used Boring Mills for sale

The machine is in good technical condition, by prior arrangement there is the possibility of testing. plus drill cube

WMW UNION type: BFKP BJ. obsolete 1983/2012 Control: SIEMENS 840 d 6-axis Spindle hours after overhaul: 2548 h more data see annex AWF-map

table length: 2200 mmtable width: 1500 mmtable load: 6-8 t1500 x 2200 x 800mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Digital Table area 800 x 900 mm Cross-stroke table 1200 mm Drilling depth 700 mm Vertical stroke 900 mm Tool holder ISO 50

spindle diameter: 75 mmtable-size: 1000 x 810 mmtable load: 1,20 tspindle turning speed range: 32 - 1600 U/minThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Spindle size: dia 200 / ISO 70 X travel: 6.000 mm Y travel: 4.500 mm Z travel: 1000 mm W travel: 1.250 mm Spindle speed: 800 RPM Rotary table: - Surface: 3600 x 3600 mm - Travel: 2000 mm

Horizonatl boring mill AFD 100 with tailstock and accesories. - spindle diameter: 100mm - table surface: 1150x1400x1355mm - weight: 15.000kg

INNSE, YOM: Year 1976, retrofitted 2012 Spindle: 200mm Milling spindle: 305mm X: 19800mm Y: 4500mm Z: 1500mm W: 1000mm Table stroke: 3000mm Rotary table: 5000mm Max. loading: 200t

BRAND: IXION YEAR: 2006 MODEL: AUERBACH IA 1 TL APPLICATION TYPE: BORING LOCATION: CZECH REPUBLIC MACHINE TYPE: BORING MACHINE AVAILABILITY: IMMEDIATELY Technical Information GENERAL DATA MEASUREMENTS WIDTH: 2800 MM MEASUREMENTS DEPTH: 2200 MM MEASUREMENTS HEIGHT: 2100 MM MACHINE WEIGHT: 4000 KG CONTROL UNIT BRAND: SIEMENS MODEL: SINUMERIK 802D MAIN DRIVE SPINDLE SPEED RANGE: 6000 1/MIN NUMBER OF AXIS: 4 MOVEMENT X-AXIS MOVEMENT: 600 MM Y-AXIS MOVEMENT: 400 MM Z-AXIS MOVEMENT: 1000 MM WORKPIECE WORKPIECE WEIGHT: 1000 KG TABLE OUTER LENGTH: 700 MM OUTER WIDTH: 500 MM MEDIA POWER CONSUMPTION: 30 KVA Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - TABLE B AXIS INDEXING 360 DEGREES - MAIN SPINDLE POWER 5. 25/3. 7 KW - MAX. TOOL HOLDER DIAMETER 10 X 40 MM - MAX. SPINDLE STROKE 100 MM - W AXIS 250 MM QUALITATIVE MA ...

Spindle size: dia 200 / ISO 60 X travel: 18.000 mm Y travel: 5000 mm Z travel: 1000 mm W travel: 1.300 mm Spindle speed: 700 RPM Rotary table: - Surface: 4500 x 4500 mm - Travel: 2000 mm

Technical data of the used PAMA Speedram 2 boring machine: Spindle diameter: 150 mm Spindle taper: ISO 50 Milling spindle diameter: 254 mm RAM section: 360x400 mm Axes travels: Vertical travel (Y): 3200 mm Column travel (X): 10.200 mm Boring spindle travel (Z): 700 mm Axial stroke of the spindle tube (W): 800 mm Total axes travel (Z+W): 1500 mm Spindle speed: 1600 rpm Feeds rate: Working feeds: 1 + 6000 mm/min Rapid feed (X-Y-Z-W): 10.000 mm/min Power: Spindle motor: 65/40 kW Axis motors (X-Y): 65 Nm/each Axis motors (Z-W): 38 Nm Total power: 105 kW Rotary table: Dimensions: 2000 x 2000 mm Longitudinal travel: 1750 mm Table rotation feeds: 0,001 rpm Rotation feed: 1-1.5 rpm Motor power: 10 hP Max weight on table: 15.000 kg

spindle diameter: 110 mmx-travel: 4000 mmy-travel: 2000 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m Stocknumber 1210014Type of machine Floortype Boring MachineMake PEGARDType AF11Type of control ConventionalSpindle diameter 110 mmX-stroke (mm) 4000Y-stroke (mm) 2000Z-stroke (mm) 300/750Table dimensions (mm) 1200 x 1600 mmTable rotation (degrees) 360 Tool Taper Iso 50Speeds (Rpm) 4 - 1000The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Small jig boring machine PERRIN type AVMachine -No: 367Table size: 500 x 275 mmLongitudinal path X: 410 mmTransverse Y: 280 mmHeadstock Z: 450 mmSpindle mount: MK 2Spindle speeds stepless: 50 - 3200 rpm.Quill stroke: 120 mmExternal dimensions approx.:1100 x 1000 x 1800 mmWith- Coordinate table PTX 40- electr. Contact stroke- mot. spindle head height adjustment- optical longitudinal and lateral displayused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Horizontal CNC drilling and milling machine make PFEIFER type F 105 CNCFabr. -No: 2399, built in 1991Technical specifications:Travel X: 1600 mmY: 1000 mmZ: 1000 mmSpindle diameter: 105 mmSpindle mount: ISO 50Quill stroke: 500 mmDistance from the center of the spindle to the clamping surface: 0 - 1000 mmmax.workpiece weight: 4000 kgSlewing ring diameter: 830 mmClamping area: 1000 x 1200 mmTable height above floor: 875 mmExternal dimensions: 4830 x 3040 x 2700 mmWeight: 10850 kgwith- Control Heidenhain TNC 355- Measuring device actual value display X, Y, Z, W- hydr. Clamping- automatic central lubrication- Liquid cooling device- Ball screws X, Y, Z, W- fixators- Ampere meter- oil cooling- electr. HR 250 handwheel- mech. Hand crossused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not b ...

Horizontal drilling and milling machine make PFEIFER type F 600Make -No: 0179 built in 1955Technical specifications:Spindle mount: ISA 40Cross travel X:1000 mmVertical travel Y:800 mmLongitudinal travel Z:1200 mmTable size: 750 x 680 mmSpindle stroke: 500 mm32 spindle speeds: 10 - 1000 rpm.80 feeds: 0.125 - 6.0 mm/rev.Weight approx.: 4.0 tExternal dimensions approx.: 3500 x 1400 x 2300 mmWith- steady rest- ViseusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Code 71144 Description Horizontal table borer Make PFEIFER Model F 80 / 100 Serial number 2342 Year 1982 Spindle 100 mm Spindle taper 50 ISO Spindle out (W) 500 mm Table 1000 x 850 mm Cross (X) 1200 mm Longitudinal (Z) 800 mm Vertical (Y) 800 mm Distance table-spindle 0 x 800 mm Speeds 18 steps Spindle speeds 14 – 1500 rpm 16 Feeds 0,03 – 6,0 mm/rev Rapids 2500 mm/rev Rapids all directions ( X-Y-Z-W-B) Motor 7,5 kW 380 Volts Accessoiries X-Y-Z axis are BALLSCREWS Tool clamping Pendant control Condition Machine is in very good condition

BRAND: SACEM YEAR: 1995 MODEL: Racem-603 PRODUCTION HOURS: APPLICATION TYPE: BORING LOCATION: SPAIN MACHINE TYPE: BORING MACHINE AVAILABILITY: IMMEDIATELY Technical Information CONTROL UNIT BRAND: NUMMODEL: 1060 MAIN DRIVE SPINDLE SPEED RANGE: 4-2500 1/MINNUMBER OF AXIS: 4 MOVEMENT X-AXIS MOVEMENT: 5000 MMY-AXIS MOVEMENT: 2500 MMZ-AXIS MOVEMENT: 2000 MM WORKPIECE WORKPIECE WEIGHT: 35000 KG MEDIA MAIN ELECTRONIC CONNECTION: 220-380V/ 50 HZ ADDITIONAL EQUIPMENT - SPLITTER - SQUARE Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - SPINDLE DIAMETER 150 MM

HORIZONTAL BORING MACHINE, SAN ROCCO – AL 55 Make: SAN ROCCO (Italy) Model: AL 55 Spindle diameter: 55 mm Spindle speed: 1375 rpm X Axis (Longitudinal travel): 1100 mm Y Axis (Vertical travel): 600 mm Z Axis (Cross travel): 860 mm Spindle (Quill) travel: 400 mm THE MACHINE IS EQUIPPED WITH FACING HEAD

CNC horizontal boring mill with extendable spindle CNC control Fanuc 18i MB (A) Table dimensions 1600 x 1400 mm Table load 7000 kg B-axis minimum increment 0.001 ° Travel X-axis 4200 mm Travel Y-axis 2500 mm Travel Z-axis 1700 mm Travel W-axis 500 mm Spindle holder MAS BT 50 Spindle diameter 110 mm Spindle speed 5 - 2500 rpm Magazine capacity 60 If you have any questions about the machine, as well as a scheduling for the inspection, we ask you to contact us by phone or e-mail.

Technical data Spindle dia 125mm ISA 50 taper stroke of the spindle 800 mm cross travel of table X 1200 mm vert. travel of headstock Y 1400 mm longit. ztravel of the table Z 1620 mm spindle speed infinitely variable 3,5-700 rpm table size 1200 x 1400 mm table load 6000 kg main motor DC 19 kw total input 22,79 kW spindle feed inf. variable 0 - 1,25 mm/rot working feeds inf. variable 0,3 - 1700 mm/min rapid traverse 2250 mm/min fine feed 3mm/min dimension LxWxH 7,4 x 4,8 x 3,6 m weight of the machine 21000 kg DRO Heidenhain

Drilling rig stored

Shunt wound motor Siemens 1GG5164-0KG41-6HU1-Z technical data: see type plate

table-size: 1100 x 810 mmspindle turning speed range: 50 – 2000 U/minspindle taper: MK 4 x-axis: 1000 mmy-axis: 715 mmz-axis: 600 mmtotal power requirement: 2,2 kWweight of the machine ca.: 4,10 tHeidenhain 2-axis digital display,Round table Ø 600 mm,Round swivel table Ø 450 mm,automatic feeds in all directions,3 milling angles,extremely many accessoriesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2.000 mmtable width: 2.000 mmtable load: max. 20 tx-travel: 1.400 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2000 mmtable width: 2000 mmtable load: 25 ttable rotating: 360 °total power requirement: 4 kWweight of the machine ca.: 8 tdimensions of the machine ca.: 3 x 2,9 x 0,9 mBoring mill table Skoda E25A- Boring mill table Skoda E25A- Dead weight: 8,2t- Max. Clamping weight. 25t- First commissioning: 1996- Decommissioned and stored since 2014- All axes are electrically controllable and ready for operation- 360° rotary drilling table ready for operation- Dimensions: see data sheet- Heidenhain rotation measuring system with digital display ready for operation- Heidenhain linear measuring system with digital display ready for operation- Boring mill table fully functionalThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Skoda W 160 H/NR CNC Travel x= 14.500mm (bed is for the travel 18,500mm) Travel Y= 3.150mm Travel Z= 1.600mm Travel W= 1.250mm Spindle diameter 160mm Machine with ball screw Many accessories available: CNC control Siemens SINUMERIC 850 Rotary table ISO 16 2.200 x 2.200mm, capacity 16 ton included Chip conweyor : 19.000 mm + 12.000 mm Floor plates

W 200G with Siemens AC main motor. modernized the main drive by instalation of Siemens AC motor with SIMODRIVE 611. Original built ISO 60 taper and 630 rpm Main data: X=8000 mm Y=4150 mm Z =1600 mm W=2000 mm Spindle dia 200mm ISO 60 spindle speed max 800 rpm Accessories: DRO Philips available as original rotary table E 20 4 floor plates 5600x1880x400mm milling head IFH 1 and IFW 3 counter steady SKODA IOT 4150

W200HC y.m.1988 y5000 x8000 z1600 w2000 ISO60 taper Skoda table S100 3500x4000mm max load 100tons floor plates 3 milling heads

axis X x Y x Z x W: 3350x2510x1600x1600 mm 3 pcs plate 1500x4000x200 mm 1x table SKODA OB20281, diameter 1600x1600 mm, new in 1971 with tools, accessories and screw compressor weight of machine with table 47,5 ton refurbished 2010

SNK BP 130 3.5 CNC HORIZONTAL BORING MILL Age: 2012 FEATURES: FANUC 31I-B5 5-AXIS CNC CONTROL 60 POSITION AUTOMATIC TOOL CHANGER THREAD CUTTING RIGID TAPPING HELICAL INTERPOLATION BUILT-IN "B" AXIS ROTARY TABLE 90 DEGREE POSITIVE SHOT PIN AIR BLOW DEVICE COOLANT THRU SPINDLE (2) ITS CH FACING HEADS (4) ITS CONTROLLED BORING BARS CAPACITY: SPINDLE DIAMETER 5.12 " (130mm) SPINDLE TAPER CAT-50 VERTICAL HEAD TRAVEL, Y-AXIS 98.42 " (2500mm) TABLE TRAVEL, X-AXIS 137.80 " (3500mm) COLUMN INFEED TRAVEL, Z-AXIS 62.99 " (1600mm) SPINDLE TRAVEL, W-AXIS 27.55 " (700mm) ROTARY TABLE SIZE 62.99 "X 86.61" (1600x2200mm) ROTARY TABLE INDEX 0.001 DEGREE ROTARY TABLE TURNING SPEED 1 IPM TABLE LOAD CAPACITY 22.046 LBS SPINDLE SPEEDS 5-2500 RPM SPINDLE SPEEDS INFINITELY VARIABLE 3-RANGES FEEDS, RAPID Y & Z AXES 393.70 IPM FEEDS, RAPID X-AXIS 314.96 IPM FEEDS, ...

HBM Stanko 2A620-1 - with electrical issue

Spindle size: dia 200 / ISO 60 X travel: 9.000 - 22.000 mm Y travel: 4.000 - 5.000 mm Z travel: 1200 mm W travel: 1500 mm Spindle speed: 700 RPM Rotary table: - Surface: 3500 x 3500 mm Bxiuasgo - Travel: 2900 mm

Spindle size: dia 230 / ISO 60 X travel: 9.000 - 24.000 mm Y travel: 5.000 mm Z travel: 1.500 mm W travel: 1.750 mm Spindle speed: 700 RPM Rotary table: - Surface: 3500 x 3500 mm - Travel: 2900 mm

table length: 2200 mmtable width: 2200 mmtable load: 16 ttable adjustment - longitudinal: 1500 mmtable rotating: 360 Gradfeeds - longitudinal: mm/mintotal power requirement: 6,5 kWweight of the machine ca.: 11 tdimensions of the machine ca.: 2,4 x 4,2 x 0,7 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

W100A Parameters 100mm, 1600mm Diameter of working spindle 100 mm Taper in spindle morse 6. Longitudinal adjustment of table (z) 1450 mm Cross adjustment of table (x) 1600 mm Motion of work head on frame (y) 1120 mm Slip out of working spindle (w) 900 mm Clamping area of table 1250 x 1250 mm Dimensions l x w x h 6710 x 3450 x 3000 mm Machine weight 14 000 kg Accessories: face plate, tail stock

Parameters of the machine: Spindle diameter:100 mmTransverse displacement of the table - X-axis:1250 mmVertical displacement of the spindle - Y-axis:1120 mmLongitudinal displacement of the table - Z-axis:940 mmSpindle extension - W-axis:630 mm Description: The machine is in good technical condition, by prior arrangement the possibility of testing. Control HEIDENHAIN TNC426 ■ Handwheel HR410 ■ Motors and drives SIEMENS SCOPE OF REPAIR 2022 ■ Cleaning, revision and reassembly of the machine from groups, ■ Repair of the complete machine geometry (geometry accuracy report on request) ■ Replacement of guide carrier housing and scrapers ■ Grinding of the stator guide surfaces and attachment of hardened rails to the Y-axis angular surface (mating surface lined with TURCITE) ■ Replacement of lighting ■ Replacement of spindle compensating roller bearings ■ Replacement of all ...

Horizontal boring mill WH10NC

Spindle diameter:110 mm Table surface:1250X1250 mm : The machine is in good technical condition, by prior arrangement the possibility of testing. Maximum table load (even) 8000 kg Spindle drive power 34 kW Maximum spindle speed 900 1/min Drive length X-axis (mechanical feed) 1600 mm Drive length Y-axis (mechanical feed) 1250 mm Drive length Z-axis (mechanical feed) 1000 mm Machine weight 27 t

Catalog No. : 6346 Type: WHN 13 A Producer: TOS Made in: 1980 Characteristic: Control system: MEFI CNC 859 Length of the working table: 1600 mm Width of the working table: 1800 mm Maximum rotary speed of the spindle: 2800 1/min X-Axis travels: 2000 mm Y-Axis travels: 1600 mm Z-Axis travels: 1200 mm Power of the spindle: 38 kW Machine weight: 34.600 kg Replaced ball screws. Measuring each IRC axis separately. Drives separately each XYZ axis.

Spindle diameter:130 mmTransverse displacement of the table - X-axis:3500 mmVertical displacement of the spindle - Y-axis:2000 mmLongitudinal displacement of the table - Z-axis:1250 mmMax. Table load:12000 kgMachine dimensions d x w x h:2500X2000X1800 mm Description: The machine is in good technical condition, by prior arrangement there is the possibility of testing.

Control system Heidenhain TNC 415 Spindle diameter 130 mm Tapered hollow spindle ISO 50 Spindle speed range 10 to 1500 rpm Table transverse (X): 3500 mm Rolling headstock stand for (Y): 2000 mm Longitudinal displacement rack (W): 1250 mm Eject working spindle (Z): 800 mm Table load 12 000 kg Machine weight: 36 000 kg

TOS WHN 130 MC used machine Specifications System Heidenhain TNC 426 Working range Spindle diameter 140 [mm] Taper in the spindle ISO 50 Table transverse adjustment (X) 3000 [mm] Vertical headstock adjustment (Y) 2000 [mm] Vertical travel (Z) 1250 [mm] Spindle stroke (W) 560 [mm] 2X Clamping surface 1800 x 1600 [mm] Speed range 10 - 2500 [rpm] Main motor output 37,0 [kW] Max. workpiece weightƒ 8000 [kg] Accessories Tool changer for 60pcs Tool cooling Chip conveyor

TOS WHQ 13 NC Year 2006 CNC Heidenhain TNC 530 Travels : X : 5000 mm Y : 3000 mm Z : 2000 mm W : 800 mm Table 2500 x 1800 mm 25 T 3000 rpm / 37KW

(FP 50-13) - vertical milling head accessories for the WH 10 CNC and WHN(Q) 13 CNC machines milling operations of vertical and in surfaces manually fastening on the machine, manually clamping of tools

Spindle size: dia 230 / ISO 60 X travel: 9000-25000 mm Y travel: 5000 mm Z travel: 1500 mm W travel: 1750 mm Spindle speed: 800 RPM Rotary table: - Surface: 4000 x 4000 mm - Travel: 2500 mm

Machine : Tools for boring mill / radial drilling machine Type: MK5 5 drill bars φ 40, 30, .. L- 280 – 400mm 3 extensions MK5 – MK4 , L-400-520mm 1 boring tool Oerlikon MK5, φ 70, 6-260 5 contact milling mandrels MK5 - φ 16, 22, 27,32,40mm 2 Clarkson gun chucks 1 boring tool MK5, adjustable, φ 60mm 2 Recordings 2 milling cutters: end mills roughing/plain φ 56x100mm, / groove cutters 4 milling cutters: 2 rough/plain φ 40x12o, 2 roughing cutters 1 Reduction from MK5 to SK40 Weight: approx. 70kg kg PRICE : € 700,- ex works ! A - T-slot size: approx. 21.5mm, B-35, thread M20 16 T-slot stones 20 threaded rods M20, L-120 – 400mm 3 x 2 pcs. clamps 4 nuts long, 6 nuts, washers 2 blocks for adjustment with adjustment screw 4 blocks 80 x 60 x40mm (underlay) Price : Euro 400,- ex works ! B - T-slot size : approx. 17, thread M16 20 T-slot stones approx. 17 ...

table diameter: 5600 mmtable load: 150 tx-travel: / mmtotal power requirement: 88 kWweight of the machine ca.: 55 tRound table dm 5600 mm / 150 to loadRound table dia. 5600mm / 150 to load Equipment: Table with drive motorStatus: decommissioned since 1980Machine type:C.T.FDiameter core faceplate: ?3000 mmDiameter ring faceplate: ?5600 mmCore and ring faceplate can be coupled: yesFaceplate divisible into segments: noMax. workpiece weight: 150000 kgTable weight approx.:55000 kgDimensions: Dm 5600 x H 1500 mm filming operationSpeed: 0.1 - 20 rpmRotation levels:4Drive power: ?88 KW milling operationSpeed: 0.0002 - 0.2 rpmPeripheral speed (5000 mm):?3140 mm/minDrive power: ?11 KWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

UNION FLOOR TYPE HORIZONTAL BORING MILL BFP 130/6 Search Note: In 1989 Upgraded Ball screws & Fanuc Servo Drive to the Head Vertical Travel & the Column Transverse Travel. Currently we believe there are 2 Fanuc control cards that are NOT functional and thus the machine control does not boot up and that makes the machine not operational. When the machine did work it worked fine. This is NOT a cnc machine. It still uses the manual pendant for operational control. Column Longitudinal Travel: 18' 3"(5500mm), Rack & Pinion Driven Head Vertical Travel: 98"(25””mm), Driven by Ball Screw & Fanuc Servo Motor Column Cross Travel: 15.7", Driven by Ball Screw & Fanuc Servo Motor Spindle Travel: 39" (27) Spindle Speeds: 4.5 to 900 RPM Spindle Taper: #50 with Power Draw Bolt Facing Plate Diameter: 34" (covers the facing head) Facing Head Diameter: 30.9" Diameter (18) Facing Head Speed: ...

tools and holders

Code 71145 Description Horizontal table borer Make UNION Model BFT 80 / 3-1 Serial number 18301 / 34 Year 1986 Spindle 80 mm Spindle taper ISO 40 Spindle out (W) 710 mm Table 1120 x 1000 mm Cross (X) 1000 mm Longitudinal (Z) 1600 mm Vertical (Y) 1000 mm Distance table-spindle 0 – 1000 mm 24 Spindlespeeds 8 - 1600 rpm Feeds 1 - 2500 mm/min Rapids 3 m/min. Motor 11 kW 380 Volts Size L x W x H 5500 x 3200 x 2800 mm Weigth 9 ton Accessoiries Facing head Ø 460 mm with 180 mm stroke 3 x DRO Heidenhain ( X-Y-Z ) Tool clamping Guideway protection Pendel control Cooling equipment Option ( extra price ) Universal millinghead Condition Machine is in good condition