Manufacturer:
(Category: 101)
BAZ Cover Maho DMU 80P BJ 2010
BAZ Cover Maho DMU 60 T BJ 2002
Max. drilling diameter ... 63mm Spindle holder ... Morse code 6. Machine weight ... 7100kg Max. vertical arm adjustment ... 950mm Spindle speed ... 11-2000 rpm Main engine power ... 5.5kW Total power requirement ... 8.5kVA The machine is in good condition, possible to test under power.
spindle diameter: 130 mmx-travel: 3500 mmy-travel: 2500 mmz-travel: 1600 mmw-axis: 800 mmb-axis: 360 °table:: 1800 x 2200 table load: 25 tfeed range: 10000 mm/minspindle turning speed range: 10 - 3000 U/minspindle taper ISO: 50 spindle motor: 37/46 kWrapid traverse: 10 m/minControl: Heidenhain TNC 640 total power requirement: 70 kWweight: 38 trange L-W-H: 8,5 x 8,6 x 5,5 mmEquipped with:- Heidenhein iTNC 640 CNC control & HR 510 handwheel- HUI 50 automatic milling head- 40-position tool changer (ISO 50)- B-axis in rotary table- Heidenhain optical scales- NC rotary table- Coolant system with paper belt filter, Coolant through Spindle 20bar- Chip conveyor- Heidenhain TS 460 measuring probe- Movable operating platform- Pfannenberg oil cooler- Central lubricationca 4450h Spindle HoursThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 1000 mm, 510 mm, 450 mm
CNC control SEICOS (Sigma) 18M, speed range 120-12000 rpm, 22 / 18.5 KW Tool holder SK 40, tool magazine with 30 places, IKZ mt 15 bar, HSC machine package for precise milling at high feed speed Dimensions: Width x depth x height 2900 x 2400 x 2786 mm, weight approx. 8200 kg Please note: The machine is not usable, tool clamping of the SK 40 mount is defective. Tool changer can therefore not change.
Key data: 800 mm, 800 mm, 800 mm
3D path control Heidenhain iTNC 530, main drive 19 KW (100% ED), 28 KW (40% ED), Tool holder SK 40, chain magazine with 60 places, chip conveyor, rotating viewing disc, Coolant tank with 600 liters, IKZ with 40 bar, switchable to blowing air, universal milling head B-axis, NC rotary table 900mm x 700 mm, infrared touch probe Heidenhain TS 641, electronic handwheel, Operating mode 4, documentation with repair work available. Spindle hours Total 13,700 of which 680 hours on new spindle replaced 27.02.2024
x-travel: 650 mmy-travel: 500 mmz-travel: 500 mmcontrol: Siemens 840 D table surface area: 800 x 500 mmrapid traverse: 60 m/mintable load: 1,5 tturning speed range: 0 - 18.000 U/minmax. torque on the spindle: 130 Nmpower capacity - milling spindle: 15 kWno. of tools in the magazine: 30 Stücktool taper: HSK 63 A |internal coolant system feed: 40 barweight of the machine ca.: 10,5 tdimensions: 4,10 x 3,90 x 2,90 mHSC- vertical machining with 4th axisEquipment: - coolant system - 3,5 floppy disk - 4th axis - new spindle in 2019The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 650 mmy-travel: 500 mmz-travel: 500 mmcontrol: Siemens 840 D table surface area: 800 x 500 mmrapid traverse: 60 m/mintable load: 1,5 tturning speed range: 0 - 18.000 U/minmax. torque on the spindle: 130 Nmpower capacity - milling spindle: 15 kWno. of tools in the magazine: 30 Stücktool taper: HSK 63 A |weight of the machine ca.: 11 tdimensions: 4,10 x 3,90 x 2,90 mHSC- vertical machining with 4th axisEquipment: - coolant system - Lasersystem for tool measure - 3,5 floppy disk - 4th axis - new spindle in 2016The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Drilling capacity (steel): 50mm, spindle speed: 1700rpm, reach: 45mm-1500mm, workpiece height range: 470mm-1500mm, sleeve stroke: 680mm, quill stroke: 350mm, spindle taper: MK5, max. tool weight: approx. 30kg. Machine dimensions X/Y/Z: approx. 2600mm/1100mm/3500mm, weight: approx. 4000kg. An on-site inspection is possible.
Travel X/Y/Z: 450mm/580mm/400mm, swivel range A/B: -110°/+10°, rotation range C: 360°, table dimensions X/Y: 400mm/400mm, tool positions: 30, tool holder: HSK-E50, spindle speed: 42000rpm, max. workpiece weight: 200kg, feed: 80m/min, max. tool length/diameter: 250mm/80mm. Machine dimensions X/Y/Z: approx. 3250mm/2950mm/2900mm, weight: approx. 9500kg, control: Heidenhain iTNC530. Documentation available. An on-site inspection is possible. The machine is located in China.
Travel X/Y/Z: 3000mm/2300mm/1600mm, travel W: 700mm, max. table-to-spindle distance: 2300mm, table dimensions X/Y: 1800mm/2200mm, max. table load: 10000kg, spindle diameter: 130mm, spindle speed: 2500rpm, rapid traverse X/Y/Z: 10m/min, rapid traverse W/B: 5000mm/min/500mm/min, feed X/Y/Z: 4m/min, tool holder: BT50, tool positions: 38, positioning accuracy X/Y/Z: +/-0.008mm, positioning accuracy W: +/-0.012mm, repeatability X/Y/Z: +/-0.004mm, repeatability W: +/-0.008mm. Machine dimensions X/Y/Z: approx. 7050mm/7200mm/4800mm, weight: approx. 37000kg, control: TOSNUC-888. Documentation available. An on-site inspection is possible.
x-travel: 1350 mmy-travel: 950 mmz-travel: 600 mmControl: MAX 5 total power requirement: 35 kWweight of the machine ca.: 14 tdimensions of the machine ca.: 3100x4535x3495 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A Mazak CNC vertical machining center is available. Travel X/Y/Z: 1660mm/760mm/660mm, spindle power: 11kW, spindle speed: 7000rpm, table dimensions X/Y: 2000mm/760mm, max. workpiece weight: 800kg, rapid traverse X/Y/Z: 24m/min/24m/min/20m/min, feed: 5m/min, tool positions: 24. Machine dimensions X/Y/Z: approx. 4350mm/3400mm/2850mm, weight: approx. 8700kg. Documentation available. An on-site inspection is possible.
MÜGA high-speed drilling-milling centre TYPE: S 3030 with 2-fold pallet changer incl. chip conveyor (similar to FANUC or BROTHER) Control: MITSUBISHI M70 Travel: X/Y/Z: 300 x 250 x 250 mm Spindle speed: 60 – 10,000 rpm. Motor power: 100//30% ED 2.2/3.7 kW Star turret: 12-speed Tool change time: 1.6 sec. Chip-to-chip time: 2.5 sec. Tool holder: BT 30 - 45° 2-fold pallet table: LxW: 400 x 250 mm Chip conveyor ejecting backwards Rapid traverse: X/Y/Z: 48/48/60 m/min. Installation area: L x W x H: 2690 x 1570 x 2370 mm Weight: 3300 kg Total connected load: 11.5 kW Description: The machine is suitable due to the 2-fold pallet system, as well as the high rapid traverses and fast chip-to-chip time for series part production. From 2011 to 2020, it was used in single-shift operation exclusively for ALU machining. There is no hour meter. The machine is still un ...
Key data: 850 mm, 700 , 500
Hermle C 400 V 3-axis CNC machining center Year of manufacture: 2018 Control: Heidenhain TNC 640 x-travel: 850 mm y-travel: 700 mm z-travel: 500 mm Spindle: HSK-A63 Speed: 15,000 rpm Rigid clamping table: 1070 x 700 mm Tool changer: 38 x Weight: approx. 9.5 t Switch-on hours: approx. 26,000 h Spindle hours: approx. 11,500 h
Key data: 450 mm, 600 , 330
Hermle C 22 U RS05-2 5-axis CNC machining center with robot system Year of Make: 2022 Control: Heidenhain TNC 640 x-travel: 450 mm Y-travel: 600 mm z-travel: 330 mm Spindle: HSK-A63 Speed: 18,000 rpm Swivel table STP: Ø 320 mm Tool changer: 55 x Weight: approx. 8.7 t
Witzig & Frank high-speed radial drilling machine LEO 32 AS Defects: (clamping no longer works, running noises present)
GeneralCNC Turning Centre with C axis and tool drive; Control: CELOS with Siemens 840D sl Operate Work spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmWorking areaSwing diameter over guide ways700 mmTurning diameter410 mmTransverse stroke300 mmLongitudinal stroke850 mmClamping chuck diameter max.315 mmMax. Turning Length800 mmBar diameter max.65 mmMain drive 1Drive power (100% DC)33 kWSpeed range20 - 4000 rpmTorque (100% DC)580 NmC-Axis Speed-200 rpmTorque of C-Axis (holding torque)225 NmAccuracy at point stopping0,01 degreeTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-4000 rpmPower max. (40% DC)11,3 kWFloor space/WeightDimensions (L x W x H)3,99 x 2,69 x 1,99 mWeight approx.6500 KgTechnologie cycle alternating speedTechnology cycle for the ...
x-travel: 800 mmy-travel: 600 mmz-travel: 500 mmtable surface area: 1000 x 560 mmspindle taper: HSK 63 A spindle turning speed - stepless: 20 - 16.000 U/minspindle power: 15 kWmax. torque on the spindle: 9 Nmfeeds x/y/z -stepless: 1 - 30.000 mm/minrapid traverse: 35 m/minfeed power: 8000 NATC: 30 Stationencontrol: HEIDENHAIN, TNC 430 total power requirement: 32 kVAweight of the machine ca.: 7,2 tdimensions of machine L x W x H: 2,75 x 2,30 x 2,95 mAccessories: HEIDENHAIN probe TS 632, various tool fixtures, chip conveyor, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Radial drilling machine BR 56 x 1600 Year of construction: approx. 1965 (estimate) equipped with coolant device and drilling table as optional accessories
The machine is in good technical condition, after prior agreement it is possible to test it. top fully functional only cracked concrete..
Machining center TOS Kurim MCFHD 80 CNC, control system Mefi
bore capacity in steel (diameter): mmarm length: mmworkpiece height max.: mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Offer 24320 Specifications: - Drilling capacity - in steel 13 mm - - in aluminium 15 mm - Drilling spindle holder MK 1 - Drilling depth 70 mm - Projection spindle / column 180 mm - 5 drilling spindle speeds 480 - 4000 rpm - Drive 400 V / 0.45 kW - Height adjustment Drilling table with T-slots 250 x 220 mm - Distance between drilling spindle / table approx. 270 mm - Machined base plate with T-slots 170 x 170 mm - Space requirement approx. W 400 x H 700 x D 500 mm - Weight approx. 100 kg - with keyless chuck 1 - 13 mm
Specifications - Clamping surface (left-right): 390 mm - Clamping surface (front-rear): 420 mm - Control: electronic control - Quill stroke: 120 mm - Speed range up to: 7500 rpm - Tool holder: MK 3 - Connected voltage: 400 V - Mains frequency: 50 Hz - Total height approx.: 1.90 m -Documentation - Weight approx.: 400 kg
Specifications - Clamping surface (left-right): 370 mm - Clamping surface (front-rear): 614 mm - Control: electronic control - Quill stroke: 180 mm - Speed range up to: 55 - 5000 rpm - Projection: 320 mm - Tool holder: MK 4 - Connected voltage: 400 V - Total height approx.: 2.06 m -Documentation - Weight approx.: 600 kg
1 gebr. Column drill, Fabr. Solid, Type SHW 30
Kemmerich Werkzeugmaschinen GmbH
