subcategories
(3rd category level)
Manufacturer:
(Category: 107)
Key data: 6400 mm, 1 mm
used Jorns double bending machine, with the following equipment: - 4 pneum. Clamping finger with short-part clamping finger - Attachment rail - Foot control - Sheet metal cassettes - Upper beam with rebate groove - Hydr. Material thickness adjustment - Clamp and angle stop (Matic) Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out. Working length 6400 mm Sheet thickness max. steel 1.5 mm Sheet thickness max. aluminium 2.0 mm Sheet thickness max. VA 1.0 mm Back gauge (min.) 15 mm Back gauge (max.) 1125 mm Colour anthracite/light grey Total power requirement 20 A Dimensions 7332 x 3721 x 2040 mm Weight 9250 kg Upper beam stroke (opening width) 200 mm Bending angle (max.) 145 degrees Crowning manual without roller scissors Number of stands 5 pieces Insertion depth 1150 mm Machine number K13036
BODOR P3015 fiber laser was built in 2020 in China by Jinan Bodor CNC Machine Co.,Ltd. Distinguished by its use of the most advanced technology available on the market, the machine is the perfect choice for even the most intensive challenges. It enables the precise machining of sheet metal with a maximum length of 3000 mm and a width of 1500 mm by means of a stable 2 kW fibre optic beam. During the machining process, the cutting head with autofocus automatically adjusts the focal position depending on the thickness of the material. The nozzles, in turn, are automatically changed, calibrated and cleaned to ensure reliable operation throughout their service life. All this is completed by the 360° anti-collision system developed by BODOR, which predicts and detects any obstacles. The BODOR P 3015 fibre laser is also extremely easy to operate. The machine operator has an advanced nume ...
BODOR T230 tube and profile fiber laser was built in 2020 in China by Jinan Bodor CNC Machine Co.,Ltd. The machine, which is distinguished by its use of the state-of-the-art technology available on the market, is the best choice for even the most demanding tasks in many industries. It enables precise cutting of tubes and profiles with a square cross-section by means of a stable 1 kW fibre-optic beam. During the machining process, the cutting head with auto focus function stores the focal length values in the control system separately for each type of material. The intelligent technology developed by BODOR, in turn, reduces the piercing time by 90%, regardless of the thickness and type of material. All these solutions reduce energy consumption and the amount of cutting gas to a minimum. The T230 tube laser cutting machine is also extremely easy to operate. The machine operator has an a ...
IZAN MAKINA IZFORM IZ5 roll forming line was built in 2019 in Turkey by İzan Makina – İmalat İnşaat İç ve Dış Ticaret Limited Şirketi. This line, distinguished by the use of the state-of-the-art technology available on the market, is designed for frame constructions. Its extensive machining capabilities allow for the precise, fully automatic forming of C- and U-type cold-formed profiles of various dimensions. These elements are used, among others, in partition walls and bathroom modules. The IZAN MAKINA IZFORM IZ5 profiling machine is offered with extensive equipment, including advanced BIM software and a sheet metal decoiler with a maximum capacity of 3 tonnes. The IZAN MAKINA IZ5 rool forming machine is currently configured for the production of C75x1.2mm and C100x1.2mm profiles. The production cycle is performed by means of a reliable tool head with the following machini ...
Offer 25500 Specifications: - Cutting length 3050 mm - Cutting thickness at 400 N/mm², strength 13 mm - Cutting thickness at 400 N/mm², strength up to 1000 mm, length 15 mm - Cutting angle 0.5 - 3 ° - Number of sheet hold-downs 18 pcs - Stroke rate 10 - 23 min -Mot. Back gauge up to 1000 mm - Rear area protection with light barrier - Front angle stop 1000 mm - HSLX version: - CNC control HACO SC 5 controller when entering the sheet thickness in mm -Auto. Cutting angle adjustment according to sheet thickness - Cutting length limitation -Auto. Positioning of the backgauge (8 programs – 80 sets) with - Digital display and autom. Backgauge retraction - Possibility of mot. Adjustment of the backgauge by 2 push buttons - Drive 400 V / 22 kW - E - Footswitch - Space requirement without support arms approx. W 4200 x H 2250 x D 2200 mm - ...
2005 Amada EM2510NT Excellent condition 45 stations, 4 indexing No loading system A lot of tools and spares Books
- Two-roller technology - 180° arrangement of wheels - Closed work area with coolant and lubricant equipment - Hydraulic roundabout centering device - Gearbox with oil circulation lubrication -Temperature Specifications: Workpiece diameter (max.): 360 mm Blank diameter (max.): 380 mm Workpiece length (max.): 600 mm Center width (max.): 1,340 mm Tip width (min.): 200 mm Tool holder DIN 55026: Gr. 11 Force per axis (transverse) (max.): 117 kN Axle force (longitudinal)/feed axle (max.): 140 kN Stroke (transverse): 190 mm Stroke (longitudinal): 690 mm Feed axis speed: (max.) 1.8 m/min Rapid traverse (longitudinal): 7.0 m/min Adjustment roller (axial): 0-20 mm Stroke ejector: 380 mm Ejector force: 26 kN Tailstock stroke: 800 mm Tailstock force: 5-19 kN Speeds (infinitely adjustable): 6-231-387 min-1 25-850-1,550 min-1 Main drive (DC motor): 33 ...
- Gearbox with oil circulation lubrication - Blank counter holder (optional) - Processing unit KA - behind the machine (optional) - Specifications: Blank diameter (max.): 1,200 mm Tip width : 900 mm Tool holder DIN 55027: Gr. 11 Axis force (transverse) (max.): 20 kN Axis force (longitudinal) (max.): 30 kN Stroke (transverse): 360 mm Stroke (longitudinal): 750 mm Cross speed: (max.) 3.0 m/min Longitudinal speed: (max.) 2.0 m/min Stroke ejector: 400 mm Tailstock stroke: 750 mm Speeds (9 levels): 42-660 rpm Main drive: 11 kW Hydraulic drive: 7.5 kW Operating voltage: 400 V Frequency: 50 Hz Connected load: approx. 20 kVA Weight: approx. 6,000 kg
- Hydraulic roundabout centering device - Blank counter holder - Machining unit BAE 1 (on the spindle box) optional 2. - Processing unit KA (in front of the machine) Specifications: Blank diameter (max.): 700 mm Tip width : 825 mm Tool holder DIN 55027: Gr. 6 Axis force (transverse) (max.): 22 kN Axis force (longitudinal) (max.): 20 kN Stroke (transverse): 250 mm Stroke (longitudinal): 400 mm Transverse speed: (max.) 6.0 m/min Longitudinal speed: (max.) 6.0 m/min Stroke ejector: 200 mm Tailstock stroke: 400 mm Speeds (infinitely variable): 100-2,800 rpm Main drive: 11 kW Hydraulic drive: 7.5 kW Operating voltage: 400 V Frequency: 50 Hz Connected load: approx. 20 kVA Weight: approx. 3,500 kg
- Hydraulic roundabout centering device - Blank counter holder - Machining unit BAE 1 (on the spindle box) optional 2. - Processing unit KA (in front of the machine) - Double reel seat Specifications: Blank diameter (max.): 700 mm Tip width : 800 mm Tool holder DIN 55027: Gr. 6 Axis force (transverse) (max.): 22 kN Axis force (longitudinal) (max.): 20 kN Stroke (transverse): 250 mm Stroke (longitudinal): 400 mm Cross speed: (max.) 7.0 m/min Longitudinal speed: (max.) 7.0 m/min Stroke ejector: 200 mm Tailstock stroke: 400 mm Speeds (infinitely variable): 100-3,800 rpm Main drive: 11 kW Hydraulic drive: 7.5 kW Operating voltage: 400 V Frequency: 50 Hz Connected load: approx. 20 kVA Weight: approx. 7,000 kg
However, equipping the PNC 90-3A with three additional PNC/CNC-controlled auxiliary axes now enables a working area of approx. 900x1,100mm and thus an extremely economical production of large printed parts. - Hydraulic roundabout centering device - Blank counter holder - Machining unit BAE 1 (on the spindle box) - Processing unit KA (in front of the machine) - 4-fold tool changer Specifications: Blank diameter (max.): 900 mm Tip width : 1,100 mm Tool holder DIN 55027: Gr. 11 Axis force (transverse) (max.): 45 kN Axis force (longitudinal) (max.): 45 kN Stroke (transverse): 305 mm Stroke (longitudinal): 650 mm Cross speed: (max.) 7.0 m/min Longitudinal speed: (max.) 7.0 m/min Stroke ejector: 300 mm Tailstock stroke: 450 mm Speeds (infinitely variable): 100-2,300 min-1 Main drive: 28 kW Hydraulic drive: 15 kW Operating voltage: 400 V Frequ ...
Workforce: 300 kN/30 t Tool height: 200 mm Stroke length: 0 - 300 mm Bending capacity with prism tool MW 125/240: 200 x 16/200 x 24 mm Bending speed: 0 - 1.3 m/min Drive motor: 380 V, 5.5 kW Weight: 800 kg Footprint: 1250 x 820 x 1120 mm
Shaft Ø: 40 mm Bending Capacity: Flat bar upright at 500 mm Ø: 60 x 10 mm flat at 400 mm Ø: 100 x 15 mm square at 500 mm Ø: 35 mm L-iron leg outwards at 450 mm Ø: 50 x 50 x 6 mm L-iron leg inwards at 600 mm Ø: 50 x 50 x 6 mm T-iron T outwards/inwards at 600 mm Ø: 60 x 60 x 7/50 x 50 x 6 mm Round bar at 500 mm Ø: 35 mm Shaft speed: 7.5 rpm electr. Connection: 380 V, approx. 1.7 kW Space requirement: 910 x 640 x 1400 mm Weight: approx. 400 kg
Cutting length: 2520 mm, cutting thickness: 4 mm, voltage: 380 V, power connection: 16 A. The blades of the shears are likely no longer able to be sharpened due to wear and tear and would need to be replaced. On-site inspection is possible.
Max. bending length: 2040 mm Max. sheet thickness: 3 mm steel Manual and automatic bending process possible Bending angle adjustable via potentiometer Lifting height of the upper beam and material thickness can be preselected via dip switch Manual backgauge with spring fingers Weight: approx. 2300 kg
A complete slitting line Burghardt & Schmidt including a Grindingmaster is available. Uncoiler load capacity: 3000kg, expansion range: 375mm-420mm, knife inner/outer diameter: 80mm/180mm, separator disc dimensions X/Y/Z: 130mm/80mm/1.5mm, recoiler load capacity: 2500kg, usable width: 250mm, cutting performance: 0.1/0.3/0.5/0.8, cuts: 25/20/12/25, material strength: 1800N/m². System dimensions X/Y/Z: approx. 11000mm/5600mm/2000mm, weight: approx. 8000kg. Dokumentation vorhanden. An on-site inspection is possible.
A complete slitting line Burghardt & Schmidt including a Grindingmaster is available. Uncoiler load capacity: 3000kg, expansion range: 375mm-420mm, knife inner/outer diameter: 80mm/180mm, separator disc dimensions X/Y/Z: 130mm/80mm/1.5mm, recoiler load capacity: 2500kg, usable width: 250mm, cutting performance: 0.1/0.3/0.5/0.8, cuts: 25/20/12/25, material strength: 1800N/m². System dimensions X/Y/Z: approx. 11000mm/5600mm/2000mm, weight: approx. 8000kg. Dokumentation vorhanden. An on-site inspection is possible.
A high-performance circular shear Aryma for series production of discs and rings made of sheet metal is available. Material thickness: 3mm, max. disc diameter: 150mm, max. square sheet disc diameter: 1000mm, max. octagonal disc diameter: 1250mm, cutting speed: 70m/min, cutting roller diameter: 70mm. Machine dimensions X/Y/Z: approx. 2000mm/1000mm/1750mm, weight: approx. 1500kg. An inspection on site is possible.
sheet width: 3050 mmplate thickness: 16 mmdistance between columns: 3050 mm: 15-1000 mmcutting angle adjustment: ja °cutting gap adjustment: ja mmconnected load: 30 kWweight of the machine ca.: 14,.5 tdimensions of the machine ca.: 4,0 x 260 x 2,55 mHydraulic guillotine shear with- ELGO control for backgauge- Cutting angle adjustment- Cutting length adjustment- Cutting length limitation (time dependent)- Sheet thickness adjustment- Back gauge with clearance function- Cutting line lighting- Side stop- 3 pcs. support consoles- good conditionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 1250 mm, 1 mm
with the following equipment: segmented with quick-clamping system Segment height: 100 mm Division of the segments: 8 x 100 mm 1 x 30/40/50/60/70 mm 1 x right corner 100 mm 1 x corner left 100 mm with engraved measurement numbers in upper and bending beam segments incl. wheels Extras: with window sill insert for the production of head edges, segment height 100mm with depth stop with T-slot rail Working length: 1250 mm Sheet thickness steel: 1.25 mm Sheet thickness aluminium: 2.00 mm Sheet thickness front: 0.80 mm Colour: blue Dimensions: 1730 x 740 x 1180 mm Machine weight: 290 kg without roller scissors Opening width: 90 mm Bending angle (max.: 150 mm Machine number: UK 20361
pressure: tplate thickness: 5 mmsheet width: 40 mmtotal power requirement: - kWweight of the machine ca.: - tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
plate thickness: - mmthroat: - mmdistance between roll centers: - total power requirement: - kWweight of the machine ca.: 160 kgdimensions of the machine ca.: - mNo accessories For rolling beadsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
with 5 pairs of splitting knives (manually adjustable), with manual 5 roller straightening mechanism, with motorized guillotine shears for the cross-section, with PLC touch control and foot switch. Machine has been repaired, checked, cleaned by a professional and is fully functional. Test run was carried out. Sheet thickness steel: 1.25 mm Working width: 1250 mm Farbe/Colour grün/lichtgrau Total power requirement: 3.1 kW Machine weight: 1500 kg Straightening rollers: 5 pieces Number of blades: 5 pairs Operator side seen from the inlet side on the left Machine Number: 73350-10
Bending length: 4200 mmpre-bending: 34 mmBending strength: 38 mmpower capacity: kWNumber of rollers: 4 StkAdjustable rollers: Stkdiameter of upper rolls: 540 mmdiameter of lower rolls: 500 mmside roll diameter: 365 mmwork speed: 0 - 8 m/mintotal power requirement: 55 kWweight of the machine ca.: 35 tControl: Haeusler Bendtronic 2.0 dimensions of the machine ca.: 7.5 x 2.1 x 2.4 mEquipped with:- Haeusler BENDtronic 2.0 control system- Smallest possible bending diameter with upper roller Ø540mm: 595mm (depending onspringback)- Roller bearings: Self-adjusting roller bearings- Max. cylinder force against upper roller: 3,245kN- Roller material: 42CrMo4 (1.7225)- Speed compensation between upper and lower roller: automatic whenthe two-roller drive option is selected- Roller adjustment: hydraulic- Tilting of the lower roller and both side rollers for cone bending: infinitely variable from th ...
DMG Mori Seiki LaserTec 50 FineCutting Sauer Laser Machine YOC 2010 Control: Siemens 840 D Power Specifications Max. travel X-axis 540 mm Max. travel Y-axis 500 mm Max. travel Z-axis 700 mm 5-axis laser precision machine for machining diamond tools up to Ø 355 mm and 420 mm in length • Linear actuators in X / Y with an acceleration > 1 g • Highly dynamic torque motors in both rotary axes (B and C axis) • Compact machine design with only 4m² floor space + Keller exhaust air extraction system
Key data: 2540 mm, 8 mm
Max. bending length: 2540 mm Max. sheet thickness: 8 mm steel Upper roller diameter: 200 mm Clockwise and counterclockwise rotation via footswitch Safety rope hoist Conical rounds possible Motorized rear roll infeed Lower roll feed via handwheel with position indicator Weight: approx. 4,500 kg
Offer 25468 Sheet metal – roll forming line for shelves Specifications: - Shelf width approx. 250 mm - Material thickness 1.25 mm - Roll forming unit with 16 roll stations - hydr. Punching unit - Straightening unit make DREHER -Mot. Reel CAMU Load capacity approx. 1.5 T -Control panel - Space requirement / footprint 14 x 1.5 m - Weight approx. 10 T
Key data: 3000 , 1500 , 3000
1. Employs world-leading fiber lasers with a fixed optical path design, eliminating optical path maintenance, reducing operating costs, and ensuring high cutting quality and processing efficiency. 2. The machine tool adopts a gantry structure with a rack and pinion dual servo drive structure, achieving a maximum acceleration of 0.8G, ensuring high-speed and high-precision operation. 3. Stable optical path and control systems that are simple to learn and operate. 4.Uses top-brand fiber lasers, resulting in excellent beam quality, stable output power, and precise cutting.
Key data: 40 , 200 , 1340
The all-electric servo bending machine is one of the products with independent intellectual property rights developed by our company. Special high-load screw and guide rail structure, imported bearing installation, high load-bearing capacity, high positioning accuracy, long life, machine tool rigidity, precision retention, and reliability are close to perfection. By introducing advanced design concepts and scientific design methods, the shortcomings that traditional designs cannot avoid have been solved. This bending machine is fast and simple to program, can realize concurrent linkage of multiple axes, fast feed positioning, and significantly improves the efficiency, accuracy and consistency of bending, which is far superior to traditional hydraulic bending machines, and does not require the use of hydraulic oil, is environmentally friendly and pollution-free. Compared with traditional ...
