Manufacturer:
(Category: 101)
An old pillar drilling machine Gillardon is available. Drilling capacity steel/cast iron: 32mm/40mm, quill stroke: 140mm, spindle taper: MK3, speed: 2800rpm, column diameter: approx. 115mm, throat depth: approx. 250mm, drill table dimensions X/Y: 400mm/400mm, weight: approx. 300kg. An on-site inspection is possible.
Union boring mill CBFK 150/2 from 1990 for sale. Is currently still in use,. Technical details / accessories / addition: x-travel 3000 mm y-travel 2000 mm z-travel 1600 mm Spindle diameter 150 mm Spindle holder ISO 50 Spindle stroke 700 mm Spindle speeds - infinitely variable 5 - 2500 rpm Rapid traverses 10000 mm/min Table clamping area 1600 x 2000 mm Workpiece weight approx. 20 t Spindle drive motor 50 kW Feeds x/y/z - infinitely variable 1 - 9999 mm/min Table positioning 360,000 ° Total power requirement approx. 70 kW Machine weight approx. 40 t Dimensions approx. 6.0 x 8.0 x 4.5 m In 2005: new 5-axis CNC control Dr. Heidenhain TNC 430 - electron. Handwheel HR 410 for all axles with V24 interface, punched tape reader, new electrics, new hydraulics, new servo motors, 60-speed chain tool change magazine model WM III k02 B-axis (round table adjustment) 360,000 ...
Bench drill, pillar drill, column drill, column drill -Manufacturer: WMW Heckert, bench drilling machine type BT 2 -Clamping table: 340 x 280 mm -Travel: 350 mm -Spindle holder: MK2 -Projection: 215 mm -Speeds: 355/710/1400/2800 rpm -Column: diameter 93 mm -Spindle stroke: 100 mm / depth stop with fine adjustment -Motor: VEM 0.8/1.0 kW with brake -Voltage: 380 V -Number: 2x drill available -Price: per piece -Dimensions: 550/480/H1270 mm -Weight:157 kg/piece
CNC Vertical Machining Center HERMLE C 250 U With track control Heidenhain TNC 640 Year of Make: 2016 Travel : X 600 Y 550 Z 450 Speed range : 20 – 18,000 rpm infinitely variable With the following accessories: NC swivel rotary table Ø 450 mm x 360 mm ( T grooves for SRT ) Vertical tool changer with 30 magazine positions ( HSK 63 ) KinematicOpt Hardware IKZ 40 bar with paper belt filter Sealing air for scales Police filter IKZ 40 bar Scraper belt conveyor Chip wagon 450 Ltr. Coolant Facility ́ Blow-off device Manual Cab Door , Manual Cab Roof Polycarbonate Safety Lenses Electronic Heat Compensation iTNC 530 Electronic handwheel Tool Measurement BLUM Laser 3 D Probe Heidenhain Chip rinsing gun Oil mist extraction Control cabinet cooling unit ( RITTAL) 4 Pieces Height Adjustable Machine Shoes Operating instructions
Inv. Num. : 8721 Type: BA 400-2 Producer: SW Created: 2003 Parameters: Control system: Siemens Sinumerik 840D Maximum spindle speed: 10000 1/min X-axis travel: 400 mm Y-axis travel: 400 mm Travel Z axis: 400 mm Number of stacking positions: 4x30 pieces Number of Spindles: 4 Equipment: Conveyor Cooling Knoll KTS 25-60-T
SPINDEL 115 , ISO 50 , X,Y,Z - 2000 DRO TABLE 1400 X 1600
Year of construction 2008 Control Mazatrol PC Fusion 640 M Travel X-axis: 1,700 mm Y-axis: 1,400 mm Z-axis: 1,400 mm Milling spindle Drive power: 37 kW Max. speed: 10,000 rpm NC rotary table 0.001° Indexing, 360,000 Positions Pallet Changer – Palletech 6 pallets Pallet size: 1,000 x 1,000 mm Setup station Tool magazine 120 tool positions BT-50 More options NC4 laser Renishaw OMP60 Probe Synchronized Threading Detachable handwheel CNC Performance Package Mayfran Concep Chip Conveyor with Drum Filter 70 bar high pressure pump
spindle diameter: 130 mmx-travel: 3500 mmy-travel: 2000 mmz-travel: 1250 mmw-axis: 800 mmb-axis: 360 °table:: 1800 x 2200 spindle turning speed range: 3000 U/minfeed range: 4 - 3000 mm/mintable load: 12 tspindle taper ISO: 50 spindle motor: 37 kWrapid traverse: 10 m/minControl: Heidenhain iTNC 530 b-axis: 360 °total power requirement: ca 70 kWweight: 36 trange L-W-H: 8 x 8 x 3,5 mequipped with:- CNC control Heidenhein iTNC 530 & handwheel- clamping table 1800 x 2200mm, 12t-- full B-axis with 360,000 positions- coolant- IKZ 20bar & extern cooling- BLUM TC 60 Taster- without chip conveyorca 11500 Spindle HoursThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle diameter: 150 mmx-travel: 14300 mmy-travel: 4100 mm: 1000 mm: 2500 mm: 900 mm: ISO 50 : 5,5 - 1000 U/min: 55 kW: 4000 x 3500 mm: 60 tcontrol: Fagor 8055 total power requirement: - kWweight of the machine ca.: - tdimensions of the machine ca.: - m- Fagor 8055 CNC control- CNC rotary table (hydrostatic) 4000 x 3500 mm, 60 t- Coolant system (external)- Telescopic covers for the guideways- Operator platform attached to the spindle box- Plate field 2x 6000 x 2000 mm eachThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle diameter: 250 mmx-travel: 12000 mmy-travel: 5850 mmz-travel: 1600 mmw-axis: 2000 mmControl: Siemens type: 840 D Powerlineturning speeds: 875 U/mindimension of the ram: 540x560 mmcoolant: 1800 lchip conveyor: total power requirement: kWweight of the machine ca.: 130 tOverhaul of the machine 2010Spindle mount SK 60/50 with adapterTraversing speed: Axis X/Y: 9,000 mm/min.Travel speed: Z/W axis 4,000 mm / min.The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours ...
Travel X/Y/Z: 630mm/630mm/630mm, B-axis: 360°, B-axis resolution: 0.001°, Tool holder: SK40, Tool positions: 160, Pallet positions: 6, Pallet dimensions X/Y: 400mm/500mm, Rapid traverse: 40m/min, ICS pressure: 50bar. Machine dimensions X/Y/Z: approx. 5850mm/2500mm/2750mm, Weight: approx. 12500kg, Control: Siemens Sinumerik 840D. Including Blum probe and drill breakage control. Documentation available. An on-site inspection is possible.
Modular vise, jaw width 125mm Gerardi Modular 125 Stable Machine Vise, Drill Vise Total length approx. 345mm Clamping range approx. 150mm Jaw width 125mm with pull-down jaws Additional prism jaw Mechanical clamping actuation with 19mm wrench or ratchet The machine can be demonstrated on site by appointment. We offer only machines that are ready for demonstration in our warehouse, see "other offers of this year". provider".
The machine is in good technical condition, after prior agreement it is possible to test it. X=880, Y=630, Z=630 Rotary table 360, tilting head +120 /-30 32 slots, chip conveyor Rpm=12k
Works well.
Travel column machining centre MAZAK VTC - 300C - II - 1740x760x660 mm, CNC, MAZATROL 640 M, Information about technical data are not binding., Machine available subject to prior sale., Working table size: 2000x760 mm, Longitudinal travel x axis: 1740 mm, Cross travel y axis: 760 mm, Vertical travel z axis: 660 mm, Working feed x-y-z axes: 0 - 36.000 mm/1, Rapid feed x-y-z axes: 36 mt/1, Spindle taper type: 40 DIN-69871, Automatic tools change nr.: 30, Spindle speed: 0- 12.000 rpm, Spindle motor power: 18,5 Kw, Cnc: MAZATROL 640M, Approx net weight: 11.500 Kg, accessories: Chip conveyor, coolant tank, coolant thrugh spindle
x-travel: 2.000 mmy-travel: 1.000 mmz-travel: 1.200 mmcontrol: TNC 430 HeidenhainMain spindle:: turning speed range - main spindle: 20 - 5.000 min/-1transmission ratio: 2 power capacity - main spindel: 30 (100%) / 45 (40%) kWTorque: 1.050 / 1.580 Nmtool taper: HSK 100 swivellable: B: +/- 180 °indexing: B: 0,001 °work table:: table surface area: 1.000 x 2.000 mmmax. table load: 4.000 kgflute distance: 100 mmT-slots: 18 H7 number of T-slots: 10 tool magazin:: number of toolpositions: 40 pos.tool taper: HSK 100 tool changing time: 10 secmax. tool diameter: 250 mmmax. tool length: 400 mmmax. tool weight: 20 kgfeeds:: feed speeds: X,Y,Z: 0 - 20.000 mm/minfeed speeds: B: 10 1/minoutput: X,Z: 15,7 / Y: 8,5 kWoutput: B: 2,5 kWfeed power: 22500 Ntotal power requirement: kWweight of the machine ca.: 23 tdimensions of the machine ca.: 8,0 x 8,0 x 3,3 mChip conveyor: Coolantsystem: high pre ...
x-travel: 500 mmy-travel: 400 mmz-travel: 400 mmControl: TNC 426M HeidenhainMain spindle:: turning speed range - main spindle: 20 - 9.000 min/-1power capacity - main spindel: 9 / 13 kWmax. Torque: 57 / 82 Nmtool taper: ISO 40 DIN 69871swiveling-rotary-table:: table diameter: 700 x 500 mmswivellable: B: 105° (-10°/+95°) man.rotatable: 360° man.max. table load: 200 kgnumber of T-slots: 7 T-slot - distance: 63 mmT-slot - width: 14H7 mmcenter hole: 30H7 mmTool-Presetter:: number of toolpositions: 16 pos.tool taper: ISO 40 DIN 69871max. tool length: 290 mmmax. tool weight: 6,0 kgmax. total weight: 50 kgfeeds:: feed speeds: max. 10.000 mm/minrapid traverse: 12 m/mininput unit: 0,01 mmtotal power requirement: 17 kWweight of the machine ca.: 3,2 tdimensions of the machine ca.: 4,0 x 4,0 x 2,5 mDocuments: Chip-Tray: Coolantsystem: B-axis: man. C-axis: man. Swivel-Rotary-Table: Automat ...
x-travel: 650 mmy-travel: 600 mmz-travel: 500 mmcontrol: Sinumerik 840 D pl SiemensMain spindle:: turning speed range - main spindle: 20 - 28.000 min/-1power capacity - main spindel: 23 / 18 kWmax. Torque: 79 Nmtool taper: HSK-A63 NC-Tilting round table:: table surface area: Ø 630 mmSwivel range: A: +30° / -115 °rotatable: C: 360 °max. table load: 500 kgmax. workpiece sizes: Ø 630 x 313 mmtable speed: A:25 / C:65 min/-1Tool-Presetter:: number of toolpositions: 117 pos.max. tool diameter: 90 (125) mmmax. tool length: 300 mmfeeds:: rapid traverse ( X / Y / Z ): 60 m/minAccelaration: 10 m/s²feed power: 8,5 kNtotal power requirement: 43 kVAweight of the machine ca.: 10,5 tdimensions of the machine ca.: 8,5 x 5,5 x 3,0 mDocuments: high pressure coolant: Coolantsystem: through spindle coolant: 80 bar / 1.300l elektr. hand wheel: Automatic Tool Changer: 117 pos. full splash guard ...
x-travel: 1.250 mmy-travel: 880 mmz-travel: 800 mmcontrol: TNC 430 HeidenhainMain spindle:: turning speed range - main spindle: max. 12.000 min/-1power capacity - main spindel: 15 / 10 kWmax. Torque: 500 Nmtool taper: SK 40 work table:: table surface area: 1.500 x 1.050 mmmax. table load: 2.500 kgnumber of T-slots: 10 T-slot - width: 18 H7 mmT-slot - distance: 100 mmTool-Presetter:: number of toolpositions: 60 pos.max. tool diameter: 80 mmmax. tool-dia with free toolbox: 160 mmmax. tool length: 315 mmmax. tool weight: 8 kgmax. total weight: 100 kgfeeds:: rapid traverse ( X / Y / Z ): 15 m/minfeed speeds: 10.000 mm/mintotal power requirement: 29 kWweight of the machine ca.: 16,0 tdimensions of the machine ca.: 7,0 x 5,0 x 3,3 mDocuments: Chip conveyor: Coolantsystem: Automatic Tool Changer: CNC - Machining Center VerticalDECKEL MAHO - DMU 125 TThe data for this ad was created wit ...
x-travel: 550 mmy-travel: 305 mmz-travel: 460 mmControl: Sinumerik 808D adv. SiemensMain spindle:: turning speed range - main spindle: 10 - 10.000 min/-1power capacity - main spindel: 11 / 7,5 kWmax. Torque: 70 / 48 Nmtool taper: BT 40 work table:: table surface area: 800 x 320 mmmax. table load: 300 kgT-slots: 3x 14 x 100 mmdistance spindle /table: 100 - 600 mmTool-Presetter:: number of toolpositions: 12 pos.tool taper: BT 40 max. tool diameter: 70 mmmax. tool weight: 6,0 kgchange-time tool to tool: 7,0 secfeeds:: rapid traverse ( X / Y / Z ): 10 m/minfeed speeds: max. 10.000 mm/minrepeating accuracy: +/- 0,008 mmpositioning accuracy: +/- 0,01 mmtotal power requirement: 15 kVAweight of the machine ca.: 2,9 tdimensions of the machine ca.: 3,5 x 2,5 x 2,4 mDocuments: swarf management system: Coolantsystem: Automatic Tool Changer: test probe: RENISHAW - Primo CNC-MachiningCenter Ve ...
A CNC 3-axis machining center Stama is available. Travel X/Y/Z: 1000mm/400mm/350mm, table dimensions X/Y: 1500mm/430mm, max. table load: 1200kg. Spindle power: 5.5kW, spindle taper: SK30, tool positions: 12, torque: 47Nm, spindle bearing diameter: 60mm, speed: 6000rpm. Positioning resolution: 0.001mm, positioning tolerance: +/-0.01mm, repeatability: 0.005mm, rapid traverse: 20m/min, feed rate: 5m/min. Drilling capacity (steel): 25mm, tapping capacity (steel): M24, milling capacity (steel) SK30/SK40/aluminum: 150cm³/180cm³/500cm³. Machine dimensions X/Y/Z: approx. 3200mm/2300mm/2500mm, weight: approx. 5500kg, control: Fanuc Series 0-M. Including C-axis and floppy disk drive. Without vises and tool holders (SK30). The cover of the Y-axis ball screw is missing. Documentation available. An on-site inspection is possible.
spindle diameter: 200 mmProcessing width on table: 6000 mmProcessing height on table: 3150 mmProcessing depth: 1985 mmSlide cross-section: 530 x 550 mmtable load: 20 tPlate field size: 16800 x 5500 mmtool taper: SK 60 total power requirement: kWweight of the machine ca.: 173 tdimensions of the machine ca.: m- Additional equipment Angle head large and small- The OB no. is: 22979- The table is the model S20 MP table Size: 2200 x 2500 mm- The processing width on the machine X -Way is 6000 mm- Including 6 plates 5600 mm x 1850 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 28 mm, 300 mm
SerrMac Drill TCO 28 Manufacturer: SerrMac (Italy) Year of Make: 2002 Machine Type: Column Drill / Bench Drill Drilling diameter (max.): 28 mm Drilling depth: 150 mm Projection: 300 mm Spindle mount: Morse taper MK3 Speed ranges: 205–325–1050 / 410–650–2100 rpm (via belt drive, 2 gears) Table size: approx. 500 mm length Construction: solid cast construction Drive: Belt drive with manual feed control
Control: OSP-P 200M X-axis: 1,500 mm Y-axis: 660 mm Z-axis: 660 mm Tool holder: SK 40 MASBT Tool magazine: 32-fold Speed: 8000 rpm Equipment - ONE touch IGF - Hinged belt conveyor - Electronic handwheel - Internal coolant supply 20 bar
Key data: 700 mm, 420 mm, 380 mm
Specifications: Manufacturer: DMG MORI Type: Milltap 700 Year of Make: 2016 Control: Siemens 840D SL Travel: X 700 mm Y 420 mm Z 380 mm Switch-on hours: 32,722 h Program runtime: 24,284 h Spindle running time: 12,539 h Spindle Speed: 10,000 rpm Tool holder: DIN30 NC swivel rotary table Table load: max. 100 kg Swivel range A: -100/+120° Rotation range C: 360° Dimensions and weight Dimensions: 2,500 mm x 1,650 mm x 2,950 mm Weight: approx. 3,400 kg Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: Tool Changer Conveyor IKZ Internal tool cooling with high-pressure system Preparation for automation
x-axis: 1350 mmy-axis: 1150 mmz-axis: 895 mmcontrol: HEIDENHAIN iTNC 530 turning speeds: 15000 U/mintool taper: HSK-A63 surface area: 1100 x 1000 mmmax. table load: 1600 kgnumbers of tools in magazin: 92 spindle drive: 30 / 38 kWA-Axis: -16 / +120 °total power requirement: 58 kWweight of the machine ca.: 12,6 tdimensions of the machine ca.: 5100 x 2300 x 3090 m2023 new Spindlemachine equipped with:- CNC Control Heidenhain TNC 530- swivel head, direct drive ‘High Torque’ motor- Autom. Tool change: 46-position tool magazine- High pressure cooling through spindle– Chip evacuator– Tool control with duallaser– Radio frequency probe– Airthrough spindle– APS(Advanced Process System) & ITC(Intelligent Thermal Control)- Renishaw probeMachine on: 6680h, active drives: 4876h, spindle: 2657hThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 1660 mmy-travel: 760 mmz-travel: 660 mmcontrol: Mazatrol M Plus table surface area: 2000 x 760 mmtable load: 1,0 trapid traverse: 24 m/minturning speed range: 7000 U/minpower capacity - milling spindle: 11 kWtool taper: SK 40 | |no. of tools in the magazine: 2 x 24 Stückweight of the machine ca.: 8,1 tdimensions: 4,2 x 3,2 x 2,8 mVertical Machining Center traveling coloumn- internal coolant- chipconveyor- ext, hand wheelThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 700 mm, 420 mm, 380 mm
Specifications: Manufacturer: DMG MORI Type: Milltap 700 Year of Make: 2014 Control: Siemens 840D SL Travel: X 700 mm Y 420 mm Z 380 mm Machine hours: 52,616 h Spindle Speed: 10,000 rpm Tool holder: DIN30 NC swivel rotary table Table load: max. 100 kg Swivel range A: -100/+120° Rotation range C: 360° Dimensions and weight Dimensions: 2,500 mm x 1,650 mm x 2,950 mm Weight: approx. 3,400 kg Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: Tool Changer Conveyor IKZ Internal tool cooling with high-pressure system Preparation for automation
CHIRON FZ18 S CNC machining center with SK40 rotary table integrated as 4-axis in the control system Control: SIEMENS NUMERIK 810 Not in operation since 2016
Innovac GmbH
