/W: 700mm/315mm/178mm/495mm, feed rate X/Y: 9m/min, feed rate Z/W: 4m/min, rapid traverse X/Y: 9m/min, rapid traverse Z: 4m/min, table dimensions X/Y: 1130mm/350mm, max. table load: 250kg, spindle taper: SK30, tool positions: 32, max. speed: 9200rpm, spindle power: 5kW, drilling capacity in steel: 30mm, reach: 370mm, distance table-spindle: 620mm, control: Heidenhain. Weight: approx. 3400kg. Inspection possible by appointment.
x-travel: 760 mmy-travel: 550 mmz-travel: 300 mmControl: RMS6V3.15 tool change unit: 25-fach tool taper: HSK E40 turning speeds: 42.000 U/mintable-size: 860 x 550 mmtable load: 800 kgtotal power requirement: 14 kWweight of the machine ca.: 5200 kgdimensions of the machine ca.: 2,5 x 2,1 x 2,55 m3-axis high-speed machining centre, Roeders RFM760, year of manufacture 2000, installation in 2001Key specifications:Roeders RFM760 high-speed machining centre with accessories (tool holders, tool shrink-fitter, etc.).The machine is fully operational, well-maintained, serviced and powered up (battery maintenance).• Spindle: Newly fitted in December 2022, in use until March 2023 – Estimated running time approx. 75 hours (de-registered by the company in March 2023)• Control system: Röders, software: RMS6V3.15 (211)• Operating system: Windows NT• Complete s ...
x-travel: 2050 mmy-travel: 520 mmz-travel: 520 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mCNC control Heidenhain TNC 4302x 32-fold tool changercoolant device2x chip conveyormeasuring feelerThe hole X-axis travel is 2050mm. You can work in one move 2 meters.A dividing wall is also with the machine. Then the X-travel will be split.Technische Daten / technical details:X-Weg / X-travel 2050 mmY-Weg / Y-travel 520 mmZ-Weg / Z-travel 520 mmSpindelaufnahme / spindle taper SK40 Drehzahlbereich / spindle speed 12000 UpM /rpmWerkzeugwechselmagazinplätze / number of tool places in changer 2x 32 Antriebleistung Spindel / drive capacity spindle 36 kWGewicht ca. / weight 12800 kgTechnische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the ...
x-travel: 600 mmy-travel: 400 mmz-travel: 510 mmtable-size: 800 x 400 mmControl: HEIDENHAIN iTNC 530 spindle turning speed - stepless: 12.000 U/minfeed speeds - directly programable: 30.000 mm/mintool taper: ISO40 tool magazin:: 20 total power requirement: 25 kWweight of the machine ca.: 4,2 tdimensions of the machine ca.: LTH 3,5 x 2,1 x 2,95 mControl unit operating time: 32,790 hours.Spindle operating time: 10,310 hours.Includes Heidenhain electric handwheel.Includes electric touch probe.Includes internal coolant supply.Includes chip conveyor.Includes Gressel Gripos machine vise.Includes USB port.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A CNC machining center by Hurco requiring repair is offered, including spindle through-coolant and a chip conveyor. Travels X/Y/Z: 1625mm/860mm/760mm, operating hours: approx. 39025h, max. spindle speed: 8000rpm, tool stations: 40, tool holder: HSK40, cover of the Z-axis is defective. Inspection possible by appointment.
A repair-required Hurco vertical 3-axis machining center is offered, including spindle through-coolant, 3D tool and a chip conveyor. Travels X/Y/Z: 1270mm/660mm/610mm, rapid traverse: 30m/min, feed rate: 15m/min, operating hours: approx. 47646h, max. spindle speed: 12000rpm, tool positions: 40, tool holder: HSK40, control system: Winmax. Bearing damage in the X-axis. A new spindle was installed in 2018. Inspection possible by appointment.
A Hurco CNC vertical machining center is available. Spindle power: 15kW, torque: 238Nm, travel X/Y/Z: 1060mm/510mm/610mm, table dimensions X/Y: 1020mm/610mm, tool holder: SK40, tool stations: 24, spindle speed: 10000rpm. Machine dimensions X/Y/Z: approx. 2800mm/3050mm/2800mm, weight: approx. 5900kg, control system: Ultimax. An on-site inspection is possible.
